Infrastructure

as Code

MANAGING SERVERS IN THE CLOUD

Kief Morris

Infrastructure as Code

Managing Servers in the Cloud

Kief Morris

Beijing Boston Farnham Sebastopol Tokyo

Infrastructure as Code

by Kief Morris

Copyright © 2016 Kief Morris. All rights reserved.

Printed in the United States of America.

Published by O’Reilly Media, Inc., 1005 Gravenstein Highway North, Sebastopol, CA 95472.

O’Reilly books may be purchased for educational, business, or sales promotional use. Online editions are

also available for most titles ( http://safaribooksonline.com). For more information, contact our corporate/

institutional sales department: 800-998-9938 or corporate@oreilly.com.

Editor: Brian Anderson

Indexer: Judy McConville

Production Editor: Kristen Brown

Interior Designer: David Futato

Copyeditor: Amanda Kersey

Cover Designer: Karen Montgomery

Proofreader: Jasmine Kwityn

Illustrator: Rong Tang and Rebecca Demarest

June 2016:

First Edition

Revision History for the First Edition

2016-06-07: First Release

See http://oreilly.com/catalog/errata.csp?isbn=9781491924358 for release details.

The O’Reilly logo is a registered trademark of O’Reilly Media, Inc. Infrastructure as Code, the cover

image, and related trade dress are trademarks of O’Reilly Media, Inc.

While the publisher and the author have used good faith efforts to ensure that the information and

instructions contained in this work are accurate, the publisher and the author disclaim all responsibility

for errors or omissions, including without limitation responsibility for damages resulting from the use of

or reliance on this work. Use of the information and instructions contained in this work is at your own

risk. If any code samples or other technology this work contains or describes is subject to open source

licenses or the intellectual property rights of others, it is your responsibility to ensure that your use

thereof complies with such licenses and/or rights.

978-1-491-92435-8

[LSI]

Table of Contents

Preface. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xiii

Part I. Foundations

1. Challenges and Principles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Why Infrastructure as Code? 3

What Is Infrastructure as Code? 5

Goals of Infrastructure as Code 5

Challenges with Dynamic Infrastructure 6

Server Sprawl 6

Configuration Drift 7

Snowflake Servers 7

Fragile Infrastructure 8

Automation Fear 9

Erosion 10

Principles of Infrastructure as Code 10

Systems Can Be Easily Reproduced 10

Systems Are Disposable 11

Systems Are Consistent 12

Processes Are Repeatable 12

Design Is Always Changing 13

Practices 13

Use Definition Files 13

Self-Documented Systems and Processes 14

Version All the Things 15

Continuously Test Systems and Processes 16

Small Changes Rather Than Batches 16

iii

Keep Services Available Continuously 17

Antifragility: Beyond “Robust” 17

The Secret Ingredient of Antifragile IT Systems 18

Conclusion 18

What’s Next? 19

2. Dynamic Infrastructure Platforms. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

What Is a Dynamic Infrastructure Platform? 21

Requirements for a Dynamic Infrastructure Platform 22

Programmable 23

On-Demand 24

Self-Service 25

Infrastructure Resources Provided by the Platform 25

Compute Resources 26

Storage Resources 26

Network Resources 28

Types of Dynamic Infrastructure Platforms 30

Public IaaS Cloud 30

Community IaaS Cloud 30

Private IaaS Cloud 30

Antipattern: Hand-Cranked Cloud 31

Hybrid and Mixed Cloud Options 32

Bare-Metal Clouds 32

Deciding on a Dynamic Infrastructure Platform 34

Public or Private? 34

Cloud Portability 37

Mechanical Sympathy with the Cloud and Virtualization 38

Conclusion 40

3. Infrastructure Definition Tools. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Choosing Tools for Infrastructure as Code 42

Requirement: Scriptable Interface 42

Requirement: Unattended Mode for Command-Line Tools 42

Requirement: Support for Unattended Execution 43

Requirement: Externalized Configuration 45

Configuration Definition Files 48

Reusability with Configuration Definitions 49

Working with Infrastructure Definition Tools 50

Provisioning Infrastructure with Procedural Scripts 51

Defining Infrastructure Declaratively 52

Using Infrastructure Definition Tools 54

Configuring Servers 54

iv | Table of Contents

Configuration Registries 55

Lightweight Configuration Registries 56

Is a Configuration Registry a CMDB? 57

The CMDB Audit and Fix Antipattern 58

The Infrastructure-as-Code Approach to CMDB 58

Conclusion 59

4. Server Configuration Tools. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

Goals for Automated Server Management 62

Tools for Different Server Management Functions 62

Tools for Creating Servers 63

Tools for Configuring Servers 64

Tools for Packaging Server Templates 65

Tools for Running Commands on Servers 66

Using Configuration from a Central Registry 68

Server Change Management Models 69

Ad Hoc Change Management 69

Configuration Synchronization 69

Immutable Infrastructure 70

Containerized Services 70

Containers 70

Managing Ruby Applications with and without Containers 72

Are Containers Virtual Machines? 73

Using Containers Rather than Virtual Machines 74

Running Containers 75

Security and Containers 76

Conclusion 78

5. General Infrastructure Services. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81

Considerations for Infrastructure Services and Tools 81

Prefer Tools with Externalized Configuration 83

Prefer Tools That Assume Infrastructure Is Dynamic 84

Prefer Products with Cloud-Compatible Licensing 84

Prefer Products That Support Loose Coupling 85

Sharing a Service Between Teams 85

Service Instance Templates 86

Monitoring: Alerting, Metrics, and Logging 87

Alerting: Tell Me When Something Is Wrong 87

Metrics: Collect and Analyze Data 89

Log Aggregation and Analysis 89

Service Discovery 90

Server-Side Service Discovery Pattern 91

Table of Contents | v

Client-Side Service Discovery Pattern 91

Distributed Process Management 91

Orchestrating Processes with Server Roles 92

Orchestrating Processes with Containers 92

Scheduling Short Jobs 92

Container Orchestration Tools 92

Software Deployment 93

Deployment Pipeline Software 93

Packaging Software 94

Conclusion 96

Part II. Patterns

6. Patterns for Provisioning Servers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99

Server Provisioning 100

A Server’s Life 100

What Goes onto a Server 105

Types of Things on a Server 105

Server Roles 107

Patterns for Creating Servers 108

Antipattern: Handcrafted Server 109

Practice: Wrap Server Creation Options in a Script 110

Antipattern: Hot Cloned Server 111

Pattern: Server Template 111

Antipattern: Snowflake Factory 112

Patterns for Bootstrapping New Servers 112

Pushing to Bootstrap 113

Pulling to Bootstrap 113

Practice: Smoke Test Every New Server Instance 114

Conclusion 115

7. Patterns for Managing Server Templates. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117

Stock Templates: Can’t Someone Else Do It? 117

Provisioning Servers Using Templates 118

Provisioning at Creation Time 118

Provisioning in the Template 119

Balancing Provisioning Across Template and Creation 120

The Process for Building a Server Template 121

Creating Templates for Multiple Platforms 122

Origin Images 123

Antipattern: Hot Cloned Server Template 123

vi | Table of Contents

Baking a Template from an OS Installation Image 123

Baking a Template from a Stock Image 124

Building a Template from a Unikernel 125

Customizing a Server Template without Booting It 125

Updating Server Templates 126

Reheating a Template 126

Baking a Fresh Template 126

Versioning Server Templates 126

Building Templates for Roles 129

Pattern: Layered Template 129

Sharing Base Scripts for Templates 130

Automating Server Template Management 131

Customizing Servers Before Baking 131

Practice: Automatically Test Server Templates 132

Conclusion 132

8. Patterns for Updating and Changing Servers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133

Models for Server Change Management 134

Ad Hoc Change Management 134

Continuous Configuration Synchronization 134

Immutable Servers 135

Containerized Servers 136

General Patterns and Practices 136

Practice: Minimize Server Templates 136

Practice: Replace Servers When the Server Template Changes 137

Pattern: Phoenix Servers 137

Patterns and Practices for Continuous Deployment 138

Pattern: Masterless Configuration Management 139

Practice: Apply Cron 139

Continuous Synchronization Flow 140

The Unconfigured Country 141

Patterns and Practices for Immutable Servers 143

Server Image as Artifact 144

Simplifying Confirmation Management Tooling with Immutable Servers 144

Immutable Server Flow 144

Bootstrap Configuration with Immutable Servers 145

Transactional Server Updates 147

Practices for Managing Configuration Definitions 148

Practice: Keep Configuration Definitions Minimal 148

Organizing Definitions 149

Practice: Use Test-Driven Development (TDD) to Drive Good Design 149

Conclusion 150

Table of Contents | vii

9. Patterns for Defining Infrastructure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151

Environments 152

Antipattern: Handcrafted Infrastructure 153

Defining Infrastructure Stacks as Code 153

Antipattern: Per-Environment Definition Files 155

Pattern: Reusable Definition Files 155

Practice: Test and Promote Stack Definitions 157

Self-Service Environments 158

Organizing Infrastructure 158

Antipattern: Monolithic Stack 158

Avoid “Lift and Shift” When Migrating Infrastructure 160

Dividing an Application Environment into Multiple Stacks 160

Managing Configuration Parameters Between Stacks 162

Sharing Infrastructure Elements 164

Practice: Manage Application Code and Infrastructure Code Together 166

Approaches to Sharing Definitions 167

Practice: Align Infrastructure Design with the Scope of Change 168

Example: An Infrastructure Design for Microservices 169

Running Definition Tools 174

Conclusion 175

Part III. Practices

10. Software Engineering Practices for Infrastructure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179

System Quality 180

Poor-Quality Systems Are Difficult to Change 180

High-Quality Systems Are Easier and Safer to Change 181

Infrastructure Quality Through Code 181

Fast Feedback 181

VCS for Infrastructure Management 182

What to Manage in a VCS 182

Continuous Integration (CI) 183

Continuously Testing Branches Is Not Continuous Integration 183

Who Broke the Build? 185

Ignoring Tests That Fail 186

CI for Infrastructure 187

Continuous Delivery (CD) 187

The Problem with the Integration Phase 187

Deployment Pipelines and Change Pipelines 188

Continuous Delivery Is Not Continuous Deployment 189

Code Quality 190

viii | Table of Contents

Clean Code 190

Practice: Manage Technical Debt 191

Managing Major Infrastructure Changes 192

Feature Toggles 193

Conclusion 194

11. Testing Infrastructure Changes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 195

The Agile Approach to Testing 196

Automating Tests for Fast Feedback 197

Organically Building a Test Suite 197

Structuring the Test Suite: The Test Pyramid 198

Avoiding an Unbalanced Test Suite 199

Practice: Test at the Lowest Level Possible 200

Practice: Only Implement the Layers You Need 201

Practice: Prune the Test Suite Often 202

Practice: Continuously Review Testing Effectiveness 202

Implementing a Balanced Test Suite 202

Low-Level Testing 204

Mid-Level Testing 206

Higher-Level Tests 209

Testing Operational Quality 211

Managing Test Code 212

Practice: Keep Test Code with the Code It Tests 212

Anti-Pattern: Reflective Tests 213

Techniques to Isolate Components for Testing 213

Refactoring Components so They Can Be Isolated 215

Managing External Dependencies 215

Test Setup 216

Roles and Workflow for Testing 218

Principle: People Should Write Tests for What They Build 219

The Test-Writing Habit 219

Principle: Everyone Should Have Access to the Testing Tools 219

The Value of a Quality Analyst 220

Test-Driven Development (TDD) 221

Conclusion 222

12. Change Management Pipelines for Infrastructure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 223

Benefits of a Change Management Pipeline 225

Guidelines for Designing Pipelines 226

Ensure Consistency Across Stages 226

Get Immediate Feedback for Every Change 227

Run Automated Stages Before Manual Stages 227

Table of Contents | ix

Get Production-Like Sooner Rather Than Later 228

Basic Pipeline Designs 229

The Local Development Stage 229

The Build Stage 230

Publishing a Configuration Artifact 231

Automated Testing Stages 233

Manual Validation Stages 234

Apply to Live 235

The Rhythm of the Pipeline 235

Practices for Using a Pipeline 236

Practice: Prove Production Readiness for Every Change 237

Practice: Start Every Change from the Beginning of the Pipeline 237

Practice: Stop the Line on Any Failure 238

Scaling Pipelines to More Complex Systems 238

Pattern: Fan-In Pipelines 239

Practice: Keep Pipelines Short 243

Practice: Decouple Pipelines 243

Integration Models 243

Techniques for Handling Dependencies Between Components 246

Pattern: Library Dependency 246

Pattern: Self-Provisioned Service Instance 248

Providing Pre-Release Library Builds 248

Providing Test Instances of a Service to Consumers 249

Using Test Instances of a Service as a Consumer 250

Practices for Managing Interfaces Between Components 252

Practice: Ensure Backward Compatibility of Interfaces 252

Practice: Decouple Deploying from Releasing 253

Practice: Use Version Tolerance 253

Practice: Provide Test Doubles 254

Practice: Test the Provider with Contract Tests 254

Practice: Test with a Reference Consumer 255

Practice: Smoke Test the Provider Interface 255

Practice: Run Consumer-Driven Contract (CDC) Tests 255

Conclusion 256

13. Workflow for the Infrastructure Team. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 257

Automate Anything That Moves 258

Make the Change Manually 259

Ad Hoc Automation 259

Autonomic Automation 260

Autonomic Automation Workflow 261

Using a Local Sandbox 262

x | Table of Contents

Using Local Virtualization for a Sandbox 263

Example Workflow with Local Testing 265

Using the Virtualization Platform for Sandboxes 266

Codebase Organization Patterns 267

Antipattern: Branch-Based Codebases 268

Pattern: One Trunk per Component 268

Pattern: Single Trunk 269

Workflow Effectiveness 269

Expediting Changes 269

Code Reviews 270

Fitting Governance into the Workflow 271

Conclusion 273

14. Continuity with Dynamic Infrastructure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 275

Service Continuity 276

True Availability 276

Using Dynamic Server Pools for Recovery 277

Software Design for Dynamic Infrastructure 279

Compartmentalizing for Continuity 281

Zero-Downtime Changes 282

Pattern: Blue-Green Replacement 282

Pattern: Phoenix Replacement 283

Practice: Reduce the Scope of Replacement 284

Pattern: Canary Replacement 285

Routing Traffic for Zero-Downtime Replacements 286

Zero-Downtime Changes with Data 288

Data Continuity 289

Replicating Data Redundantly 289

Regenerating Data 290

Delegating Data Persistence 290

Backing Up to Persistent Storage 291

Disaster Recovery 292

Continuous Disaster Recovery 293

The DR Plan: Planning for Disaster 294

Practice: Prefer Rebuilding Things over Cold Standby 295

Continuous Monitoring through the Pipeline 296

Security 298

Automatically Papering over Compromises 298

Reliable Updates as a Defense 299

Provenance of Packages 299

Automated Hardening 301

Automating Security Validation in the Pipeline 302

Table of Contents | xi

The Change Pipeline as a Vulnerability 302

Managing Security Risks with Cloud Accounts 303

Conclusion 305

15. Organizing for Infrastructure as Code. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 307

Evolutionary Architecture 308

Learning under Fire 309

Start with a Trailblazer Pipeline 310

Measuring Effectiveness 311

Agree on Desired Outcomes First 311

Choose Metrics that Help the Team 312

Track and Improve Cycle Time 313

Use Kanban to Make Work Visible 315

Retrospectives and Post-Mortems 316

Organize to Empower Users 317

Pitfalls of the Divided Function Model 317

Adopt a Self-Service Model 319

Take Full Responsibility: You Build It, You Run It 320

Organizing into Cross-Functional Teams 321

Governance through Continuous Change Management 322

Provide Solid Building Blocks 322

Prove Operational Readiness in the Pipeline 323

Sharing Ownership of Operational Quality 324

Review and Audit Automated Processes 324

Optimize for Time to Detect and Fix Problems 324

Conclusion: It’s Never Finished 325

Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 327

xii | Table of Contents

Preface

Infrastructure and software development teams are increasingly building and manag‐

ing infrastructure using automated tools that have been described as “infrastructure

as code.” These tools expect users to define their servers, networking, and other ele‐

ments of an infrastructure in files modeled after software source code. The tools then

compile and interpret these files to decide what action to take.

This class of tool has grown naturally with the DevOps movement. 1 The DevOps

movement is mainly about culture and collaboration between software developers

and software operations people. Tooling that manages infrastructure based on a soft‐

ware development paradigm has helped bring these communities together.

Managing infrastructure as code is very different from classic infrastructure manage‐

ment. I’ve met many teams who have struggled to work out how to make this shift.

But ideas, patterns, and practices for using these tools effectively have been scattered

across conference talks, blog posts, and articles. I’ve been waiting for someone to

write a book to pull these ideas together into a single place. I haven’t seen any sign of

this, so finally took matters into my own hands. You’re now reading the results of

this effort!

How I Learned to Stop Worrying and to Love the Cloud

I set up my first server, a dialup BBS,2 in 1992. This led to Unix system administra‐

tion and then to building and running hosted software systems (before we called it

SaaS, aka “Software as a Service”) for various companies, from startups to enterprises.

I’ve been on a journey to infrastructure as code the entire time, before I’d ever heard

the term.

1 Andrew Clay Shafer and Patrick Debois triggered the DevOps movement with a talk at the Agile 2008 confer‐

ence. The movement grew, mainly driven by the series of DevOpsDays conferences organized by Debois.

2 A BBS is a bulletin board system.

Preface | xiii

Things came to a head with virtualization. The story of my stumbling adoption of

virtualization and the cloud may be familiar, and it illustrates the role that infrastruc‐

ture as code has to play in modern IT operations.

My First Virtual Server Farm

I was thrilled when my team got the budget to buy a pair of beefy HP rack servers and

licenses for VMware ESX Server back in 2007.

We had in our office’s server racks around 20 1U and 2U servers named after fruits

(Linux servers) and berries (Windows database servers) running test environments

for our development teams. Stretching these servers to test various releases, branches,

and high-priority, proof-of-concept applications was a way of life. Network services

like DNS, file servers, and email were crammed onto servers running multiple appli‐

cation instances, web servers, and database servers.

So we were sure these new virtual servers would change our lives. We could cleanly

split each of these services onto its own virtual machine (VM), and the ESX hypervi‐

sor software would help us to squeeze the most out of the multicore server machines

and gobs of RAM we’d allocated. We could easily duplicate servers to create new

environments and archive those servers that weren’t needed onto disk, confident they

could be restored in the future if needed.

Those servers did change our lives. But although many of our old problems went

away, we discovered new ones, and we had to learn completely different ways of

thinking about our infrastructure.

Virtualization made creating and managing servers much easier. The flip side of this

was that we ended up creating far more servers than we could have imagined. The

product and marketing people were delighted that we could give them a new envi‐

ronment to demo things in well under a day, rather than need them to find money in

the budget and then wait a few weeks for us to order and set up hardware servers.

The Sorcerer’s Apprentice

A year later, we were running well over 100 VMs and counting. We were well under‐

way with virtualizing our production servers and experimenting with Amazon’s new

cloud hosting service. The benefits virtualization had brought to the business people

meant we had money for more ESX servers and for shiny SAN devices to feed the

surprising appetite our infrastructure had for storage.

But we found ourselves a bit like Mickey Mouse in “The Sorcerer’s Apprentice” from

Fantasia. We spawned virtual servers, then more, then even more. They over‐

whelmed us. When something broke, we tracked down the VM and fixed whatever

was wrong with it, but we couldn’t keep track of what changes we’d made where.

xiv | Preface

Well, a perfect hit!

See how he is split!

Now there’s hope for me,

and I can breathe free!

Woe is me! Both pieces

come to life anew,

now, to do my bidding

I have servants two!

Help me, O great powers!

Please, I’m begging you!

—Excerpted from Brigitte Dubiel’s translation of “Der Zauberlehrling” (“The Sor‐

cerer’s Apprentice”) by Johann Wolfgang von Goethe

As new updates to operating systems, web servers, app servers, database servers,

JVMs, and various other software packages came out, we would struggle to install

them across all of our systems. We would apply them successfully to some servers,

but on others the upgrades broke things, and we didn’t have time to stomp out every

incompatibility. Over time, we ended up with many combinations of versions of

things strewn across hundreds of servers.

We had been using configuration automation software even before we virtualized,

which should have helped with these issues. I had used CFEngine in previous compa‐

nies, and when I started this team, I tried a new tool called Puppet. Later, when spik‐

ing out ideas for an AWS infrastructure, my colleague Andrew introduced Chef. All

of these tools were useful, but particularly in the early days, they didn’t get us out of

the quagmire of wildly different servers.

The problem was that, although Puppet (and Chef and the others) should have been

set up and left running unattended across all of our servers, we couldn’t trust it. Our

servers were just too different. We would write manifests to configure and manage a

particular application server. But when we ran it against another, theoretically similar

app server, we found that different versions of Java, application software, and OS

components would cause the Puppet run to fail, or worse, break the application

server.

So we ended up using Puppet ad hoc. We could safely run it against new VMs,

although we might need to make some tweaks after it ran. We would write manifests

for a specific task and then run them against servers one at a time, carefully checking

the result and making fixes as needed.

So configuration automation was a useful aid, somewhat better than shell scripts, but

the way we used it didn’t save us from our sprawl of inconsistent servers.

Preface | xv

Cloud from Scratch

Things changed when we began moving things onto the cloud. The technology itself

wasn’t what improved things; we could have done the same thing with our own

VMware servers. But because we were starting fresh, we adopted new ways of manag‐

ing servers based on what we had learned with our virtualized farm and on what we

were reading and hearing from IT Ops teams at companies like Flickr, Etsy, and

Netflix. We baked these new ideas into the way we managed services as we migrated

them onto the cloud.

The key idea of our new approach was that every server could be automatically

rebuilt from scratch, and our configuration tooling would run continuously, not ad

hoc. Every server added into our new infrastructure would fall under this approach.

If automation broke on some edge case, we would either change the automation to

handle it, or else fix the design of the service so it was no longer an edge case.

The new regime wasn’t painless. We had to learn new habits, and we had to find ways

of coping with the challenges of a highly automated infrastructure. As the members

of the team moved on to other organizations and got involved with communities

such as DevOpsDays, we learned and grew. Over time, we reached the point where

we were habitually working with automated infrastructures with hundreds of servers,

with much less effort and headache than we had been in our “Sorcerer’s Apprentice”

days.

Joining ThoughtWorks was an eye-opener for me. The development teams I worked

with were passionate about using XP engineering practices like test-driven develop‐

ment (TDD), continuous integration (CI) and continuous delivery (CD). Because I had already learned to manage infrastructure scripts and configuration files in source

control systems, it was natural to apply these rigorous development and testing

approaches to them.

Working with ThoughtWorks has also brought me into contact with many IT opera‐

tions teams, most of whom are using virtualization, cloud, and automation tools to

handle a variety of challenges. Working with them to share and learn new ideas and

techniques has been a fantastic experience.

Why I’m Writing This Book

I’ve run across many teams who are in the same place I was a few years ago: people

who are using cloud, virtualization, and automation tools but haven’t got it all run‐

ning as smoothly as they know they could.

Much of the challenge is time. Day-to-day life for system administrators is coping

with a never-ending flow of critical work. Fighting fires, fixing problems, and setting

xvi | Preface

up new business-critical projects doesn’t leave much time to work on the fundamen‐

tal improvements that will make the routine work easier.

My hope is that this book provides a practical vision for how to manage IT infra‐

structure, with techniques and patterns that teams can try and use. I will avoid the

details of configuring and using specific tools so that the content will be useful for

working with different tools, including ones that may not exist yet. Meanwhile, I will

use examples from existing tools to illustrate points I make.

The infrastructure-as-code approach is essential for managing cloud infrastructure of

any real scale or complexity, but it’s not exclusive to organizations using public cloud

providers. The techniques and practices in this book have proven effective in virtual‐

ized environments and even for bare-metal servers that aren’t virtualized.

Infrastructure as Code is one of the cornerstones of DevOps. It is the “A” in “CAMS” :

culture, automation, measurement, and sharing.

Who This Book Is For

This book is for people who work with IT infrastructure, particularly at the level of

managing servers and collections of servers. You may be a system administrator,

infrastructure engineer, team lead, architect, or a manager with technical interest.

You might also be a software developer who wants to build and use infrastructure.

I’m assuming you have some exposure to virtualization or IaaS (Infrastructure as a

Service) cloud, so you know how to create a server, and the concepts of configuring

operating systems. You’ve probably at least played with configuration automation

software like Ansible, Chef, or Puppet.

While this book may introduce some readers to infrastructure as code, I hope it will

also be interesting to people who work this way already and a vehicle through which

to share ideas and start conversations about how to do it even better.

What Tools Are Covered

This book doesn’t offer instructions in using specific scripting languages or tools.

There are code examples from specific tools, but these are intended to illustrate con‐

cepts and approaches, rather than to provide instruction. This book should be helpful

to you regardless of whether you use Chef on OpenStack, Puppet on AWS, Ansible

on bare metal, or a completely different stack.

The specific tools that I do mention are ones which I’m aware of, and which seem to

have a certain amount of traction in the field. But this is a constantly changing land‐

scape, and there are plenty of other relevant tools.

Preface | xvii

The tools I use in examples tend to be ones with which I am familiar enough to write

examples that demonstrate the point I’m trying to make. For example, I use Terra‐

form for examples of infrastructure definitions because it has a nice, clean syntax,

and I’ve used it on multiple projects. Many of my examples use Amazon’s AWS cloud

platform because it is likely to be the most familiar to readers.

How to Read This Book

Read Chapter 1, or at least skim it, to understand the terms this book uses and the

principles this book advocates. You can then use this to decide which parts of the

book to focus on.

If you’re new to this kind of automation, cloud, and infrastructure orchestration tool‐

ing, then you’ll want to focus on Part I, and then move on to Part II. Get comfortable

with those topics before proceeding to Part III.

If you’ve been using the types of automation tools described here, but don’t feel like

you’re using them the way they’re intended after reading Chapter 1, then you may

want to skip or skim the rest of Part I. Focus on Part II, which describes ways of using

dynamic and automated infrastructure that align with the principles outlined in

Chapter 1.

If you’re comfortable with the dynamic infrastructure and automation approaches

described in Chapter 1, then you may want to skim Parts I and II and focus on

Part III, which gets more deeply into the infrastructure management regime: archi‐

tectural approaches as well as team workflow.

Conventions Used in This Book

The following typographical conventions are used in this book:

Italic Indicates new terms, URLs, email addresses, filenames, and file extensions.

Constant width

Used for program listings, as well as within paragraphs to refer to program ele‐

ments such as variable or function names, databases, data types, environment

variables, statements, and keywords.

Constant width bold

Shows commands or other text that should be typed literally by the user.

Constant width italic

Shows text that should be replaced with user-supplied values or by values deter‐

mined by context.

xviii | Preface

This element signifies a tip or suggestion.

This element signifies a general note.

This element indicates a warning or caution.

Safari® Books Online

Safari Books Online is an on-demand digital library that deliv‐

ers expert content in both book and video form from the

world’s leading authors in technology and business.

Technology professionals, software developers, web designers, and business and crea‐

tive professionals use Safari Books Online as their primary resource for research,

problem solving, learning, and certification training.

Safari Books Online offers a range of plans and pricing for enterprise, government,

education, and individuals.

Members have access to thousands of books, training videos, and prepublication

manuscripts in one fully searchable database from publishers like O’Reilly Media,

Prentice Hall Professional, Addison-Wesley Professional, Microsoft Press, Sams,

Que, Peachpit Press, Focal Press, Cisco Press, John Wiley & Sons, Syngress, Morgan

Kaufmann, IBM Redbooks, Packt, Adobe Press, FT Press, Apress, Manning, New

Riders, McGraw-Hill, Jones & Bartlett, Course Technology, and hundreds more. For

more information about Safari Books Online, please visit us online.

Preface | xix

How to Contact Us

Please address comments and questions concerning this book to the publisher:

O’Reilly Media, Inc.

1005 Gravenstein Highway North

Sebastopol, CA 95472

800-998-9938 (in the United States or Canada)

707-829-0515 (international or local)

707-829-0104 (fax)

We have a web page for this book, where we list errata, examples, and any additional

information. You can access this page at http://bit.ly/infrastructureAsCode_1e.

To comment or ask technical questions about this book, send email to bookques‐

tions@oreilly.com.

For more information about our books, courses, conferences, and news, see our web‐

site at http://www.oreilly.com.

Find us on Facebook: http://facebook.com/oreilly

Follow us on Twitter: http://twitter.com/oreillymedia

Watch us on YouTube: http://www.youtube.com/oreillymedia

Acknowledgments

When I started working on this book, I assumed the result would be a product that

was entirely my own. But in the end, it’s just the opposite: this book is the product of

the ideas, thoughts, opinions, and experiences of far more people than I could have

imagined. I have probably mangled, oversimplified, and misrepresented this input.

But this book would not exist as it is without these contributions.

The people I worked with on the University of Tennessee’s computer science lab staff

taught me my Unix chops and inducted me into the culture. Chad Mynhier was par‐

ticularly responsible for hooking me into the Unix world. He explained why I could

no longer cd into my own home area after I had experimented with the chmod com‐

mand.

Working with a series of companies, including Syzygy, Vizyon, Cellectivity, and the

Map of Medicine, gave me the arena to develop my understanding and to learn how

to apply infrastructure automation to real-world business and user problems. I owe

much to the many good people of those organizations. I’ll specifically call out Jona‐

than Waywell and Ketan Patel for their unending support and encouragement,

xx | Preface

Andrew Fulcher for quickly learning what I had to teach and then teaching me even

more, and Nat Billington for his inspiration.

This book would truly never have happened without my current home, Thought‐

Works. I’ve learned much about the ideas in this book and how to think about and

explain them to other people, thanks to more than five years of exposure to a dizzy‐

ing number of organizations of various sizes, sectors, and technologies. The endless

curiosity of my colleagues, past and present, and their heartfelt drive to improve our

industry and the experiences of people in it, continually challenges me.

Generous support and encouragement from ThoughtWorks as an organization has

been vital for this book, especially as my energy flagged with the finish line coming

into view. Chris Murphy, Dave Elliman, Maneesh Subherwal, and Suzi Edwards-

Alexander are a few among many who have made this more than a personal project

for me.

An incomplete list of past and present ThoughtWorks colleagues who have gone out

of their way to contribute suggestions, feedback, and other support include: Abigail

Bangser, Ashok Subramanian, Barry O’Reilly, Ben Butler-Cole, Chris Bird

(DevOops!), Chris Ford, David Farley, Gurpreet Luthra, Inny So, Jason Yip, Jim

Gumbley, Kesha Stickland, Marco Abis, Nassos Antoniou, Paul Hammant, Peter

Gillard-Moss, Peter Staples, Philip Potter, Rafael Gomes, Sam Newman, Simon Brun‐

ning, Tom Duckering, Venu Murthy, and Vijay Raghavan Aravamudhan.

Martin Fowler has given me tremendous encouragement and practical support in

writing this book. He gave me far more time than I could have asked, thoroughly

reviewing the manuscript several times. Martin gave me detailed, useful feedback and

advice based on his considerable experience of organizing and conveying technical

concepts. He has been a true champion of this book.

My colleague Rong Tang created the images for this book. She was extremely patient

with my muddled explanations of what I wanted. Any failings of clarity or consis‐

tency is down to me, but the great look is a credit to her.

The folks behind the long-dormant Infrastructures.org exposed me to the ideas of

Infrastructure as Code before the term existed. 3

I owe a great debt to the people of the DevOpsDays community, who are collectively

responsible for bringing the ideas of DevOps and Infrastructure as Code to promi‐

nence. Regardless of who actually coined the term “Infrastructure as Code,” people

like Adam Jacob, Andrew Clay-Shafer, John Allspaw, John Willis, Luke Kaines, Mark

Burgess, and of course, Patrick Debois (“The Godfather of DevOps”) have given me

inspiration and many great ideas.

3 Sadly, as of early 2016, Infrastructures.org hasn’t been updated since 2007.

Preface | xxi

A number of other people have given me feedback and advice on earlier drafts of this

book, including Axel Fontaine, Jon Cowie, Jose Maria San Jose Juarez, Marcos Her‐

mida, and Matt Jones. I also want to thank Kent Spillner, although I don’t recall why.

Ovine and dairy. Putney Bridge.

Last, but the furthest from least, everlasting love to Ozlem and Erel, who endured my

obsession with this book.

xxii | Preface

PART I

Foundations

CHAPTER 1

Challenges and Principles

The new generation of infrastructure management technologies promises to trans‐

form the way we manage IT infrastructure. But many organizations today aren’t see‐

ing any dramatic differences, and some are finding that these tools only make life

messier. As we’ll see, infrastructure as code is an approach that provides principles,

practices, and patterns for using these technologies effectively.

Why Infrastructure as Code?

Virtualization, cloud, containers, server automation, and software-defined network‐

ing should simplify IT operations work. It should take less time and effort to provi‐

sion, configure, update, and maintain services. Problems should be quickly detected

and resolved, and systems should all be consistently configured and up to date. IT

staff should spend less time on routine drudgery, having time to rapidly make

changes and improvements to help their organizations meet the ever-changing needs

of the modern world.

But even with the latest and best new tools and platforms, IT operations teams still

find that they can’t keep up with their daily workload. They don’t have the time to fix

longstanding problems with their systems, much less revamp them to make the best

use of new tools. In fact, cloud and automation often makes things worse. The ease of

provisioning new infrastructure leads to an ever-growing portfolio of systems, and it

takes an ever-increasing amount of time just to keep everything from collapsing.

Adopting cloud and automation tools immediately lowers barriers for making

changes to infrastructure. But managing changes in a way that improves consistency

and reliability doesn’t come out of the box with the software. It takes people to think

through how they will use the tools and put in place the systems, processes, and hab‐

its to use them effectively.

3

Some IT organizations respond to this challenge by applying the same types of pro‐

cesses, structures, and governance that they used to manage infrastructure and soft‐

ware before cloud and automation became commonplace. But the principles that

applied in a time when it took days or weeks to provision a new server struggle to

cope now that it takes minutes or seconds.

Legacy change management processes are commonly ignored, bypassed, or overruled

by people who need to get things done.1 Organizations that are more successful in

enforcing these processes are increasingly seeing themselves outrun by more techni‐

cally nimble competitors.

Legacy change management approaches struggle to cope with the pace of change

offered by cloud and automation. But there is still a need to cope with the ever-

growing, continuously changing landscape of systems created by cloud and automa‐

tion tools. This is where infrastructure as code2 comes in.

The Iron Age and the Cloud Age

In the “iron age” of IT, systems were directly bound to physical hardware. Provision‐

ing and maintaining infrastructure was manual work, forcing humans to spend their

time pointing, clicking, and typing to keep the gears turning. Because changes

involved so much work, change management processes emphasized careful up-front

consideration, design, and review work. This made sense because getting it wrong

was expensive.

In the “cloud age” of IT, systems have been decoupled from the physical hardware.

Routine provisioning and maintenance can be delegated to software systems, freeing

the humans from drudgery. Changes can be made in minutes, if not seconds. Change

management can exploit this speed, providing better reliability along with faster time

to market.

1 “Shadow IT” is when people bypass formal IT governance to bring in their own devices, buy and install unap‐

proved software, or adopt cloud-hosted services. This is typically a sign that internal IT is not able to keep up

with the needs of the organization it serves.

2 The phrase “infrastructure as code” doesn’t have a clear origin or author. While writing this book, I followed

a chain of people who have influenced thinking around the concept, each of whom said it wasn’t them, but

offered suggestions. This chain had a number of loops. The earliest reference I could find was from the Veloc‐

ity conference in 2009, in a talk by Andrew Clay-Shafer and Adam Jacob. John Willis may be the first to

document the phrase, in an article about the conference. Luke Kaines has admitted that he may have been involved, the closest anyone has come to accepting credit.

4 | Chapter 1: Challenges and Principles

What Is Infrastructure as Code?

Infrastructure as code is an approach to infrastructure automation based on practices

from software development. It emphasizes consistent, repeatable routines for provi‐

sioning and changing systems and their configuration. Changes are made to defini‐

tions and then rolled out to systems through unattended processes that include

thorough validation.

The premise is that modern tooling can treat infrastructure as if it were software and

data. This allows people to apply software development tools such as version control

systems (VCS), automated testing libraries, and deployment orchestration to manage

infrastructure. It also opens the door to exploit development practices such as test-

driven development (TDD), continuous integration (CI), and continuous delivery

(CD).

Infrastructure as code has been proven in the most demanding environments. For

companies like Amazon, Netflix, Google, Facebook, and Etsy, IT systems are not just

business critical; they are the business. There is no tolerance for downtime. Amazon’s

systems handle hundreds of millions of dollars in transactions every day. So it’s no

surprise that organizations like these are pioneering new practices for large scale,

highly reliable IT infrastructure.

This book aims to explain how to take advantage of the cloud-era, infrastructure-as-

code approaches to IT infrastructure management. This chapter explores the pitfalls

that organizations often fall into when adopting the new generation of infrastructure

technology. It describes the core principles and key practices of infrastructure as code

that are used to avoid these pitfalls.

Goals of Infrastructure as Code

The types of outcomes that many teams and organizations look to achieve through

infrastructure as code include:

• IT infrastructure supports and enables change, rather than being an obstacle or a

constraint.

• Changes to the system are routine, without drama or stress for users or IT staff.

• IT staff spends their time on valuable things that engage their abilities, not on

routine, repetitive tasks.

• Users are able to define, provision, and manage the resources they need, without

needing IT staff to do it for them.

• Teams are able to easily and quickly recover from failures, rather than assuming

failure can be completely prevented.

What Is Infrastructure as Code? | 5

• Improvements are made continuously, rather than done through expensive and

risky “big bang” projects.

• Solutions to problems are proven through implementing, testing, and measuring

them, rather than by discussing them in meetings and documents.

Infrastructure as Code Is Not Just for the Cloud

Infrastructure as code has come into its own with cloud, because it’s difficult to man‐

age servers in the cloud well without it. But the principles and practices of infrastruc‐

ture as code can be applied to infrastructure whether it runs on cloud, virtualized

systems, or even directly on physical hardware.

I use the phrase “dynamic infrastructure” to refer to the ability to create and destroy

servers programmatically; Chapter 2 is dedicated to this topic. Cloud does this natu‐

rally, and virtualization platforms can be configured to do the same. But even hard‐

ware can be automatically provisioned so that it can be used in a fully dynamic

fashion. This is sometimes referred to as “bare-metal cloud.”

It is possible to use many of the concepts of infrastructure as code with static infra‐

structure. Servers that have been manually provisioned can be configured and upda‐

ted using server configuration tools. However, the ability to effortlessly destroy and

rebuild servers is essential for many of the more advanced practices described in this

book.

Challenges with Dynamic Infrastructure

This section looks at some of the problems teams often see when they adopt dynamic

infrastructure and automated configuration tools. These are the problems that infra‐

structure as code addresses, so understanding them lays the groundwork for the prin‐

ciples and concepts that follow.

Server Sprawl

Cloud and virtualization can make it trivial to provision new servers from a pool of

resources. This can lead to the number of servers growing faster than the ability of

the team to manage them as well as they would like.

When this happens, teams struggle to keep servers patched and up to date, leaving

systems vulnerable to known exploits. When problems are discovered, fixes may not

be rolled out to all of the systems that could be affected by them. Differences in ver‐

sions and configurations across servers mean that software and scripts that work on

some machines don’t work on others.

6 | Chapter 1: Challenges and Principles

This leads to inconsistency across the servers, called configuration drift.

Configuration Drift

Even when servers are initially created and configured consistently, differences can

creep in over time:

• Someone makes a fix to one of the Oracle servers to fix a specific user’s problem,

and now it’s different from the other Oracle servers.

• A new version of JIRA needs a newer version of Java, but there’s not enough time

to test all of the other Java-based applications so that everything can be upgra‐

ded.

• Three different people install IIS on three different web servers over the course of

a few months, and each person configures it differently.

• One JBoss server gets more traffic than the others and starts struggling, so some‐

one tunes it, and now its configuration is different from the other JBoss servers.

Being different isn’t bad. The heavily loaded JBoss server probably should be tuned

differently from ones with lower levels of traffic. But variations should be captured

and managed in a way that makes it easy to reproduce and to rebuild servers and

services.

Unmanaged variation between servers leads to snowflake servers and automation

fear.

Snowflake Servers

A snowflake server is different from any other server on your network. It’s special in

ways that can’t be replicated.

Years ago I ran servers for a company that built web applications for clients, most of

which were monstrous collections of Perl CGI. (Don’t judge us, this was the dot-com

era, and everyone was doing it.) We started out using Perl 5.6, but at some point the

best libraries moved to Perl 5.8 and couldn’t be used on 5.6. Eventually almost all of

our newer applications were built with 5.8 as well, but there was one particularly

important client application that simply wouldn’t run on 5.8.

It was actually worse than this. The application worked fine when we upgraded our

shared staging server to 5.8, but crashed when we upgraded the staging environment.

Don’t ask why we upgraded production to 5.8 without discovering the problem with

staging, but that’s how we ended up. We had one special server that could run the

application with Perl 5.8, but no other server would.

We ran this way for a shamefully long time, keeping Perl 5.6 on the staging server

and crossing our fingers whenever we deployed to production. We were terrified to

Challenges with Dynamic Infrastructure | 7

touch anything on the production server, afraid to disturb whatever magic made it

the only server that could run the client’s application.

This situation led us to discover Infrastructures.Org, a site that introduced me to

ideas that were a precursor to infrastructure as code. We made sure that all of our

servers were built in a repeatable way, installing the operating system with the Fully

Automated Installation (FAI) tool, configuring the server with CFEngine, and check‐

ing everything into our CVS version control system.

As embarrassing as this story is, most IT operations teams have similar stories of spe‐

cial servers that couldn’t be touched, much less reproduced. It’s not always a mysteri‐

ous fragility; sometimes there is an important software package that runs on an

entirely different OS than everything else in the infrastructure. I recall an accounting

package that needed to run on AIX, and a PBX system running on a Windows NT

3.51 server specially installed by a long-forgotten contractor.

Once again, being different isn’t bad. The problem is when the team that owns the

server doesn’t understand how and why it’s different, and wouldn’t be able to rebuild

it. An operations team should be able to confidently and quickly rebuild any server in

their infrastructure. If any server doesn’t meet this requirement, constructing a new,

reproducible process that can build a server to take its place should be a leading pri‐

ority for the team.

Fragile Infrastructure

A fragile infrastructure is easily disrupted and not easily fixed. This is the snowflake

server problem expanded to an entire portfolio of systems.

The solution is to migrate everything in the infrastructure to a reliable, reproducible

infrastructure, one step at a time. The Visible Ops Handbook3 outlines an approach

for bringing stability and predictability to a difficult infrastructure.

Don’t touch that server. Don’t point at it. Don’t even look at it.

There is the possibly apocryphal story of the data center with a server that nobody

had the login details for, and nobody was certain what the server did. Someone took

the bull by the horns and unplugged the server from the network. The network failed

completely, the cable was plugged back in, and nobody ever touched the server again.

3 First published in 2005, the Visible Ops Handbook by Gene Kim, George Spafford, and Kevin Behr (IT Pro‐

cess Institute, Inc.) was written before DevOps, virtualization, and automated configuration became main‐

stream, but it’s easy to see how infrastructure as code can be used within the framework described by the

authors.

8 | Chapter 1: Challenges and Principles

Automation Fear

At an Open Space session on configuration automation at a DevOpsDays conference, I asked the group how many of them were using automation tools like Puppet or

Chef. The majority of hands went up. I asked how many were running these tools

unattended, on an automatic schedule. Most of the hands went down.

Many people have the same problem I had in my early days of using automation

tools. I used automation selectively—for example, to help build new servers, or to

make a specific configuration change. I tweaked the configuration each time I ran it,

to suit the particular task I was doing.

I was afraid to turn my back on my automation tools, because I lacked confidence in

what they would do.

I lacked confidence in my automation because my servers were not consistent.

My servers were not consistent because I wasn’t running automation frequently and

consistently.

This is the automation fear spiral, as shown in Figure 1-1, and infrastructure teams

need to break this spiral to use automation successfully. The most effective way to

break the spiral is to face your fears. Pick a set of servers, tweak the configuration def‐

initions so that you know they work, and schedule them to run unattended, at least

once an hour. Then pick another set of servers and repeat the process, and so on until

all of your servers are continuously updated.

Figure 1-1. The automation fear spiral

Good monitoring and effective automated testing regimes as described in Part III of

this book will help build confidence that configuration can be reliably applied and

problems caught quickly.

Challenges with Dynamic Infrastructure | 9

Erosion

In an ideal world, you would never need to touch an automated infrastructure once

you’ve built it, other than to support something new or fix things that break. Sadly,

the forces of entropy mean that even without a new requirement, infrastructure

decays over time. The folks at Heroku call this erosion. Erosion is the idea that prob‐

lems will creep into a running system over time.

The Heroku folks give these examples of forces that can erode a system over time:

• Operating system upgrades, kernel patches, and infrastructure software (e.g.,

Apache, MySQL, SSH, OpenSSL) updates to fix security vulnerabilities

• The server’s disk filling up with logfiles

• One or more of the application’s processes crashing or getting stuck, requiring

someone to log in and restart them

• Failure of the underlying hardware causing one or more entire servers to go

down, taking the application with it

Principles of Infrastructure as Code

This section describes principles that can help teams overcome the challenges

described earlier in this chapter.

Systems Can Be Easily Reproduced

It should be possible to effortlessly and reliably rebuild any element of an infrastruc‐

ture. Effortlessly means that there is no need to make any significant decisions about

how to rebuild the thing. Decisions about which software and versions to install on a

server, how to choose a hostname, and so on should be captured in the scripts and

tooling that provision it.

The ability to effortlessly build and rebuild any part of the infrastructure is powerful.

It removes much of the risk, and fear, when making changes. Failures can be handled

quickly and with confidence. New services and environments can be provisioned

with little effort.

Approaches for reproducibly provisioning servers and other infrastructure elements

are discussed in Part II of this book.

10 | Chapter 1: Challenges and Principles

Systems Are Disposable

One of the benefits of dynamic infrastructure is that resources can be easily created,

destroyed, replaced, resized, and moved. In order to take advantage of this, systems

should be designed to assume that the infrastructure will always be changing. Soft‐

ware should continue running even when servers disappear, appear, and when they

are resized.

The ability to handle changes gracefully makes it easier to make improvements and

fixes to running infrastructure. It also makes services more tolerant to failure. This

becomes especially important when sharing large-scale cloud infrastructure, where

the reliability of the underlying hardware can’t be guaranteed.

Cattle, Not Pets

A popular expression is to “treat your servers like cattle, not pets.” 4

I miss the days of having themes for server names and carefully

selecting names for each new server I provisioned. But I don’t miss

having to manually tweak and massage every server in our estate.

A fundamental difference between the iron age and cloud age is the move from unre‐

liable software, which depends on the hardware to be very reliable, to software that

runs reliably on unreliable hardware. 5 See Chapter 14 for more on how embracing

disposable infrastructure can be used to improve service continuity.

The Case of the Disappearing File Server

The idea that servers aren’t permanent things can take time to sink in. On one team,

we set up an automated infrastructure using VMware and Chef, and got into the

habit of casually deleting and replacing VMs. A developer, needing a web server to

host files for teammates to download, installed a web server onto a server in the

development environment and put the files there. He was surprised when his web

server and its files disappeared a few days later.

After a bit of confusion, the developer added the configuration for his file repository

to the Chef configuration, taking advantage of tooling we had to persist data to a

4 CloudConnect CTO Randy Bias attributed this expression to former Microsoft employee Bill Baker, from his

presentation “Architectures for Open and Scalable Clouds”. I first heard it in Gavin McCance’s presentation

“CERN Data Centre Evolution” . Both of these presentations are excellent.

5 Sam Johnson described this view of the reliability of hardware and software in his article, “Simplifying Cloud:

Reliability”.

Principles of Infrastructure as Code | 11

SAN. The team ended up with a highly reliable, automatically configured file sharing

service.

To borrow a cliche, the disappearing server is a feature, not a bug. The old world

where people installed ad hoc tools and tweaks in random places leads straight to the

old world of snowflakes and untouchable fragile infrastructure. Although it was

uncomfortable at first, the developer learned how to use infrastructure as code to

build services—a file repository in this case—that are reproducible and reliable.

Systems Are Consistent

Given two infrastructure elements providing a similar service—for example, two

application servers in a cluster—the servers should be nearly identical. Their system

software and configuration should be the same, except for those bits of configuration

that differentiate them, like their IP addresses.

Letting inconsistencies slip into an infrastructure keeps you from being able to trust

your automation. If one file server has an 80 GB partition, while another has 100 GB,

and a third has 200 GB, then you can’t rely on an action to work the same on all of

them. This encourages doing special things for servers that don’t quite match, which

leads to unreliable automation.

Teams that implement the reproducibility principle can easily build multiple identi‐

cal infrastructure elements. If one of these elements needs to be changed (e.g., one of

the file servers needs a larger disk partition), there are two ways that keep consis‐

tency. One is to change the definition so that all file servers are built with a large

enough partition to meet the need. The other is to add a new class, or role, so that

there is now an “xl-file-server” with a larger disk than the standard file server. Either

type of server can be built repeatedly and consistently.

Being able to build and rebuild consistent infrastructure helps with configuration

drift. But clearly, changes that happen after servers are created need to be dealt with.

Ensuring consistency for existing infrastructure is the topic of Chapter 8.

Processes Are Repeatable

Building on the reproducibility principle, any action you carry out on your infra‐

structure should be repeatable. This is an obvious benefit of using scripts and config‐

uration management tools rather than making changes manually, but it can be hard

to stick to doing things this way, especially for experienced system administrators.

For example, if I’m faced with what seems like a one-off task like partitioning a hard

drive, I find it easier to just log in and do it, rather than to write and test a script. I

can look at the system disk, consider what the server I’m working on needs, and use

12 | Chapter 1: Challenges and Principles

my experience and knowledge to decide how big to make each partition, what filesys‐

tem to use, and so on.

The problem is that later on, someone else on my team might partition a disk on

another machine and make slightly different decisions. Maybe I made an 80 GB /var

partition using ext3 on one file server, but Priya made /var 100 GB on another file

server in the cluster, and used xfs. We’re failing the consistency principle, which will

eventually undermine the ability to automate things.

Effective infrastructure teams have a strong scripting culture. If a task can be scripted,

script it. If a task is hard to script, drill down and see if there’s a technique or tool that

can help, or whether the problem the task is addressing can be handled in a different

way.

Design Is Always Changing

With iron-age IT, making a change to an existing system is difficult and expensive. So

limiting the need to make changes to the system once it’s built makes sense. This

leads to the need for comprehensive initial designs that take various possible require‐

ments and situations into account.

Because it’s impossible to accurately predict how a system will be used in practice,

and how its requirements will change over time, this approach naturally creates

overly complex systems. Ironically, this complexity makes it more difficult to change

and improve the system, which makes it less likely to cope well in the long run.

With cloud-age dynamic infrastructure, making a change to an existing system can

be easy and cheap. However, this assumes everything is designed to facilitate change.

Software and infrastructure must be designed as simply as possible to meet current

requirements. Change management must be able to deliver changes safely and

quickly.

The most important measure to ensure that a system can be changed safely and

quickly is to make changes frequently. This forces everyone involved to learn good

habits for managing changes, to develop efficient, streamlined processes, and to

implement tooling that supports doing so.

Practices

The previous section outlined high-level principles. This section describes some of

the general practices of infrastructure as code.

Use Definition Files

The cornerstone practice of infrastructure as code is the use of definition files. A defi‐

nition specifies infrastructure elements and how they should be configured. The defi‐

Practices | 13

nition file is used as input for a tool that carries out the work to provision and/or

configure instances of those elements. Example 1-1 is an example of a definition file

for a database server node.

The infrastructure element could be a server; a part of a server, such as a user

account; network configuration, such as a load balancer rule; or many other things.

Different tools have different terms for this: for example, playbooks (Ansible), recipes

(Chef), or manifests (Puppet). The term “configuration definition file” is used in this

book as a generic term for these.

Example 1-1. Example of a definition file using a DSL

server: dbnode

base_image: centos72

chef_role: dbnode

network_segment: prod_db

allowed_inbound:

from_segment: prod_app

port: 1521

allowed_inbound:

from_segment: admin

port: 22

Definition files are managed as text files. They may use a standard format such as

JSON, YAML, or XML. Or they may define their own domain-specific language

(DSL). 6

Keeping specifications and configurations in text files makes them more accessible

than storing them in a tool’s internal configuration database. The files can also be

treated like software source code, bringing a wide ecosystem of development tools to

bear.

Self-Documented Systems and Processes

IT teams commonly struggle to keep their documentation relevant, useful, and accu‐

rate. Someone might write up a comprehensive document for a new process, but it’s

rare for such documents to be kept up to date as changes and improvements are

made to the way things are done. And documents still often leave gaps. Different peo‐

ple find their own shortcuts and improvements. Some people write their own per‐

sonal scripts to make parts of the process easier.

6 As defined by Martin Fowler and Rebecca Parsons in Domain-Specific Languages (Addison-Wesley Professio‐

nal), “DSLs are small languages, focused on a particular aspect of a software system. You can’t build a whole

program with a DSL, but you often use multiple DSLs in a system mainly written in a general-purpose lan‐

guage.” Their book is a good reference on domain-specific languages, although it’s written more for people

thinking about implementing one than for people using them.

14 | Chapter 1: Challenges and Principles

So although documentation is often seen as a way to enforce consistency, standards,

and even legal compliance, in practice it’s a fictionalized version of what really

happens.

With infrastructure as code, the steps to carry out a process are captured in the

scripts, definition files, and tools that actually implement the process. Only a mini‐

mum of added documentation is needed to get people started. The documentation

that does exist should be kept close to the code it documents, to make sure it’s close

to hand and mind when people make changes.

Automatically Generating Documentation

On one project, my colleague Tom Duckering found that the team responsible for

deploying software to production insisted on doing it manually. Tom had imple‐

mented an automated deployment using Apache Ant, but the production team

wanted written documentation for a manual process.

So Tom wrote a custom Ant task that printed out each step of the automated deploy‐

ment process. This way, a document was generated with the exact steps, down to the

command lines to type. His team’s continuous integration server generated this docu‐

ment for every build, so they could deliver a document that was accurate and up to

date. Any changes to the deployment script were automatically included in the docu‐

ment without any extra effort.

Version All the Things

The version control system (VCS) is a core part of infrastructure that is managed as

code. The VCS is the source of truth for the desired state of infrastructure. Changes

to infrastructure are driven by changes committed to the VCS.

Reasons why VCS is essential for infrastructure management include:

Traceability

VCS provides a history of changes that have been made, who made them, and

ideally, context about why. This is invaluable when debugging problems.

Rollback

When a change breaks something—and especially when multiple changes break

something—it’s useful to be able to restore things to exactly how they were

before.

Correlation

When scripts, configuration, artifacts, and everything across the board are in ver‐

sion control and correlated by tags or version numbers, it can be useful for trac‐

ing and fixing more complex problems.

Practices | 15

Visibility

Everyone can see when changes are committed to a version control system,

which helps situational awareness for the team. Someone may notice that a

change has missed something important. If an incident happens, people are

aware of recent commits that may have triggered it.

Actionability

VCSs can automatically trigger actions when a change is committed. This is a key

to enabling continuous integration and continuous delivery pipelines.

Chapter 4 explains how VCS works with configuration management tools, and Chap‐

ter 10 discusses approaches to managing your infrastructure code and definitions.

Continuously Test Systems and Processes

Effective automated testing is one of the most important practices that infrastructure

teams can borrow from software development. Automated testing is a core practice

of high-performing development teams. They implement tests along with their code

and run them continuously, typically dozens of times a day as they make incremental

changes to their codebase.

It’s difficult to write automated tests for an existing, legacy system. A system’s design

needs to be decoupled and structured in a way that facilitates independently testing

components. Writing tests while implementing the system tends to drive clean, sim‐

ple design, with loosely coupled components.

Running tests continuously during development gives fast feedback on changes. Fast

feedback gives people the confidence to make changes quickly and more often. This

is especially powerful with automated infrastructure, because a small change can do a

lot of damage very quickly (aka DevOops, as described in “DevOops” on page 228).

Good testing practices are the key to eliminating automation fear.

Chapter 11 explores practices and techniques for implementing testing as part of the

system, and particularly how this can be done effectively for infrastructure.

Small Changes Rather Than Batches

When I first got involved in developing IT systems, my instinct was to implement a

complete piece of work before putting it live. It made sense to wait until it was “done”

before spending the time and effort on testing it, cleaning it up, and generally making

it “production ready.” The work involved in finishing it up tended to take a lot of

time and effort, so why do the work before it’s really needed?

However, over time I’ve learned to the value of small changes. Even for a big piece of

work, it’s useful to find incremental changes that can be made, tested, and pushed

16 | Chapter 1: Challenges and Principles

into use, one by one. There are a lot of good reasons to prefer small, incremental

changes over big batches:

• It’s easier, and less work, to test a small change and make sure it’s solid.

• If something goes wrong with a small change, it’s easier to find the cause than if

something goes wrong with a big batch of changes.

• It’s faster to fix or reverse a small change.

• One small problem can delay everything in a large batch of changes from going

ahead, even when most of the other changes in the batch are fine.

• Getting fixes and improvements out the door is motivating. Having large batches

of unfinished work piling up, going stale, is demotivating.

As with many good working practices, once you get the habit, it’s hard to not do the

right thing. You get much better at releasing changes. These days, I get uncomforta‐

ble if I’ve spent more than an hour working on something without pushing it out.

Keep Services Available Continuously

It’s important that a service is always able to handle requests, in spite of what might

be happening to the infrastructure. If a server disappears, other servers should

already be running, and new ones quickly started, so that service is not interrupted.

This is nothing new in IT, although virtualization and automation can make it easier.

Data management, broadly defined, can be trickier. Service data can be kept intact in

spite of what happens to the servers hosting it through replication and other

approaches that have been around for decades. When designing a cloud-based sys‐

tem, it’s important to widen the definition of data that needs to be persisted, usually

including things like application configuration, logfiles, and more.

The chapter on continuity (Chapter 14) goes into techniques for keeping service and

data continuously available.

Antifragility: Beyond “Robust”

Robust infrastructure is a typical goal in IT, meaning systems will hold up well to

shocks such as failures, load spikes, and attacks. However, infrastructure as code

lends itself to taking infrastructure beyond robust, becoming antifragile.

Nicholas Taleb coined the term “antifragile” with his book of the same title, to describe systems that actually grow stronger when stressed. Taleb’s book is not IT-specific—his main focus is on financial systems—but his ideas are relevant to IT

architecture.

Antifragility: Beyond “Robust” | 17

The effect of physical stress on the human body is an example of antifragility in

action. Exercise puts stress on muscles and bones, essentially damaging them, causing

them to become stronger. Protecting the body by avoiding physical stress and exer‐

cise actually weakens it, making it more likely to fail in the face of extreme stress.

Similarly, protecting an IT system by minimizing the number of changes made to it

will not make it more robust. Teams that are constantly changing and improving

their systems are much more ready to handle disasters and incidents.

The key to an antifragile IT infrastructure is making sure that the default response to

incidents is improvement. When something goes wrong, the priority is not simply to

fix it, but to improve the ability of the system to cope with similar incidents in the

future.

The Secret Ingredient of Antifragile IT Systems

People are the part of the system that can cope with unexpected situations and mod‐

ify the other elements of the system to handle similar situations better the next time

around. This means the people running the system need to understand it quite well

and be able to continuously modify it.

This doesn’t fit the idea of automation as a way to run things without humans. Some‐

day it might be possible to buy a standard corporate IT infrastructure off the shelf

and run it as a black box, without needing to look inside, but this isn’t possible today.

IT technology and approaches are constantly evolving, and even in nontechnology

businesses, the most successful companies are the ones continuously changing and

improving their IT.

The key to continuously improving an IT system is the people who build and run it.

So the secret to designing a system that can adapt as needs change is to design it

around the people. 7

Conclusion

The hallmark of an infrastructure team’s effectiveness is how well it handles changing

requirements. Highly effective teams can handle changes and new requirements

easily, breaking down requirements into small pieces and piping them through in a

rapid stream of low-risk, low-impact changes.

7 Brian L. Troutwin gave a talk at DevOpsDays Ghent in 2014 titled “Automation, with Humans in Mind” . He gave an example from NASA of how humans were able to modify the systems on the Apollo 13 spaceflight to

cope with disaster. He also gave many details of how the humans at the Chernobyl nuclear power plant were

prevented from interfering with the automated systems there, which kept them from taking steps to stop or

contain disaster.

18 | Chapter 1: Challenges and Principles

Some signals that a team is doing well:

• Every element of the infrastructure can be rebuilt quickly, with little effort.

• All systems are kept patched, consistent, and up to date.

• Standard service requests, including provisioning standard servers and environ‐

ments, can be fulfilled within minutes, with no involvement from infrastructure

team members. SLAs are unnecessary.

• Maintenance windows are rarely, if ever, needed. Changes take place during

working hours, including software deployments and other high-risk activities.

• The team tracks mean time to recover (MTTR) and focuses on ways to improve

this. Although mean time between failure (MTBF) may also be tracked, the team

does not rely on avoiding failures. 8

• Team members feel their work is adding measurable value to the organization.

What’s Next?

The next four chapters focus on the tooling involved in infrastructure as code. Read‐

ers who are already familiar with these tools may choose to skim or skip these chap‐

ters and go straight to Part II, which describes infrastructure-as-code patterns for

using the tools.

I have grouped tools into four chapters. As with any model for categorizing things,

this division of tools is not absolute. Many tools will cross these boundaries or have a

fuzzy relationship to these definitions. This grouping is a convenience, to make it eas‐

ier to discuss the many tools involved in running a dynamic infrastructure:

Dynamic infrastructure platforms

Used to provide and manage basic infrastructure resources, particularly compute

(servers), storage, and networking. These include public and private cloud infra‐

structure services, virtualization, and automated configure of physical devices.

This is the topic of Chapter 2.

Infrastructure definition tools

Used to manage the allocation and configuration servers, storage, and network‐

ing resources. These tools provision and configure infrastructure at a high level.

This is the subject of Chapter 3.

8 See John Allspaw’s seminal blog post, “MTTR is more important than MTBF (for most types of F)” .

What’s Next? | 19

Server configuration tools

These tools deal with the details of servers themselves. This includes software

packages, user accounts, and various types of configuration. This group, which is

typified by specific tools including CFEngine, Puppet, Chef, and Ansible, are

what many people think of first when discussing infrastructure automation and

infrastructure as code. These tools are discussed in Chapter 4.

Infrastructure services

Tools and services that help to manage infrastructure and application services.

Topics such as monitoring, distributed process management, and software

deployment are the subject of Chapter 5.

20 | Chapter 1: Challenges and Principles

CHAPTER 2

Dynamic Infrastructure Platforms

This chapter describes different types of dynamic infrastructure platforms, which

provide the foundation for provisioning and managing core infrastructure resources.

The goal is to understand the typical capabilities and service models available, and

the requirements a platform must provide to effectively support infrastructure as

code.

What Is a Dynamic Infrastructure Platform?

A dynamic infrastructure platform is a system that provides computing resources,

particularly servers, storage, and networking, in a way that they can be programmati‐

cally allocated and managed.

Table 2-1 lists several types of dynamic infrastructure platforms with examples. The

best-known examples are public IaaS (Infrastructure as a Service) cloud services like

AWS, and private IaaS products like OpenStack. But infrastructure can also be man‐

aged dynamically using virtualization systems such as VMware vSphere, which don’t

meet the definition of cloud. (I’ll define cloud a bit later in this chapter.) And some

organizations automate the provisioning and management of bare-metal physical

hardware, using tools such as Cobbler or Foreman.

Table 2-1. Examples of dynamic infrastructure platforms

Type of Platform

Providers or Products

Public IaaS cloud

AWS, Azure, Digital Ocean, GCE, and Rackspace Cloud

Community IaaS cloud Cloud services shared between governmental departments

Private IaaS cloud

CloudStack, OpenStack, and VMware vCloud

Bare-metal cloud

Cobbler, FAI, and Foreman

21

It doesn’t matter whether a dynamic infrastructure platform is cloud, virtualization,

or bare metal. What is important is that scripts and tools can use it to automatically

create and destroy elements of infrastructure, report on their status, and manage

metadata.

Different types of platforms, and considerations for choosing between them, is dis‐

cussed later in this chapter.

Implementing Your Dynamic Infrastructure Platform

While public infrastructure clouds like AWS are the best-known

examples of dynamic infrastructure platforms, many organizations

implement their own, private infrastructure clouds. This book

focuses on building infrastructure on top of an existing platform,

and so sidesteps the question of how to build your own infrastruc‐

ture platform. That said, this chapter should help to understand the

requirements needed from a platform in order to support infra‐

structure as code.

Requirements for a Dynamic Infrastructure Platform

Infrastructure as code is about treating infrastructure as a software system, which

means the dynamic infrastructure platform needs to have certain characteristics. The

platform needs to be:

• Programmable

• On-demand

• Self-service

The next few sections will discuss each of these characteristics in detail.

Characteristics of a Cloud, According to NIST

The US National Institute of Standards and Technology (NIST) has published an

excellent definition of cloud computing. It lists five essential characteristics of cloud:

• On-demand self-service (provisioning)

• Broad network access (available over the network using “standard mechanisms”)

• Resource pooling (multitenancy)

• Rapid elasticity (elements can be added and removed quickly, even automati‐

cally)

• Measured service (you can meter your usage of resources)

22 | Chapter 2: Dynamic Infrastructure Platforms

The definition of a dynamic infrastructure platform is broader than cloud. Resource

pooling isn’t a requirement for infrastructure as code, which in turn means that

metering may not be necessary.

Programmable

The dynamic infrastructure platform must be programmable. A user interface is

handy, and most virtualization products and cloud providers have one. But scripts,

software, and tools must be able to interact with the platform, and this requires a pro‐

gramming API.

Even when using off-the-shelf tools, most teams end up writing at least some custom

scripts and tools. So the infrastructure platform’s API must have good support for

scripting languages that the team is comfortable using.

Most infrastructure platforms expose their management functionality through a net‐

work API, with REST-based APIs being the most popular due to their ease of use and

flexibility (Figure 2-1).

Figure 2-1. Infrastructure platform API clients

Programming and scripting against a REST API is fairly straightforward, but it can be

helpful to use a language-specific library that wraps the details of the API, providing

classes and structures to represent the infrastructure elements and operations on

them. The developers of dynamic infrastructure platforms usually offer an SDK in at

least a few languages, and there are a number of open source projects that provide

comprehensive APIs for multiple platforms, such as the Ruby Fog and Python Boto

libraries.

Requirements for a Dynamic Infrastructure Platform | 23

Example of a script using an SDK for a dynamic infrastructure platform

Example 2-1 uses Amazon’s Ruby SDK (version 2) to create an EC2 instance.

The script first uses the API to create a client object. This object opens an authentica‐

ted session with AWS. It handles authentication transparently, reading AWS API

keys from environment variables that will have been set before the script is run.

The run_instances API call specifies the AMI to use to create the new instance, and

the size of the instance to create, as well as how many instances to start.

The script then calls describe_instances, which lists all of the EC2 instances this

account has in the region. It prints the ID for each instance along with its state.

Example 2-1. Simple Ruby script that uses the AWS SDK

require 'aws-sdk'

@client = Aws::EC2::Client.new(:region => 'eu-west-1')

@client.run_instances({

image_id: 'ami-903686e7',

instance_type: "t1.micro",

min_count: 1,

max_count: 1

})

@client.describe_instances()[:reservations].each { |reservation|

reservation[:instances].each { |instance|

puts "Instance #{instance.instance_id} is #{instance.state.name}"

}

}

On-Demand

It is essential for infrastructure as code that the dynamic infrastructure platform

allows resources to be created and destroyed immediately.

This should be obvious, but it’s not always the case. Some managed hosting provid‐

ers, and internal IT departments, offer services they describe as cloud, but which

require raising requests for staff to actually carry out the activities. For an organiza‐

tion to use infrastructure as code, its hosting platform must be able to fulfill provi‐

sioning requests within minutes, if not seconds.

Billing and budgeting also need to be structured to support on-demand, incremental

charging. Traditional budgeting is based on long-term commitments of months or

years. Dynamic infrastructure should not require long-term commitments, with

hourly billing periods at most.

24 | Chapter 2: Dynamic Infrastructure Platforms

An organization may make a long-term commitment to buy or lease a fixed pool of

hardware. But provisioning virtual instances from that pool should not involve addi‐

tional costs, especially not long-term ones.

Self-Service

Self-service adds a bit more onto the on-demand requirement for the infrastructure

platform. Not only should infrastructure users be able to have resources quickly, they

must have the ability to tailor and customize those resources to their requirements.

This is in contrast with the more traditional approach, where a central team (or

group of teams) designs solutions for teams that need infrastructure. Even a common

request such as a new web server may involve a detailed request form, design and

specification documents, and implementation plan.

This is like buying a box of LEGO bricks, but having the shop staff decide how to

assemble them for you. It prevents the requesting team from taking ownership of the

infrastructure they use and learning how to to shape it to their own needs and

improve it over time.

With the advent of cloud, some central infrastructure teams are offering self-service

resources, but from a very narrow menu. For example, teams may be able to provi‐

sion one of three types of servers: a web server, application server, or database server,

each with a specific build of software and no ability to customize it.

This is like only being able to buy a preassembled LEGO toy that has been glued

together. This doesn’t help a team that needs to customize a solution, such as opti‐

mizing the web server software for their application. Teams who need a new type of

solution, such as running software on a different application server, may be com‐

pletely out of luck.

Infrastructure as code assumes, and requires, that teams use scripts and tools to auto‐

matically specify and provision resources, and make changes to them. This empowers

the teams using the infrastructure to tailor and evolve it to their own needs.

Infrastructure as code offers alternatives to forcing centralized teams to act as gate‐

keepers. The ability for infrastructure users to easily and routinely modify their infra‐

structure means they can fix their mistakes quickly. And the use of automated testing

and staging of changes, as discussed throughout this book, mitigates the risk of dis‐

ruption to other services.

Infrastructure Resources Provided by the Platform

Infrastructure management has many moving parts. There are three key building

blocks provided by a dynamic infrastructure platform: compute, storage, and net‐

working (Figure 2-2).

Infrastructure Resources Provided by the Platform | 25

Most platforms offer a larger list of services than just these three, but nearly all of the

other services are just variations of these services (e.g., different types of storage) or

things that combine and run on top of them. Examples include server image manage‐

ment (storage to support compute), load balancing (networking, possibly using com‐

pute instances), messaging (networking and compute), and authentication (an

application running on compute instances). Even a serverless compute service like

Kinesis is implemented by running jobs on a normal compute resource.

Figure 2-2. Core resources provided by a dynamic infrastructure platform

Compute Resources

Compute resources are server instances. Any dynamic infrastructure platform will

have ways to create and destroy virtual servers (VMs), as well as a host of services and

features to make server management easier and more powerful.

Systems and processes to build, configure, and manage servers take the bulk of most

infrastructure teams’ time and attention, so much of the material in this book focuses

on doing this.

Storage Resources

Virtualized infrastructure consumes incredible amounts of storage—dynamically cre‐

ating servers gobbles up disk space at an alarming rate. The infrastructure platform

needs to allocate disk space to servers, snapshots, and templates. It also needs to

make storage available for applications and services running on the servers.

A cloud platform should manage disk space allocation for server resources transpar‐

ently; this is an implementation detail for the platform, but the person or process that

creates a server shouldn’t need to worry about where it’s stored. Virtualization plat‐

forms may not provide storage transparently, so scripts that provision servers may

need to find a storage pool with enough space and assign it to the new instance.

26 | Chapter 2: Dynamic Infrastructure Platforms

Even when space is transparently allocated for servers, there will be limits. These may

be hard limits, based on how much physical disk space your organization has

attached to your private cloud. Otherwise you may have budgetary limits, especially

with public clouds, which will deliver astronomical disk capacity as long as your

credit card holds out.

So it’s important for infrastructure teams to manage their use of disk space. At a min‐

imum, usage and costs should be made visible through a dashboard (a good use of

information radiators, which are discussed in “What Is An Information Radiator?”

on page 88), so that people know when to go through and cull things that are no

longer needed. Automatic cleanup scripts for old templates and snapshots will be

even more helpful.

Beyond the storage needs for the compute resources, a dynamic infrastructure plat‐

form should provide storage for services and applications that run on it. Most cloud

platforms have two classes of storage as a service: block storage and object storage.

Block storage

A block storage volume can be mounted on a server instance as if it were a local disk.

Examples of block storage services provided by cloud platforms include AWS EBS,

OpenStack Cinder, and GCE persistent disk.

Server instances normally have a root volume, which is what the server boots and

runs from. But additional persistent volumes can also be mounted and unmounted

from a server. These live beyond the lifespan of a particular server, making it espe‐

cially useful for managing persistent data and for continuity strategies, as discussed in

Chapter 14.

A block volume appears to be a local disk drive, but it’s important to understand

what lies underneath this abstraction. These volumes are usually allocated from net‐

work storage, so they may have issues with latency. The best approach is to research

the implementation, run tests that emulate your use cases, and tune how you config‐

ure and use storage to get the appropriate performance.

Object storage

Many cloud platforms offer an object storage service, where files can be stored and

accessed from different parts of the infrastructure, and even made available publicly.

Amazon’s S3, Google Cloud Storage, Rackspace Cloud Files, and OpenStack Swift are

all examples.

Object storage is usually designed for longer-term storage, with higher reliability than

block storage, less cost, but potentially higher latency. It’s useful for storing artifacts

that need to be accessed from multiple servers, as opposed to a block storage volume

which is only available to the server that mounts it.

Infrastructure Resources Provided by the Platform | 27

Networked filesystems

Infrastructure teams often find the need to share storage more directly between

server instances. One way to do this is using file sharing network protocols like NFS

or SMB/CIFS. A server instance can mount local or block storage and make it avail‐

able for other servers to mount and use. These file server technologies have long been

used in pre-virtualized environments, but care should be taken before jumping into

implementing them on a virtualized or cloud-based infrastructure.

Sharing a filesystem over a network when the “local” filesystem is itself mounted over

the network may be adding unnecessary overhead and complications. Using a tradi‐

tional network filesystem on cloud servers also creates extra administrative complex‐

ity and overhead. These file server technologies don’t necessarily cope well with file

server nodes that are routinely added and removed, which makes continuity

challenging.

Distributed and/or clustered file service tools such as GlusterFS, HDFS, or Ceph are

designed in a way that can make them more suitable for use in a dynamic infrastruc‐

ture. They ensure data availability across multiple server nodes and can usually han‐

dle nodes being added and removed more gracefully. However, don’t make

assumptions about how well this will work; be sure to test not only for performance

and latency, but also for the impact of changes to the cluster and for failure scenarios.

Before leaping into the specific technologies and tools to use, think through the use

cases. I’ve seen at least one team implement a complex and fragile glusterfs cluster

simply to achieve fault tolerance—to make sure the data from a server would be avail‐

able for a failover server to pick up if the first server fails. It is generally simpler and

more reliable to make direct use of services built into the platform, such as block

storage replication.

Network Resources

A dynamic infrastructure platform needs to manage connectivity between its own

elements, and with external networks. Networking routes, load balancing pools, and

firewall rules need to be updated as servers are added and removed from the

infrastructure.

Most virtualized and cloud infrastructure platforms provide dynamic, virtualized net‐

working to handle connectivity. However, these platforms are normally installed and

run as part of a larger estate with its own networking infrastructure. In order for the

dynamic infrastructure elements to work seamlessly with everything else, they need

to integrate with the surrounding network.

In many cases, it’s possible to configure the surrounding network in a fairly static

way so that it passes traffic through to the infrastructure platform. This can work well

enough when the outer network is kept simple. The more complex logic for things

28 | Chapter 2: Dynamic Infrastructure Platforms

like security, routing, and load balancing are handled by the dynamic platform. The

goal is to avoid needing to make manual changes to networking infrastructure in

order to support changes to the dynamic infrastructure.

However, it’s also possible to automate the configuration of the surrounding net‐

working so that it can handle dynamic infrastructure changes easily. This brings all of

the benefits of infrastructure as code to the networking estate, including repeatability,

continuous testing, and consistency.

Networking vendors are improving their support for software-defined networking

(SDN). Devices may not directly integrate with the virtualization or cloud platform.

But infrastructure definition tools (discussed in Chapter 3) can be used to orchestrate

across the different platforms, making changes to networking definitions to match

changes made to compute resources.

Automating Network Device Configuration

Although vendors are beginning to support software-defined networking, there are

still many networking devices in use that are not easy to automatically configure.

Many networking teams are used to carrying out configuration changes manually,

using a command-line interface. This has some obvious drawbacks:

• It’s easy to make a mistake, potentially causing outages.

• It isn’t easy to ensure configuration is consistent across devices.

• Reproducing configuration relies on backups, which may not be easily portable

across devices.

• Even routine changes need to be made by someone with strong knowledge of the

particular device.

Teams adopting infrastructure as code look for ways to automate device configura‐

tion to get around these issues. The first step is to understand the different ways the

particular device can be configured, and then options can be considered to manage

this automatically.

Most network devices have an option to import a configuration file, often using

TFTP. In this case, the configuration file can be checked into an VCS and automati‐

cally applied to devices by a CI or CD server. The techniques described for server

configuration definitions in Chapter 4 can be applied.

A more sophisticated approach is to dynamically generate the configuration file

before uploading it. This allows networking to be automatically defined with the rest

of the infrastructure—for example, setting firewall rules and load balancing configu‐

ration for devices as they are added.

Infrastructure Resources Provided by the Platform | 29

With any approach, having test devices where configuration can be automatically

applied and tested for correctness is essential. This allows the use of a change man‐

agement pipeline (as discussed in Chapter 12). Sometimes a particular device is too

expensive for a team to afford test instances. Any team in this situation should evalu‐

ate their priorities and less expensive options. A responsible team must ensure that

any critical part of its infrastructure can be routinely tested.

Types of Dynamic Infrastructure Platforms

The options for platforms to build a dynamic infrastructure are growing and chang‐

ing as more vendors and startups jump into the game. The following sections cover

categories that may be useful as a starting point to think about the approach that’s

right for your organization. These are loosely based on the definitions of cloud

deployment models in the NIST cloud definition mentioned earlier in this chapter.

Public IaaS Cloud

A public cloud is built and run by a vendor as a standard service. The computing

resources are shared with the vendor’s other customers, and you only pay for what

you use. Examples include Amazon AWS, Microsoft Azure, Digital Ocean, Google

GCE, and Rackspace Cloud.

Community IaaS Cloud

A community cloud is built and run for a limited group of customers (e.g., a cloud

for government agencies). The cloud may be tailored to meet requirements peculiar

to this group, such as following certain security standards. It may also limit exposure

—for example, guaranteeing that no customer data is stored or transferred over sys‐

tems or hardware shared with customers outside the community.

Depending on the commercial model, the vendor running the community cloud may

be paid for the total capacity available, no matter how much is actually used. Other‐

wise, each customer may pay only for what it uses, leaving the vendor responsible for

unused capacity.

Private IaaS Cloud

A private cloud is built and run for multiple consumers inside a single organization

(e.g., departments or teams within a company). A vendor may build it, run, or even

host it for the organization, but the resources are not shared with other organizations.

The company will typically pay for the total capacity available, even if not all of it is

used, although the company might have internal charges or capacity limits for

departments based on their use and budgets.

30 | Chapter 2: Dynamic Infrastructure Platforms

As with all clouds, a private IaaS cloud allows consumers to automatically provision

resources on demand in a self-service model, and they can be created and destroyed

automatically. Some organizations set up virtualized infrastructure without these

characteristics and call it a private cloud, but this is really hand-cranked virtualiza‐

tion, as explained in the next section.

Examples of IaaS cloud products include CloudStack, OpenStack, and VMware

vCloud.

Types of Clouds: IaaS, PaaS, and SaaS

IaaS, PaaS, and SaaS are terms that are used to understand the different service mod‐

els for cloud. Each of these is a cloud in the sense that it allows multiple users to share

computing resources, but their users tend to be very different.

The NIST cloud definition has very clear and useful definitions of these three service

models. Here is how I describe them:

Software as a Service (SaaS)

An application shared between end users. This may be user-facing, such as web-

hosted email, but there are actually a number of SaaS products aimed at infra‐

structure teams, including monitoring and even configuration management

servers.

Platform as a Service (PaaS)

A shared platform for application developers to build, test, and host their soft‐

ware. It abstracts the underlying infrastructure, so developers don’t need to

worry about things like how many servers to allocate for their application or

database cluster: it just happens. Many IaaS cloud vendors offer services that are

essentially elements of a PaaS (e.g., managed databases like Amazon RDS).

Infrastructure as a Service (IaaS)

A shared hardware infrastructure that system administrators can use to build vir‐

tual infrastructure for services.

Antipattern: Hand-Cranked Cloud

Hand-cranked virtual infrastructure uses virtualization tools to manage hardware

resources, but doesn’t provide them to users dynamically or with a self-service model.

I’ve seen organizations do this with expensive virtualization software, and even

cloud-capable software like VMware vCloud. They keep the old, centralized model,

requiring users to file tickets to request a server. An IT person creates each server,

working under an SLA that gives them a few days to do the work, and then returns

the login details to the user.

Types of Dynamic Infrastructure Platforms | 31

No matter how impressive and expensive the software used is, if the service model is

neither dynamic nor self-service, it won’t support infrastructure as code.

Hybrid and Mixed Cloud Options

Hybrid cloud is simply where parts of the infrastructure runs in a private cloud, and

parts run in a public cloud. Although not strictly hybrid cloud, it’s very common to

have some services running on cloud infrastructure, integrated with other services

running in a more traditionally managed infrastructure.

There are several reasons for this mixed infrastructure situation:

• Regulatory or other security requirements may require some data to be kept in a

more restricted environment.

• Some services may have more variable capacity needs, which makes public cloud

hosting compelling, while others may be fairly static and so don’t have as much

need to run in a public cloud.

• It may not make sense to invest in migrating some existing services out of tradi‐

tional infrastructure. This is especially true when an organization is still fairly

early in adopting public cloud. But in many cases, there may be a limited number

of services that will never be suitable for moving to public cloud.

Bare-Metal Clouds

With virtualized infrastructure, multiple servers can run on a single physical server

and be shuffled between servers as needed. This helps to maximize the utilization of

available hardware. But there are still many reasons to run an OS directly on server

hardware rather than in a VM. Fortunately, even in these cases, infrastructure as code

can still be applied.

There are many reasons why running directly on hardware may be the best choice for

a given application or service. Virtualization adds performance overhead, because it

inserts extra software layers between the application and the hardware resources it

uses.

Processes on one VM can impact the performance of other VMs running on the

same host. For example, a VM running a database carrying out an intensive opera‐

tion could monopolize I/O, creating issues for other VMs. This type of contention is

especially bad for applications that need to guarantee consistent performance.

Even the abstractions themselves can cause issues. Software written to assume a

mounted disk is truly local may suffer when the disk is actually mounted over the

network from a SAN.

32 | Chapter 2: Dynamic Infrastructure Platforms

Of course, even when processes can run happily in a VM, the host systems them‐

selves need to be well managed. Infrastructure as code practices can help ensure that

the hypervisors and management services of the infrastructure platform are kept con‐

sistent, easily rebuilt, well tested, and updated, as with other elements of the infra‐

structure.

In these cases, the team needs an automated, dynamic infrastructure platform that

works at the level of hardware. It needs to have the same capabilities looked at earlier

in this chapter. This includes being able to provision and allocate compute resource,

storage, and networking. It should be programmable, dynamic, and support a self-

service model so that these activities can be scripted.

Some tools that can be used to implement a dynamic infrastructure platform with

bare-metal servers include Cobbler, FAI - Fully Automatic Installation, Foreman, and

Crowbar. These tools can take advantage of the PXE specification Preboot Execution

Environment to boot a basic OS image downloaded from the network, which then

runs an installer to download and boot an OS installer image. The installer image will

run a script, perhaps with something like Kickstart, to configure the OS, and then

potentially run a configuration management tool like Chef or Puppet.

Often, triggering a server to use PXE to boot a network image requires pressing a

function key while the server starts. This could be tricky to do unattended. However,

many hardware vendors have lights-out management (LOM) functionality that

makes it possible to do this remotely, and even automatically.

Many cases that lead to bare-metal infrastructure—for example, high performance

database servers—are driven by the need to use storage directly attached to the

server, which removes the need for sophisticated dynamic storage management. In

other cases, storage area networks (SANs) and related technologies and products can

be used to provision and allocate storage. There are a growing number of sophistica‐

ted storage virtualization products that may be of interest as well.

Managing the configuration of hardware network devices to support a dynamic

infrastructure is a particular challenge. For example, you may need to add and

remove servers from a load balancer if they are created and destroyed automatically

in response to demand. Network devices tend to be difficult to automatically config‐

ure, although many are able to load configuration files over the network—for exam‐

ple, from a TFTP server.

Teams can and do build tooling to automatically build, test, and load configuration

files to hardware network devices. Fortunately, as mentioned earlier, the growing

software-defined networking (SDN) movement is leading vendors to make this easier

for their customers, and even create cross-vendor standards for doing it.

Types of Dynamic Infrastructure Platforms | 33

Deciding on a Dynamic Infrastructure Platform

Having looked at the characteristics a dynamic infrastructure platform needs to sup‐

port infrastructure as code, and different types of platforms, let’s explore some of the

key considerations when choosing a platform.

Public or Private?

Proposing to move an organization’s IT infrastructure to a public cloud provider

raises the following concerns.

Security and data protection

The number one concern with moving to public cloud is usually security. Unlike nor‐

mal dedicated hosting providers, a cloud provider hosts your organization’s data and

computing resources on physical hardware, networks, and storage devices alongside

those of their other customers. Some of these other customers may be your competi‐

tors, and others may be criminals looking to exploit weaknesses to access confidential

data or to damage your organization.

But many organizations use public cloud successfully and securely, including massive

commercial operations handling sensitive financial transactions and customer data.

Examples include Amazon’s own ecommerce operations, Suncorp,1 and Tesco. 2

Keeping data on dedicated hardware, and even in dedicated data centers, does not

guarantee security. There are a number of examples of high-profile companies that

have lost thousands of customer credit card numbers from private data centers, and

far more that haven’t been revealed to the public.

As always, whether using public cloud, external vendor, or internal IT, there is no

substitute for good security strategy and implementation. Your team should thor‐

oughly consider the security concerns and threat models for your services. They can

then apply this understanding to the different options for hosting and work out the

best approach. In many cases, a hybrid or mixed infrastructure approach may be

appropriate to isolate certain classes of data and operations.

Legal constraints on hosting locations

Some organizations have constraints around where their data and systems can be

hosted. Systems contracted by governmental organizations may be required to be

hosted in the same country, or might be forbidden to be hosted in certain others. Pri‐

1 “AWS Case Study: Suncorp” ; see also “Pssst, Amazon Cloud Is Not Really New to Banks”.

2 “How Tesco Bank has adopted AWS cloud as ‘business as usual’ in eight months”

34 | Chapter 2: Dynamic Infrastructure Platforms

vacy laws in some jurisdictions don’t allow user data to be transferred to countries

with less strict protections on its use.

For example, it is illegal (as of this writing) for systems running in Europe to store

user data on computers running in countries such as the United States that don’t

have strong personal privacy laws. When I’ve worked with European companies using AWS, we had to take care to only store data in the EU regions.

Your organization should understand what constraints apply. If you do have these

constraints, you need to be aware of where your cloud service providers host your

systems and data, and be sure they have sufficient guarantees to adhere to these. This

is true not only of IaaS cloud providers, but also of services you use for things like

monitoring, email, and log aggregation.

Requirements for variable capacity

Be clear on your organization’s need for capacity, and how this is affected by having

dedicated infrastructure versus using a vendor’s shared pool. An important benefit of

using a public cloud is that you can adjust your capacity quickly, and only pay for

what you need as you use it.

This is useful for services with variable usage levels. It’s very common for services to

have daily and weekly cycles with significant differences between their peaks and low

periods. A business application may be heavily used during working hours, but very

little during the evening and weekends. Entertainment applications often have the

reverse pattern. Retail services, especially in Western countries, need considerably

more capacity in the periods leading up to the annual holidays than they do for the

rest of the year.

Another case for using shared resources are a rapidly growing service, such as a new

product. These often grow in spurts, as features and marketing bring new users in

waves. Paying for fixed capacity that you may or may not need is a risk for a new

business or product, so being able to rapidly add capacity only when it’s proven to be

needed is hugely useful.

While the public cloud model is perfectly adapted to handle variable capacity and

rapid growth, some vendors providing dedicated infrastructure may also be able to

meet these requirements. A vendor that has a large inventory of hardware, or a highly

efficient supply chain, may be able to guarantee very short turnaround times for

adding dedicated hardware capacity to your infrastructure. They may also be willing

to offer short-term periods—for example, adding hardware for a few days or weeks

for a particular event.

Deciding on a Dynamic Infrastructure Platform | 35

Total costs of building your own cloud

The sunk cost of existing infrastructure, data centers, and knowledge is a common

but questionable driver for self-hosting. Moving to the cloud and potentially scrap‐

ping existing investment feels wasteful. But this is an example of the sunk cost fallacy.

Sticking with hardware you already own will force you to continue investing in it,

which may well be more expensive than moving to an alternative in the medium

term.

A common mistake in comparing hosting costs is to only count the price of the hard‐

ware. Managing physical infrastructure takes skills and time, not to mention manage‐

ment focus. Before taking the decision to build or keep your own hardware and

related infrastructure, make sure you’re being realistic about the total costs.

Commodity or differentiator

There are many aspects of IT that seem cheap to outsource, but have a high risk of

compromising the organization’s ability to respond quickly and effectively. Hosting,

particularly at the hardware level, is not one of these. Infrastructure provisioning has

become a commodity, to the point where it can be offered as a standardized, inter‐

changeable, automated service with a programmable interface.

Very few organizations today can turn the ability to select which model hard drive to

install in their servers into a competitive advantage. Not many can build up enough

competency in data center operations that they can do it cheaply or more respon‐

sively than Google, Amazon, or Microsoft.

This isn’t to say there are no organizations that can build competitive offerings using

innovations or specializations in the data center. But be realistic about whether or not

you’re one of them.

Managed Cloud and Virtualization Vendors

Public cloud vendors provide a “hands-off,” one-size fits-all service. Smaller and spe‐

cialist cloud vendors may offer more customized services, including better support

and consultancy services, or services specialized for smaller target markets. Some

vendors will even build and manage private clouds for you in data centers of your

choosing. This can be particularly appealing when going into countries where the

major public cloud vendors don’t yet offer data centers, such as China (as of the pub‐

lication of this book).

Unfortunately, many IT service providers are quick to put the “cloud” label on service

offerings that aren’t suitable for customers who are looking to manage their own soft‐

ware infrastructure on a dynamic infrastructure. As described earlier in this chapter,

your dynamic infrastructure platform needs to be programmable, dynamic, and self-

service.

36 | Chapter 2: Dynamic Infrastructure Platforms

Watch out for pricing models and contracts that assume the number of virtual

machines will be static. The process to provision a machine should not need a change

request, raising a ticket, or any human involvement. The cost for a VM should not be

fixed for a long period; an hour is pretty normal in the cloud market.

Cloud Portability

When planning a move to a cloud-based infrastructure, one requirement that often

comes up is avoiding lock-in to a single cloud vendor. Some toolsets and products

offer to make portability between cloud platforms easier. However, care is needed to

avoid spending significant time and money on this requirement only to find later on

that migrating to a different cloud vendor is still complex, costly, and risky.

It’s important to be realistic about what can be achieved in terms of portability. Typi‐

cal drivers for this requirement are to manage the risk of needing to change cloud

vendors at a future point, and to keep the option of making such a change viable by

keeping the cost and risk of a potential migration low. In these cases, it’s not neces‐

sary to guarantee migration will involve zero effort.

The only way to guarantee leaving a cloud vendor will be nearly painless is to build

an infrastructure across multiple vendors from the start. All services should be rou‐

tinely running on more than one cloud vendor, all changes applied and used across

the clouds, and all data replicated. Having the services actually in use, as opposed to

deployed in cold standby, guarantees their operability. This strategy has the added

advantage of offering tolerance to failures within a single cloud vendor.

Running across multiple clouds eliminates the risk of migration and lock-in, while

adding significantly to the upfront and ongoing cost and time of implementing and

operating the infrastructure.

Techniques for portability

If systems are run on a single cloud, there are some techniques that make it easier to

migrate later.

One technique is to avoid using vendor-specific functionality. This has the drawback

of missing out on useful features and services that may save time and cost in building

and running systems. It may be enough to keep track of those vendor-provided serv‐

ices that are used by the infrastructure, and noting that migration would require

either finding a vendor that offers comparable services, or else building custom

implementations to replace them.

Once systems are successfully running and in use on the first cloud, the organization

can make priority calls about refactoring systems to reduce dependence on the ven‐

dor over time.

Deciding on a Dynamic Infrastructure Platform | 37

This highlights another key strategy for making a future vendor migration easier,

which is to have the capability to refactor infrastructure and services easily and confi‐

dently. This, of course, is what this book intends to help with. By ensuring that

changes to an infrastructure are made using fast and rigorous automated testing pro‐

cesses, a team can confidently refactor it for use on a different cloud platform.

The point is that building the capability to make changes to infrastructure in

response to changing requirements—including the requirement to change vendors of

parts of the infrastructure—is more powerful and realistic than attempting to build

an infrastructure that won’t need to be changed in the future, even as unknown

requirements emerge.

There are some tools and technologies that may help with portability. Some vendors

offer tools or services for automating infrastructure that handle the details of cloud-

specific integration for you. This means your infrastructure can run on any cloud

supported by the vendor. The pitfall, of course, is that you may lock yourself into the

portability tool vendor.

Containerization may be useful to reduce cloud-vendor lock-in. Packaging applica‐

tions removes application-specific configuration and files from the underlying

servers, which makes them easier to run in new hosting environments. But a heavily

containerized infrastructure needs tooling and services to manage and orchestrate the

containers, so teams going this route will need to consider how that can be ported

across clouds. Container orchestration is discussed in more detail in “Container

Orchestration Tools” on page 92.

A final potential strategy to avoid lock-in is to use a cloud vendor whose service is

run on a nonproprietary platform. In other words, if a cloud is built using standard

virtualization software that is also used by other, competing cloud vendors, migration

is likely to be easier than moving from a vendor with a proprietary platform.

Mechanical Sympathy with the Cloud and Virtualization

Martin Thompson has borrowed the term mechanical sympathy from Formula One

driver Jackie Stewart and brought it to IT. 3 A successful driver like Stewart has an

innate understanding of how his car works, so he can get the most out of it and avoid

failures. For an IT professional, the deeper and stronger your understanding of how

the system works down the stack and into the hardware, the more proficient you’ll be

at getting the most from it.

The history of software has involved layering one abstraction over another. Operat‐

ing systems, programming languages, and now virtualization have each helped peo‐

3 See Martin’s blog post “Why Mechanical Sympathy”.

38 | Chapter 2: Dynamic Infrastructure Platforms

ple to be more productive by simplifying the way they interact with computer

systems. You don’t need to worry about which CPU register to store a particular

value in, you don’t need to think about how to allocate heap to different objects to

avoid overlapping them, and you don’t care which hardware server a particular vir‐

tual machine is running on.

Except when you do.

Hardware still lurks beneath the abstractions, and understanding what happens

behind the facade of APIs and virtual CPU units is useful (Figure 2-3). It can help

you to build systems that gracefully handle hardware failures, avoid hidden perfor‐

mance bottlenecks, and exploit potential sympathies—tweaks that make the software

align with the underlying systems to work more reliably and effectively than naively

written software would.

For example, the Netflix team knew that a percentage of AWS instances, when provi‐

sioned, will perform much worse than the average instance, whether because of hard‐

ware issues or simply because they happen to be sharing hardware with someone

else’s poorly behaving systems. So they wrote their provisioning scripts to immedi‐

ately test the performance of each new instance. If it doesn’t meet their standards, the

script destroys the instance and tries again with a new instance.

Understanding the typical memory and CPU capacity of the hardware servers used

by your platform can help to size your VMs to get the most out of them. Some teams

choose their AWS instance size to maximize their chances of getting a hardware

server entirely to themselves, even when they don’t need the full capacity.

Figure 2-3. Abstractions with virtualization

Mechanical Sympathy with the Cloud and Virtualization | 39

Understanding storage options and networking is useful to ensure that disk reads and

writes don’t become a bottleneck. It’s not a simple matter of choosing the fastest type

of storage option available; selecting high performance local SSD drives may have

implications for portability, cost, and even availability of resources.

This extends up and down the stack. Software and infrastructure should be architec‐

ted, designed, and implemented with an understanding of the true architecture of the

hardware, networking, storage, and the dynamic infrastructure platform.

An infrastructure team should seek out and read through every whitepaper, article,

conference talk, and blog post they can find about the platform they’re using. Bring

in experts from your vendor to review your systems, from high-level architecture

down to implementation details. Be sure to ask questions about how your designs

and implementation will work with their physical infrastructure.

If you’re using virtualization infrastructure managed by your own organization, then

there’s no excuse not to collaborate. Make sure your software and infrastructure are

designed holistically, and continuously measured and modified to get the best perfor‐

mance and reliability possible.

Conclusion

With a dynamic infrastructure platform in place, the next step is to select and imple‐

ment tools to define and manage the resources provided by the platform. This is the

topic of the next chapter.

40 | Chapter 2: Dynamic Infrastructure Platforms

CHAPTER 3

Infrastructure Definition Tools

The previous chapter described virtualization and cloud platforms that provide

dynamic infrastructure resources, including compute, networking, and storage. This

chapter discusses tools that teams can use to manage those resources following the

principles of infrastructure as code.

An infrastructure definition tool, such Cloud Formation, Terraform, or OpenStack

Heat, allows people to specify what infrastructure resources they want to allocate and

how they should be configured. The tool then uses the dynamic infrastructure plat‐

form to implement the specification.

Of course, people can simply use the platform’s user interface to create and manage

resources. There are also third-party products that provide a graphical user interface

(GUI) to interactively manage virtual and cloud infrastructure. But to gain the bene‐

fits of infrastructure as code, infrastructure needs to be managed in a way that is

repeatable, testable, reusable, and self-documenting.

The first half of this chapter will offer guidelines for selecting and using tools to sup‐

port this way of working. These guidelines are not specific to infrastructure definition

tools; they also apply to server configuration tools and other infrastructure services.

The second half of this chapter is specifically about infrastructure definition files and

tools. It gives examples of types and ways of defining infrastructure resources. It also

looks at the use of configuration registries to support infrastructure configuration.

Patterns for Defining Infrastructure

Chapter 9 builds on the understanding of infrastructure definition

tools from this chapter. That chapter will delve into different archi‐

tectural design patterns for infrastructure.

41

Choosing Tools for Infrastructure as Code

Infrastructure as code approaches automation with the challenges, principles, and

practices described in Chapter 1 in mind. But many tools and products on the market

aren’t designed according to these principles. Although it can be possible to make

these tools fit with infrastructure as code, it’s much easier to use tools that are aligned

to work this way.

The following sections discuss a few requirements for tools to work well with infra‐

structure as code. These apply to all infrastructure management tools, from the infra‐

structure automation platform, to infrastructure definition tools described in this

chapter, as well as server configuration tools and services described in later chapters.

Requirement: Scriptable Interface

Tools that treat APIs and command-line tools as a first-class interface are easier to

script than those that treat a GUI or web-based UI as the most important way of

interacting with it.

Many infrastructure management tools are sold on the basis of a slick graphical inter‐

face. The idea is that dragging and dropping objects and selecting items from catalogs

simplifies the job of infrastructure management. There’s even the promise that less

skilled people can manage infrastructure using these tools.

Giving infrastructure users the ability to provision and manage their own infrastruc‐

ture is valuable. It can free infrastructure team members to focus on work that needs

their deeper skills. However, in order for self-service tooling to work effectively, it

must be possible for technical people to get under the hood of the tools.

The automobile industry is fairly mature, being over 100 years old. But you still

wouldn’t buy a car with the hood welded shut. Even if you don’t know a spark plug

from a gasket, you want to know a mechanic can get it and fix things. You don’t want

to send your car back to the factory to get the oil changed.

Command-line tools, programmable APIs, and open source code are how teams get

under the hood of their infrastructure. This is necessary not only to tweak and fix

things, but also to integrate different tools and services.

Requirement: Unattended Mode for Command-Line Tools

A command-line interface (CLI) tool should be easy to script. This means it should

be designed to be run within an unattended shell or batch script:

• It should be able to take input from other tools and the scripting language—for

example, through standard input, environment variables, and command-line

parameters.

42 | Chapter 3: Infrastructure Definition Tools

• Output should be easily usable by other other tools and the scripting language. It

helps if output is structured so that it can be parsed, rather than embedded in

text.

• It should not require input to be manually typed on the console, even passwords.

There should be scriptable alternatives for accepting licenses, providing creden‐

tials, or otherwise authorizing the tool.

A tool that stops for interactive input, such as accepting license terms or prompting

for a manually entered password, is a tool not designed for automation. Tools should

take arguments or configuration parameters that let them run without prompting for

input.

The common Unix command-line tools are the exemplar of good CLI design. Rather

than a single tool that does everything, they are a collection of small tools, each of

which does one thing well (grep includes or excludes lines, sed alters the content of

lines, sort sorts them, etc.). These simple tools can be chained together in pipelines

to carry out complex tasks.

For tools that run as services, a good programmable API is essen‐

tial. The guidelines for APIs for dynamic infrastructure platforms,

discussed in “Programmable” on page 23, apply here.

Requirement: Support for Unattended Execution

Most system administrators start out writing scripts to help them with common

tasks. Writing a script that can be run on a new server to install and configure a web

server ticks many of the boxes for infrastructure is code. The processes is repeatable,

consistent, and transparent.

But often, people write scripts that require manual steps. For example, a web server

script might need a sysadmin to copy it to a new server and start it. They might need

to edit the script to specify host names and IP addresses for the particular server.

Scripts that need this kind of manual attention don’t free team members to focus on

other things. 1 Tasks that can be reliably carried out without any human involvement

are building blocks for a truly automated infrastructure. Scripts that can be triggered

1 In The Practice of Cloud System Administration (Addison-Wesley Professional), Limoncelli, Chalup, and Hogan talk about tool building versus automation. Tool building is writing a script or tools to make a manual

task easier. Automation is eliminating the need for a human to carry out the task. They make the comparison

to an auto factory worker using a high-powered paint sprayer to paint car doors, versus having an unattended

robotic painting system.

Choosing Tools for Infrastructure as Code | 43

and run by other scripts and tools can then be automatically tested with no effort.

They can also be used as part of automated scaling and recovery routines.

Ad Hoc Scripts Lead to the Automation Fear Spiral

I visited a systems team at a financial services company. The team had been using

Puppet for nearly a year, writing manifests and checking them into source control.

But they only applied the manifests when they had a specific change to make. They

would tweak the manifests to implement the specific change they wanted, and to

specify which machines they would apply to. More often than not, Puppet would run

with errors or even fail on at least some of the machines.

The team decided it was time to move beyond treating Puppet as a scripting tool, and

learn how to run it continuously. They sent people to a Puppet course, and began

migrating their servers into a continuously synchronized regime. A year later, they

had far more confidence in their automation and were exploring ways to increase

their use of automated testing to gain even more confidence.

These are some characteristics of scripts and tasks that help to support reliable unat‐

tended execution:

Idempotent

It should be possible to execute the same script or task multiple times without

bad effects.

Pre-checks

A task should validate its starting conditions are correct, and fail with a visible

and useful error if not, leaving things in a usable state.

Post-checks

A task should check that it has succeeded in making the changes. This isn’t just a

matter of checking return codes on commands, but proving that the end result is

there. For example, checking that a virtual host has been added to a web server

could involve making an HTTP request to the web server.

Visible failure

When a task fails to execute correctly, it should be visible to the team. This may

involve an information radiator and/or integration with monitoring services

(covered in “What Is An Information Radiator?” on page 88 and “Alerting: Tell

Me When Something Is Wrong” on page 87).

Parameterized

Tasks should be applicable to multiple operations of a similar type. For example,

a single script can be used to configure multiple virtual hosts, even ones with dif‐

ferent characteristics. The script will need a way to find the parameters for a par‐

44 | Chapter 3: Infrastructure Definition Tools

ticular virtual host, and some conditional logic or templating to configure it for

the specific situation.

Implementing this takes discipline for the infrastructure team. Be ruthless about find‐

ing manual tasks that can be automated. Use good coding practices to ensure scripts

are robust. And strip out tasks that are difficult to automate, even if it means replac‐

ing major pieces of the infrastructure with ones that offer better support for unatten‐

ded automation.

Idempotency

In order to allow a tool to repeatedly run unattended, it needs to be

idempotent. This means that the result of running the tool should

be the same no matter how many times it’s run. Idempotent scripts

and tools can be set to run continuously (for example, at a fixed

time interval), which helps to prevent configuration drift and

improve confidence in automation.

Here’s an example of a shell script that is not idempotent:

echo "spock:*:1010:1010:Spock:/home/spock:/bin/sh" \

>> /etc/passwd

Running this script once may have the result you want: the user

spock is added to the /etc/passwd file. But running it multiple times

will end up with many duplicate entries for the user.

A good domain-specific language (DSL) for server configuration

works by having you define the state you want something to be in,

and then doing whatever is needed to bring it into that state. This

should happen without side effects from being applied to the same

server many times. The following Puppet snippet is an example of

this:

user { "spock":

ensure => present,

gid => "science",

home => "/home/spock",

shell => "/bin/sh"

}

This definition can be applied to a server many times.

Requirement: Externalized Configuration

Some infrastructure management tools are designed to store configuration data inter‐

nally, in a “black box” fashion. The only way to access and edit the configuration is

through the tool’s interfaces. The alternative is storing configuration externally, in

files that can be read and edited using common text editing tools.

Choosing Tools for Infrastructure as Code | 45

The black box configuration pattern is intended to simplify management. The tool

can offer a helpful interface to users, only presenting valid options. But the external‐

ized configuration pattern tends to be more flexible, especially when used as part of

an ecosystem of similar infrastructure tooling.

Lessons from Software Source Code

The externalized configuration pattern mirrors the way software

source code works. There are some development environments

that keep the source code hidden away, such as Visual Basic for

Applications. But the dominant model is keeping programming

source code in external files.

An integrated development environment (IDE) can provide an

excellent user experience for managing and editing externalized

source files while still keeping the source available to other tools

and systems outside the IDE. This gives development teams, and

even individual developers in a team, the freedom to choose the

tools they prefer.

Some IDEs have support for server configuration definitions like

Chef recipes and Puppet manifests. This may not be as mature as

support for general-purpose programming languages like Java and

C#, but it’s possible that the increasing popularity of infrastructure

automation will bring better IDE support over time.

Externalized configuration for a server, environment, network rule, or any other

infrastructure element simplifies repeatability. It makes it easy to:

• Consistently provision many instances of the element type

• Create accurate test instances of the element

• Quickly rebuild a lost or broken instance of the element

Systems configured by clicking in a GUI inevitably become inconsistent. Applying

configuration from a definition file ensures that every system is built the same way,

every time.

A team’s ability to work with configuration that’s managed internally by a tool is

limited to interactions that the tool supports. Configuration externalized as text files,

on the other hand, can be accessed and manipulated by any off-the-shelf tool. You

can edit them with whatever text editor you prefer, manipulate them with common

command-line tools, and write your own scripts to manage them.

The ability to use this vast ecosystem of text file–friendly tools to bear on infrastruc‐

ture configuration gives a team far more control than it can have with a proprietary

tool.

46 | Chapter 3: Infrastructure Definition Tools

Using a standard VCS tool

The most important off-the-shelf tool that can be used with externalized configura‐

tion is a VCS. This supports the benefits of “Version All the Things” on page 15:

traceability of changes, ability to roll back changes that go wrong, correlation

between changes to different parts of the infrastructure, visibility to everyone in the

team, and the actionability to trigger automated tests and pipelines.

Some black box automation tools embed their own VCS functionality. But because

this isn’t the core function of these tools, they’re normally not nearly as full featured

as a standalone VCS. Externalized configuration allows teams to select the VCS with

the features they need, and to swap it out later if they find a better one.

The Basics of Using a VCS

Modern software development teams use a VCS without even thinking about it. For

many system administration teams, however, it’s not a natural part of their workflow.

The VCS acts as the hub of infrastructure as code. Anything that can be done to infra‐

structure is captured in scripts, configuration files, and definition files checked into

version control. When someone wants to make a change, they can check the files out

of the VCS, make the changes by editing the files, and then commit the new file ver‐

sions back into the VCS.

Committing a change into the VCS makes it available to be applied to infrastructure.

If the team uses a change management pipeline (as described in Chapter 12), the

change is automatically applied to test environments and tested. The changes are pro‐

gressed through a series of test stages, and are only made available for use in impor‐

tant environments after passing all of them.

The VCS is a single source of truth. If two different team members check out files and

work on changes to the infrastructure, they could make incompatible changes. For

example, I might add configuration for an application server while Jim is making a

firewall rule change that happens to block access to my server. If we each apply our

change directly to the infrastructure, we have no visibility of what the other is doing.

We may reapply our changes to try to force what we want, but we’ll keep undoing

each other’s work.

But if we each need to commit our change in order for it to be applied, then we will

quickly understand how our changes have conflicted. The current state of the files in

the VCS are an accurate representation of what’s being applied to our infrastructure.

Choosing Tools for Infrastructure as Code | 47

If we use continuous integration to automatically apply our changes to test infrastruc‐

ture every time we commit, then we’ll be notified as soon as someone makes a change

that breaks something. And if we have good habits of pulling the latest changes before

we commit our own changes, then the second person to commit will discover (before

they commit) that someone has changed something that may affect their own work.

Workflows for infrastructure teams are discussed in more detail in Chapter 13.

Configuration Definition Files

“Configuration definition file” is a generic term for the tool-specific files used to

drive infrastructure automation tools. Most tools seem to have their own names:

playbooks, cookbooks, manifests, templates, and so on. A configuration definition

could be any one of these, or even a configuration file or script.

System administrators have been using scripts to automate infrastructure manage‐

ment tasks for decades. General-purpose scripting languages like Bash, Perl, Power‐

shell, Ruby, and Python are still an essential part of an infrastructure team’s toolkit.

But the newer generation of infrastructure tools provide their own DSLs (domain-

specific languages, as mentioned earlier), which are specialized for a particular pur‐

pose. Server configuration tools like CFEngine, Puppet, and Chef have languages that

are focused on what goes onto a server. Infrastructure definition tools like Cloud For‐

mation, Heat, and Terraform have languages that are tailored for specifying high-

level infrastructure elements and relationships. Packer has a language specifically for

defining how to build server images.

Example 3-1 defines a user account. A server configuration tool will read this defini‐

tion and ensure that it exists on the relevant server, and that is has the specified

attributes.

Example 3-1. Configuration definition for a user account

user "spock"

state active

gid "science"

home "/home/spock"

shell "/bin/sh"

Defining the user account in a definition file has several advantages over writing a

script to explicitly create the account.

One advantage is clarity. The definition is easy to understand, as it only contains the

key information for the user account, rather than embedding it within scripting logic.

This makes it easier to understand and easier to find errors.

48 | Chapter 3: Infrastructure Definition Tools

Another advantage is that the logic for applying each type of change is separated and

reusable. Most configuration tools have an extensive library of definition types for

things like managing user accounts, software packages, files and directories, and

many other things. These are written to be comprehensive, so that out of the box they

do the right thing across different operating systems, distributions, and versions.

They tend to have options for handling the various systems an infrastructure team

may use—for example, different authentication systems for users, network filesystem

mounts, and DNS.

This prebuilt logic saves infrastructure teams from the work of writing fairly standard

logic themselves and tends to be well written and well tested. Even if the off-the-shelf

definition types available from a tool aren’t enough, almost all of these tools allow

teams to write their own custom definitions and implementations.

Reusability with Configuration Definitions

The ability to reuse a configuration definition across elements and environments is

essential for a consistent infrastructure and repeatable processes. Rather than having

three different definition files for the QA, staging, and production environments, the

same definition file should be used for all three. Any reasonable DSL for infrastruc‐

ture configuration should have a way to use parameters.

Example 3-2 takes parameters for which size of VM to create, which AMI image to

use to create the server, and the name of the environment the web server will run in.

Example 3-2. Parameterized environment definition

aws_instance: web_server

name: web-${var.environment}

ami: ${var.web_server_ami}

instance_type: ${var.instance_type}

There may be different methods to pass parameters into the infrastructure tool when

it applies this definition. It could take command-line arguments, environment vari‐

ables, or read the parameters from a file or configuration registry service (as

described later in this chapter).

Parameters should be set in a consistent, repeatable way, rather than being entered

manually on a command line. When using a change management pipeline, the pipe‐

line orchestration tool (e.g., a CI or CD server like Jenkins or GoCD) can be used to

set parameters for each stage of the pipeline. Alternatively, parameters may be man‐

aged in a configuration registry.

Configuration Definition Files | 49

Working with Infrastructure Definition Tools

Now that we’ve covered general guidelines for infrastructure as code tools, we can dig

more deeply into the specifics. Sometimes called infrastructure orchestration tools,

these tools are used to define, implement, and update IT infrastructure architecture.

The infrastructure is specified in configuration definition files. The tool uses these

definitions to provision, modify, or remove elements of the infrastructure so that it

matches the specification. It does this by integrating with the dynamic infrastructure

platform’s APIs (as discussed in the previous chapter).

Examples of infrastructure definition tools that work this way include AWS Cloud

Formation, HashiCorp Terraform, OpenStack Heat, and Chef Provisioning. 2

Many teams use procedural scripts to provision infrastructure, especially those who

started working this way before more standard tools emerged. These can be shell or

batch scripts that call CLI tools to interact with the infrastructure platform—for

example, AWS CLI for AWS. Or they might be written in a general-purpose language

with a library to use the infrastructure platform API. These could be Ruby scripts

using the Fog library, Python scripts with the Boto library, or Golang scripts with the

AWS SDK for Go or Google Cloud library.

Definition of “Provisioning”

“Provisioning” is a term that can be used to mean somewhat differ‐

ent things. In this book, provisioning is used to mean making an

infrastructure element such as a server or network device ready for

use. Depending on what is being provisioned, this can involve:

• Assigning resources to the element

• Instantiating the element

• Installing software onto the element

• Configuring the element

• Registering the element with infrastructure services

At the end of the provisioning process, the element is fully ready

for use.

“Provisioning” is sometimes used to refer to a more narrow part of

this process. For instance, Terraform and Vagrant both use it to

define the callout to a server configuration tool like Chef or Puppet

to configure a server after it has been created.

2 As with many of the tools described in this book, infrastructure definition tools are evolving quickly, so the

list of tools is likely to change by the time you read this.

50 | Chapter 3: Infrastructure Definition Tools

Provisioning Infrastructure with Procedural Scripts

On one team, we wrote our own command-line tool in Ruby to standardize our

server provisioning process on Rackspace Cloud. We called the tool “spin,” as in,

“spin up a server.” The script took a few command-line arguments so that it could be

used to create a few different types of servers in different environments. An early ver‐

sion of the script shown in Example 3-3 would be run like this to create an applica‐

tion server in our QA environment:

# spin qa app

Our spin script included the logic for defining what a server of type “appserver”

should be: what size, what starting image to use, and so on. It also used “qa” to select

details about the environment the server should be added into. Whenever we needed

to change the specification for a particular server type or environment, we would edit

the script to make the change, and all new servers would consistently be created

according to the new specification.

Example 3-3. Script to provision a server based on type and environment

#!/usr/bin/env ruby

require 'aws-sdk'

require 'yaml'

usage = 'spin <qa|stage|prod> <web|app|db>'

abort("Wrong number of arguments. Usage: #{usage}") unless ARGV.size == 2

environment = ARGV[0]

server_type = ARGV[1]

#

# Set subnet_id based on the environment defined on the command line.

# The options are hardcoded in this script.

subnet_id = case environment

when 'qa'

'subnet-12345678'

when 'stage'

'subnet-abcdabcd'

when 'prod'

'subnet-a1b2c3d4'

else

abort("Unknown environment '#{environment}'. Usage: #{usage}")

end

#

# Set the AMI image ID based on the server type specified on the command line.

# Again, the options are hardcoded here.

image_id = case server_type

when 'web'

Working with Infrastructure Definition Tools | 51

'ami-87654321'

when 'app'

'ami-dcbadcba'

when 'db'

'ami-4d3c2b1a'

else

abort("Unknown server type '#{server_type}'. Usage: #{usage}")

end

#

# Use the AWS Ruby API to create the new server

ec2 = Aws::EC2::Client.new(region: 'eu-west-1')

resp = ec2.run_instances(

image_id: image_id,

min_count: 1,

max_count: 1,

key_name: 'my-key',

instance_type: 't2.micro',

subnet_id: subnet_id

)

#

# Print the server details returned by the API

puts resp.data[:instances].first.to_yaml

This met our requirement for a repeatable, transparent process. The decisions of how

to create the server—how much RAM to allocate, what OS to install, and what subnet

to assign it to—were all captured in a transparent way, rather than needing us to

decide each time we created a new server. The “spin” command was simple enough

to use in scripts and tools that trigger actions, such as our CI server, so it worked well

as part of automated processes.

Over time, we moved the information about the server types and environments into

configuration files, called servers.yml and environments.yml, respectively. This meant

we needed to change the script itself less often. We only needed to make sure it was

installed on the workstations or servers that needed to run it. Our focus was then on

putting the right things into the configuration file, and treating those as artifacts to

track, test, and promote.

Interestingly, by changing our scripts to make use of configuration files like

servers.yml and environments.yml, we were moving toward declarative definitions.

Defining Infrastructure Declaratively

Splitting definitions into their own files encourages moving away from needing to

think about provisioning procedurally, such as “first do X, then do Y.” Instead, defi‐

nition files can be declarative, such as “should be Z.”

52 | Chapter 3: Infrastructure Definition Tools

Procedural languages are useful for tasks where it’s important to understand how

something should be done. Declarative definitions are useful when it’s more impor‐

tant to understand what you want. The logic of how it is done becomes the responsi‐

bility of the tool that reads the definition and applies it.

Declarative definitions are nicely suited to infrastructure configuration. You can

specify how you would like things to be: the packages that should be installed, user

accounts that should be defined, and files that should exist. The tool then makes the

system match your specification.

You don’t need to worry about the state of the system before the tool runs. The file

may not exist. Or maybe it exists, but has a different owner or permissions. The tool

includes all of the logic to figure out what changes need to be made, and what to leave

alone.

So declarative definitions lend themselves to running idempotently. You can safely

apply your definitions over and over again, without thinking about it too much. If

something is changed to a system outside of the tool, applying the definition will

bring it back into line, eliminating sources of configuration drift. When you need to

make a change, you simply modify the definition, and then let the tooling work out

what to do.

Example 3-4 shows a declarative Terraform configuration file that could be used

instead of my earlier procedural spin script to create web servers. The definition uses

a variable named environment to set the subnet for the servers.

Example 3-4. Terraform configuration file

variable "environment" {

type = "string"

}

variable "subnets" {

type = "map"

default = {

qa = "subnet-12345678"

stage = "subnet-abcdabcd"

prod = "subnet-a1b2c3d4"

}

}

resource "aws_instance" "web" {

instance_type = "t2.micro"

ami = "ami-87654321"

subnet_id = "${lookup(var.subnets, var.environment)}"

}

Working with Infrastructure Definition Tools | 53

The difference between this definition and the spin script is what happens when you

run it multiple times with the same arguments. If you run the spin script five times

specifying the same environment and the web server role, it will create five identical

web servers. If you apply the Terraform definition five times, it will only create one

web server.

Using Infrastructure Definition Tools

Most infrastructure definition tools use a command-line tool to apply a configuration

definition. For example, if the example Terraform definition was saved to a file called

web_server.tf, the command-line tool to create or update it would be run using a

command like this:

# terraform apply -var environment=qa web_server.tf

Infrastructure team members can run the tool from their local workstations or lap‐

tops, but it’s better to have it run unattended. Running the tool interactively is handy

for testing changes to the infrastructure, by applying it to a personal sandbox instance

of the infrastructure. But the definition file should then be committed to the VCS,

and a CI or CD server agent should automatically apply and test the updated configu‐

ration to relevant environments. See Chapter 12 for more details on this.

Configuring Servers

An infrastructure definition tool will create servers but isn’t responsible for what’s on

the server itself. So the definition tool declares that there are two web servers, but

does not install the web server software or configuration files onto them. The next

chapter covers tools and approaches for configuring servers.3

But the infrastructure definition tool often needs to pass configuration information

to a server configuration tool when creating a server. For example, it may specify the

server’s role so the configuration tool installs the relevant software and configuration.

It may pass network configuration details such as DNS server addresses.

Example 3-5 runs Chef on the newly created web server. The run_list argument

specifies the Chef role to apply, which Chef uses to run a certain set of cookbooks.

The attributes_json argument passes configuration parameters to Chef in the

JSON format that it prefers. In this case, it is passing an array with two IP addresses

for the DNS servers. One of the Chef cookbooks that is run will presumably use these

parameters to build the server’s /etc/resolv.conf file.

3 In practice, some tools, such as Ansible, can fill the role of defining infrastructure and also define the contents

of the server. But in this book, I’m describing these responsibilities separately.

54 | Chapter 3: Infrastructure Definition Tools

Example 3-5. Passing configuration to Chef from Terraform

resource "aws_instance" "web" {

instance_type = "t2.micro"

ami = "ami-87654321"

provisioner "chef" {

run_list = [ "role::web_server" ]

attributes_json = {

"dns_servers": [

"192.168.100.2",

"192.168.101.2"

]

}

}

}

Another way to provide configuration information to servers is through a configura‐

tion registry.

Configuration Registries

A configuration registry is a directory of information about the elements of an infra‐

structure. It provides a means for scripts, tools, applications, and services to find the

information they need in order to manage and integrate with infrastructure. This is

particularly useful with dynamic infrastructure because this information changes

continuously as elements are added and removed.

For example, the registry could hold a list of the application servers in a load bal‐

anced pool. The infrastructure definition tool would add new servers to the registry

when it creates them and remove them when the servers are destroyed. One tool

might use this information to ensure the VIP configuration in the load balancer is up

to date. Another might keep the monitoring server configuration up to date with the

list of these servers.

There are different ways to implement a configuration registry. For simpler infra‐

structures, the configuration definition files used by the definition tool may be

enough. When the tool is run, it has all of the information it needs within the config‐

uration definitions. However, this doesn’t scale very well. As the number of things

managed by the definition files grows, having to apply them all at once can become a

bottleneck for making changes.

There are many configuration registry products. Some examples include Zookeeper,

Consul, and etcd. Many server configuration tool vendors provide their own configu‐

ration registry—for example, Chef Server, PuppetDB, and Ansible Tower. These

products are designed to integrate easily with the configuration tool itself, and often

with other elements such as a dashboard.

Configuration Registries | 55

In order to work well with a dynamic infrastructure, the configuration registry ser‐

vice must support programmatically adding, updating, and removing entries from

the registry.

Lightweight Configuration Registries

Rather than using a configuration registry server, many teams implement a light‐

weight configuration registry using files stored in a central, shared location, such as

an object store like an AWS S3 bucket or a VCS. The files can then be made available

using off-the-shelf static web hosting tools.

A variation of this is packaging configuration settings into system packages, such as

a .deb or .rpm file, and pushing them to an internal APT or YUM repository. The

settings can then be pulled to local servers using the normal package management

tools.

These lightweight approaches for implementing a configuration registry take advan‐

tage of mature, off-the-shelf tooling, such as web servers and package management

repositories. These are simple to manage, fault tolerant, and easy to scale. Registry

files can be versioned in a VCS and then distributed, cached, and promoted following

infrastructure as code practices. There may be some complexity in handling frequent

updates from large infrastructures, but these can often be managed by splitting or

sharding registry files.

Pitfall: Tight Coupling with the Configuration Registry

A heavily used registry can become a source of tight coupling and/or brittleness. It

can be unclear which scripts and services depend on a given entry in the registry.

Changing the format of an entry, or removing ones that no longer seem necessary,

can cause unexpected breakages. This in turn leads to hesitation to make changes to

the registry, until it grows into a fragile, overly complicated mess.

For example, I once had a provisioning script add entries for web servers to the regis‐

try under the key /environments/${environment}/web-servers/${servername}.

This was used by another script that configured load balancers to add and remove

web servers from a VIP so that it matched the entries under this key. Later

on, I changed these scripts to use a key under an entry for each server,

like: /servers/${servername}/environment=${environment} and /servers/${serv

ername}/pool=web-servers. I changed the load balancer configuration script to use

this structure, and I changed the provisioning script to put an entry there, no longer

creating the original key.

What I hadn’t known was that a colleague had written a script to automatically

update monitoring checks for web servers, using the original key structure. After I

made my change, because the old registry keys no longer existed, the web server

56 | Chapter 3: Infrastructure Definition Tools

monitoring checks were automatically removed. None of us noticed the problem at

first, as the monitoring checks simply disappeared. It was over a week later that some‐

one noticed the missing checks, and it took nearly a day to investigate to figure out

what had happened.

Good design and communication can help to avoid this kind of problem. Automated

testing can help as well. Some variation of consumer-driven contract (CDC) testing

(as described in “Practice: Run Consumer-Driven Contract (CDC) Tests” on page 255)

could have helped here. People who write scripts that make use of the registry could

write simple tests that raise an alert when registry structures and formats they rely on

have changed.

Is a Configuration Registry a CMDB?

The concept of a configuration management database (CMDB) pre-dates the rise of

automated, dynamic infrastructure. A CMDB is a database of IT assets, referred to as

configuration items (CI), and relationships between those assets. It is many ways sim‐

ilar to a configuration registry: they’re both databases listing the stuff in an infra‐

structure.

But a CMDB and a configuration registry are used to address two different core prob‐

lems. Although they handle overlapping concerns, they do it in very different ways.

For these reasons, it’s worth discussing them as separate things.

A configuration registry is designed to allow automation tools to share data about

things in the infrastructure so that they can dynamically modify their configuration

based on the current state of things. It needs a programmable API, and the infra‐

structure team should use it in a way that guarantees it is always an accurate repre‐

sentation of the state of the infrastructure.

CMDBs were originally created to track IT assets. What hardware, devices, and soft‐

ware licenses do you own, where are they used, and what are they used for? In my

distant youth, I built a CMDB with a spreadsheet and later moved it into a Microsoft

Access database. We managed the data by hand, and this was fine because it was the

iron age, when everything was built by hand, and things didn’t change very often.

So these are the two different directions that configuration registries and CMDBs

come from: sharing data to support automation, and recording information about

assets.

But in practice, CMDB products, especially those sold by commercial vendors, do

more than just track assets. They can also discover and track details about the soft‐

ware and configuration of things in an infrastructure, to make sure that everything is

consistent and up to date. They even use automation to do this.

Configuration Registries | 57

An advanced CMDB can continuously scan your network, discover new and

unknown devices, and automatically add them to its database. It can log into servers

or have agents installed on them, so it can inventory everything on every server. It

will flag issues like software that needs to be patched, user accounts that should not

be installed, and out-of-date configuration files.

So a CMDB aims to address the same concerns as infrastructure as code, and they

even use automation to do it. However, their approach is fundamentally different.

The CMDB Audit and Fix Antipattern

The CMDB approach to ensuring infrastructure is consistent and compliant is reac‐

tive. It emphasizes reporting which elements of the infrastructure have been incor‐

rectly or inconsistently configured so that they can be corrected. This assumes

infrastructure will be routinely misconfigured, which is common with manually

driven processes.

The problem is that resolving these inconsistencies adds a constant stream of work

for the team. Every time a server is created or changed, new work items are added to

fix them. This is obviously wasteful and tedious.

The Infrastructure-as-Code Approach to CMDB

The infrastructure-as-code approach is to ensure that all servers are provisioned con‐

sistently to start with. Team members should not be making ad hoc decisions when

they provision a new server, or when they change an existing server. Everything

should be driven through the automation. If a server needs to be built differently,

then the automation should be changed to capture the difference.

This doesn’t address 100% of the concerns addressed by a CMDB, although it does

simplify what a CMDB needs to do. Here are some guidelines for handling CMDB

concerns when managing an infrastructure as code:

• Make sure everything is built by automation and so is recorded correctly and

accurately.

• If you need to track assets, consider using a separate database for this and have

your automation update it. This should be kept very simple.

• Your automation should accurately record and report your use of commercial

software licenses in the configuration registry. A process can report on license

usage, and alert when you are out of compliance, or when you have too many

unused licenses.

58 | Chapter 3: Infrastructure Definition Tools

• Use scanning to find and report on things that were not built and configured by

your automation. Then either remove them (if they don’t belong) or else add

them to the automation and rebuild them correctly.

For example, you can have scripts that use your infrastructure provider API to list all

resources (all servers, storage, network configurations, etc.) and compare this with

your configuration registry. This will catch errors in your configuration (e.g., things

not being added correctly to the registry), as well as things being done outside the

proper channels.

Conclusion

Defining infrastructure as code is the basis for managing infrastructure so that

changes can be made routinely, safely, and reliably.

This chapter has discussed the types of tools to manage high-level infrastructure

according to the principles and practices of infrastructure as code. Later, Chapter 9

will build on the concepts described in this chapter to suggest patterns and techni‐

ques for designing and organizing infrastructure at a high level, using the types of

tools described in this chapter. But the next chapter will continue exploring tooling,

moving down to tools for configuring servers.

Conclusion | 59

CHAPTER 4

Server Configuration Tools

Using scripts and automation to create, provision, and update servers is not espe‐

cially new, but a new generation of tools has emerged over the past decade or so.

CFEngine, Puppet, Chef, Ansible, and others define this category of tooling. Virtuali‐

zation and cloud has driven the popularity of these tools by making it easy to create

large numbers of new server instances which then need to be configured and upda‐

ted.

Containerization tools such as Docker have emerged even more recently as a method

for packaging, distributing, and running applications and processes. Containers bun‐

dle elements of the operating system with the application, which has implications for

the way that servers are provisioned and updated.

As mentioned in the previous chapter, not all tools are designed to treat infrastruc‐

ture as code. The guidelines from that chapter for selecting tools apply equally well to

server configuration tools; they should be scriptable, run unattended, and use exter‐

nalized configuration.

This chapter describes how server automation tools designed for infrastructure as

code work. This includes different approaches that tools can take and different

approaches that teams can use to implement these tools for their own infrastructure.

Patterns for Managing Servers

Several of the chapters in Part II build on the material covered in

this chapter. Chapter 6 discusses general patterns and approaches

for provisioning servers, Chapter 7 explores ways of managing

server templates in more depth, and then Chapter 8 discusses pat‐

terns for managing changes to servers.

61

Goals for Automated Server Management

Using infrastructure as code to manage server configuration should result in the

following:

• A new server can be completely provisioned1 on demand, without waiting more

than a few minutes.

• A new server can be completely provisioned without human involvement—for

example, in response to events.

• When a server configuration change is defined, it is applied to servers without

human involvement.

• Each change is applied to all the servers it is relevant to, and is reflected in all new

servers provisioned after the change has been made.

• The processes for provisioning and for applying changes to servers are repeata‐

ble, consistent, self-documented, and transparent.

• It is easy and safe to make changes to the processes used to provision servers and

change their configuration.

• Automated tests are run every time a change is made to a server configuration

definition, and to any process involved in provisioning and modifying servers.

• Changes to configuration, and changes to the processes that carry out tasks on an

infrastructure, are versioned and applied to different environments, in order to

support controlled testing and staged release strategies.

Tools for Different Server Management Functions

In order to understand server management tooling, it can be helpful to think about

the lifecycle of a server as having several phases (shown in Figure 4-1).

Figure 4-1. A server’s lifecycle

1 See Definition of “Provisioning” in Chapter 3 for clarity on how I use the term in this book.

62 | Chapter 4: Server Configuration Tools

This lifecycle will be the basis for discussing different server management patterns,

starting in Chapter 6.

This section will explore the tools involved in this lifecycle. There are several func‐

tions, some of which apply to more than one lifecycle phase. The functions discussed

in this section are creating servers, configuring servers, packaging templates, and

running commands on servers.

Tools for Creating Servers

A new server is created by the dynamic infrastructure platform using an infrastruc‐

ture definition tool, as described in the previous chapter. The server is created from a

server template, which is a base image of some kind. This might be in a VM image

format specific to the infrastructure platform (e.g., an AWS AMI image or VMware

VM template), or it could be an OS installation disk image from a vendor (e.g., an

ISO image of the Red Hat installation DVD). Most infrastructure platforms allow

servers to be created interactively with a UI, as in Figure 4-2. But any important

server should be created automatically.

Figure 4-2. AWS web console for creating a new server

There are many use cases where new servers are created:

• A member of the infrastructure team needs to build a new server of a standard

type—for example, adding a new file server to a cluster. They change an infra‐

structure definition file to specify the new server.

• A user wants to set up a new instance of a standard application—for example, a

bug-tracking application. They use a self-service portal, which builds an applica‐

tion server with the bug-tracking software installed.

• A web server VM crashes because of a hardware issue. The monitoring service

detects the failure and triggers the creation of a new VM to replace it.

Tools for Different Server Management Functions | 63

• User traffic grows beyond the capacity of the existing application server pool, so

the infrastructure platform’s autoscaling functionality creates new application

servers and adds them to the pool to meet the demand.

• A developer commits a change to the software they are working on. The CI soft‐

ware (e.g., Jenkins or GoCD) automatically provisions an application server in a

test environment with the new build of the software so it can run an automated

test suite against it.

Tools for Configuring Servers

Ansible, CFEngine, Chef, Puppet, and Saltstack are examples of tools specifically

designed for configuring servers with an infrastructure-as-code approach. They use

externalized configuration definition files, with a DSL designed for server configura‐

tion. The tool reads the definitions from these files and applies the relevant configu‐

ration to a server.

Many server configuration tools use an agent installed on each server. The agent runs

periodically, pulling the latest definitions from a central repository and applying

them to the server. This is how both Chef and Puppet are designed to work in their

default use case.2

Other tools use a push model, where a central server triggers updates to managed

servers. Ansible uses this model by default, using SSH keys to connect to server and

run commands.3 This has the advantage of not requiring managed servers to have

configuration agents installed on them, but arguably sacrifices security. Chapter 8

discusses these models in more detail.

2 It is perfectly possible to use Chef or Puppet in a pull model, for example, by having a central server run an

ssh command to connect to servers and run the client command-line tool.

3 Although Ansible’s main use case is the push model, it can also be run in a pull model, as described in a blog

post by Jan-Piet Mens.

64 | Chapter 4: Server Configuration Tools

Security Trade-Offs with Automated Server Configuration Models

A centralized system that controls how all of your servers are con‐

figured creates a wonderful opportunity for evil-doers. Push-based

configuration opens ports on your servers, which an attacker can

potentially use to connect. An attacker might impersonate the con‐

figuration master and feed the target server configuration defini‐

tions that will open the server up for malicious use. It could even

allow an attacker to execute arbitrary commands. Cryptographic

keys are normally used to prevent this, but this requires robust key

management.

A pull model simplifies security, but of course there are still oppor‐

tunities for evil. The attack vector in this case is wherever the client

pulls its configuration definitions from. If an attacker can compro‐

mise the repository of definitions, then they can gain complete

control of the managed servers.

In any case, the VCS used to store scripts and definitions is a criti‐

cal part of your infrastructure’s attack surface, and so must be part

of your security strategy. The same is true if you use a CI or CD

server to implement a change management pipeline, as described

in Chapter 12.

Security concerns with infrastructure as code are discussed in more

detail in “Security” on page 298.

Server configuration products have wider toolchains beyond basic server configura‐

tion. Most have repository servers to manage configuration definitions—for example,

Chef Server, Puppetmaster, and Ansible Tower. These may have additional function‐

ality, providing configuration registries, CMDBs, and dashboards. Chapter 5 dis‐

cusses broader infrastructure orchestration services of this type.

Arguably, choosing a vendor that provides an all-in-one ecosystem of tools simplifies

things for an infrastructure team. However, it’s useful if elements of the ecosystem

can be swapped out for different tools so the team can choose the best pieces that fit

their needs.

Tools for Packaging Server Templates

In many cases, new servers can be built using off-the-shelf server template images.

Infrastructure platforms, such as IaaS clouds, often provide template images for com‐

mon operating systems. Many also offer libraries of templates built by vendors and

third parties, who may provide images that have been preinstalled and configured for

particular purposes, such as application servers.

Tools for Different Server Management Functions | 65

But many infrastructure teams find it useful to build their own server templates. They

can pre-configure them with their team’s preferred tools, software, and configura‐

tion.

Packaging common elements onto a template makes it faster to provision new

servers. Some teams take this further by creating server templates for particular roles

such as web servers and application servers. Chapter 7 discusses trade-offs and pat‐

terns around baking server elements into templates versus adding them when creat‐

ing servers (“Provisioning Servers Using Templates” on page 118).

One of the key trade-offs is that, as more elements are managed by packaging them

into server templates, the templates need to be updated more often. This then

requires more sophisticated processes and tooling to build and manage templates.

Unikernel Server Templates

A server template is normally built by starting a server with an

existing template or OS image, customizing its contents, then stor‐

ing it as a server image. However, a Unikernel is an OS image that

is custom-compiled with the application it will run. The image only

includes the parts of the OS kernel needed for the application, so is

small and fast. This image is run directly as a VM or container (see

later in this chapter) but has a single address space.

Netflix pioneered approaches for building server templates with everything pre-

packaged. They open sourced the tool they created for building AMI templates an

AWS, Aminator. 4

Aminator is fairly specific to Netflix’s needs, limited to building CentOS/Red Hat

servers for the AWS cloud. But HashiCorp has released the open source Packer tool,

which supports a variety of operating systems as well as different cloud and virtuali‐

zation platforms. Packer defines server templates using a file format that is designed

following the principles of infrastructure as code.

Different patterns and practices for building server templates using these kinds of

tools are covered in detail in Chapter 7.

Tools for Running Commands on Servers

Tools for running commands remotely across multiple machines can be helpful for

teams managing many servers. Remote command execution tools like MCollective,

Fabric, and Capistrano can be used for ad hoc tasks such as investigating and fixing

4 Netflix described their approach to using AMI templates in this blog post.

66 | Chapter 4: Server Configuration Tools

problems, or they can be scripted to automate routine activities. Example 4-1 shows

an example of an MCollective command.

Some people refer to this kind of tool as “SSH-in-a-loop.” Many of them do use SSH

to connect to target machines, so this isn’t completely inaccurate. But they typically

have more advanced features as well, to make it easier to script them, to define

groupings of servers to run commands on, or to integrate with other tools.

Although it is useful to be able to run ad hoc commands interactively across servers,

this should only be done for exceptional situations. Manually running a remote com‐

mand tool to make changes to servers isn’t reproducible, so isn’t a good practice for

infrastructure as code.

Example 4-1. Sample MCollective command

$ mco service httpd restart -S "environment=staging and /apache/"

If people find themselves routinely using interactive tools, they should consider how

to automate the tasks they’re using them for. The ideal is to put it into a configura‐

tion definition if appropriate. Tasks that don’t make sense to run unattended can be

scripted in the language offered by the team’s preferred remote command tool.

The danger of using scripting languages with these tools is that over time they can

grow into a complicated mess. Their scripting languages are designed for fairly small

scripts and lack features to help manage larger codebases in a clean way, such as reus‐

able, shareable modules. Server configuration tools are designed to support larger

codebases, so they are more appropriate.

General Scripting Languages

The usefulness of specialized tools for server configuration doesn’t mean there’s no

role for general-purpose scripting languages. Every infrastructure team I’ve known

needs to write custom scripts. There are always ad hoc tasks that need a bit of logic,

like a script that scrapes information from different servers to find out which ones

need a particular patch. There are little tools and utilities to make life easier, as well as

plug-ins and extensions to standard tools.

It’s important for an infrastructure team to build up and continuously improve their

skills with scripting. Learn new languages, learn better techniques, learn new libraries

and frameworks. Not only does this help you make tools for yourselves, it also ena‐

bles you to dig into the code of open source tools to understand how they work, fix

bugs, and make improvements you can contribute to improve the tools for everyone.

Many teams tend to focus on a particular language, even standardizing on one for

building tools. There’s a balance to keep with this. On the one hand, it’s good to build

Tools for Different Server Management Functions | 67

up deep expertise in a language, and to ensure that everyone on the team can under‐

stand, maintain, and improve in-house tools and scripts.

But on the other hand, broadening your expertise means you have more options to

apply to a given problem: one language may be better at working with text and data,

and another may have a more powerful library for working with your cloud vendor

API. A more polyglot5 team is able to work more deeply with a wider variety of tools.

I prefer to maintain a balance, having one or two “go-to” languages, but being open

to experiment with new ones.

I like the way John Allspaw of Etsy put it in an interview, “We want to prefer a small

number of well-known tools.” Although Allspaw is specifically talking about databa‐

ses at that point of the interview, he is describing the Etsy team’s approach to diver‐

sity versus standardization of tools and technologies.

The pitfall is having tools written in a variety of languages that nobody really under‐

stands well. When these underpin core services in the infrastructure, they become

snowflake scripts that people are afraid to touch, in which case it’s time to rewrite

them in one of the team’s core languages.

It should go without saying by now that all of the scripts, tools, utilities, and libraries

the team develops should be managed in a version control system.

Using Configuration from a Central Registry

Chapter 3 described using a configuration registry to manage information about dif‐

ferent elements of an infrastructure. Server configuration definitions can read values

from a configuration registry in order to set parameters (as described in “Reusability

with Configuration Definitions” on page 49).

For example, a team running VMs in several data centers may want to configure

monitoring agent software on each VM to connect to a monitoring server running in

the same data center. The team is running Chef, so they add these attributes to the

Chef server as shown in Example 4-2.

Example 4-2. Using Chef server attributes as configuration registration entries

default['monitoring']['servers']['sydney'] = 'monitoring.au.myco'

default['monitoring']['servers']['dublin'] = 'monitoring.eu.myco'

When a new VM is created, it is given a registry field called data_center, which is set

to dublin or sydney.

5 Neal Ford coined the term “polyglot programming.” See this interview with Neal for more about it.

68 | Chapter 4: Server Configuration Tools

When the chef-client runs on a VM, it runs the recipe in Example 4-3 to configure

the monitoring agent.

Example 4-3. Using configuration registry entries in a Chef recipe

my_datacenter = node['data_center']

template '/etc/monitoring/agent.conf' do

owner 'root'

group 'root'

mode 0644

variables(

:monitoring_server => node['monitoring']['servers'][my_datacenter]

)

end

The Chef recipe retrieves values from the Chef server configuration registry with the

node['attribute_name'] syntax. In this case, after putting the name of the data cen‐

ter into the variable my_datacenter, that variable is then used to retrieve the moni‐

toring server’s IP address for that data center. This address is then passed to the

template (not shown here) used to create the monitoring agent configuration file.

Server Change Management Models

Dynamic infrastructure and containerization are leading people to experiment with

different approaches for server change management. There are several different mod‐

els for managing changes to servers, some traditional, some new and controversial.

These models are the basis for Part II of this book, particularly Chapter 8, which digs

into specific patterns and practices.

Ad Hoc Change Management

Ad hoc change management makes changes to servers only when a specific change is

needed. This was the traditional approach before the automated server configuration

tools became mainstream, and is still the most commonly used approach. It is vulner‐

able to configuration drift, snowflakes, and all of the evils described in Chapter 1.

Configuration Synchronization

Configuration synchronization repeatedly applies configuration definitions to

servers, for example, by running a Puppet or Chef agent on an hourly schedule. This

ensures that any changes to parts of the system managed by these definitions are kept

in line. Configuration synchronization is the mainstream approach for infrastructure

as code, and most server configuration tools are designed with this approach in mind.

The main limitation of this approach is that many areas of a server are left unman‐

aged, leaving them vulnerable to configuration drift.

Server Change Management Models | 69

Immutable Infrastructure

Immutable infrastructure makes configuration changes by completely replacing

servers. Changes are made by building new server templates, and then rebuilding rel‐

evant servers using those templates. This increases predictability, as there is little var‐

iance between servers as tested, and servers in production. It requires sophistication

in server template management.

Containerized Services

Containerized services works by packaging applications and services in lightweight

containers (as popularized by Docker). This reduces coupling between server config‐

uration and the things that run on the servers. So host servers tend to be very simple,

with a lower rate of change. One of the other change management models still needs

to be applied to these hosts, but their implementation becomes much simpler and

easier to maintain. Most effort and attention goes into packaging, testing, distribut‐

ing, and orchestrating the services and applications, but this follows something simi‐

lar to the immutable infrastructure model, which again is simpler than managing the

configuration of full-blown virtual machines and servers.

Containers

Containerization systems such as Docker, Rocket, Warden, and Windows Containers

have emerged as an alternative way to install and run applications on servers. A con‐

tainer system is used to define and package a runtime environment for a process into

a container image. It can then distribute, create, and run instances of that image. A

container uses operating system features to isolate the processes, networking, and

filesystem of the container, so it appears to be its own, self-contained server environ‐

ment.

The value of a containerization system is that it provides a standard format for con‐

tainer images and tools for building, distributing, and running those images. Before

Docker, teams could isolate running processes using the same operating system fea‐

tures, but Docker and similar tools make the process much simpler.

The benefits of containerization include:

• Decoupling the runtime requirements of specific applications from the host

server that the container runs on

• Repeatably create consistent runtime environments by having a container image

that can be distributed and run on any host server that supports the runtime

70 | Chapter 4: Server Configuration Tools

• Defining containers as code (e.g.,in a Dockerfile) that can be managed in a VCS,

used to trigger automated testing, and generally having all of the characteristics

for infrastructure as code

Not All Containers Are Docker

Docker has popularized the concept of lightweight containers and stolen the lion’s

share of attention. However, there are several other container implementations avail‐

able as of early 2016. These include:

• CoreOS rkt

• CloudFoundry Warden from Pivotal

• Virtuozzo OpenVZ from Odin

• lmctfy from Google, which has been discontinued and merged into libcontainer,

which is used by Docker6

• Bonneville from VMware

The benefits of decoupling runtime requirements from the host system are particu‐

larly powerful for infrastructure management. It creates a clean separation of con‐

cerns between infrastructure and applications. The host system only needs to have

the container runtime software installed, and then it can run nearly any container

image. 7 Applications, services, and jobs are packaged into containers along with all of

their dependencies, as shown in Figure 4-3. These dependencies can include operat‐

ing system packages, language runtimes, libraries, and system files. Different contain‐

ers may have different, even conflicting dependencies, but still run on the same host

without issues. Changes to the dependencies can be made without any changes to the

host system.

6 The pace of change in containerization is currently quite fast. In the course of writing this book, I’ve had to

expand coverage from a couple of paragraphs, to a section, and made it one of the main models for managing

server configuration. Many of the details I’ve described will have changed by the time you read this. But hope‐

fully the general concepts, particularly how containers relate to infrastructure-as-code principles and practi‐

ces, will still be relevant.

7 There is actually some dependency between the host and container. In particular, container instances use the

Linux kernel of the host system, so a given image could potentially behave differently, or even fail, when run

on different versions of the kernel.

Containers | 71

Figure 4-3. Isolating packages and libraries in containers

Managing Ruby Applications with and without Containers

For example, suppose a team runs many Ruby applications. Without containers, the

server they run on might need to have multiple versions of the Ruby runtime

installed. If one application requires an upgrade, the upgrade needs to be rolled out to

any server where the application needs to run.

This could impact other Ruby applications. Those other applications might start run‐

ning with the newer Ruby version, but may have incompatibilities. Two applications

that use the same version of Ruby might use different versions of a library that has

been installed as a system gem (a Ruby shared library package). Although both ver‐

sions of the gem can be installed, making sure each application uses the right version

is tricky.

These issues are manageable, but it requires the people configuring the servers and

applications to be aware of each requirement and potential conflict and do some

work to make everything play nicely. And each new conflict tends to pop up and

interrupt people from working on other tasks.

With Docker containers, each of these Ruby applications has its own Dockerfile,

which specifies the Ruby version and which gems to bundle into the container image.

These images can be deployed and run on a host system that doesn’t need to have any

version of Ruby installed. Each Ruby application has its own runtime environment

and can be replaced and upgraded with different dependencies, regardless of the oth‐

ers applications running on the same host.

Example 4-4 is a Dockerfile that packages a Ruby Sinatra application.

72 | Chapter 4: Server Configuration Tools

Example 4-4. Dockerfile to create a Ruby Sinatra application

# Start with a CentOS docker image

FROM centos:6.4

# Directory of the Sinatra app

ADD . /app

# Install Sinatra

RUN cd /app ; gem install sinatra

# Open the Sinatra port

EXPOSE 4567

# Run the app

CMD ["ruby", "/app/hi.rb"]

Are Containers Virtual Machines?

Containers are sometimes described as being a type of virtual machine. There are

similarities, in that they give multiple processes running on a single host server the

illusion that they are each running in their own, separate servers. But there are signif‐

icant technical differences. The use case of a container is quite different from that of a

virtual machine.

The differences between virtual machines and containers

A host server runs virtual machines using a hypervisor, such as VMware ESX or Xen

(which underlies Amazon’s EC2 service). A hypervisor is typically installed on the

bare metal of the hardware host server, as the operating system. However, some vir‐

tualization packages can be installed on top of another operating system, especially

those like VMware Workstation and VirtualBox, which are intended to run on desk‐

tops.

A hypervisor provides emulated hardware to a VM. Each VM can have different

emulated hardware from the host server, and different hardware from one another.

Consider a physical server running the Xen hypervisor, with two different VMs. One

VM can have an emulated SCSI hard drive, 2 CPUs, and 8 GB of RAM. The other can

be given an emulated IDE hard drive, 1 CPU, and 2 GB of RAM. Because the abstrac‐

tion is at the hardware level, each VM can have a completely different OS installed;

for example, you can install CentOS Linux on one, and Windows Server on the other,

and run them side by side on the same physical server.

Figure 4-4 shows the relationship between virtual machines and containers. Contain‐

ers are not virtual servers in this sense. They don’t have emulated hardware, and they

use the same operating system as their host server, actually running on the same ker‐

nel. The system uses operating system features to segregate processes, filesystems,

Containers | 73

and networking, giving a process running in a container the illusion that it is running

on its own. But this is an illusion created by restricting what the process can see, not

by emulating hardware resources.

Container instances share the operating system kernel of their host system, so they

can’t run a different OS. Containers can, however, run different distributions of the

same OS—for example, CentOS Linux on one and Ubuntu Linux on another. This is

because a Linux distribution is just a different set of files and processes. But these

instances would still share the same Linux kernel.

Figure 4-4. Containers and virtual machines

Sharing the OS kernel means a container has less overhead than a hardware virtual

machine. A container image can be much smaller than a VM image, because it

doesn’t need to include the entire OS. It can start up in seconds, as it doesn’t need to

boot a kernel from scratch. And it consumes fewer system resources, because it

doesn’t need to run its own kernel. So a given host can run more container processes

than full VMs.

Using Containers Rather than Virtual Machines

A naive approach to containers is to build them the same way that you would build a

virtual machine image. Multiple processes, services, and agents could all be packaged

into a single container and then run the same way you would run a VM. But this

misses the sweet spot for containers.

The best way to think of a container is as a method to package a service, application,

or job. It’s an RPM on steroids, taking the application and adding in its dependencies,

as well as providing a standard way for its host system to manage its runtime

environment.

74 | Chapter 4: Server Configuration Tools

Rather than a single container running multiple processes, aim for multiple contain‐

ers, each running one process. These processes then become independent, loosely

coupled entities. This makes containers a nice match for microservice application

architectures.8

A container built with this philosophy can start up extremely quickly. This is useful

for long-running service processes, because it makes it easy to deploy, redeploy,

migrate, and upgrade them routinely. But quick startup also makes containers well

suited for processes run as jobs. A script can be packaged as a container image with

everything it needs to run, and then executed on one or many machines in parallel.

Containers are the next step in the evolution of managing resources across an infra‐

structure efficiently. Virtualization was one step, allowing you to add and remove

VMs to scale your capacity to your load on a timescale of minutes. Containers take

this to the next level, allowing you to scale your capacity up and down on a timescale

of seconds. 9

Running Containers

Packaging and running a single application in a container is fairly simple. Using con‐

tainers as a routine way to run applications, services, and jobs across multiple host

servers is more complicated. Container orchestration systems automate the distribu‐

tion and execution of containers across host systems (Chapter 5 touches on container

orchestration in a bit more detail, in “Container Orchestration Tools” on page 92).

Containerization has the potential to create a clean separation between layers of

infrastructure and the services and applications that run on it. Host servers that run

containers can be kept very simple, without needing to be tailored to the require‐

ments of specific applications, and without imposing constraints on the applications

beyond those imposed by containerization and supporting services like logging and

monitoring.

So the infrastructure that runs containers consists of generic container hosts. These

can be stripped down to a bare minimum, including only the minimum toolsets to

run containers, and potentially a few agents for monitoring and other administrative

tasks. This simplifies management of these hosts, as they change less often and have

fewer things that can break or need updating. It also reduces the surface area for

security exploits.

8 See my colleague Sam Newman’s book Building Microservices (O’Reilly) for more on microservices.

9 The folks at force12 are doing interesting things with microscaling.

Containers | 75

Minimal OS Distributions

Container-savvy vendors are offering stripped down OS distribu‐

tions for running container hosts, such as Red Hat Atomic, Cor‐

eOS, Microsoft Nano, RancherOS, Ubuntu Snappy, and VMware

Photon.

Note that these stripped-down OSes are not the same as the earlier

mentioned Unikernel. A stripped-down OS combines a full OS

kernel with a stripped-down distribution of preinstalled packages

and services. A Unikernel actually strips down the OS kernel itself,

building one up from a set of libraries and including the applica‐

tion in the kernel’s memory space.

Some teams run container hosts as virtual machines on a hypervisor, which is in turn

installed on hardware. Others take the next step and remove the hypervisor layer

entirely, running the host OS directly on hardware. Which of these approaches to use

depends on the context.

Teams that already have hypervisor-based virtualization and infrastructure clouds,

but don’t have much bare-metal automation, will tend to run containers on VMs.

This is especially appropriate when the team is still exploring and expanding their use

of containers, and particularly when there are many services and applications run‐

ning outside of containers. This is likely to be the case for many organizations for

some time.

When containerization becomes more routine for an organization, and when signifi‐

cant parts of their services are containerized, teams will probably want to test how

well running containers directly on hardware-based hosts. This is likely to become

easier as virtualization and cloud platform vendors build support for running con‐

tainers directly into their hypervisors.

Security and Containers

One concern that is inevitably raised when discussing containers is security. The iso‐

lation that containers provide can lead people to assume they offer more inherent

security than they actually do. And the model that Docker provides for conveniently

building customer containers on top of images from community libraries can open

serious vulnerabilities if it isn’t managed with care. 10

10 The folks at Docker have published an article on container security that offers a number of useful insights.

76 | Chapter 4: Server Configuration Tools

Container isolation and security

While containers isolate processes running on a host from one another, this isolation

is not impossible to break. Different container implementations have different

strengths and weaknesses. When using containers, a team should be sure to fully

understand how the technology works, and where its vulnerabilities may lie.

Teams should be particularly cautious with untrusted code. Containers appear to

offer a safe way to run arbitrary code from people outside the organization. For

example, a company running hosted software might offer customers the ability to

upload and run code on the hosted platform, as a plug-in or extension model. The

assumption is that, because the customer’s code runs in a container, an attacker won’t

be able to take advantage of this to gain access to other customers’ data, or to the soft‐

ware company’s systems.

However, this is a dangerous assumption. Organizations running potentially untrus‐

ted code should thoroughly analyze their technology stack and its potential vulnera‐

bilities. Many companies that offer hosted containers actually keep each customer’s

containers isolated to their own physical servers (not just hypervisor-based virtual

machines running the container host). As of late 2015, this is true of the hosted con‐

tainer services run by both Amazon and Google.

So teams should use stronger isolation between containers running untrusted code

than the isolation provided by the containerization stack. They should also take

measures to harden the host systems, all the way down to the metal. This is another

good reason to strip down the host OS to only the minimum needed to run the con‐

tainerization system. Platform services should ideally be partitioned onto different

physical infrastructure from that used to run untrusted code.

Even organizations that don’t run arbitrary code from outsiders should take appro‐

priate care to ensure the segregation of code, rather than assuming containers pro‐

vide fully protected runtime environments. This can make it more difficult for an

attacker who compromises one part of the system from leveraging it to widen their

access.

Container image provenance

Even when outsiders can’t directly run code in containers on your infrastructure,

they may be able to do so indirectly. It’s common for insiders to download outside

code and then package and run it. This is not unique to containers. As will be dis‐

cussed in “Provenance of Packages” on page 299 in Chapter 14, it’s common to auto‐

matically download and install system packages and language libraries from

community repositories.

Containers | 77

Docker and other containerization systems offer the ability to layer container images.

Rather than having to take an OS installation image and build a complete container

from scratch, you can use common images that have a basic OS install already. Other

images offer prepackaged applications such as web servers, application servers, and

monitoring agents. Many OS and application vendors are offering this as a distribu‐

tion mechanism.

A container image for an OS distribution like CentOS, for example, may be main‐

tained by people with deep knowledge of that OS. The maintainers can make sure the

image is optimized, tuned, and hardened. They can also make sure updated images

are always made available with the latest security patches. Ideally, these maintainers

are able to invest more time and expertise in maintaining the CentOS image than the

people on an infrastructure team that is supporting a variety of systems, servers, and

software. Spreading this model out over the various pieces of software used by the

infrastructure team means the team is able to leverage a great deal of industry

expertise.

The risk is when there aren’t sufficient guarantees of the provenance of container

base images used in a team’s infrastructure. An image published on a public reposi‐

tory may be maintained by responsible, honest experts, or it could have been put

there by evil hackers or the NSA. Even if the maintainers are well intentioned, some‐

one evil could have compromised their work, adding subtle back doors.

While community-provided container images aren’t inherently less trustworthy than

community-provided RPMs or RubyGems, their growing popularity emphasizes the

need to manage all of these things carefully. Teams should ensure the provenance of

each image used within the infrastructure is well known, trusted, and can be verified

and traced. Containerization tool vendors are building mechanisms to automatically

validate the provenance of images.11 Teams should ensure that they understand how

these mechanisms work and that they are being properly used.

Conclusion

The intention of this chapter was to understand several different high-level models

for managing individual servers and how these models relate to the types of tooling

available. Hopefully it will help you consider how your team could go about provi‐

sioning and configuring servers.

11 See “Introducing Docker Content Trust”.

78 | Chapter 4: Server Configuration Tools

However, before selecting specific tools, it would be a good idea to be familiar with

the patterns in Part II of this book. Those chapters provide more detail on specific

patterns and practices for provisioning servers, building server templates, and updat‐

ing running servers.

The next chapter will look at the bigger picture of the infrastructure, exploring the

types of tools that are needed to run the infrastructure as a whole.

Conclusion | 79

CHAPTER 5

General Infrastructure Services

The previous chapters described tools to provide, provision, and configure core infra‐

structure resources: compute, networking, and storage. These provide the basic

building blocks for infrastructure as code. However, most infrastructures will need a

variety of other supporting services and tools.

A comprehensive list of these services and tools would be ridiculously large and

would probably go out of date before I could finish typing it. Some are needed for the

infrastructure itself to function—for example, DNS and monitoring. Others, such as

message queues and databases, are required for at least some applications.

The purpose of this chapter isn’t to list or explain these services and tools. Instead, it

is intended to explain how they should work in the context of a dynamic infrastruc‐

ture managed as code. This is the subject of the first section of this chapter.

Four key services are then used to illustrate these considerations and because they are

particularly valuable in this kind of environment. The services and tools addressed

are monitoring, service discovery, distributed process management, and software

deployment.

Considerations for Infrastructure Services and Tools

The goals for any service or system that is involved in managing infrastructure are

the same as those described for the infrastructure platform, definition tool, and server

configuration tool in previous chapters.

The principles of infrastructure as code for services can be summarized as:

• The service can be easily rebuilt or reproduced.

• The elements of the service are disposable.

81

• The infrastructure elements managed by the service are disposable.

• The infrastructure elements managed by the service are always changing.

• Instances of the service are configured consistently.

• Processes for managing and using the service are repeatable.

• Routine requests are fulfilled quickly, with little effort, preferably through self-

service or automatically.

• Complex changes can be made easily and safely.

Some of the specific practices include:

• Use externalized definition files.

• Self-document systems and processes.

• Version all the things.

• Continuously test systems and processes.

• Make small changes rather than batches of them.

• Keep services available continuously.

The previous chapters warned against products that don’t naturally support infra‐

structure as code. Unfortunately, many general infrastructure tools don’t work well

with dynamic infrastructure, or lend themselves to configuration as code. 1

The issue is that most products for monitoring, software deployment, and other serv‐

ices have been around since before virtualization was mainstream, much less cloud.

So they tend to be built around assumptions that aren’t true with dynamic infrastruc‐

ture.

Issues with legacy infrastructure management software products include:

• Doesn’t automatically handle infrastructure elements being added and removed.

• Assumes the product will itself be installed on static servers.

• Requires manual configuration, often driven through a UI.

• Doesn’t make it easy to replicate configuration, and changes to configuration,

across different instances of the product.

• Difficult to automatically test changes to configuration.

1 This often seems to be inversely related to the price tag of the tool. The more expensive tools tend to have

been written in the pre-cloud days. Some of these vendors have struggled to adapt their tools to the new

model of infrastructure management. I suspect most are aware of the need to change, but like many of their

customers, find it difficult to rebuild established codebases and business models as quickly as they would like.

82 | Chapter 5: General Infrastructure Services

The following are criteria for selecting infrastructure service products. These build on

criteria described in earlier chapters.

Prefer Tools with Externalized Configuration

As with server and infrastructure management tools, externalized definition files can

be managed in a VCS, tested and progressed through a pipeline, and can be automat‐

ically replicated and rebuilt as needed.

A closed-box tool that can only be configured through a GUI, and possibly an API,

risks becoming a snowflake service. A snowflake service that has been handcrafted

over time is fragile: difficult to manage and easy to break.

Automating Black Box Configuration

Sometimes a black box tool’s configuration can be exported and

imported by unattended scripts. This might make it possible to

integrate the tool with infrastructure as code, although it will be

clumsy. It’s certainly not recommended for a core infrastructure

tool, but could be useful for a specialized tool that doesn’t have a

good alternative.

This model has some limitations. It’s often difficult to merge

changes from different dumps. This means different team mem‐

bers can’t work on changes to different parts of the configuration

at the same time. People must be careful about making changes to

downstream instances of the tool, to avoid conflicts with work

being done upstream.

Depending on the format of the configuration dump, it may not be

very transparent in that it may not be easy to tell at a glance the

differences between one version and the next.

Another way to approach black box configuration is by injecting

configuration automatically. Ideally this would be done using an

API provided by the tool. However, I have seen it done by auto‐

mating interaction with the tool’s UI—for example, using scripted

tools to make HTTP requests and post forms. This tends to be brit‐

tle, however, because the UI might change. A properly supported

API will keep backward compatibility and so is more reliable.

The configuration injection approach allows configuration to be

defined in external files. These may simply be scripts, or could

involve a configuration format or DSL. If a tool is configured by

automated injection from external files, then this should be the

only way configuration changes are made. Changes made through

the UI are likely to cause conflicts and inconsistencies.

Considerations for Infrastructure Services and Tools | 83

Prefer Tools That Assume Infrastructure Is Dynamic

Many older infrastructure management products struggle to cope gracefully with a

dynamic infrastructure. They were designed in the iron age of infrastructure, when

the set of servers was static. In the cloud age, servers are continuously added and

removed, often by unattended processes. A tool that needs someone to point and

click on a GUI interface every time a new server is added is a liability.

Here are some useful criteria for considering tooling for dynamic infrastructure:

• Ability to gracefully handle infrastructure elements being added and removed,

including entire environments

• Support aggregating and viewing historical data across devices, including those

that have been removed or replaced by different devices

• Ability to make changes automatically in response to events, without human

intervention

• Exposes information about current state and configuration automatically

Many infrastructure services, such as monitoring, need to know the state of servers or

other elements of the infrastructure. It should be possible to add, update, and remove

infrastructure elements from these services automatically—for example, through a

RESTful API.

Prefer Products with Cloud-Compatible Licensing

Licensing can make dynamic infrastructure difficult with some products. Some

examples of licensing approaches that work poorly include:

• A manual process to register each new instance, agent, node, etc., for licensing.

Clearly, this defeats automated provisioning. If a product’s license does require

registering infrastructure elements, there needs to be an automatable process for

adding and removing them.

• Inflexible licensing periods. Some products require customers to buy a fixed set

of licenses for a long period. For example, a monitoring tool may have licensing

based on the maximum number of nodes that can be monitored. The licenses

may need to be purchased on a monthly cycle. This forces the customer to pay

for the maximum number of nodes they might use during a given month, even

when they only run that number of nodes for a fraction of the time. This cloud-

unfriendly pricing model discourages customers from taking advantage of the

ability to scale capacity up and down with demand. Vendors pricing for cloud

charge by the hour at most.

• Heavyweight purchasing process to increase capacity. This is closely related to

the licensing period. When an organization is hit with an unexpected surge in

84 | Chapter 5: General Infrastructure Services

business, they shouldn’t need to spend days or weeks to purchase the extra

capacity they need to meet the demand. It’s common for vendors to have limits

in place to protect customers against accidentally over-provisioning, but it

should be possible to raise these limits quickly.

Prefer Products That Support Loose Coupling

It is important to ensure that a change can be made to any part of the infrastructure

without requiring widespread changes to other parts. Coupling between parts of the

system increases the scope and risk of changes, which leads to making changes less

often, and with more fear.

This can be as much about how the organization designs and implements their infra‐

structure and management services as about the products themselves. Have strong

design principles to watch for and avoid implementations that cause teams using

infrastructure from interfering with one another. It should be possible for teams to

make changes to their own infrastructure without impacting other teams. It takes vig‐

ilance and good design to prevent tight coupling from becoming an issue. Pay atten‐

tion to the signs that parts of your infrastructure are becoming a bottleneck for

changes, and aggressively redesign them to reduce friction.

Sharing a Service Between Teams

A common challenge is deciding whether or not a single instance of a given service

can be shared between teams using it. Examples of potentially shared services include

monitoring, continuous integration (CI), bug tracking, DNS, and artifact repository.

The key question is whether multiple teams can share a single instance of a given ser‐

vice without conflicts.

For example, one client of mine uses a popular CI server. Most of the configuration

for the server is global across the instance. When one team changes a configuration

setting, or installs a plug-in, their change affects all of the other teams using the same

CI server. This has become a source of conflict, forcing everyone involved to spend

time haggling over their conflicting requirements.

A central group took ownership of the shared CI server’s configuration to prevent it

from being destabilized. But development teams found that centralized control

blocked them from using the CI server to meet their needs. Soon they begin bypass‐

ing the central CI team to set up their own CI servers.

On the other hand, the same organization has few problems sharing a VCS service

and artifact repository between teams. These tools tend to have simpler use cases, and

so it’s easier for teams to configure them for their own needs without conflicting with

other teams.

Sharing a Service Between Teams | 85

Security may also be an issue with shared services. The shared CI server at my client

made people nervous because potentially sensitive information used by one team

may be visible to other teams. For example, the organization’s CI server needed to

store database credentials and provide them to a service when automatically deploy‐

ing it. Many organizations, such as financial institutions, need to limit access to cre‐

dentials such as these, even inside the organization.

Service Instance Templates

For services that don’t cleanly segregate configuration between teams, it’s better for

each team to have a dedicated instance. They can then tailor the instance’s configura‐

tion to their own requirements without impacting other teams. Data, credentials, and

access can be more effectively segregated.

But running multiple instances of a single service runs the risk of configuration drift

for things that should be kept consistent. For example, all of the CI servers may need

to integrate with a common authentication service. And version updates should be

quickly rolled out to all instances when they become available.

Rather than running a single instance, a central team can provide elements that teams

can use to easily build their own instances. This could take the form of a server tem‐

plate and a set of server configuration definitions. They could use Packer to build an

AMI with the CI server preinstalled, with plug-ins configured to use the organiza‐

tion’s LDAP server. The server could include Puppet modules to keep the system and

CI server up to date.

Some questions to consider when deciding whether to share service instances, or sup‐

port multiple instances:

• Do the customizations that teams need impact other teams using the service

instance? If so, multiple instances may be best.

• Can one team’s use of the service impact performance for other teams? If so,

multiple instances can prevent problems.

• Does the service involve executing code provided by individual teams? Does it

effectively isolate the execution environment for this code? (Remember that con‐

tainers and even VMs don’t offer bulletproof isolation between processes!)

• Will the service hold data or credentials that should not be available to all of its

users? How strong are the controls to protect this data?

• Is there a compelling need for teams to share data or content between them? In

this case, shared instances may be a better fit.

86 | Chapter 5: General Infrastructure Services

Monitoring: Alerting, Metrics, and Logging

Monitoring is a broad topic and sometimes means different things to different peo‐

ple. System checks send alerts to wake people up at night to fix problems. Dashboards

show the current status of applications. Other dashboards show graphs of resource

utilization and activity. Databases of events and historical metrics can be searched

and analyzed.

The goal of monitoring is to make the right information visible to the people who

need it, when they need it. This information can be drawn from various parts of the

system, from the core infrastructure, to services, to applications, to business metrics.

Different people need different information in different combinations. And people

need information presented in different ways at different times. When the platform is

running out of compute resource, the infrastructure team needs to know right away.

But they can review trends of compute usage every week or so. A product manager

needs to know immediately if a particular product has run out of inventory because

of a sudden spike in orders. But normally, a daily summary of purchases and reve‐

nues is useful.

Monitoring information comes in two types: state and events. State is concerned with

the current situation, whereas an event records actions or changes.2

Alerting: Tell Me When Something Is Wrong

As mentioned in Chapter 1, the secret ingredient of an antifragile, self-healing infra‐

structure is people. Alerts let people know when their attention is needed to prevent

or recover from a problem.

End-user service is what really matters, so checking that everything is working cor‐

rectly from the user’s point of view is essential. Active checks can log into a service

and carry out key transactions or user journeys. These prove that the end-to-end sys‐

tems are working correctly and giving the correct results to users.

Indirect monitoring alerts when behavior strays outside the normal boundaries.

When business transactions drop by an unusual amount, something may have gone

wrong. It could have been caused by a system failure, a critical external dependency

like a content distribution network (CDN), or a content issue such as malformed

product data.

2 My colleague Peter Gillard-Moss has written an article, “Monitor Don’t Log”, which has excellent advice on a

state-driven approach to designing monitoring.

Monitoring: Alerting, Metrics, and Logging | 87

It’s important to ensure that alerts are relevant. Many teams suffer from an endless

stream of trivial alerts, which teaches them to ignore the alerting system. A noisy

alerting system is useless.

Teams should consider the various types of state and events in their systems and

identify actions needed for each. Information that suggests the service has stopped

working for users, or is likely to stop working soon, should get someone out of bed

immediately. These alerts should be very few, and very easy to recognize.

Some events need human attention but can wait until working hours. Other condi‐

tions might indicate a problem, but only need to be looked at if they become fre‐

quent. For these, consider recording the condition as a metric, making sure the

metric is visible on a dashboard or information radiator. Set alerts to trigger when the

metric goes outside of expected bounds.

For example, it is probably fine that the number of web servers in an autoscaling pool

grows and shrinks throughout the day. But if it flaps wildly, there may be a problem,

or at least it may need to be tuned.

What Is An Information Radiator?

An information radiator, or a communal dashboard, is a highly visible display of

information put up in a team space so everyone can easily see key status information.

Agile software development teams use these to show the status of the build in the CI

and CD pipeline. Operations teams show the status of services. Cross-functional

product teams show both of these, plus indicators of key business metrics.

Information radiators will be ignored unless they show actionable information in a

concise way. A useful rule of thumb is that the radiator should make it immediately

obvious which of two courses of action to take: (a) carry on with routine work, or (b)

shout, stop what you’re doing, and take action. Loads of tiny line graphs showing

memory usage and CPU utilization doesn’t grab anyone’s attention. A large block

that goes red when the database is about to run out of memory does.

As with alerts, an information radiator that always shows red has no value. If a condi‐

tion shown on the radiator isn’t important enough to fix immediately, then remove it.

An alerting system needs to handle dynamic infrastructure correctly. Nobody wants

to be woken up when servers in a cluster are automatically destroyed because usage

levels have dropped. But people probably do want to know when a server fails

because it ran out of memory.

They might not want to be woken up for this, if the automated recovery keeps every‐

thing working for end users. But it should be brought to someone’s attention the next

day so they can check for underlying issues.

88 | Chapter 5: General Infrastructure Services

Even when an event doesn’t warrant an alert, it is useful to record metrics and make

sure unusual fluctuations are made visible to the team. Organizations such as Netflix,

with cloud-based estates numbering in hundreds of servers, find that a certain per‐

centage of instances fail during the course of a day. Their infrastructure replaces

them without any drama. But having a chart that shows the failures makes the team

aware if the number becomes unusually high. For example, a series of failures may be

a sign of problems in one of the cloud provider’s data centers, in which case the team

can shift their resources to other data centers until the problems are resolved.

Metrics: Collect and Analyze Data

Another side of monitoring is collecting data in a database. This kind of data can be

analyzed interactively and automatically included in dashboards, schedule reports,

and information radiators.

This is another area where dynamic infrastructure makes things tricky for legacy

tools. Graphing memory usage on an application server may be useful. But when the

application server is replaced several times a week, the data for one server is less use‐

ful on its own.

It’s useful to aggregate the data for the different application servers that ran a given

application instance, so that graphs and reports can give a continuous picture. This

requires the monitoring tool to automatically tag these servers as being related.

For example, a graph of CPU utilization across a fluctuating pool of application

servers, mapped against the count of the number of servers in the pool, shows how

well auto-scaling managed load.

Some monitoring tools don’t cope properly with servers that have been removed.

They insist on treating the server as critical, cluttering dashboards with red status

indicators. Removing the server from the monitoring system gives a cleaner picture

of the current health but means the data is no longer available for analyzing historical

trends. If you run into a monitoring tool that does this, insist the vendor update it for

the modern era, or replace it.

Log Aggregation and Analysis

IT infrastructures are awash with log files. Networking devices, servers, and utilities

generate logs. Applications write their own log files, and even network devices can

log events to syslog servers. One of the side effects of server sprawl is that it can be

hard to know where to look to dig into problems. Logfiles kept on a virtual server’s

filesystem are lost when the server fails or is automatically destroyed.

Centralized log aggregation is a popular solution for this. Servers and devices are

configured to send logs to a central storage service, such as a syslog server or Log‐

stash. Tools such as Elasticsearch and Kibana can be added to make it easy to search

Monitoring: Alerting, Metrics, and Logging | 89

the aggregated logs, build dashboards based on the activity in them, and raise alerts

when bad things appear in them.

While it’s no doubt useful to make all of this data available for investigation, it’s wise

to think about which events need to be used for alerting and for making key metrics

visible. Log files are often a messy combination of message strings that are (maybe)

meaningful to humans, but difficult for machines to reliably parse, and dumps pro‐

duced by machines that aren’t necessarily meaningful to humans, and probably also

not very easy for machines to parse (stack traces spring to mind). Again, these are

useful to muck around in when troubleshooting an issue, but they’re less useful if you

want to reliably detect and report problems or status. Applications and systems

should be written and configured to generate more structured messages for automa‐

ted consumption.

Service Discovery

Applications and services running in an infrastructure often need to know how to

find other applications and services. For example, a frontend web application may

send requests to a backend service in order to process transactions for users.

This isn’t too difficult in a static environment. Applications may use a known host‐

name for other services, perhaps kept in a configuration file that can be updated as

needed.

But with a dynamic infrastructure where the locations of services and servers are

fluid, a more responsive way of finding services is needed.

A few popular discovery mechanisms are listed in Table 5-1.

Table 5-1. Common service discovery mechanisms

Mechanism

How

Comments

Fixed IP

Decide on fixed IP addresses for

Doesn’t work with hosting platforms that assign addresses

addresses

services—for example, the

automatically. Complicates replacement of a server, especially with

monitoring server is

zero downtime replacement strategies (see “Zero-Downtime

192.168.1.5.

Changes” on page 282). Doesn’t work with resource pools that can

vary in size, such as a pool of web servers. Difficult to change, and

not very flexible. Not recommended.

Hostfile entries Use automated configuration to

Ensuring hostfiles are updated automatically as services change is a

ensure servers have /etc/hosts files

complicated way to solve a problem that DNS solved long ago.

(or equivalent) that map resource

server names to their current IP

addresses.

90 | Chapter 5: General Infrastructure Services

Mechanism

How

Comments

DNS

Use DDNS (Dynamic DNS, Domain

On this plus side, it’s a mature, well-supported solution to the

Name System) servers to map

problem. However, some organizations don’t enable dynamic

service names to their current IP

updates (the first “D” in “DDNS”), which is needed for a dynamically

address.

changing infrastructure. While DNS can support pools of resources, it

doesn’t give the level of control needed for advanced zero

downtime replacement strategies. Doesn’t support tagging or

annotations that can be used to dynamically build configuration

(e.g., to update the configuration for a load balancer with the

current set of active web servers in a pool).

Configuration

Centralized registry for data about

Not directly useful for network-level routing (e.g., what you would

registry

infrastructure elements and services use DNS for), but it works well for dynamically generating

(see “Configuration Registries” on

configuration and generally supplying more detailed information

page 55).

about resources in the infrastructure.

Server-Side Service Discovery Pattern

With server-side service discovery, each service has a load balancer (or load balancer

VIP) that directs requests to a pool of servers hosting the relevant service. As servers

are provisioned, destroyed, or fail, the load balancer is automatically updated.

Client-Side Service Discovery Pattern

With client-side service discovery,3 the current list of servers providing a service are

kept in the service registry. The client is written to look these up in the service regis‐

try and decide which server to use for a given request.

The client-side discovery pattern adds more sophistication (arguably, complexity) to

the client. A variation of this pattern is to run a load balancer for each client applica‐

tion. This way, the client application only needs to send requests to its load balancer,

but the logic for discovering the current server application instances is separated.

Distributed Process Management

Services that scale by running multiple instances create the need to orchestrate those

instances. A simplistic approach is to manually decide where to deploy and run pro‐

cesses. But this is essentially static, requiring effort to adjust capacity and to handle

failures. This approach also doesn’t cope well running on dynamic infrastructure.

3 Chris Richardson of NGINX wrote about these service discovery patterns in “Service Discovery in a Micro‐

services Architecture”.

Distributed Process Management | 91

Orchestrating Processes with Server Roles

One way to manage processes is through server roles. For example, a server with the

role “web server” runs the web server process. When you need to scale up capacity,

you start more servers with this role. When demand drops, you can scale down by

destroying servers. Spinning up web servers in multiple data centers can provide

continuity.

This is a straightforward way to orchestrate server processes and comes naturally

when using a dynamic infrastructure platform. However, it can be heavyweight. Spin‐

ning up an entire server, even a virtual one, can take too long for services that need to

run quickly or have short bursts of demand.

Orchestrating Processes with Containers

Containerization offers a different model for managing server processes. Processes

are packaged so that they can be run on servers that haven’t been specifically built for

the purpose. A pool of generic container hosts can be available to run a variety of dif‐

ferent containerized processes or jobs.

Assigning containerized processes to hosts is flexible and quick. The number of con‐

tainer hosts can be adjusted automatically based on the aggregated demand across

many different types of services. However, this approach requires a scheduler to start

and manage container instances.

Scheduling Short Jobs

Many services and infrastructure management tasks involve running short jobs,

either on demand or on a schedule. Some services include capability to manage these

jobs for themselves. For example, CI servers can distribute jobs across a set of servers

running agent processes. Others rely on operating system schedulers such as Cron.

However, Cron is not designed for distributed jobs. This is another feature that some

container orchestration tools offer.

Container Orchestration Tools

Container orchestration tools have emerged following the rise of containerization

systems like Docker. Most of these run agents on a pool of container hosts and are

able to automatically select hosts to run new container instances, replace failed

instances, and scale numbers of instances up and down. Some tools also handle ser‐

vice discovery, network routing, storage, scheduled jobs, and other capabilities.

As of early 2016, the landscape of available tools is still evolving. Different tools take

different approaches and focus on different aspects of container management. Exam‐

ples include Fleet, Docker Swarm, Kubernetes, Mesos, and Nomad. PaaS (Platform as

92 | Chapter 5: General Infrastructure Services

a Service) products such as CloudFoundry, Deis, and OpenShift can be thought of as

highly opinionated container orchestration tools.

Software Deployment

Most of the software installed on servers provisioned through infrastructure as code

comes either from the OS image or is installed using the package management sys‐

tem. But deploying software developed in-house is often more complicated.

An element may need to be installed across multiple servers, database schemas may

need to be modified, and networking rules may need to be updated. Processes may

need to be stopped and restarted in a certain order to avoid corrupting data or losing

transactions.

In the worst cases, these software deployment processes are too complicated to auto‐

mate. There are a few reasons why this happens:

• The software has been manually deployed from its start. As a system grows over

time without the use of automation, retrofitting automation is extremely difficult

without significant refactoring or even rearchitecting.

• The installation process for different releases of the software involves doing dif‐

ferent things. You might call these “snowflake releases.” The need for compre‐

hensive release notes is a symptom of snowflake releases.

• Releases don’t happen very often. This encourages people to treat each release as

a special occasion, rather than a routine event.

• Environments are not consistent, so deploying to each one is a custom effort.

Deployment to an environment needs special knowledge of how to tweak the

software, its configuration, and the environment’s configuration to make every‐

thing mesh. This is a variation of the snowflake release.

Many teams successfully automate complex deployment processes. Remote com‐

mand execution tools (as described in “Tools for Running Commands on Servers” on

page 66) can be useful for this. However, the best approach is to design and imple‐

ment software and infrastructure to simplify the deployment process.

Deployment Pipeline Software

Chapter 12 discusses automatically promoting application and infrastructure changes

through a series of environments for testing. Most organizations have separate test

and production environments. Many have a series of environments for testing stages,

including things like operational acceptance testing (OAT), QA (for humans to carry

out exploratory testing), system integration testing (SIT), user acceptance testing

(UAT), staging, preproduction, and performance.

Software Deployment | 93

Continuous delivery (CD) software orchestrates the promotion of software and infra‐

structure configuration artifacts through this series of environments. The series of

promotions for a given artifact is called a pipeline, and each point in the pipeline is a

stage. For a each stage, the CD tool triggers the software deployment, or pushes con‐

figuration to make it available to the given environment. It may then trigger automa‐

ted tests, failing the pipeline if the tests fail. Figure 5-1 shows an example of a GoCD

pipeline run.

Figure 5-1. Example of a CD pipeline from GoCD

GoCD is an open source continuous delivery tool developed by ThoughtWorks (dis‐

closure: ThoughtWorks is my employer). Most continuous integration (CI) tools can

also be used or extended to create release pipelines—for example, Jenkins, TeamCity,

and Bamboo.

Packaging Software

The ideal way to deploy in-house software onto servers is to use the same processes

and tooling that are used to install any other software. Packaging software into the

native packaging format for the server— .rpm files, .deb files, Nuget packages, etc.—

simplifies software deployment. These formats support pre- and post-installation

scripting and versioning, and can be distributed with repository systems like APT

and YUM.

Language and platform packaging formats like RubyGems and NodeJS NPMs can

also be suitable, as long as they can handle everything needed to install and configure

the software. This should include things like making sure the software is installed as a

system process, creating directories, and using the correct user accounts and permis‐

sions.

Other language packaging formats, like Java .jar and .war files, don’t do these on their

own, so they need other tooling. Some teams package these inside .deb or .rpm files,

which can also include scripts to carry out installation activities. For example,

94 | Chapter 5: General Infrastructure Services

an .rpm file can include an installation script that deploys a .war file into an applica‐

tion server.

When an application is built into a system package and made available from a reposi‐

tory, deployment is simply a part of the configuration definition for the server. The

following Chef recipe snippet assumes that the version to be deployed has been set in

the configuration registry. The team that this example comes from does this from

their deployment pipeline. The deployment stage in the GoCD server runs a script

that sets the version in the Chef server. This recipe then uses this to install the pack‐

age from a YUM repository:

package "usermanager" do

version node[:app][:version]

action :install

end

Using packages this way can be challenging when orchestration is needed across

servers. For example, installation may involve running a script to make changes to a

database schema. This script could be run by the package installer. But if the package

is installed on multiple servers in a pool, then the schema update may run multiple

times, perhaps concurrently, which can have bad results. Database locking can help—

the first script locks the database, and the others, finding it locked, skip the schema

update.

Deploying Microservices

Microservice architecture4 lends itself particularly well to safe, simple, and reliable

software deployments in larger, more complex environments. The idea of microservi‐

ces is to split the functionality of an application into independently deployable serv‐

ices that communicate with each other over the network. This can improve

reusability and sharing if functionality is cleanly separated and interfaces are clearly

defined.

Individual microservices should be small and simple to deploy. If they are imple‐

mented with loose coupling, changes to one microservice can be deployed without

impacting other services that depend on it. However, a microservices application

architecture requires sophisticated infrastructure management.5 Organizations using

microservices tend to have numerous deployable services, which are built and

deployed frequently. Amazon’s ecommerce site is implemented with over 200 micro‐

4 For more on microservices, see Martin Fowler and James Lewis’ series of posts, and Sam Newman’s excellent

book Building Microservices (O’Reilly). Disclosure/brag: these people are all my colleagues.

5 See “MicroservicePrerequisites” .

Software Deployment | 95

services.6 They typically have dozens or hundreds of deployments to production per

day.

Even smaller organizations with fewer than a dozen microservices will struggle to

maintain and deploy these on a static, snowflake infrastructure. A microservices

architecture not only needs dynamic environments with rigorously consistent config‐

uration—it also needs to be able to roll out changes and improvements to servers

easily and safely.

Conclusion

This chapter has given examples of some of the services and tools that may be needed

to manage a dynamic infrastructure and how they can be implemented and used with

infrastructure as code. There are of course many other services and capabilities that

may be necessary for different teams and their infrastructures. Hopefully the exam‐

ples here make it easy to think about how services you may need can fit into this

approach.

Now that we’ve looked at the foundations and principles of infrastructure as code,

Part II of this book will delve into more detailed patterns and practices for imple‐

menting it, including how to provision and maintain servers.

6 For more on Amazon’s use of microservices, see the article “Amazon Architecture” on HighScalability.com.

96 | Chapter 5: General Infrastructure Services

PART II

Patterns

CHAPTER 6

Patterns for Provisioning Servers

Part I of this book described the tooling involved in creating and configuring infra‐

structure elements. Now Part II will delve into patterns for using these tools.

There is more to an infrastructure than servers, but creating, configuring, and chang‐

ing servers generally takes the most time and energy. So the bulk of Part II focuses on

provisioning and updating servers. However, many of the patterns and approaches

described for servers can also be applied to other infrastructure elements such as net‐

working devices and storage, although they can often be simplified.

The Structure of Part II

There are separate chapters for provisioning servers, managing

server template images, and managing changes to servers. The final

chapter of Part II moves to the higher level, building on the pat‐

terns for server management to describe approaches to managing

multiple infrastructure elements and environments.

As defined in Chapter 3, provisioning is the process of making an element, such as a

server, ready to use. This involves assigning resources to the element, instantiating it,

configuring it, and then registering it with infrastructure services such as monitoring

and DNS. At the end of the provisioning process, the element is ready for use.

An effective provisioning process based on infrastructure as code has the following

characteristics:

• Any existing infrastructure element can be effortlessly rebuilt on demand.

• A new element can be defined once, and then rolled out and replicated to multi‐

ple instances and environments.

99

• The definition of any element, and the process to provision it, is transparent and

easily modified.

This chapter starts by outlining the lifecycle of a server, and then describes a model

for thinking about the various pieces of a server that need to be provisioned. These

are used as the basis for discussing different patterns for provisioning and configura‐

tion, and so are referred to not just in this chapter, but also in later chapters.

Server Provisioning

Typical provisioning tasks for a server include allocating hardware, creating the

server instance, partitioning disks, loading an operating system, installing software,

configuring the parts of the server, setting up networking, and registering the server

with services that are needed to make it fully usable (e.g., DNS).

Server provisioning may be done at different points of a server’s lifecycle. Most sim‐

ply, they can all be done when creating each new physical server or virtual machine

instance. But it may be more efficient to do some provisioning activities up front. For

example, part of the provisioning can be saved onto a server template image, which

can then be used to create multiple servers. Rather than installing the same software

package on every new server as it is created, it can be installed one time. This makes it

faster to create a new server and can help in keeping servers consistent.

Provisioning is not only done for a new server. Sometimes an existing server is re-

provisioned, changing its role from one to another. Or a large server may be used for

multiple roles and occasionally have a new role added. For example, many IT opera‐

tions teams run multiple infrastructure services like DNS, DHCP, file servers, and

mail servers together on shared servers, rather than having a dedicated server for

each role. In this kind of environment, it’s common to shift certain services between

existing machines as needed to balance workloads. 1

A Server’s Life

The server lifecycle was touched on in Chapter 4. The patterns and practices for this

chapter, and the ones following, are based around this lifecycle (shown in Figure 6-1).

1 Running multiple roles on a small number of servers was much more common in “the old days.” Virtualiza‐

tion and automation have made it much easier to build and run services on dedicated servers. This in turn

makes it easier to keep services segregated.

100 | Chapter 6: Patterns for Provisioning Servers

Figure 6-1. A server’s lifecycle

Package a server template

As mentioned, it’s often useful to create a server template image. This is a server

image with common elements already provisioned that can be used to create multiple

servers. Some infrastructure management platforms have direct support for tem‐

plates, such as Amazon’s AMIs and VMware’s Templates. Others, such as Rackspace

cloud, don’t have explicit server templates, but the functionality used to create snap‐

shots for backups can easily be used for templating.

The process of creating a template can start with an operating system image, such as

an OS installation ISO file, or it may start with a previously created template image. A

server instance is started, changes are made to it, and then it is saved to a snapshot of

some kind. This process might be manual, or can be automated, possibly using con‐

figuration management tooling to prepare the template before saving it.

Templates may be very simple, with little more than the base operating system, or

they can be heavier, with everything needed for a particular server role already

installed. The most minimal templating approach is to directly use an OS installation

ISO as a template, creating each new server instance by booting and running the OS

installation process.

Trade-offs of different approaches are discussed later in this chapter, and ways to

implement template packaging are covered in Chapter 7.

Create a new server

Creating a new server involves allocating resources such as CPU, memory, and disk

space, and instantiating a virtual machine or hardware server. This phase also usually

involves configuring networking, including assigning an IP address and placing the

server in the networking architecture—for example, adding it to a subnet. The server

may also be added to infrastructure orchestration services such as DNS, a configura‐

tion registry, or monitoring (see Chapter 5).

Software and configuration may be installed at this point, particularly those needed

for a given role, if they’re not installed in the template. In many cases, updates may be

Server Provisioning | 101

run to apply system updates and security patches released after the server template

used to create the server was built.

Again, different approaches to handling provisioning activities in templates versus

server creation time are discussed in the following sections, as well as in the following

chapters.

Update a server

A good server creation process ensures new servers are consistent when they are cre‐

ated. However, this consistency doesn’t last. Changes may be made to servers over

their lifetime, which can cause them to diverge. And the contents of server templates,

and activities that happen on server creation, tend to be continuously updated and

improved by the infrastructure team, which means that servers created at different

times are likely to be different.

Automated configuration tools such as Ansible, CFEngine, Chef, and Puppet were

created to deal with this problem. Chapter 8 goes into this subject in detail.

Replace a server

Some changes may require completely replacing a server, rather than simply updat‐

ing an existing one. For example, it may not be possible to upgrade a running server

to a major new version of an OS. Even for less dramatic changes, it may be easier to

completely rebuild a server rather than change it, especially when automation can

make rebuilding quicker and more reliable than selectively upgrading parts of it.

Immutable infrastructure is a change management strategy that involves rebuilding a

server for any configuration change.

Replacing servers seamlessly is a key to continuity strategies, ensuring major changes

to infrastructure can happen without interrupting service or losing data. Zero-

downtime replacement ensures that a new server is completely built and tested while

the existing server is still running so it can be hot-swapped into service once ready.

Replacing a server usually requires updating infrastructure services such as DNS and

monitoring. These tools should handle the replacement of a server gracefully, without

interrupting service, and without losing the connection of data for services that run

across the lifespan of multiple servers. Similarly, data may need to be retained across

rebuilds of a server instance.

Zero-downtime changes and data persistence across the server lifecycle are discussed

in more detail in Chapter 14.

102 | Chapter 6: Patterns for Provisioning Servers

Immutable Servers: Replacing Servers Instead of Updating Them

The immutable server pattern mentioned in “Server Change Man‐

agement Models” on page 69 doesn’t make configuration updates

to existing servers. Instead, changes are made by building a new

server with the new configuration.

With immutable servers, configuration is usually baked into the

server template. When the configuration is updated, a new tem‐

plate is packaged. New instances of existing servers are built from

the new template and used to replace the older servers.

This approach treats server templates like software artifacts. Each

build is versioned and tested before being deployed for production

use. This creates a high level of confidence in the consistency of the

server configuration between testing and production. Advocates of

immutable servers view making a change to the configuration of a

production server as bad practice, no better than modifying the

source code of software directly on a production server.

Immutable servers can also simplify configuration management, by

reducing the area of the server that needs to be managed by defini‐

tion files.

Immutable servers are discussed in more detail in Chapter 8 (“Pat‐

terns and Practices for Immutable Servers” on page 143).

Delete a server

Destroying a server may be simple, but infrastructure services need to be updated to

reflect its removal. Data may also need to be retained. It’s useful to make sure that

information about a deleted server is retained after it is deleted. Retaining historical

metrics and log data for deleted servers is essential for debugging problems and

tracking trends.

Other events in a server’s life

The lifecycle phases are the major events for a server, but other interesting events

occur.

Recover from failure. Cloud infrastructure is not necessarily reliable. Some providers,

including AWS, have an explicit policy that server instances may be terminated

without warning—for example, if the underlying hardware needs to be replaced.

Even providers with stronger availability guarantees have hardware failures that

affect hosted systems.

As a rule, a team that has responsibility for managing the lifecycle of server instances

needs to take responsibility for continuity. Infrastructure as code can be used to make

services more reliable than the individual system elements they run on. The “replace‐

Server Provisioning | 103

ment” phase of a server’s lifecycle is about replacing servers while maintaining data

and service continuity. If this can be done easily and routinely, a bit of extra work can

ensure it happens automatically in the face of failure. This is discussed in more detail

in Chapter 14.

Resize a server pool. Being able to easily add and remove servers from a pool, such as

load-balanced web servers or database nodes, is a handy benefit of being able to build

servers repeatably and consistently. Some infrastructure management platforms and

orchestration tools offer functionality to do this automatically. This can be done in

response to changes in demand (e.g., adding web servers when traffic increases and

removing them when it decreases) or on a schedule to match predictable patterns of

demand (e.g., shutting down services overnight).

For many services, it’s useful being able to easily add and remove capacity even if it’s

not automated—for example, if someone can use a UI to quickly add and remove

servers.

Example 6-1 is a Terraform definition that creates a pool of web servers on AWS. The

aws_autoscaling_group defines a pool of 2 to 5 servers. The launch configuration

(not shown in this example) defines how to create a web server for this pool, with an

AMI ID and AWS server type such as “t2.micro”. Also not shown here are the rules

that tell the AWS platform when to automatically add and remove servers from the

pool. As with other platforms, this can be triggered by metrics such as CPU load or

network response times, or by events or a schedule.

Example 6-1. Example of a web server pool configuration

resource "aws_autoscaling_group" "web-server-pool" {

min_size = 2

max_size = 5

launch_configuration = "${aws_launch_configuration.webserver.name}"

}

Reconfigure hardware resources. With many virtualization and cloud platforms, it’s

possible to change the hardware resources provided to a running server instance. For

example, it may be possible to add or remove RAM to a virtual server, or change the

number of CPU cores allocated to it. This can be changed in the infrastructure defini‐

tion and then applied with the infrastructure definition tool (e.g., Terraform, Cloud‐

Formation, or Heat).

However, in some circumstances, the change may require rebooting or even rebuild‐

ing the server instance. This may be because the infrastructure or tooling doesn’t sup‐

port making that type of change to a running instance. In these situations, the change

becomes a server replacement.

104 | Chapter 6: Patterns for Provisioning Servers

A well-implemented server management system will transparently cope with these

changes. This is a natural outcome of reliably rebuilding servers in a consistent way

and handling continuity across changes to dynamic infrastructure elements.

What Goes onto a Server

It’s useful to think about the various things that go onto a server, and where they

come from.

This chapter describes some different models for categorizing the

things that go onto a server, but it’s important to remember that

these kinds of categorizations are never going to be definitive.

They’re fine as far as they are useful to map out approaches to

managing servers. If you find yourself obsessing over the “right”

category for a particular thing from your infrastructure, take a step

back. It probably doesn’t matter.

Types of Things on a Server

One way of thinking of the stuff on a server is as software, configuration, and data

(Table 6-1). This is useful for understanding how configuration management tools

should treat a particular file or set of files.

Table 6-1. Things found on a server

Type of thing Description

How configuration

management treats it

Software

Applications, libraries, and other code. This doesn’t need to be executable

Makes sure it’s the same on

files; it could be pretty much any files that are static and don’t tend to vary

every relevant server; doesn’t

from one system to another. An example of this is timezone data files on a

care what’s inside

Linux system.

Configuration Files used to control how the system and/or applications work. The contents

Makes sure it has the right

may vary between servers, based on their roles, environments, instances, and contents on every relevant

so on. This category is for files managed as part of the infrastructure, rather

server; will make sure it’s

than configuration managed by applications themselves. For example, if an

consistent and correct.

application has a UI for managing user profiles, the data files that store the

user profiles wouldn’t be considered configuration from the infrastructure’s

point of view; instead, this would be data. But an application configuration

file that is stored on the filesystem and would be managed by the

infrastructure would be considered configuration in this sense.

Data

Files generated and updated by the system, applications, and so on. It may

Naturally occuring and

change frequently. The infrastructure may have some responsibility for this

changing; may need to

data (e.g., distributing it, backing it up, replicating it, etc.). But the

preserve it, but won’t try to

infrastructure will normally treat the contents of the files as a black box, not

manage what’s inside.

caring about what’s in the files. Database data files and logs files are

examples of data in this sense.

Server Provisioning | 105

The key difference between configuration and data is whether automation tools will

automatically manage what’s inside the file. So even though some infrastructure tools

do care about what’s in system logfiles, they’re normally treated as data files. When

building a new server, you don’t expect your provisioning tools to create logfiles and

populate them with specific data.

Data is treated as a black box by configuration management. Data that you care about

needs to be managed so that it survives what happens to a server. Provisioning a

server may involve making sure that the appropriate data is made available—for

example, mounting a disk volume or configuring database software so that it repli‐

cates data from other instances in a cluster.

Quite a lot of system and application configuration will be treated as data by automa‐

ted configuration management. An application may have configuration files that

specify network ports and other things that the configuration system will define. But

it may also have things like user accounts and preferences that get stored in other

files. Automated configuration will treat these as data because their contents aren’t

defined by configuration definitions.

Where things come from

The elements of a given server instance may come from different sources:

Base operating system

Typically comes originally from an installation image: CD, DVD, or ISO. Often

there are optional system components that may be chosen during the OS setup

process.

System package repositories

Most modern Linux distributions support automatically downloading packages

from a centralized repository (e.g., RHN/YUM repositories of RPM packages for

Red Hat–based distributions, APT repositories of .deb packages for Debian-

based distributions). Repositories may be hosted or mirrored internally, and/or

public repositories may be used. You may add packages not available in the main

public repositories.

Language, framework, and other platform repositories

Many languages and frameworks these days have library formats and repositories

to make them available (e.g., RubyGems, Java Maven repositories, Python PyPi,

Perl CPAN, NodeJS npm, etc.). The principle is the same as the system package

repositories.

Third-party packages

Things not available in public repositories (e.g., commercial software). May be

managed by putting them into internal, private repos.

106 | Chapter 6: Patterns for Provisioning Servers

In-house software packages

Again, may be put into internal repos. In many cases, these are handled sepa‐

rately—for example, deployment tooling pushes a build onto servers.

It’s often best to install third-party and in-house packages from an internal repository

so they can be managed and tracked consistently. Some operations teams like to use

version control repositories like Git and Perforce to manage these, although some

tools are better than others at storing large binary files.

Some teams install these packages manually. In some cases, this can be pragmatic,

especially in the short term while automation is still being implemented. However, it

obviously doesn’t support the principles discussed in this book, such as repeatability.

Another option for distributing packages to servers is within the definition files of a

configuration tool. Puppet, Chef, and Ansible all allow files to be bundled with mod‐

ules, cookbooks, and playbooks. Although this is more repeatable than manual instal‐

lation, they tend to make configuration definitions unwieldy, so this is really only

suitable for a stopgap until a private artifact repository of some sort can be installed.

Caching to Optimize Provisioning

Building servers or templates typically involves downloading soft‐

ware packages and updates. Downloading these from public repo‐

sitories can take quite a while, often becoming the longest part of

the process, and use significant network bandwidth.

Making these files available closer to where templates and servers

are built can speed things up dramatically. Ways to do this can

include keeping a local repository mirror or caching proxy. Things

that can be cached this way include OS installation images, package

repositories (APT, YUM, RubyGems, Maven, npm, etc.), and static

data files.

As with any performance optimization, take the time to measure

the different parts of the process before spending time and effort to

optimize it, not to mention adding complexity to your infrastruc‐

ture.

Server Roles

Different servers will need different things installed on them depending on what they

will be used for, which is where the concept of roles comes in. Puppet calls these

classes, but the idea is the same. In many models for server roles, a particular server

can have multiple roles.

One pattern is to define fine-grained roles, and combine these to compose particular

servers. For example, one server might be composed of the roles TomcatServer,

Server Provisioning | 107

MonitoringAgent, BackupAgent, and DevelopmentServer, with each of these roles

defining software and/or configuration to be applied.

Another pattern is to have a role-inheritance hierarchy. The base role would have the

software and configuration common to all servers, such as a monitoring agent, com‐

mon user accounts, and common configuration like DNS and NTP server settings.

Other roles would add more things on top of this, possibly at several levels.

Figure 6-2 illustrates the relationships between roles with inheritance.

Figure 6-2. Example of a simple hierarchy of server templates

It can still be useful to have servers with multiple roles even with the role inheritance

pattern. For example, although production deployments may have separate web, app,

and db servers, for development and some test cases, it can be pragmatic to combine

these onto a single server.

Different teams will prefer different patterns and strategies for organizing roles. The

important thing is how easy the structure is for the team to understand and work

with. If the structure becomes awkward and messy, it may be time to reconsider and

restructure it.

Patterns for Creating Servers

Most infrastructure management platforms, whether they’re a public cloud like AWS

or a virtualization product like VMware, can create servers either from a user inter‐

face like a web UI or admin application, or by using a programmable API.

Once a new server image has been launched, there are typically changes made on the

server itself, which may include installing and configuring software as well as system

108 | Chapter 6: Patterns for Provisioning Servers

updates and configuration. Orchestration activities integrate the new server into net‐

work and infrastructure services such as DNS.

The source for launching a new server instance might be:

• Cloning an existing server

• Instantiating from a snapshot that was saved earlier from a running server

• Building from a specially prepared server template such as an EC2 AMI

• Booting directly from an OS installation image such as an ISO file from an OS

vendor

Antipattern: Handcrafted Server

The most straightforward way to create a new server is to use an interactive UI or

command-line tool to specify each of the options needed. This is usually the first

thing I do when learning how to use a new cloud or virtualization platform. Even

when I’ve been using a platform for a while and have more sophisticated scripting

options available, it’s still sometimes useful to use the basic tools to whip up a new

VM to try out something new, or to help with debugging a problem by testing differ‐

ent things about how the creation process works.

Example 6-2 uses the AWS command-line tool to create a new server.

Example 6-2. Running a command manually to create a server

$ aws ec2 run-instances \

--image-id ami-12345678 \

--region eu-west-1 \

--instance-type t2.micro \

--key-name MyKeyPair

But a manual process is not a sustainable way to routinely create servers.

Manually creating a server relies on someone deciding, for each new server, which

options to choose. This is clearly not repeatable, at least not easily and reliably. Even

if the same person creates another server later on, he may not remember exactly

which options he chose the first time, and a different person is even more likely to

configure the server at least a little differently than the first person did. It may be pos‐

sible to refer back to an existing server to figure out the settings that were used, but

this takes time and effort and can still lead to errors.

So manually building servers leads almost immediately to configuration drift and

snowflake servers. Server creation is not traceable, versionable, or testable, and is cer‐

tainly not self-documenting.

Patterns for Creating Servers | 109

Practice: Wrap Server Creation Options in a Script

A script is a simple way to capture the process for creating new servers so that it’s

easily repeatable. Check the script into a VCS to make it transparent, auditable,

reversible, and to open the door to making it testable.

The aws command from the previous example could easily be saved in a shell script

and committed to version control, taking a first step into infrastructure as code.

Avoid Scripts That Need to Be Edited Every Time

I’ve seen more than one experienced system administrator new to

infrastructure as code write a script that creates a server but needs

to be edited every time it’s run to set parameters. This may help

make part of a manual process a bit easier, but it doesn’t really

automate the server creation process.

For all but the simplest situations, a script that creates new servers needs to use differ‐

ent options for different situations. The goal should be that, even though the person

using the script will need to know what she wants, she shouldn’t need to remember

the details of how to make it happen. These details, and the logic of how to assemble

the various options to give the user what she wants, should be captured in the script.

Example 6-3 is a Bash script that creates a web server in AWS using the awscli tool.

Example 6-3. Script that creates a web server

#!/bin/bash

aws ec2 run-instances \

--image-id ami-12345678 \

--count 1 \

--instance-type t2.micro \

--key-name MyKeyPair \

--security-groups open-https-port

This avoids the need for the person creating a web server to remember which options

should be passed. The script could be extended to run a server configuration tool to

bootstrap the server once it becomes available, as mentioned in “Patterns for Boot‐

strapping New Servers” on page 112. Many teams will opt to use an extensible tool

designed for provisioning, such as Chef’s knife command-line tool or Ansible.

But for more complex infrastructure, a declarative infrastructure definition tool (such

as those described in “Working with Infrastructure Definition Tools” on page 50)

provisions servers without the need for special scripts.

110 | Chapter 6: Patterns for Provisioning Servers

Antipattern: Hot Cloned Server

My team and I loved cloning servers when we started using virtualization. Nearly

every new server we needed was a variation of one we already had running, so clon‐

ing was a simple way to create a new server with everything it needs already installed

and configured. But as our infrastructure grew, our team realized that our habit of

cloning servers was one of the reasons we were suffering from server sprawl and con‐

figuration drift.

We found that our servers were wildly different from one another. Whatever differ‐

ences we had on our web servers were made worse every time we picked one of them

—usually the one we thought was most up to date—to create a new server and tweak

its configuration.

We tried declaring a particular server to be the master for all cloning, and kept it in

the ideal state, with all the latest updates. But of course, whenever we updated the

master servers, the servers that we’d created before weren’t updated to match.

A server that has been cloned from a running server is not reproducible. You can’t

create a third server from the same starting point, because both the original and the

new server have moved on: they’ve been in use, so various things on them will have

changed.

Cloned servers also suffer because they have runtime data from the original server.

I recall a colleague who was debugging an unreliable Tomcat server and spent several

days working on a fix based on strange messages he’d found in the server’s logfiles.

The fix didn’t work. Then he realized that the strange messages hadn’t actually been

logged on the server he was trying to fix. That server had been cloned from another

server, and the messages had come from the original, so he had been wasting several

days chasing a red herring.

Pattern: Server Template

Cloning running servers isn’t a good way to build servers consistently, but making a

snapshot of a server and using that as a template can be. The key difference is that the

template is static. Once it is built, it is never run, so it doesn’t accumulate changes or

data.

Two new servers built from a given template always start out identical, even if the

second one is built a week after the first. This is different from cloning from a run‐

ning server, which will have accumulated some changes between the creation of the

first server and the second server a week later.

Of course, even servers created from the same template won’t stay consistent. As they

run, differences will creep in, so you still need strategies to update servers as dis‐

cussed in Chapter 8.

Patterns for Creating Servers | 111

Antipattern: Snowflake Factory

Many organizations adopt automated tools to provision servers, but a person still cre‐

ates each one by running the tool and choosing options for the particular server. This

typically happens when processes that were used for manual server provisioning are

simply carried over to the automated tools. The result is that it may be quicker to

build servers, but that servers are still inconsistent, which can make it difficult to

automate the process of keeping them patched and updated.

Consistency is an issue because humans are involved in applying configuration

options to a new VM. For example, someone looks at the specification to decide

which user accounts to create, which packages to install, and so on. Even when a

company is using an expensive, GUI-driven automation tool (arguably, especially

when it’s using such a tool), it’s common that two different people, even people in the

same IT team, may choose slightly different options. And it’s also entirely likely that

requirements are expressed differently by different user teams. So each VM that

comes out of this process is at least slightly different from other VMs that are used for

very similar purposes.

Patterns for Bootstrapping New Servers

After launching a new server, but before putting it into use, it usually needs to have

changes made to it. These may include installing system updates and setting system

configuration options, installing and configuring software, and/or seeding data onto

the server.

Some teams aggressively minimize the changes that need to be made to a new server

by putting as much as possible into the template image. This streamlines the server

creation process, although it requires more sophistication in template management.

Different patterns for template management will be explored thoroughly in the next

chapter.

But many teams do apply configuration during creation, normally by leveraging the

same server configuration tooling used for making changes to running servers. For

example, if a team runs Ansible, Chef, or Puppet across their server estate, they will

normally run it on each newly built server. This will tailor the server to its role and

ensure it is up to date with the latest package versions.

Running a configuration tool when creating a server requires bootstrapping to be

able to run the tool. There are two main strategies for this: push bootstrapping and

pull bootstrapping.

112 | Chapter 6: Patterns for Provisioning Servers

Pushing to Bootstrap

As discussed in Chapter 4 (“Tools for Configuring Servers” on page 64), some tools

configure servers using a push model. This involves connecting to the new server

over the network from a central server or agent machine, typically using SSH. The

bootstrap process may involve installing the configuration tool or agent, initial con‐

figuration, and potentially generating a key to register the new server as a configura‐

tion client.

Some of this, such as installing the configuration software, can be done on the server

template so that it doesn’t need to be done when bootstrapping the new server. But

server-specific setup still needs to be run. So if this will be done by the tool connect‐

ing into the new server, the server will need to have access credentials preinstalled for

the connection to work.

Having a single set of login credentials with root privileges preinstalled on every new

server may create a security vulnerability. A safer approach is generating a one-off

authentication secret when launching a new server. For example, the AWS EC2 API

supports creating and assigning a unique SSH key to each new server instance as it is

created. Rackspace’s cloud automatically assigns a random strong root password

when creating a server.

So the server creation process can provide the new server’s unique key to the process

that bootstraps the server’s configuration. The bootstrapping process can also involve

locking the new server down further, even disabling keys, passwords, or accounts as

appropriate.

Pushing is also sometimes used for updating servers, which will be discussed in

Chapter 8 (“Pushing to synchronize” on page 138).

Pulling to Bootstrap

Pull bootstrapping works by configuring a server template image with a script that

runs when a new server starts up. The script may download configuration definition

files from a repository, retrieve configuration settings from a central registry, or even

download the latest configuration software package from a file server in order to con‐

figure itself.

Most infrastructure platforms can pass parameters passed by the script or tool that

creates a server. This allows the provisioning process to tell the server its role and

perhaps set certain parameters that the setup script needs to customize the new server

for bootstrapping.

For example, a server may be created from a template that has cloud-init pre-

installed, along with a configuration management tool. The provisioning script

passes a parameter that specifies the role for the new server. The setup script on the

Patterns for Bootstrapping New Servers | 113

server uses this parameter to run the configuration tool for the first time, so that the

software and configuration for the new server’s role is installed on the new server.

Example of pulling to bootstrap

Example 6-4 shows part of an AWS CloudFormation definition file that provisions a

server.

This file would be applied using the aws command-line tool, or from a script using

the AWS REST API. For this example, the command or API call will pass two param‐

eters. The ServerAmi parameter specifies the AMI of the server template to be used.

The ServerRole parameter specifies the role of the server (e.g., web, app, db, etc.).

The “UserData” section of the CloudFormation definition tells cloud-init to execute

the script /usr/local/sbin/server-setup.sh on startup, passing the ServerRole parame‐

ter as an argument. This script will have been baked into the AMI and will use the

argument passed in to configure the server for the appropriate role.

Example 6-4. AWS CloudFormation template that implements push provisioning

"ServerHost" : {

"Type" : "AWS::EC2::Instance",

"Properties" : {

"ImageId" : {

"Ref" : "ServerAmi"

},

"InstanceType" : "t2.small",

"UserData" : {

"Fn::Base64" : {

"Fn::Join" : [ "", [

"#!/bin/bash\n",

"/usr/local/sbin/server-setup.sh ",

{ "Ref" : "ServerRole" }

]

]

}

}

}

Practice: Smoke Test Every New Server Instance

If a server is automatically created, then it can be automatically tested. It’s too com‐

mon to create a new server, hand it over, and only discover there was something

wrong with it after people try to use it.

In an ideal world, automation means you can trust that every new server was built

without flaws. In the real world, automation scripts are written by human beings, so

mistakes are common. Automation scripts are also maintained by human beings, so

114 | Chapter 6: Patterns for Provisioning Servers

even after a script has spun up many perfectly good servers, you can never assume

the next one will also be perfect.

So it’s good sense to sanity check each new server when it’s created. Automated

server smoke testing scripts can check the basic things you expect for all of your

servers, things specific to the server’s role, and general compliance. For example:

• Is the server running and accessible?

• Is the monitoring agent running?

• Has the server appeared in DNS, monitoring, and other network services?

• Are all of the necessary services (web, app, database, etc.) running?

• Are required user accounts in place?

• Are there any ports open that shouldn’t be?

• Are any user accounts enabled that shouldn’t be?

Smoke tests should be triggered automatically. If you rely on a person to manually

run the script, it may be overlooked and become less useful over time. This is where

using a CI or CD server like Jenkins or GoCD to create servers helps, because it can

automatically run these kinds of tests every time.

Smoke tests could be integrated with monitoring systems. Most of the checks that

would go into a smoke test would work great as routine monitoring checks, so the

smoke test could just verify that the new server appears in the monitoring system,

and that all of its checks are green.

Conclusion

This chapter has described approaches and patterns for provisioning servers. The

core theme has been what to provision, and in what parts of the server lifecycle. The

next chapter will go into more detail of managing server templates.

Conclusion | 115

CHAPTER 7

Patterns for Managing Server Templates

This chapter builds on the previous chapters on provisioning and server creation to

discuss ways to manage server templates.

Using server templates can help to build new servers consistently and repeatably.

However, it requires good processes for managing the templates. Templates need to

be built and kept up to date with patches and improvements. The process and tooling

for this should follow the principles of infrastructure as code. Templates themselves

should be built through a repeatable, transparent, self-documenting, and self-testing

process.

Stock Templates: Can’t Someone Else Do It?

The simplest way to manage templates is to let someone else do it. Many OS vendors

and cloud services provide prepackaged, stock templates, like those in Figure 7-1.

These will have a base OS installation, plus default configurations, tools, and user

accounts to make servers ready to use with the hosting provider. For example, the

server template may be configured to use local DNS servers and OS package reposito‐

ries, and may have utilities installed for finding metadata about the hosting environ‐

ment.

Using stock images offloads the hassle and complexity of managing your own tem‐

plates. This can be especially helpful in the early days of setting up and running a new

infrastructure. Over time, the team may want to push provisioning activities from

server creation into the template, and so decide to move to managing their own tem‐

plates to gain more control.

117

Figure 7-1. Examples of stock AMIs available on AWS

It is important to understand where the stock images you use come from, and what

user accounts, software, and security configuration are in place. Make sure the tem‐

plate doesn’t have security issues such as well-known passwords or SSH keys. Even if

you remove them automatically after a new server boots, attackers actively exploit

those brief windows of opportunity.

When using stock server templates, be sure to follow changes and updates to them so

your servers are not left with unpatched bugs or vulnerabilities.

The rest of the patterns and practices in this section assume you will be baking your

own server templates.

Provisioning Servers Using Templates

A natural question is which configuration elements and software packages should be

provisioned in the server template, and which ones should be added when a new

server is created. Different teams will have different approaches to this.

Provisioning at Creation Time

One end of the spectrum is minimizing what’s on the template and doing most of the

provisioning work when a new server is created. New servers always get the latest

changes, including including system patches, software package versions, and configu‐

ration options.

This approach simplifies template management. There will be very few templates,

probably only one for each combination of hardware and OS version used in the

infrastructure—for example, one for 64-bit Windows 2016 and one each for 32-bit

and 64-bit Ubuntu 14.x. The templates don’t need to be updated very often, as there

118 | Chapter 7: Patterns for Managing Server Templates

is little on them that changes; and in any case, updates can be applied when servers

are provisioned.

Reasons to provision at creation time

This is often appropriate when the team isn’t able to invest in sophisticated template

management tooling. Teams can manage and update their templates manually, as

they don’t need to do it very often. Most of the tooling effort goes into configuration

management. A single process and a single set of definitions are used both for provi‐

sioning new servers and for running regular updates on existing servers.

Keeping templates minimal makes sense when there is a lot of variation in what may

be installed on a server. For example, if people create servers by self-service, choosing

from a large menu of configuration options, it makes sense to provision dynamically

when the server is created. Otherwise, the library of prebuilt templates would need to

be huge to include all of the variations that a user might select.

Issues with provisioning at creation time

The main drawback of doing most of the provisioning work every time a new server

is created is that it takes longer to create a new server. Repeating the same activities

for every new server can be wasteful. Downloading a large number of packages and

files every time a new server is created can waste bandwidth.

For infrastructures where automatically creating new servers is a key part of disaster

recovery, automatic scaling, and/or deployment, a heavyweight server creation pro‐

cess means these things take more time. Larger-scale disaster-recovery scenarios can

be especially painful, if provisioning new servers requires waiting for infrastructure

services such as repository servers and configuration servers to be rebuilt first.

Provisioning in the Template

At the other end of the provisioning spectrum is putting nearly everything into the

server template. Building new servers then becomes very quick and simple, just a

matter of selecting a template and applying instance-specific configuration such as

the hostname. This can be useful for infrastructures where new instances need to be

spun up very quickly—for example, to support automated scaling.

More extensive provisioning in the template requires more mature processes and

tools for building templates. 1 Even if there aren’t very many templates, making con‐

figuration changes by building new template versions means building them quite

1 Building templates has become easier in recent years thanks to tools like Packer and Aminator, which were

described in Chapter 4 (“Tools for Packaging Server Templates” on page 65).

Provisioning Servers Using Templates | 119

often. It’s not unusual to build new templates at least weekly, and some teams have

new templates being packaged and rolled out multiple times a day.

Templates and Immutable Servers

Doing all of the significant provisioning in the template, and disal‐

lowing changes to anything other than runtime data after a server

is created, is the key idea of immutable servers. This was discussed

in Chapter 6 (” Immutable Servers: Replacing Servers Instead of

Updating Them“).

With immutable servers, templates are treated like a software arti‐

fact in a continuous delivery pipeline. Any change to a server’s

configuration is made by building a new version of the template.

Each new template version is automatically tested before it is rolled

out to production environments. This ensures that every produc‐

tion server’s configuration has been thoroughly and reliably tested.

There is no opportunity to introduce an untested configuration

change to production.

Template versioning is discussed later in this chapter. Managing

changes through immutable servers is discussed in Chapter 8

(“Patterns and Practices for Immutable Servers” on page 143).

Applying continuous delivery pipelines to infrastructure, including

server templates, is the subject of Chapter 12.

Balancing Provisioning Across Template and Creation

Although it’s possible to go to either extreme—doing all of the provisioning either in

the template building phase or else doing it all when creating a new server—most

teams spread provisioning tasks across both phases. There are several things to take

into account when deciding how to balance the provisioning work.

One consideration is the cycle time2 for making a change available in newly created

servers. A change that involves rebuilding a template will take longer than a change

that is applied when the new server is created.

So it’s a good idea to consider how often different elements of a server change.

Things that change often may be better done at server creation time, while things that

don’t change very often can be put into the template.

2 “Cycle time” is a term used in Lean processes for measuring the end-to-end time for a particular activity. It is

measured for a single work item and starts when the need is identified, and ends when the need has been

fulfilled. Cycle time is a key concept for pipelines, as discussed in Chapter 12 (“Measuring Pipeline Effective‐

ness: Cycle Time” on page 242)

120 | Chapter 7: Patterns for Managing Server Templates

It’s also possible to provision elements in both phases. For example, server configura‐

tion definitions can be used to install packages and configuration when building tem‐

plates, and then run again when creating a new server. When something changes in

the definitions, they will be applied to new servers even if the template still has the

old configuration. Creating new servers will still be quick, because only things that

have changed since the template was built will need to be applied. New template ver‐

sions can be built periodically to roll up the latest changes.

The Process for Building a Server Template

The process for building a template involves:

• Selecting an origin image

• Applying customizations to the image

• Packaging the image into a server template image

Most server templates start from an origin image. This may be a raw OS setup image,

a stock image from a vendor, or a previously created server template. Options for

choosing and managing origin images are discussed in the next section. An exception

to this is when building a Unikernel server template, which involves compiling the

server image. Unikernel templates are discussed later in this chapter.

The most straightforward way to apply customizations is to boot the origin image as

a server instance and then customize that running server. This may include things

like applying system updates, installing common software packages like a monitoring

agent, and standard configurations like DNS and NTP servers. It should also include

hardening the server by removing or disabling unnecessary software, accounts and

services, and applying security policies like local firewall rules.

An alternative to booting the origin image is to mount the origin disk image in

another server and apply changes to its filesystem. This tends to be much faster, but

the customization process may be more complicated. This approach is discussed later

in this chapter.

Once the server is ready, it is “baked,” meaning it is saved into a format that can be

used to create new servers. This will normally be the server image format supported

by the infrastructure platform, such as an Openstack image, AWS AMI, or VMware

server template. On some platforms, such as Rackspace Cloud and Openstack, the

same server image format is used for backing up servers and booting new servers.

Other platforms, including AWS and VMware, have a special version of their server

image format for server templates. This is typically the same format under the covers;

it simply presents and organizes them differently.

The Process for Building a Server Template | 121

Build Templates Repeatably

The infrastructure as code principles of repeatability and consis‐

tency lead to the idea that server templates themselves should be

created in a way that is repeatable so that the servers created from

them are consistent. The following patterns and practices aim to

help with this.

Creating Templates for Multiple Platforms

Some teams run servers on multiple infrastructure platforms. For example, an orga‐

nization may host some servers in AWS and others in a data center using Openstack.

It is useful to make sure that servers in both locations run the same OS versions and

patches, and are consistently configured where appropriate.

Even when hosting only uses a single platform, it’s convenient to be able to run a

consistently built OS image on local virtualization–for example, using Vagrant.

The template building process can be implemented to generate consistent server tem‐

plates for each supported infrastructure platform. Each time a new template version

is built, it should be built for all of the platforms.

Example 7-1 is a snippet from a Packer template. The snippet shows three “builders,”

each of which creates a server template image for a different platform. The first cre‐

ates an AWS AMI, the second creates an Openstack image for a private cloud, and

the third creates a VirtualBox image that can be used with Vagrant.

Example 7-1. Sample Packer template for multiple platforms

{

... (common configuration goes here) ...

"builders" : [

{

"type" : "amazon-ebs",

"access_key" : "abc",

"secret_key" : "xyz",

"region" : "eu-west-1",

"source_ami" : "ami-12345678",

"instance_type" : "t2.micro"

"ami_name": "our-base "

},

{

"type" : "openstack",

"username" : "packer",

"password" : "packer",

"region" : "DFW",

"ssh_username" : "root",

"image_name" : "Our-Base",

"source_image" : "12345678-abcd-fedc-aced-0123456789ab",

122 | Chapter 7: Patterns for Managing Server Templates

"flavor" : "2"

},

{

"type" : "virtualbox-iso",

"guest_os_type" : "Ubuntu_64",

"iso_url" : "http://repo/ubuntu-base-amd64.iso",

"ssh_username" : "packer",

"ssh_password" : "packer"

}

]

}

Origin Images

Server templates are usually built by creating an image from a running server. This

involves starting a server from some kind of origin image, making customizations to

the server, and then snapshotting the server to a new template image. There are sev‐

eral options for the origin image.

Antipattern: Hot Cloned Server Template

As mentioned previously (“Antipattern: Hot Cloned Server” on page 111), you

shouldn’t create a new server by hot cloning a running server. This is also true for

creating server templates.

If you want servers to be reproducible, then you also want templates to be reproduci‐

ble. So the process involved in starting, customizing, and snapshotting a server to

make a template should be completely controlled and reproducible.

Templates should be created from a clean server, one that has never been used for

any other purpose. This way the only history and runtime data on a new server is left

over from the process of setting up the template, not from any kind of production

use.

Baking a Template from an OS Installation Image

An OS installation image, such as ISO file from the OS vendor, provides a clean, con‐

sistent starting point for building a server template. The template building process

starts by booting a server instance from the OS image and running the automated

setup process (such as Red Hat’s Kickstart). The server instance can then be custom‐

ized before saving an image to use as a template.

This tends to be an option for virtualization platforms, but most IaaS cloud platforms

don’t provide an easy way to boot servers directly from an ISO. In these cases, the

most viable option is building from a stock image.

Origin Images | 123

Baking a Template from a Stock Image

As discussed earlier in this chapter, most dynamic infrastructure platforms provide

stock server images that can be used to build servers and customized templates.

These images may be provided by the platform’s vendor, by the OS vendor, or even

by third parties or user communities. Amazon AWS has the AMI marketplace with

server templates built and supported by a variety of vendors.

A stock image can be used directly to create a server, as described earlier. But it’s gen‐

erally preferable to use it as a starting point to build a customized template. Packages

and configurations needed for the team’s own infrastructure can be added.

A vendor’s stock images are often intended to be useful for many needs, so it’s a good

idea to strip out unwanted packages. For example, a number of popular images have

multiple server configuration packages preinstalled—Puppet, Chef, etc.—to make it

easy for different teams to get started with them.

Stripping out unused packages, user accounts, services, and configuration will make

servers more secure. It also reduces their resource footprint, so they take less disk

space and memory to run, and should also reduce the startup time for new servers.

When considering a stock server template, it’s critical to be confident in the prove‐

nance of everything on the template. Be sure that the packages and configuration are

from reliable sources, with strong processes to ensure they are secure, legally licensed,

and safe.

Just Enough Operating System (JEOS)

The just-enough operating system approach, or JEOS, pares the

system image down to the bare essentials. This is mainly intended

for building virtual appliances, containers, and embedded systems,

but for a highly automated infrastructure, it’s a good idea to con‐

sider how far you can strip the OS down.

As mentioned in the discussion of containers in Chapter 4, there

are a number of OS distributions that have been created specifically

to minimize and simplify server installations. Examples include:

• Red Hat Atomic

• CoreOS

• Microsoft Nano

• RancherOS

• Ubuntu Snappy

• VMware Photon

124 | Chapter 7: Patterns for Managing Server Templates

Building a Template from a Unikernel

Unikernels are machine images that are specially built to run a process in a single

address space. Rather than starting a complete OS image and customizing it, the OS

image is compiled together with the application, including the minimal set of OS

libraries needed. This machine image can then be booted as a virtual machine or built

into a container image, such as a Docker image.

Unikernel server templates can bring efficiencies in terms of resource usage, startup

times, and security. As of 2016 Unikernels are new, and the ecosystem of tooling,

knowledge, and practices hasn’t fully developed. So this approach may be more com‐

plex to implement and maintain than the alternatives.

Customizing a Server Template without Booting It

The process of booting the origin server image as a server instance, applying customi‐

zations, and then shutting down the instance to bake the template image can be slow.

An alternative is to use a source image that is mountable as a disk volume—for exam‐

ple, an EBS backed AMI in AWS. A longer-running server can mount a copy of the

origin image as a disk volume and then make customizations to the files on the

image. This may use chroot to make sure that package management tools and other

scripts see the image’s relative paths correctly.

Once the customizations have been made to the disk volume, it is unmounted and

then converted to the relevant server image for use as a server template.

This process is much faster than booting to customize, which makes it particularly

useful for teams who build templates frequently, such as those using immutable

servers.

Another advantage is that there should be little or no pollution of the template server

image from having been booted and run for a short period. For example, booting and

customizing the template will inevitably create system log entries and may leave tem‐

porary files and other cruft.3

The main drawback of this method is that it can be a bit more complex. It may not be

as easy to use the same server configuration tools and definition files that are used for

running servers, at least not without some extra work. And not all infrastructure plat‐

forms provide a way to mount server image volumes onto another server, in which

case this approach may simply not be possible.

3 Cruft is anything that is left over, redundant, and getting in the way.

Origin Images | 125

Tools for Building Server Templates without Booting

Netflix’s Aminator tool builds AWS AMIs by mounting the origin

image as a disk volume. The company’s blog post on Aminator

describes the process quite well. Packer offers the amazon-chroot

builder to support this approach.

Updating Server Templates

Server templates become stale over time as packages fall out of date and configura‐

tion improvements are found. Although patches and updates can be applied each

time a new server is created, it takes longer and longer to do so as time goes on. Regu‐

larly refreshing templates keeps everything running smoothly.

Reheating a Template

One way to refresh a template is to use the previous version of the template as the

origin. Updates and improvements can be applied and saved to a new template ver‐

sion. Often this is as simple as running a subset of the normal server configuration

definitions.

One drawback of this approach is that templates can accumulate cruft. When some‐

thing like a software package is removed from a definition, it isn’t automatically

removed from server templates. Even if it is, there may be leftover files, dependent

packages, or even orphaned user accounts. Ensuring that all of these are removed

from new versions of a template is difficult if it needs to be done explicitly.

Baking a Fresh Template

The other approach for refreshing templates is to rebuild a fresh template from the

same origin as the previous version, such as the OS installation image or the stock

image. If a new version of the origin becomes available (e.g., an OS update), then the

new template can be built using that.

Frequently building fresh templates is easy with a well-automated process. It can also

simplify the configuration that needs to be run, as the origin image is more predicta‐

ble and doesn’t include any cruft from previous template versions.

Versioning Server Templates

It’s important to point out that “updating” a template really means building a new

template image to be used instead of the old one. The old template image should

never be overwritten. The reasons for this are similar to the reasons for using version

control for files: the ability to troubleshoot and roll back if you find problems with

changes, and visibility of what changes were made and when.

126 | Chapter 7: Patterns for Managing Server Templates

Traceability of Server Templates

It should be possible to trace any running server instance back to the template ver‐

sion used to build it. The template version can then be traced back to the origin

image and any scripts and definition files used to build that template.

Figure 7-2 shows a running server named webserver-qa-2.1.2-032. This was built

from the server template named webserver-template-2.1.2. The materials used to

build this template were a Packer template file ( webserver-packer-2.1.json) and an

Ubuntu installation ISO image ( ubuntu-14.04.4-server-amd64.iso).

Figure 7-2. Tracing a running server to the template and its inputs

The benefits of this level of versioning and traceability include:

• Aids debugging problems, because it is easy to see what changes have been made,

who made them, and hopefully why they were made.

• Makes it possible to accurately rebuild any existing server, or even previous ver‐

sions of servers.

• Creates confidence in testing, as it is possible to view the results of the automated

testing that was run against the template version used to create any server.

• Makes it easy to identify which existing servers need to be replaced due to out-of-

date versions.

Implementing template versioning

Some infrastructure platforms, including EC2, directly support tracing instances to

their original image. However, few fully support versioning of server templates, so

teams need to implement at least part of the versioning themselves.

One approach is to store the template version in a tag on the template image, if the

platform supports it. Servers started from the template can also have the template ID

and version stored in tags, to provide traceability.

Updating Server Templates | 127

For platforms that don’t offer tagging, the template version number can be included

in the template name. This might also work to include the template version number

in the server name. For example, a server created from template webserver-

template-2.1.2 could be named webserver-qa-2.1.2-032. The naming convention

for the server includes the template name (“webserver”) as the first field before the

dash. The template version is also included in the server name (“2.1.2”), and then a

unique number for the server is appended with a dash (“-032”).

If neither of this options is viable, the fields could be added to servers in the configu‐

ration registry (assuming you’re using one) or in some other centrally stored location

or log.

Example Naming Convention

On several projects, I have named templates with the format

$\{TEMPLATE_ROLE}-$\{YYYYMMDDHHSS}. The ${TEMPLATE_ROLE} is

the name of the template type, which might be something like

“base”, “centos65”, “dbserver” or something else, depending on

what kinds of templates my team uses. The datestamp string gives

us a unique version number each time we build a new version of

that particular template. When creating a new server, the creation

script will know the template type to use, usually based on the

server role, and will either select the latest version number, or else

choose the appropriate version number based on which template

has been promoted to the relevant stage of the pipeline (see Chap‐

ter 12 for more on promoting templates).

Removing old templates

It’s usually important to clean out older template versions to save storage space.

Teams that update templates frequently (e.g., those using immutable servers) will

find that this consumes massive amounts of storage if they don’t prune them.

A rule of thumb is to keep the templates that were used to create the servers running

in your infrastructure to ensure you can rapidly reproduce the server in a pinch.

128 | Chapter 7: Patterns for Managing Server Templates

Retaining Templates for Legal Reasons

Some organizations have a legal requirement to be able to repro‐

duce, or at least prove the provenance, of their infrastructure, for

some number of years later. Because they use so much storage,

archiving server templates may be a difficult and expensive way to

meet this requirement.

If your templates are built automatically, it may be a viable alterna‐

tive to simply archive the scripts and definitions used to build the

templates, as well as to reference the original third-party images

used to build from.

Check with appropriate auditors and/or experts. Often, the kind of

traceability and regularity that comes with infrastructure as code is

far better for compliance regimes than what most IT organizations

consider “best practice.”

Building Templates for Roles

We’ve discussed the use of server roles in “Server Roles” on page 107. It may be useful

to create a separate server template for each role, with the relevant software and con‐

figuration baked into it. This requires more sophisticated (i.e., automated) processes

for building and managing templates but makes creating servers faster and simpler.

Different server templates may be needed for reasons other than the functional role

of a server. Different operating systems and distributions will each need their own

server template, as will significant versions. For example, a team could have separate

server templates for CentOS 6.5.x, CentOS 7.0.x, Windows Server 2012 R2, and Win‐

dows Server 2016.

In other cases, it could make sense to have server templates tuned for different pur‐

poses. Database server nodes could be built from one template that has been tuned

for high-performance file access, while web servers may be tuned for network I/O

throughput.

Pattern: Layered Template

Teams that have a large number of role-based templates may consider having them

build on one another. For example, a base server template may have the optimiza‐

tions, configuration, and software common to all servers in the infrastructure. The

base template would be used as the origin image to build more specific role-based

templates for web servers, app servers, and the like.

Layered templates fit well, conceptually at least, with a change management pipeline

(see Chapter 12), because changes to the base image can then ripple out to automati‐

cally build the role-specific templates. This is illustrated in Figure 7-3. But although

Building Templates for Roles | 129

this appeals to techie-minded love of structuring and ordering things, in practice it

isn’t always useful. In fact, it can actually make the end-to-end process of making a

change and getting the usable template longer.

Figure 7-3. Multistage process for building layered templates

However, layering can be useful when the base template is updated much less often

than the role templates. For example, a team using the immutable server pattern may

bake each new build of their application into a new template, which can mean build‐

ing templates many times a day when the application is being actively developed.

Building these templates from a base template that already has all of the heavy

changes on it can speed up the application build-and-test cycle.

This is especially helpful when the base template can be built in a way that makes

building role templates much quicker—for example, by stripping it down to a mini‐

mal system so that it boots and bakes very quickly.

Sharing Base Scripts for Templates

One of the motivations for layering is to get consistency when various role templates

share common base elements. However, a more efficient alternative to layering is to

simply share common scripts or configuration definitions that are used to customize

a server before it is baked into a template.

For example, base scripts may install common utilities, a monitoring agent, and com‐

mon configuration settings, as shown in Figure 7-4. Each role template is built com‐

pletely from the stock server image, adding all of the base elements and the role-

specific elements in a single stage.

130 | Chapter 7: Patterns for Managing Server Templates

Figure 7-4. Single-stage process for building templates with shared base scripts

Automating Server Template Management

It’s straightforward to automate the end-to-end process of building a template, from

spinning up a server, applying updates, and then baking the template and making it

available for use. “Tools for Packaging Server Templates” on page 65 in Chapter 4

describes tooling that can be used for building templates.

Customizing Servers Before Baking

Tools like Packer that automate the end-to-end template building process typically

allow you to trigger scripts or configuration management tools to run on the server

to customize it before baking it into a template.

Teams using a server configuration tool like Ansible, Chef, or Puppet for running

servers may prefer to run the same tool to build the template. The tool would run

after the instance has been started from the source instance, running an appropriate

set of configuration definitions before the server is then baked to a template image.

On the other hand, the configuration applied when building a template is often

straightforward enough that a set of simple shell or batch scripts can do the job. This

is especially likely for teams who use immutable servers, as they probably don’t use a

server configuration tool at all.

Full-blown configuration management tools are intended for a more complex use

case: continuously synchronizing configuration on running servers whose state may

change between runs. But configuring a template is a one-off, with a known starting

state: a clean stock image or freshly installed OS.

Automating Server Template Management | 131

Practice: Automatically Test Server Templates

Automatically building templates leads naturally to automatically testing them. Every

time a new template is built, the automation tooling can use it to spin up a new VM,

run tests to make sure it’s correct and compliant, and then mark the template as

ready for use. Scripts that create new servers can then automatically select the newest

template that has passed its tests.

As with any automated testing, it’s important to keep test suites pared down to those

that add real value. The goal is to catch common errors and keep confidence in the

automation. Designing an effective testing regime is the topic of Chapter 11.

Conclusion

This chapter, along with Chapters 5 and 6, has focused on aspects of server provi‐

sioning. The next chapter moves onto ways of keeping servers updated.

132 | Chapter 7: Patterns for Managing Server Templates

CHAPTER 8

Patterns for Updating and

Changing Servers

Dynamic infrastructure makes it easy to create new servers, but keeping them up to

date once they’ve been created is harder. This combination often leads to trouble, in

the shape of a sprawling estate of inconsistent servers. As seen in earlier chapters,

inconsistent servers are difficult to automate, so configuration drift leads to an

unmanageable spaghetti infrastructure.

So a processes for managing changes to servers is essential to a well-managed infra‐

structure. An effective change management process ensures that any new change is

rolled out to all relevant existing servers and applied to newly created servers. All

servers should be up to date with the latest approved packages, patches, and configu‐

ration.

Changes to servers should not be allowed outside the automated process. Unman‐

aged changes lead to configuration drift and make it difficult to quickly and reliably

reproduce a given server. If changes are routinely made by bypassing the automation,

then this is a sign that the processes need to be improved so that they are the easiest

and most natural way for team members to work.

The process for updating servers should be effortless so that it can scale as the num‐

ber of servers grows. Making changes to a server should be a completely unattended

process. A person may initiate a change, for example, by committing a change to a

configuration definition. Someone may also manually approve a change before it is

applied to certain parts of the infrastructure. But the change should roll out to servers

without someone “turning a handle” to make it happen.

Once a well-oiled server change process is in place, changes become fire and forget.

Commit a change, and rely on tests and monitoring to alert the team if a change fails

133

or causes an issue. Problems can be caught and stopped before they’re applied to

important systems, and even those that slip through can be rapidly rolled back or

corrected.

Characteristics of an effective server change process:

• The automated process is the easiest, most natural way for team members to

make changes.

• Changes are rolled out to all of the relevant existing servers.

• Servers that are meant to be similar are not allowed to drift into inconsistency.

• Changes are applied as an unattended process.

• The effort involved in a change is the same, regardless of how many servers are

affected by it.

• Errors changes are made visible quickly.

This chapter drills into the main server change management models that were intro‐

duced in Chapter 4 (“Server Change Management Models” on page 69) and then

describes patterns and practices for implementing them.

Models for Server Change Management

The four models for making configuration changes servers are ad hoc, configuration

synchronization, immutable servers, and containerized servers.

Ad Hoc Change Management

The traditional approach has been to leave servers alone unless a specific change is

required. When a change is needed, someone may edit a file by hand or write a one-

off script to make the change. Many teams who use a configuration management tool

like Chef, Puppet, or Ansible still only run it when they have a particular change to

make.

As discussed throughout this book, this tends to leave servers inconsistently config‐

ured, which in turn makes it difficult to use automation reliably and comprehen‐

sively. In order to run an automated process across many servers, the state of those

servers needs to be generally consistent to start with.

Continuous Configuration Synchronization

Most server configuration tools are designed to be used in a continuous synchroniza‐

tion model. This means that the tool runs on an unattended schedule, usually at least

once an hour. Each time the tool runs, it applies or reapplies the current set of defini‐

134 | Chapter 8: Patterns for Updating and Changing Servers

tions. This ensures that any changes made between runs are brought back into line,

preventing configuration drift.

Continuous synchronization helps to maintain the discipline for a well-automated

infrastructure. The tool will run no matter what, so the team must keep the defini‐

tions working correctly. The shorter the time between configuration runs, the more

quickly issues with the configuration definitions are found. The more quickly issues

are found, the more quickly the team can fix them.

However, writing and maintaining configuration definitions takes work, so there is a

limit to how much of a server’s surface area can be reasonably managed by defini‐

tions. Any areas not explicitly managed by configuration definitions may be changed

outside the tooling, which leaves them vulnerable to configuration drift.

Immutable Servers

The so-called immutable server approach is the practice of making configuration

changes to a server by building an entirely new server, rather than by making changes

to the existing server.1 This ensures that any change can be tested before being put

into production, whereas a change made to running infrastructure could have unex‐

pected effects.

The configuration of a server is baked into the server template, so the contents of a

server are predictable. They are defined by whatever is on the origin image for the

template, combined with the set of script and/or configuration definitions run as a

part of building the template image. The only areas of a server that aren’t predictable,

and tested, are those with runtime states and data.

Immutable servers are still vulnerable to configuration drift, as their configuration

could be modified after they’ve been provisioned. However, the practice is normally

combined with keeping the lifespan of servers short, as with the Phoenix. So servers

are rebuilt as frequently as every day, leaving little opportunity for unmanaged

changes. Another approach to this issue is to set those parts of a server’s filesystems

that should not change at runtime as read-only.

Immutable Servers Aren’t Really Immutable

Using the term “immutable” to describe this pattern can be misleading. “Immutable”

means that a thing can’t be changed, so a truly immutable server would be useless. As

soon as a server boots, its runtime state changes—processes run, entries are written to

logfiles, and application data is added, updated, and removed.

1 My colleague Peter Gillard-Moss and former colleague Ben Butler-Cole used immutable servers when they

worked on the ThoughtWorks’ Mingle SaaS platform.

Models for Server Change Management | 135

It’s more useful to think of the term “immutable” as applying to the server’s configu‐

ration, rather than to the server as a whole. This creates a clear line between configu‐

ration and data. It forces teams to explicitly define which elements of a server they

will manage deterministically as configuration and which elements will be treated as

data.

Containerized Servers

Standardized methods for packaging and distributing lightweight containers create

an opportunity to simplify server configuration management. With this model, each

application or service that runs on a server is packaged into a container, along with

all of its dependencies. Changes to an application are made by building and deploy‐

ing a new version of the container. This is the immutable infrastructure concept,

applied at the application level.

The servers that host containers can then be greatly simplified. These host servers can

be stripped down to a minimal system that only includes the software and configura‐

tion needed to run containers. Host servers could be managed using configuration

synchronization or the immutable server model; but in either case, because there isn’t

much to them, their management should be simpler than for more complex, fre‐

quently changing servers.

As of this writing, very few organizations have converted their infrastructure as radi‐

cally as this. Most are using containers for a minority of their applications and serv‐

ices. Containers are useful for applications that change frequently, such as software

developed in-house. And infrastructure teams are finding that at least some core

services work better running directly on the host rather than inside containers. But

assuming containerization continues to mature and becomes a standard way to pack‐

age applications for distribution, then this could become a dominant model for infra‐

structure management.

General Patterns and Practices

There are a number of practices and patterns that can be relevant with different

server change management models.

Practice: Minimize Server Templates

The less you have on your servers to start with, the less you need to manage after‐

ward. This is also a good idea for security, performance, stability, and troubleshoot‐

ing. This can be done during the template building process, as discussed in the

previous chapter.

136 | Chapter 8: Patterns for Updating and Changing Servers

Practice: Replace Servers When the Server Template Changes

When a server template is updated and new servers are created from it, the new

servers may be different from existing servers that were created from previous ver‐

sions of the template. For example, the template may be changed to use a new version

of the OS distribution, which includes updates to libraries and other server elements

that aren’t explicitly managed by configuration definitions.

If servers are kept in use for a long time—months for example—and templates are

updated several times, a team can end up with a fair bit of configuration drift that

continuous synchronization won’t resolve.

So it’s a good practice to replace running servers whenever the template used to build

them is updated, as illustrated in Figure 8-1. This should be done progressively rather

than in a disruptive big bang. For example, a new template can be applied to test

environments, then promoted to more sensitive environments. See Chapter 12 for

more on this. Also, members of a server cluster can be replaced sequentially, to avoid

disrupting service. See Chapter 14 for ideas on this.

Figure 8-1. Server templates with continuous synchronization

Pattern: Phoenix Servers

Some organizations have found that routinely replacing servers, even when the server

template hasn’t been updated, is a good way to combat configuration drift. In effect,

this achieves the goal of having 100% of your machine’s surface area automatically

managed. Any changes that happen to parts of the server not managed by configura‐

tion definitions that are continuously synchronized will be reset when the server is

rebuilt from the server template.

This is implemented by setting a maximum lifespan for all servers, and having a pro‐

cess that runs on a schedule to rebuild servers older than this limit. This process

General Patterns and Practices | 137

should ensure that service is not interrupted—for example, by using zero-downtime

replacement patterns (see “Zero-Downtime Changes” on page 282 in Chapter 14).

Patterns and Practices for Continuous Deployment

Continuous synchronization involves regularly running a process to apply the cur‐

rent configuration definitions to a given server. This process can work in one of two

different ways. With the push model, a central process controls the schedule, con‐

necting to individual servers to send and apply the configuration. With the pull

model, a process on the server itself runs, downloading and applying the latest con‐

figuration definitions.

Pushing to synchronize

Many server configuration tools have a master server that pushes configuration to the

servers it manages. Push configuration may need a client running on each managed

server, which receives commands from the server on a network port or message bus.

Other systems use remote command protocols like SSH to connect and execute con‐

figuration commands, in which case client software may not be needed. In either

case, it’s a central server that decides when it’s time to synchronize and then orches‐

trates the process.

Ansible, for example, connects over SSH, copies scripts onto the target server, and

executes them. The only requirement for a machine to be managed by Ansible is an

SSH daemon and the Python interpreter.

An advantage of the push approach is that it gives centralized control over when and

where to apply configuration changes. This can help if changes need to be orchestra‐

ted across an infrastructure in a certain order or with certain timings. Ideally you

should design systems with loose coupling that avoids the need for this type of

orchestration, but in many cases it’s difficult to avoid.

Pulling to synchronize

Pull configuration uses an agent installed on the managed server to schedule and

apply changes. It could be a scheduled Cron job, or else a service that runs its own

scheduler. The client checks a master or some central repository to download the lat‐

est configuration definitions, and then applies them.

The pull model has a simpler security model than the push model. With the push

model, each managed server needs to expose a way for the master to connect and tell

it how to configure itself, which opens up a vector for a malicious attack. Most tools

implement an authentication system, often using certificates, to secure this, but of

course this requires managing keys in a secure way. Ansible’s use of SSH lets it take

138 | Chapter 8: Patterns for Updating and Changing Servers

advantage of a widely used authentication and encryption implementation rather

than inventing its own.

With a pull system, there is still a need to ensure the security of the central repository

that holds the configuration definitions, but this is often simpler to secure. Managed

servers don’t need to make any ports or login accounts available for an automated

system to connect.

Depending on the design of the configuration tool, a pull-based system may be more

scalable than a push-based system. A push system needs the master to open connec‐

tions to the systems it manages, which can become a bottleneck with infrastructures

that scale to thousands of servers. Setting up clusters or pools of agents can help a

push model scale. But a pull model can be designed to scale with fewer resources, and

with less complexity.

Pattern: Masterless Configuration Management

Many teams find it effective to scrap the idea of a centralized server, even when the

configuration tool they’re using supports it. The main reasons for doing this are to

improve stability, uptime, and scalability.

The approach is to run the configuration management tool in offline mode (e.g.,

chef-solo rather than chef-client), using copies of configuration definitions that have

been downloaded to the managed server’s local disk.

Doing this removes the master server as a potential point of failure. The definitions

still need to be downloaded, but they can be hosted as static files. This can scale very

well with minimal resources; object storage services (discussed in “Object storage” on

page 27) work very well for this.

Another way teams implement the masterless pattern is by bundling the definitions

into a system package like an .rpm or .deb file and hosting it in their private package

repository. They run a script from Cron, which executes yum update or apt-get

update to download and unpack the latest definitions before running the configura‐

tion tool.

Practice: Apply Cron

A team that uses a server configuration tool such as Ansible, Chef, or Puppet to con‐

tinuously synchronize configuration can use the same tool when building server tem‐

plates and also when bootstrapping new servers. This allows configuration definitions

to be reused and ensures that newly built templates and newly created servers have

the latest configurations. See Figure 8-2.

Patterns and Practices for Continuous Deployment | 139

Figure 8-2. Using the same configuration tool across the server lifecycle

Packaging the template

Apply a subset of configuration definitions that are common to all server roles

built from the particular template.

Creating the server

Apply all of the definitions for the new server’s role. This prepares the server for

its specified role and also applies any changes that were made to the common

definitions since the server template was packaged.

Updating the server

The configuration definitions are regularly applied to keep the server’s configu‐

ration in line and up to date.

Continuous Synchronization Flow

With continuous synchronization, configuration definitions are applied and repeat‐

edly reapplied to a server. Figure 8-3 shows this process. After a configuration defini‐

tion has been applied to a server, assuming nothing has changed, then the repeated

runs of the tool won’t make any changes. When a definition is changed and made

available, then the configuration tool will make the change to the server the next time

it runs.

140 | Chapter 8: Patterns for Updating and Changing Servers

Figure 8-3. Making a change with configuration synchronization

This process ensures that changes made outside of the automation are reverted, as

shown in Figure 8-4. When someone makes a manual change on the server that con‐

flicts with a configuration definition, the next time the configuration process runs, it

reapplies the definition, reverting the manual change.

Figure 8-4. Reverting a manual change with configuration synchronization

The Unconfigured Country

When using continuous synchronization, it’s important to be aware that the majority

of a server will not be managed by the configuration definitions that are applied on

every run. As shown in Figure 8-5, configuration definition files can only cover a

fraction of the surface area of a server’s configuration.

Patterns and Practices for Continuous Deployment | 141

Figure 8-5. Sources of things on a server

The majority of a server’s configuration actually comes from the server template (e.g.,

AMI, OS installation disc, etc.) used to create the server. Once the server is up and

running, this is essentially unmanaged. This is often not a problem. The fact that you

haven’t written a configuration definition to manage a particular part of the server

probably means you’re happy with what’s on the server template and that you don’t

need to make changes to it.

But these unmanaged areas do leave the door open to configuration drift. If someone

finds the need to change the configuration in an unmanaged part of a server, they

may be tempted to make it manually rather than going through the hassle of writing a

new configuration definition. This then means that particular change isn’t captured

in a way that ensures it will always be made where it’s needed. It can also create a

snowflake server, where an application works on some servers but not others, but

nobody remembers why.

Why unmanaged areas are unavoidable

An obvious solution to this issue is to make sure configuration definitions cover

everything on the system. But this simply isn’t realistic with the current generation of

configuration tools. There are two major obstacles. One is that there are too many

things on a server than can be realistically managed with current tools. The other is

that current tools can’t prevent unwanted things from being added to a system.

First, consider how much stuff would need to be managed. As discussed in the side‐

bar “How Many Things Are on a Linux Server” on page 143, even using a pared-down

Linux server image leaves a huge number of files. Writing and maintaining configu‐

ration definitions to explicitly manage every one of these is a ridiculous amount of

work.

142 | Chapter 8: Patterns for Updating and Changing Servers

How Many Things Are on a Linux Server

I built some fresh VMs to see how many files are on a typical server, before adding

applications and services. I did this with CentOS 6.6, using CentOS-6.6-x86_64-

minimal.iso, and then with CoreOS version 607.0.0, to see how a JEOS distribution

compares.

Running find /etc -type f | wc -l shows the configuration files on the server.

My CentOS VM had 712 files, while CoreOS had only 58.

I then ran a similar find command across root folders that tend to include files man‐

aged by configuration definitions and/or packages, but which don’t normally have

transient or data files.

The folders I included in this were: /bin, /etc, /lib, /lib64, /opt, /sbin, /selinux, and /usr.

My CentOS VM had 38,496 files, and my CoreOS VM had 4,891.

So while a JEOS server can dramatically reduce the number of files that might need to

be managed, there are still quite a few.

Even if you declare everything that exists on a given server, maybe by taking a snap‐

shot of it, there are still the things that you don’t want on it. This is a literally infinite

set of things you’d have to write definitions to exclude—“on web server machines,

ensure there is no installation of MySQL, no Oracle, no websphere application server,

and so on.”

You could handle this with a white-listing approach, deleting everything on the sys‐

tem that isn’t explicitly declared. But there are many transient files and data files that

are needed for the server to work properly, but which can’t be predicted ahead of

time. You would need to make sure that data files, logs, temp files, and the like are all

protected. Current server configuration tools simply don’t support this.

This isn’t to say that this can’t or won’t be made much easier than it is with current

tools. And most teams get along just fine without an obsessive level of control over

every element of their servers.

Patterns and Practices for Immutable Servers

Once an immutable server is created from its server template, its configuration files,

system packages, and software are not modified on the running server instance. Any

changes to these things are made by creating a new server instance. However, servers

are vulnerable to configuration drift if left running for long periods, so teams using

immutable servers tend to keep their lifespan short, following the phoenix pattern

described earlier in this chapter.

Patterns and Practices for Immutable Servers | 143

Teams using immutable servers need more mature server template management

because of the need to build new templates quickly and often.

Of course, immutable servers aren’t truly immutable. Aside from transitory runtime

state, there is often a need to maintain application and system data, even as servers

come and go.2

Server Image as Artifact

One of the key drivers for adopting immutable servers is strong testing. Once a server

template is created and tested, there is a smaller chance for untested changes and var‐

iation to happen on a production server. Runtime state and data will change, but sys‐

tem libraries, configuration files, and other server configuration won’t be updated or

revised at runtime, as can happen with continuous synchronization. Change manage‐

ment pipelines (as described in Chapter 12) can help to ensure the quality of a

template.

Simplifying Confirmation Management Tooling with Immutable

Servers

Many teams that embrace the immutable model find they can simplify the tooling

they use to configure servers when preparing a server template. Ansible, Chef, Pup‐

pet, and similar tools are designed to be run continuously, which adds some com‐

plexity to their design and use. They need to be able to apply configuration

definitions to servers that may be in different states when the tools run, including

running repeatedly when the configuration has already been applied.

But configuration, which is always done to a server template, can make assumptions

about the starting state of the server when they run. For example, a new template may

always be built using a base OS installation image. It’s common for teams to use a

series of fairly simple shell scripts to configure server templates, which reduces their

tooling and maintenance overhead.

Immutable Server Flow

Figures 8-6 and 8-7 show the typical flow for making a change with immutable

servers. The existing servers have been built from the server template image gener‐

ated from the first version of the server template definition file—for example, a

Packer template file.

2 Chapter 14 explores ways to manage data that needs to persist across the lifespan of individual servers.

144 | Chapter 8: Patterns for Updating and Changing Servers

Figure 8-6. Immutable server flow (part one)

A change is needed, so the template definition file is changed and then used to pack‐

age a new version of the server template image. This image is then used to build new

servers to replace the existing servers.

Figure 8-7. Immutable server flow (part two)

The process for replacing a running server with a new one will ideally be done

without interrupting services provided by the server.3

Bootstrap Configuration with Immutable Servers

The purest use of immutable servers is to bake everything onto the server template

and change nothing, even when creating server instances from the template. But

3 Patterns for doing this are discussed in Chapter 14 (“Zero-Downtime Changes” on page 282).

Patterns and Practices for Immutable Servers | 145

some teams have found that for certain types of changes, the turnaround time needed

to build a new template is too slow.

An emerging practice is to put almost everything into the server template, but add

one or two elements when bootstrapping a new server. This might be a configuration

setting that is only known when the server is created, or it might be a frequently

changing element such as an application build for testing. 4

A small development team using continuous integration (CI) or continuous delivery

(CD) is likely to deploy dozens of builds of their application a day, so building a new

server template for every build may be unacceptably slow. Having a standard server

template image that can pull in and start a specified application build when it is

started is particularly useful for microservices.

This still follows the immutable server pattern, in that any change to the server’s con‐

figuration (such as a new version of the microservice) is carried out by building a new

server instance. It shortens the turnaround time for changes to a microservice,

because it doesn’t require building a new server template.

However, this practice arguably weakens the testing benefits from the pure immuta‐

ble model. Ideally, a given combination of server template version and microservice

version will have been tested through each stage of a change management pipeline. 5

But there is some risk that the process of installing a microservice, or making other

changes, when creating a server will behave slightly differently when done for differ‐

ent servers. This could cause unexpected behavior.

So this practice trades some of the consistency benefits of baking everything into a

template and using it unchanged in every instance in order to speed up turnaround

times for changes made in this way. In many cases, such as those involving frequent

changes, this trade-off works quite well.

Example of a Team’s Microservice Application Standards

A number of teams I’ve worked with have used the pattern of standardized applica‐

tion deployments. They typically develop multiple microservice applications and

want to be able to add and change these applications without needing to change the

infrastructure. They do this by having conventions around how an application is

packaged, deployed, and managed by the infrastructure. The infrastructure can then

deploy and run any application developed according to these standards.

The following are some of the standards agreed by one team.

4 Cloud-init is a useful tool for handling these simple bootstrap activities, as discussed in Chapter 6 (“Pulling to

Bootstrap” on page 113).

5 As described in Chapter 12.

146 | Chapter 8: Patterns for Updating and Changing Servers

Applications are packaged as a tarball ( .tar.gz file), including certain files at root level:

• A JAR file named SERVICEID-VERSION.jar, where VERSION follows a format

matching the regular expression (\d+)\.(\d+)\.(d+)

• A configuration file named SERVICEID-config.yml

• A shell script named SERVICEID-setup.sh

To deploy the application, the server provisioning script will download the artifact

from a URI passed in the environment variable SERVICE_ARTEFACT_URI. It will then

extract the contents of the artifact to the directory /app/SERVICEID, which will be

owned by a user account named SERVICEID. It will also create a file in this same

directory named SERVICEID-env.yml, which contains some configuration informa‐

tion specific to the environment.

The provisioning script also runs the SERVICEID-setup.sh script, which can carry out

any initialization activities needed before the application is started. Finally, the provi‐

sioning script creates and enabled a service startup script as /etc/init.d/SERVICE‐

NAME, which starts the application by running the startup command java -

jar /app/SERVICEID/SERVICEID-VERSION.jar server.

Developers can build an application based on these standards and know that it will

work seamlessly with the existing infrastructure and tooling.

Transactional Server Updates

Another approach with potential is transaction server updates. This involves package

management tooling that supports updating all of the packages on a server to a

defined set of versions as an atomic transaction. If any of the updates fail, the entire

set of updates is rolled back. This ensures that the server’s configuration, at least as

far as system packages, don’t end up in an untested state. The server will either be

updated to the new, completely tested state, or reverted to the existing state, which

was presumably tested previously. 6

This approach has a lot in common with immutable servers, and also with containers.

6 NixOS is a Linux distribution that provides atomic updates and rollbacks of groups of packages, using the Nix

package management tool.

Patterns and Practices for Immutable Servers | 147

Practices for Managing Configuration Definitions

Teams moving to infrastructure as code, especially those using continuous synchro‐

nization, find that working with configuration definitions for their toolchain

becomes a core activity. 7 This section discusses a few practices specifically useful for

managing configuration definitions for configuring servers.

Practice: Keep Configuration Definitions Minimal

Code, including configuration definitions, has overhead. The amount of time your

team spends writing, maintaining, testing, updating, debugging, and fixing code

grows as the amount of code grows. This overhead grows exponentially, considering

each piece of code has interactions with at least some other code. These interactions

may be deliberate (i.e., one piece of code may depend on another) or unintentional

(i.e., two pieces of code happen to affect common parts of the system in a way that

can create conflicts).

Teams should strive to minimize the size of their codebase. This doesn’t mean writ‐

ing code that uses the least number of lines as possible, an approach that can actually

make code harder to maintain. Rather, it means avoiding the need to write code

whenever possible. Most of what is configured on a server is undeclared; it comes

from the server template used to create a server, rather than being explicitly defined

in a configuration definition.

This is a good thing. As a rule, an infrastructure team should only write and maintain

configuration definitions to cover areas that really require explicit, continuous con‐

figuration. This will include parts of the system that need to change quite often, and

those that most need to be protected from unwanted, unmanaged changes.

A useful approach to implementing automated configuration is to start small, writing

definitions for the things you need most. Over time you’ll discover changes that are

needed, so you can add definitions for those. You should also keep a constant eye out

for definitions that are no longer needed and so can be pruned.

Of course, there is a trade-off between minimizing configuration definitions and

leaving areas of the servers unmanaged, with the potential for configuration drift.

7 Chapter 10 explains a number of software development practices that are useful for infrastructure developers.

148 | Chapter 8: Patterns for Updating and Changing Servers

Organizing Definitions

Configuration definitions, as with any code, seem to enjoy becoming a large, compli‐

cated mess over time. It takes discipline and good habits to avoid this. Once an infra‐

structure team gets a handle on the basics of writing and using a server configuration

tool, they should invest time in learning how to use the tool’s features for modulari‐

zation and reuse.

The goal is to keep individual modules or definition files small, simple, and easy to

understand. At the same time, the overall organization needs to be clear so anyone

with a reasonable understanding of the tool can quickly find and understand the sec‐

tions of definitions that are involved in a given part of the system.8

Some server configuration tools have evolved tools that help to manage groups of

configuration definitions as packages or libraries. These libraries can be developed,

versioned, published, and installed independently from one another. They typically

have a dependency management system, so installing one library will automatically

trigger other libraries to be installed if they are needed.

Examples of Package Management Tools for Configuration Definitions

A few examples of tools to manage libraries of configuration defi‐

nitions include Berkshelf for Chef, and Librarian-puppet and r10k

for Puppet.

Practice: Use Test-Driven Development (TDD) to Drive Good Design

A common misunderstanding of TDD is that it’s just a way to make sure automated

tests get written as code is developed. But developers and teams who become effective

at TDD find that its main value is in driving clean, maintainable code design.

The way this works with configuration definitions is ensuring that every module has

a set of unit tests for testing that module in isolation. If the tests are written and

maintained with good discipline, they make it clear when a module is becoming too

large or complicated, because the tests become more difficult to update and to keep

working as the definitions are updated. Tests also reveal when a module is too tightly

coupled to its dependencies, because this makes it difficult to set up self-contained

tests.9

8 Chapter 10 gives more ideas about how to do this.

9 Chapters 10 and 11 go into the software engineering and test automation practices behind this.

Practices for Managing Configuration Definitions | 149

Conclusion

This chapter, along with the previous two, have focused on provisioning and updat‐

ing individual servers. The next chapter will pull the focus out to larger sections of

infrastructure, looking at how to manage environments and interrelated systems and

services.

150 | Chapter 8: Patterns for Updating and Changing Servers

CHAPTER 9

Patterns for Defining Infrastructure

Most of Part II of this book has focused on provisioning and configuring servers.

This chapter will look at how to provision and configure larger groups of infrastruc‐

ture elements. As infrastructure grows in size, complexity, and number of users, it

becomes harder to achieve the benefits of infrastructure as code:

• The larger scope of what may be affected by a given change makes it difficult to

make changes frequently, quickly, and safely.

• People spend more time on routine maintenance and firefighting, and less on

making more valuable improvements to services.

• Allowing users to provision and manage their own resources can risk disruption

to other users and services.

The typical reaction is to centralize control over infrastructure. This leads to more

time spent on meetings, documentation, and change process, and less time spent on

activities that add value to the organization.

But an alternative to centralizing control is to design infrastructure to minimize the

scope of impact of a given change. An effective approach to defining, provisioning,

and managing infrastructure will enable changes to be made frequently and confi‐

dently even as the size of the infrastructure grows. This in turn allows ownership of

application and service infrastructure to be safely delegated.

151

What Is a Stack?

A stack is a collection of infrastructure elements that are defined as

a unit (the inspiration for choosing the term stack comes mainly

from the term’s use by AWS CloudFormation).

A stack can be any size. It could be a single server. It could be a

pool of servers with their networking and storage. It could be all of

the servers and other infrastructure involved in a given application.

Or it could be everything in an entire data center. What makes a set

of infrastructure elements a stack isn’t the size, but whether it’s

defined and changed as a unit.

The concept of a stack hasn’t been commonly used with manually

managed infrastructures. Elements are added organically, and net‐

working boundaries are naturally used to think about infrastruc‐

ture groupings.

But automation tools force more explicit groupings of infrastruc‐

ture elements. It’s certainly possible to put everything into one

large group. And it’s also possible to structure stacks by following

network boundaries. But these aren’t the only ways to organize

stacks.

Rather than simply replicating patterns and approaches that

worked with iron-age static infrastructure, it’s worth considering

whether there are more effective patterns to use.

This chapter is concerned with ways of organizing infrastructure into “stacks” to sup‐

port easier and safer change management. What are good ways of dividing infra‐

structure into stacks? What is a good size for a stack? What are good approaches to

defining and implementing stacks?

Environments

The term “environment” is typically used when there are multiple stacks that are

actually different instances of the same service or set of services. The most common

use of environments is for testing. An application or service may have “develop‐

ment,” “test,” “preproduction,” and “production” environments. The infrastructure

for these should generally be the same, with perhaps some variations due to scale.

Keeping multiple environments configured consistently is a challenge for most IT

organizations, and one which infrastructure as code is particularly well suited to

address.

152 | Chapter 9: Patterns for Defining Infrastructure

Antipattern: Handcrafted Infrastructure

It’s not unusual for teams that automatically provision and configure their servers to

manually define surrounding infrastructure elements, such as networking and stor‐

age. This is especially common when using virtualized servers with non-virtualized

storage and networking. Quite often, teams will script server creation but use an

interactive interface to configure networking and allocate storage.

For example, setting up a database cluster for a new environment may involve some‐

one allocating disk space on a storage area network (SAN), and then configuring fire‐

wall rules and selecting IP addresses for the servers in the cluster.

Changes made manually with an interactive GUI or tool aren’t easily repeatable, and

lead to inconsistency between environments. A firewall change made by hand in a

test environment may not be made the same way for the production environment.

Organizations that work this way often find they need to take extra time to manually

test and inspect each environment after it’s built. Signs that this is an issue is if it is

common practice to allocate time on project plans for correcting mistakes after set‐

ting up new environments, or else that it’s common for implementation schedules to

slip due to unexpected errors.

Snowflake Environments

As with snowflake servers, an environment that is “special” can be

difficult to rebuild, which makes it scary to change and improve.

It’s very common to see this for infrastructure services like moni‐

toring, and other internally facing services such as bug tracking

systems. Resist the temptation to treat setting up this kind of sys‐

tem as a one-off task that isn’t worth properly automating.

Defining Infrastructure Stacks as Code

Figure 9-1 illustrates a stack with a simple web server cluster with frontend network‐

ing.

The Terraform file excerpt in Example 9-1 shows how this stack might be defined on

AWS. The definition file would be committed to a VCS so that it can be easily rebuilt

or replicated.

Environments | 153

Figure 9-1. A simple environment

The first two blocks each define a web server, specifying the server template (AMI)

and the size of the server. The third block defines a load balancer (ELB). This defines

the port to take requests on and forward them to, and references to the server instan‐

ces defined in the earlier blocks as the destination for requests. The ELB block also

refers to the security group, defined in the last block of the example, which is the fire‐

wall rule to allow traffic in.1

Example 9-1. Terraform definition for a simple stack

resource "aws_instance" "web_server_1" {

ami = "ami-47a23a30"

instance_type = "t2.micro"

}

resource "aws_instance" "web_server_2" {

ami = "ami-47a23a30"

instance_type = "t2.micro"

}

resource "aws_elb" "web_load_balancer" {

name = "weblb"

listener {

instance_port = 80

instance_protocol = "http"

lb_port = 80

lb_protocol = "http"

}

1 Note that this is not a well-designed example. In practice, you should use a dynamic pool of servers—an

autoscaling group in AWS—rather than statically defined ones. It’s preferable to have the AMIs defined as

variables so they can be changed without having to edit and push changes to this definition file.

154 | Chapter 9: Patterns for Defining Infrastructure

instances = [

"${aws_instance.web_server_1.id}",

"${aws_instance.web_server_2.id}"

]

security_groups = ["${aws_security_group.web_firewall.id}"]

}

resource "aws_security_group" "web_firewall" {

name = "web_firewall"

ingress {

from_port = 80

to_port = 80

protocol = "tcp"

cidr_blocks = ["0.0.0.0/0"]

}

}

Antipattern: Per-Environment Definition Files

A simplistic way of managing multiple, similar environments is to have a separate

definition file for each environment, even when the environments are used to run

different instances of the same application or service.

With this approach, a new environment can be made by copying the definition file

from another environment and editing it to reflect differences such as networking

details. When a fix, improvement, or other change is made, it is made by hand to

each of the separate definition files.

This dependency on manual effort to keep multiple files up to date and consistent is

the weakness of per-environment definition files. There is no way to ensure that

changes are made consistently. Also, because the change is made manually to each

environment, it isn’t possible to use an automated pipeline to test and promote the

change from one environment to the next.

Pattern: Reusable Definition Files

A more effective approach is to use a single definition file across all of the environ‐

ments that represent the same application or service. The file can be parameterized to

set options specific to each environment. This makes it easy to build and run multiple

instances of an infrastructure stack.

The earlier Terraform definition (Example 9-1) can be modified to use environment-

specific parameters. Example 9-2 shows part of the previous example, adding tags to

the servers to indicate the environment. A variable environment is declared, signal‐

Environments | 155

ling that it should be provided to the Terraform command-line tool. This variable is

then used to set the value of a tag on the AWS EC2 instance.

Example 9-2. Parameterized Terraform environment definition

variable "environment" {}

resource "aws_instance" "web_server_1" {

ami = "ami-47a23a30"

instance_type = "t2.micro"

tags {

Name = "Web Server 1"

Environment = "${var.environment}"

}

}

resource "aws_instance" "web_server_2" {

ami = "ami-47a23a30"

instance_type = "t2.micro"

tags {

Name = "Web Server 2"

Environment = "${var.environment}"

}

}

The definition tool is run separately for each environment.

First for QA:

$ terraform apply -state=qa-env.tfstate -var environment=qa

Then the tool is run again for PROD:

$ terraform apply -state=prod-env.tfstate -var environment=prod

This creates two sets of servers, and assuming the load balancer is similarly parame‐

terized, it creates separate ELBs as well.

Separate State Files or IDs per Environment

These Terraform command-line examples use the -state parame‐

ter to define a separate state data file for each environment. Terra‐

form stores information about infrastructure that it manages in a

state file. When managing multiple instances of an infrastructure

with a single definition file, each instance needs to have its state

stored in a separate file.

Other definition tools, such as CloudFormation, store the state

server side and allow each instance to be identified by a parameter

(StackName, in the case of CloudFormation).

156 | Chapter 9: Patterns for Defining Infrastructure

Practice: Test and Promote Stack Definitions

A reusable, parameterized definition file can be reliably tested before being applied to

production infrastructure. Rather than making a networking configuration change

directly to a production environment, the change can be made to the relevant defini‐

tion file, and applied to a test environment first. Automated tests can validate

whether there are any errors or issues with the change. Once testing has been carried

out, the change can be safely rolled out to the production infrastructure.

Because the process for applying the configuration is automated, there is a far higher

confidence in the reliability of testing. The ease of creating and modifying a test envi‐

ronment also lowers barriers. When people need to manually set up and run tests,

they are tempted to skip it when they’re in a hurry, telling themselves it’s a small

change that shouldn’t break anything.

This leads to test environments that aren’t configured consistently with production,

which makes testing less reliable. This in turn gives more reason not to bother with

testing. This is the automation fear spiral (see “Automation Fear” on page 9) all over

again. Using a single definition file across environments makes it trivial to keep the

environments consistently configured.

Simplifying Change Management Process for Environments

In larger organizations with a need for strong governance around

changes to infrastructure, making a configuration change and roll‐

ing it out across the pipeline of test, staging, and production envi‐

ronments can be lengthy.

Making a single change may require a separate change process for

each environment, with detailed designs, tickets, change requests,

and change reviews. In many cases, different people may imple‐

ment the same change in different environments. When this is a

manual process, no amount of documentation or inspection can

guarantee the change will be implemented consistently.

The proper use of a reusable environment definition, in conjunc‐

tion with an automated pipeline, can make this process simpler,

faster, and more consistent. The amount of process overhead

needed can be dramatically reduced. What’s more, because

changes, and the process used to apply them, are explicitly defined

in files and managed in a VCS, it is easy to provide traceability and

assurance that legal and other requirements are being complied

with.

Environments | 157

Self-Service Environments

Another benefit of parameterized environment definitions is that new instances can

be easily created.

For example, development and testing teams don’t need to coordinate access to

shared environments, slowing their pace of work. A new environment can be built in

minutes. Environments can even be created and destroyed on demand.

This can also be used with standard services, such as a ticketing application like JIRA.

Each team can easily be given their own instance, avoiding the need to coordinate

configuration changes across multiple teams.

Environment and service instances defined through a common definition file can be

provisioned through self-service. Rather than requiring infrastructure team members

to take time to set up services and infrastructure, a team can use a predefined, well-

tested template to spin up their own instance.

It’s important that self-service provisioning be supported by a process for updates.

When a change is made to a shared infrastructure definition, it should be rolled out

to all existing instances. A change management pipeline can ensure that changes are

tested before being rolled out to teams using them, and that they are applied and tes‐

ted to test environments for applications before being applied to production environ‐

ments.

Organizing Infrastructure

An infrastructure is normally composed of a variety of interrelated stacks. Some

stacks share infrastructure like networking devices. Others have interdependencies

that require networking connections between them. And there is normally a continu‐

ous stream of changes that need to be made to some or all stacks, which can poten‐

tially create issues.

This section looks at some ways to organize infrastructure stacks to address these

concerns.

Antipattern: Monolithic Stack

When first adopting an infrastructure definition tool, it’s easy to create large, sprawl‐

ing infrastructure in a single definition. Different services and applications, even dif‐

ferent testing environments, can all be defined and managed together.

This simplifies integration of different elements of the infrastructure, and sharing

them. In the monolithic stack shown in Figure 9-2, the shared pool of web servers

needs to be configured to access two different pools of content management system

(CMS) servers. Having all of these configured in one file is convenient. If a new CMS

158 | Chapter 9: Patterns for Defining Infrastructure

server is added to the definition, it can be referred to by the web servers and network

routing.

Figure 9-2. A monolithic environment

The difficulty of a monolithic definition is that it becomes cumbersome to change.

With most definition tools, the file can be organized into separate files. But if making

a change involves running the tool against the entire infrastructure stack, things

become dicey:

• It’s easy for a small change to break many things.

• It’s hard to avoid tight coupling between the parts of the infrastructure.

• Each instance of the environment is large and expensive.

Organizing Infrastructure | 159

• Developing and testing changes requires testing an entire stack at once, which is

cumbersome.

• If many people can make changes to the infrastructure, there is a high risk some‐

one will break something.

• On the other hand, if changes are limited to a small group to minimize the risk,

then there are likely to be long delays waiting for changes to be made.

You know your infrastructure definition is becoming monolithic when people

become afraid to make a change. When you find yourself considering adding organi‐

zational processes to coordinate and schedule changes, stop! There are ways to orga‐

nize your infrastructure to make it easier and safer to make changes. Rather than

adding organizational and process complexity to manage complex infrastructure

designs, redesign the infrastructure to eliminate unnecessary complexity.

Avoid “Lift and Shift” When Migrating Infrastructure

Organizations that have existing, static infrastructure will have become accustomed

to their architectural patterns and implementations. It’s tempting to assume these are

still relevant, and even necessary, to keep when moving to a dynamic infrastructure

platform.

But in many cases, applying existing patterns will, at best, miss out on opportunities

to leverage newer technology to simplify and improve the architecture. At worst, rep‐

licating existing patterns with the newer platforms will involve adding even more

complexity.

It can be difficult to see “outside the box” of an existing, proven infrastructure imple‐

mentation, but it’s well worth the effort.

Dividing an Application Environment into Multiple Stacks

Multitier applications can be divided into multiple stacks to allow each tier to be

changed independently. Figure 9-3 shows a stack each for web servers, application

servers, database cluster, and networking.

These stacks have interdependencies. The web server stack needs to be added to the

firewall and subnets defined in the network stack. It also needs to know the IP

address of the load balancer VIP for the application server stack, so the web servers

can be configured to proxy requests to the application server. The application server

stack will similarly need the IP addresses of the database cluster.

160 | Chapter 9: Patterns for Defining Infrastructure

Figure 9-3. An environment divided into stacks

Example 9-3 shows parts of a Terraform definition2 for the web server stack from

Figure 9-3. It assumes the networking stack, application server stack, and database

stack are all defined in separate files, and each built and updated separately.

So this definition only defines the infrastructure elements that are specific to the web

server pool, including the autoscaling group and load balancer. Changes can be made

to this file and applied, with only minimal coupling to the other stacks in an environ‐

ment.

2 In the interests of clarity, this example excludes a number of arguments that would be needed for it to actually

work.

Organizing Infrastructure | 161

Example 9-3. Web server stack definition

# Declare a variable for passing the app server pool's IP address

variable "app_server_vip_ip" {}

# Define the web server pool

resource "aws_autoscaling_group" "web_servers" {

launch_configuration = "${aws_launch_configuration.webserver.name}"

min_size = 2

max_size = 5

}

# Define how to create a web server instance for the pool

resource "aws_launch_configuration" "webserver" {

image_id = "ami-12345678"

instance_type = "t2.micro"

# Pass the IP address of the app server pool so it can be used

# by the server configuration tool

user_data { app_server_vip_ip = "${app_server_vip_ip}" }

}

# Define the load balancer for the web server pool

resource "aws_elb" "web_load_balancer" {

instances = [ "${aws_asg.web_servers.id}" ]

listener {

instance_port = 80

instance_protocol = "http"

lb_port = 80

lb_protocol = "http"

}

}

Managing Configuration Parameters Between Stacks

A basic, and not very scalable technique for coordinating information between infra‐

structure stacks is to have a script that runs the definition tool for all of the different

stacks. It makes sure to run them in the appropriate order, and captures the outputs

of each stack so they can be passed as variables to other stacks. However, this is brit‐

tle, and loses the advantage of being able to run the definition tool independently for

different stacks.

This is where a configuration registry3 comes in handy. It provides a structured way

to capture information about a stack, and make it available in a central location for

other stacks to use.

3 As described in Chapter 3 (“Configuration Registries” on page 55), there are different types of tooling and

approaches that can be used for a configuration registry.

162 | Chapter 9: Patterns for Defining Infrastructure

Many infrastructure definition tools have built-in support for setting and fetching

values from a registry.

Example 9-4 modifies Example 9-3 to use a Consul configuration registry. It finds the

IP address of the application server stack’s load balancer VIP in the registry, looking

up the key path myapp/${var.environment}/appserver/vip_ip. Using var.environment

allows this definition file to be shared across multiple environments, each storing its

own app server VIP in a unique location.

Example 9-4. Application server stack definition using a registry

# The "environment" parameter must be passed in

variable "environment" {}

# Import keys from the Consul registry

resource "consul_keys" "app_server" {

key {

name = "vip_ip"

path = "myapp/${var.environment}/appserver/vip_ip"

}

}

resource "aws_launch_configuration" "webserver" {

image_id = "ami-12345678"

instance_type = "t2.micro"

# Pass the IP address of the app server pool so it can be used

# by the server configuration tool

user_data { app_server_vip_ip = "${consul_keys.app_server.var.vip_ip}" }

}

Lightweight registry approaches for sharing configuration between stacks

Some teams prefer to use a lightweight registry (discussed in “Lightweight Configura‐

tion Registries” on page 56) although it may require more work to implement than an

off-the-shelf tool. For example, the script that runs the definition tool might fetch

structured registry files (e.g., JSON or YAML files) from a static file sharing service

(e.g., an AWS S3 bucket), and pass it as parameters for applying the stack definition.

The output of the definition tool is then captured and stored in the file sharing ser‐

vice, where it will be used for other stacks.

This can be highly scalable and robust, because it can take advantage of standard

tools and techniques for hosting static files, including caching and distribution.

Packaging the outputs of a stack into a system package, like an RPM or .deb file, is

another technique that leverages existing, well-proven tooling, as does committing

the output files into a VCS.

Organizing Infrastructure | 163

Sharing Infrastructure Elements

By itself, the preceding example of splitting a single application environment into

several stacks may not be especially useful. Most definition tools only apply changes

to the part of the stack that has actually changed, anyway. So if you are making a

change to the web server tier, having the other tiers defined in separate files doesn’t

buy much. Worse, you’ve seen how much complexity is added to the system in order

to pass information between stacks.

However, dividing stacks makes more sense as the size and complexity of the infra‐

structure grows.

One use is to make it easier for different application environments to share infra‐

structure resources. Figure 9-4 shows two applications sharing a single frontend

stack, including a pool of web servers, and also sharing a database stack. Each appli‐

cation might have its own database schema and virtual web host in each of these

stacks. The application stacks are independently managed.

Figure 9-4. Two application environments sharing stacks

164 | Chapter 9: Patterns for Defining Infrastructure

Pitfalls of sharing infrastructure elements

Sharing stacks should be avoided whenever possible, because it creates dependencies

that can make changes expensive and risky.

Sharing is usually driven by hardware such as networking devices and storage. Hard‐

ware devices tend to be expensive, and changing them may be high effort. But virtual‐

ized and cloud infrastructure, driven by automated configuration, makes it cheaper

and easier to give each application dedicated resources.

The overhead of changes to infrastructure increases exponentially with the number of

applications and services that share it. This overhead is reflected in time, cost, and

risk.

In Example 9-4 with the database cluster shared between two applications, a change

to the cluster, such as upgrading the database server, affects both applications. The

change needs to be coordinated for both of these, which can make scheduling the

upgrade more challenging.

Both applications may need to be taken offline, have their schemas updated, brought

up, and then tested. If things go wrong, both applications may be offline for an exten‐

ded time. If one application works fine after the upgrade but the other doesn’t, both

will need to be rolled back.

Because changing shared infrastructure has a higher risk, organizations must put

more effort into planning and managing the change. This can involve meetings, doc‐

umentation, and project plans. A larger number of people need to schedule time for

planning, implementation, and testing. Project managers and analysts get involved to

handle all of this. Entire teams and departments may be created to oversee this type

of process.

One indication that this is an issue is when a simple change takes several months and

a budget running as high as five and six figures. Another indication is when the orga‐

nization is still running outdated versions of key system and middleware, having

been unable to muster the time and money to carry out upgrades that impact many

applications and services.

But by allocating dedicated infrastructure to each application, upgrades can be car‐

ried out in more manageable chunks, with less overhead.

At a glance, upgrading the database for each application one at a time may seem less

efficient than upgrading a single shared instance all in one go. But upgrading the

database for a single application has a much smaller risk area. Automation can cut

the time and improve the reliability of the upgrade process. The upgrade can be made

even more reliable by having it automatically applied and tested in a test environ‐

ment first.

Organizing Infrastructure | 165

This is another case where automation and dynamic infrastructure, when used the

right way, can dramatically simplify the change process while also making it less

risky.

Practice: Manage Application Code and Infrastructure Code Together

The default approach in many organizations is to manage the definitions for a given

application’s infrastructure separately from the code for that application. Application

code is kept in its own VCS project, and infrastructure definitions are kept in

another. Often, each is managed by a separate team. This follows the tradition of sep‐

arating development and operations concerns, but can add technical and organiza‐

tional overhead.

Consider a change that involves both the application and its infrastructure. An appli‐

cation might read environment-specific configuration options from a file that is

added to the system by a server configuration definition, such as an Ansible play‐

book. The file contains the IP address of the database server, which may be different

in each environment the application is deployed to. If the playbook is managed in a

separate VCS repository from the application code, then a new version of the applica‐

tion may be deployed to an environment that hasn’t had a new configuration option

added to the file yet.

Dividing ownership of an application from the configuration of its infrastructure

between teams adds even more complexity. In addition to technical integration

issues, the time and work of both teams need to be coordinated. When the infrastruc‐

ture is shared by multiple development teams, you see the same problems described

earlier in this chapter (“Pitfalls of sharing infrastructure elements” on page 165).

It’s certainly possible to manage the dependencies between an application and its

infrastructure even when they are managed separately, and by separate teams. But

this involves adding complexity, including technical mechanisms and organizational

processes.

An alternative is to manage application software and its supporting infrastructure as

a single concern.4 Putting the definitions for the application-specific infrastructure

elements into the same project folder as the development code, as shown in

Example 9-5, makes it easy to manage, test, and deliver them as a unit.

4 My former colleague Ben Butler-Cole put it well: “Build systems, not software.”

166 | Chapter 9: Patterns for Defining Infrastructure

Example 9-5. Project structure with combined application and infrastructure code

./our-app

./our-app/build.sh

./our-app/deploy.sh

./our-app/pom.xml

./our-app/Vagrantfile

./our-app/src

./our-app/src/java

./our-app/src/java/OurApp.java

./our-app/src/infra

./our-app/src/infra/terraform

./our-app/src/infra/terraform/our-app.tf

./our-app/src/infra/ansible

./our-app/src/infra/ansible/roles

./our-app/src/infra/ansible/roles/our_app_server

./our-app/src/infra/ansible/roles/our_app_server/files

./our-app/src/infra/ansible/roles/our_app_server/files/service.sh

./our-app/src/infra/ansible/roles/our_app_server/tasks

./our-app/src/infra/ansible/roles/our_app_server/tasks/main.yml

./our-app/src/infra/ansible/roles/our_app_server/templates

./our-app/src/infra/ansible/roles/our_app_server/templates/config.yml

Managing application and infrastructure definitions together means they can be tes‐

ted together. The preceding project structure includes configuration to build and

deploy the application to a local virtual machine with Vagrant. This allows develop‐

ers, testers, and operations people to run the application in a server that is configured

the same way as the production servers. Changes and fixes can be made and tested

locally with a high level of confidence.

A good rule of thumb for what code can and should be managed together is to con‐

sider the scope of a typical change. If it’s common for changes to involve modifying

code that lives in different VCS repositories, then putting them into the same reposi‐

tory is likely to simplify the process for making a change.

Approaches to Sharing Definitions

With many development teams, there are often benefits from sharing infrastructure

code. Getting the balance right between sharing good code and keeping team agility

can be tricky.

Central code libraries are a common approach to sharing infrastructure definitions

and code. Most server configuration tools support using a centralized library for

cookbooks or modules. So all of the application teams in an organization could use

the same Puppet module for building and configuring nginx web servers, for exam‐

ple. Improvements and upgrades can be made to the module, and all of the teams can

take advantage of it.

Organizing Infrastructure | 167

Of course, this risks the pitfalls of shared infrastructure, as a change can potentially

impact multiple teams. The overhead and risks this creates often discourages fre‐

quent updates.

A few approaches that some teams use to get around this:

Versioning of shared modules

Teams can opt-in to updates as they are released, so they can adopt newer ver‐

sions of modules as time permits.

Copy rather than share

Teams maintain templates for application and infrastructure code, and copy the

files as needed to create new applications, and fold in improvements as they

become available.

Optional sharing

Teams use a shared module, but have the option to write alternative modules if it

makes more sense for their needs.

Overridable modules

Modules are designed in a way that makes it easy for application teams to cus‐

tomize them and override behavior as needed.

As a rule, sharing functionality and definitions makes more sense for things where

the requirements are truly common, don’t change very often, and are low risk to

change. It also makes sense when there is a clear, easy way for teams to customize and

override the shared capability.

As an example, many organizations find that the base operating system distribution

can be shared fairly easily. So a server template with the base OS can be centrally cre‐

ated and made available to teams. Teams are able to customize this base, either by

building a new template that layers changes onto the base template (“Pattern: Layered

Template” on page 129), or by writing server configuration definitions (Chef, Puppet,

etc.) that makes changes to the base image when provisioning a new server instance.

In those rare cases where a team needs a different base image (e.g., if they’re running

third-party software that requires a different OS distribution) then they will ideally

have the option to create and manage their own images, potentially sharing them

with other teams.

Practice: Align Infrastructure Design with the Scope of Change

Clearly there are trade-offs to consider when deciding how to split infrastructure into

stacks. A division that makes sense in one organization may not make sense in

another, depending on the team structures and on the services that the infrastructure

supports.

168 | Chapter 9: Patterns for Defining Infrastructure

However, a good guiding principle when considering the breakdown is the scope of

change. Consider the types of changes that are made often, and those that are the

most difficult and risky. Then look at the parts of the infrastructure that are impacted

by each of those changes. The most effective structures will put those parts together.

Keeping the scope of a change together simplifies the technical integration, which in

turn simplifies the design and implementation of the systems involved. Simplified

design is easier to understand, test, secure, support, and fix. “Pitfalls of sharing infra‐

structure elements” on page 165 outlined the reasoning behind this principle.

When it’s not possible to keep the infrastructure affected by a change in a single

stack, or within a single team, then it’s important to make the interfaces between

them simple. Interfaces should be designed to be tolerant, so that a change or prob‐

lem with one side of the integration doesn’t break the other side.

Teams that provide services to other teams should make sure those other teams can

customize and configure them without involving the providing team. The model for

this is public cloud vendors. These vendors provide APIs and configuration, rather

than having a central team make configuration changes on behalf of their customers.

When considering different types of changes and their scope, it’s important to cast a

wide net. It’s important to optimize the most common and simple changes, such as

creating a new server of a standard type, or using a Chef cookbook for a common

service following the most common use case. But also consider the changes that don’t

fit into the common use cases. These are the ones that can take the most work to

implement if the infrastructure design is not aligned to make them simple.

Example: An Infrastructure Design for Microservices

Microservices is proving to be a popular style of software architecture for deploying

to the cloud. Its approach of breaking systems into small-ish, independently deploya‐

ble pieces of software aligns well with the approach to defining infrastructure

described in this chapter. Figure 9-5 describes a design for implementing infrastruc‐

ture for an example microservices-based application on AWS.

A typical microservice may be composed of an application and a corresponding data‐

base schema. The microservice application is deployed to a pool of application

servers implemented as an AWS autoscaling group.

Organizing Infrastructure | 169

Figure 9-5. Deployable parts of a microservice

The Terraform definition in Example 9-6 can be used to create a pool of application

servers running a microservice application. When it is run, parameters are passed in

giving it the name and version of the microservice to run, and the name of the envi‐

ronment to run it in. This single definition can be used multiple times to create mul‐

tiple microservices in multiple environments.

Terraform passes the contents of the user_data string to the new server instance

using the EC2 API. The AMI ami-12345678 has the cloud-init tool preinstalled. 5

Cloud-init automatically runs when a new server instance boots, examines the con‐

tents of the user_data string, and runs the /usr/local/sbin/microservice-bootstrap.sh

script, passing it the arguments environment, microservice_name, and microser

vice_version. The microservice-bootstrap.sh script is written by the infrastructure

team and is built into the AMI image as part of the template building process. This

script uses the microservice_name and microservice_version arguments to down‐

load and install the relevant microservice application package. It may also use the

environment argument to look up configuration parameters in a configuration

registry.

5 Cloud-init has become a standard tool; most stock server images for cloud platforms have it preinstalled and

configured to run at startup.

170 | Chapter 9: Patterns for Defining Infrastructure

Example 9-6. Terraform definition for a microservice autoscaling group

variable "microservice_name" {}

variable "microservice_version" {}

variable "environment" {}

resource "aws_launch_configuration" "abc" {

name = "abc_microservice"

image_id = "ami-12345678"

instance_type = "m1.small"

user_data = " #!/bin/bash

/usr/local/sbin/microservice-bootstrap.sh \

environment=${var.environment} \

microservice_name=${var.microservice_name} \

microservice_version=${var.microservice_version}"

}

resource "aws_autoscaling_group" "abc" {

availability_zones = ["us-east-1a", "us-east-1b", "us-east-1c"]

name = "abc_microservice"

max_size = 5

min_size = 2

launch_configuration = "${aws_launch_configuration.abc.name}"

}

Each microservice application can use this definition, or one similar to it, to define

how it is to be deployed in an environment. This definition doesn’t define the net‐

working infrastructure for the application. Although each application could define its

own AWS VPC, subnets, security groups, and so on, this duplication is potentially

excessive as the system grows. These elements should not need to change very often,

and should not be very different between applications. So this is a good candidate for

sharing. 6

Figure 9-6 shows the elements of an AWS infrastructure that might be managed in

their own global stack.

6 Sharing these kinds of network structures is also recommended by Amazon. See this presentation from Gary

Silverman for typical Amazon recommendations.

Organizing Infrastructure | 171

Figure 9-6. Global stack for microservices

This stack would have its own Terraform definition file, which is applied separately

for each environment. The IDs of the infrastructure elements provisioned by Terra‐

form will be recorded in a configuration registry.

Each microservice application then has its own Terraform definition file, similar to

the preceding example. The microservice infrastructure would also add an ELB to

route traffic to the autoscaling group, and an RDS definition to create a database

schema instance for the application. The definition would also reference the configu‐

ration registry to pull in the IDs for the subnets and security groups to assign the var‐

ious parts of the infrastructure to. The result would look like Figure 9-7.

172 | Chapter 9: Patterns for Defining Infrastructure

Figure 9-7. Microservice application stack

This architecture is appropriate for a set of microservices that don’t need to be segre‐

gated from one another. In other situations, segregation might be needed. For exam‐

ple, if a payment service involves handling credit card details, it would be subject to

PCI-DSS regulations. In this case, putting the payment service into its own global

stack makes it easier to keep it segregated. This can then be managed with more

tightly controlled processes to ensure and demonstrate compliance.

Organizing Infrastructure | 173

Reverse-Engineered Definitions Versus Build-Forward Ones

One popular feature for a definition tool is a way to point it at

existing infrastructure and automatically generate definition files.

This offers a quick way to start using a tool like Terraform, Cloud‐

Formation, or Heat for teams that already have extensive infra‐

structure in place.

The risk with this approach is that there is no guarantee the tool

will actually be able to rebuild the infrastructure if needed. There

may be aspects of the infrastructure that the tool did not detect, or

perhaps doesn’t even support.

The best way to have confidence in the ability to reliably rebuild

infrastructure is to “build forward.” That is, write the definition

files to match the existing infrastructure, and then run them to cre‐

ate new instances of the infrastructure. The new instances can be

tested to make sure they work correctly. Then, the old infrastruc‐

ture should be replaced by the newly built infrastructure.

If your team does not believe the old infrastructure can safely be

replaced by infrastructure that has been built from scratch using

the automated definition tools, then this is a sign of a snowflake or

even fragile infrastructure (“Fragile Infrastructure” on page 8).

Consider rebuilding elements of the legacy infrastructure using

infrastructure as code, one piece at a time, until the entire infra‐

structure can be easily and reliably rebuilt with confidence.

Automatically generating configuration definitions from existing

infrastructure can be useful for learning about infrastructure. Gen‐

erated definitions can even be used as a starting point for automati‐

cally built infrastructure. But don’t make the mistake of

considering them a useful recovery point for handcrafted infra‐

structure.

Running Definition Tools

Engineers can run definition tools from their local workstation or laptop to manage

infrastructure. But it’s better to ensure that infrastructure is provisioned and updated

by running tools from centrally managed systems, such as an orchestration agent. An

orchestration agent is a server that is used to execute tools for provisioning and

updating infrastructure. These are often controlled by a CI or CD server, as part of a

change management pipeline.

174 | Chapter 9: Patterns for Defining Infrastructure

There are a number of reasons to run definition tools from an agent:

• The agent server can itself be automatically built and configured, ensuring that it

can be reliably rebuilt in an emergency situation.

• It avoids relying on snowflake configuration for executing the tool, which often

happens when tools are installed and run on an engineer’s desktop.

• It avoids dependency on a particular person’s desktop.

• It makes it easier to control, log, and track what changes have been applied, by

whom, and when.

• It’s easier to automatically trigger the tool to be applied for a change manage‐

ment pipeline.

• It removes the need (or temptation) to keep credentials and tools for changing

infrastructure on a laptop, which could be lost or stolen.

Running a tool locally is fine for working with sandbox infrastructure (“Using the

Virtualization Platform for Sandboxes” on page 266) to develop, test, and debug auto‐

mation scripts and tooling. But any infrastructure used for important purposes,

including change management, should be run from centralized agents.

Conclusion

Part II of this book built on the technical concepts from Part I to outline patterns and

practices for using automation tooling effectively for infrastructure as code. It should

have provided clear guidance on good approaches, as well as pitfalls to avoid.

Part III will explore a variety of practices that can help to make this work. These will

delve into practices and techniques derived from software development, testing, and

change management.

Conclusion | 175

PART III

Practices

CHAPTER 10

Software Engineering Practices

for Infrastructure

The enabling idea of Infrastructure as Code is that the systems and devices used to

run software can be treated as if they, themselves, are software. This makes it possible

to use tools and working practices that have been proven in the software develop‐

ment world. This chapter examines specific software engineering practices that many

teams have found to work well for developing and maintaining infrastructure.

The main theme of the software engineering practices covered in this chapter is

building quality into the system. Quality is not a separate practice from development,

a testing activity that happens after a system has been built. Quality must be an inte‐

gral part of the way in which developers—including infrastructure developers—plan,

design, implement, and deliver systems.

Some of the principles that support quality in developing software and infrastructure

include:1

• Start delivering working, useful code early.

• Continue to deliver in small, useful increments.

• Build only what is necessary at the moment.

• Build each increment as simply as possible.

• Ensure each change is well designed and implemented.

1 These are inspired by the Agile Manifesto, particularly the Twelve Principles of Agile Software. Occasionally

people propose creating a manifesto for DevOps or Infrastructure as Code. However, the existing Agile Mani‐

festo applies just as well to developing infrastructure as it does to developing applications.

179

• Get feedback on every change as early as possible.

• Expect requirements will change as you and your users learn.

• Assume everything you deliver will need to change as the system evolves.

This chapter explains how to use practices from continuous integration (CI) and con‐

tinuous delivery (CD) to support these principles. It also looks at practices for using a

version control system (VCS), which is a prerequisite for both CI and CD.

Building on Software Engineering Practices

The remaining chapters in this book build on the core software

engineering practices from this one. Chapter 11 covers testing, in

particular how to design, implement, and maintain a well-balanced

suite of automated tests. Chapter 12 explains how a change man‐

agement pipeline, the core mechanism for CD, is used to put these

software engineering and testing practices into use. Chapter 13

outlines the workflows that people can use to work with the tools

on a day-to-day basis to develop, test, and debug automated infra‐

structure as code. Chapter 14 focuses on how dynamic infrastruc‐

ture creates new challenges and offers new techniques for keeping

services running reliably. Finally, Chapter 15 closes the book by

explaining how teams and organizations can build and run IT

operations using infrastructure as code.

Note for Experienced Software Developers

Experienced software developers who are experienced with agile

and Extreme Programming (XP) practices like test-driven develop‐

ment (TDD) and CI may find the contents of this chapter familiar.

Even so, it should be worth at least skimming the contents, as there

are some notes on how these specifically apply to infrastructure

development.

System Quality

Good software engineering practices produce high-quality code and systems. Too

often, quality is seen as a simple matter of functional correctness. In reality, high

quality is an enabler of change. The true measure of the quality of a system, and its

code, is how quickly and safely changes are made to it.

Poor-Quality Systems Are Difficult to Change

A seemingly simple change can take much more time than seems reasonable and

cause far more problems than it should. Even the people who wrote the code have

180 | Chapter 10: Software Engineering Practices for Infrastructure

difficulty understanding how a given part of the codebase works when looking at it.

Code that is difficult to understand is difficult to change without creating unexpected

problems. That simple change may require pulling apart large sections of code, which

can drag on and create even more of a mess. Users and managers are left puzzled and

frustrated by how ineffective the team seems.

The same is often true with infrastructure, even without automation. Different people

have built, changed, updated, optimized, and fixed various parts of the systems

involved over time. The whole interrelated web of parts can be precarious, any

change to one part can potentially break one or more others.

High-Quality Systems Are Easier and Safer to Change

Even someone new to the team can understand how any piece of it works when they

look into it. The impact of a change is generally clear. Tools and tests are in place that

quickly surface problems caused by a change.

Systems like this need only minimal technical documentation. Typically, most mem‐

bers of the team can quickly draw the parts of the system’s architecture that are rele‐

vant to a particular conversation. Newcomers with relevant technical knowledge are

brought up to speed by a combination of conversations, poking through the code,

and getting their hands dirty by working on the system.

Infrastructure Quality Through Code

Defining a system as infrastructure as code and building it with tools doesn’t make

the quality any better. At worst, it can complicate things. A mess of inconsistent,

poorly maintained definition files and tooling can be combined with ad hoc manual

interventions and special cases. The result is a fragile infrastructure where running

the wrong tool can do catastrophic damage.

What infrastructure as code does is shift the focus of quality to the definitions and

tooling systems. It is essential to structure and manage automation so that it has the

virtues of quality code: easy to understand, simple to change, with fast feedback from

problems. If the quality definitions and tools used to build and change infrastructure

is high, then the quality, reliability, and stability of the infrastructure itself should be

high.

Fast Feedback

A cornerstone of high-quality systems is fast feedback on changes. When I make a

mistake in a change to a configuration definition, I’d like to find out about that mis‐

take as quickly as possible.

The shorter the loop between making a change and being notified it causes a prob‐

lem, the easier it is to find the cause. If I know I made a mistake in the work I’ve done

System Quality | 181

over the past few minutes, I can find it quickly. If a problem crops up in a massive set

of changes I’ve spent a few weeks on, there is quite a lot of code to go through.

Ideally I’d like to be notified of my mistake before it’s been applied to an important

system, which is the goal of CI and CD. At worst, I’d like good monitoring to flag a

problem quickly after it’s been applied, so my teammates and I can resolve it with as

little damage as possible.

VCS for Infrastructure Management

As discussed in Chapter 1, a version control system (VCS) is a core part of an

infrastructure-as-code regime. A VCS provides traceability of changes, rollback, cor‐

relation of changes to different elements of the infrastructure, visibility, and can be

used to automatically trigger actions such as testing. This section will discuss some

software engineering practices around using a VCS.

What to Manage in a VCS

Put everything in version control that is needed to build and rebuild elements of your

infrastructure. Ideally, if your entire infrastructure were to disappear other than the

contents of version control, you could check everything out and run a few commands

to rebuild everything, probably pulling in backup data files as needed.

Some of the things that may be managed in VCS include:

• Configuration definitions (cookbooks, manifests, playbooks, etc.)

• Configuration files and templates

• Test code

• CI and CD job definitions

• Utility scripts

• Source code for compiled utilities and applications

• Documentation

Things that might not need to be managed in the VCS include the following:2

• Software artifacts should be stored in a repository (e.g., a Maven repository for

Java artifacts, an APT or YUM repository, etc.). These repositories should be

backed up or have scripts (in VCS) that can rebuild them.

2 Some of these reference “Types of Things on a Server” on page 105 in Chapter 6.

182 | Chapter 10: Software Engineering Practices for Infrastructure

• Software and other artifacts that are built from elements already in the VCS don’t

need to be added to the VCS themselves, if they can be reliably rebuilt from

source.

• Data managed by applications, logfiles, and the like don’t belong in VCS. They

should be stored, archived, and/or backed up as relevant. Chapter 14 covers this

in detail.

• Passwords and other security secrets should never (never!) be stored in a VCS.

Tools for managing encrypted keys and secrets in an automated infrastructure

should be used instead.

Continuous Integration (CI)

Continuous integration is the practice of frequently integrating and testing all changes to a system as they are being developed. CI tools, such as Bamboo, Jenkins, SnapCI,

TeamCity, TravisCI, and others, can be used to enable this practice.

However, it’s important to note that continuous integration is not the practice of

using a CI tool, but is rather the practice of frequently integrating and testing all

changes as they are made. All of the developers on a team commit their changes to

the trunk of the codebase. Every time a commit is made, the CI tool builds the code‐

base and runs an automated test suite.

This gives fast feedback when a change doesn’t build correctly, or when it causes a

test to fail. Because the tests are run on every commit, it’s immediately clear which set

of changes caused the issue. The more frequently developers commit, the smaller the

changeset is. The smaller a changeset is, the faster and easier it is to find and fix

problems.

Continuously Testing Branches Is Not Continuous Integration

Many development teams use a CI tool but don’t use it to continuously integrate and

test changes. Running the test suite on a schedule (e.g., nightly, or even hourly) gives

feedback on a slower loop than running it on every commit throughout the day.

Rather than continuously integrating changes, many development teams commit

changes to separate branches in their VCS. The goal is usually to allow people to

spend time finishing a large change before they worry about making it work with any

changes that other people are working on.3 However, as illustrated in Figure 10-1, the

3 Branching is also used to separate changes so they can be released separately. However, there are more effec‐

tive ways to do this, as discussed in Chapter 12 (“Practice: Prove Production Readiness for Every Change” on

page 237)

Continuous Integration (CI) | 183

more changes someone makes on a branch without merging, the more work will be

required to merge, test, debug, and fix the changes after merging. 4

Figure 10-1. Delaying merges builds up work

Although a CI tool can be used to run tests automatically on commits made to each

separate branch, the integrated changes are only tested together when the branches

are merged. Some teams find that this works well for them, generally by keeping

branches very short-lived.

With continuous integration, on the other hand, everyone commits their changes to

the same trunk, and tests are run against the fully integrated codebase. Conflicts are

found as soon as they are committed, which can save a great deal of work.

Figure 10-2 shows how this works, and Table 10-1 summarizes several common

branching strategies.

4 Paul Hammant has a good blog post on issues with branching.

184 | Chapter 10: Software Engineering Practices for Infrastructure

Figure 10-2. Merging every commit simplifies the process

Branching Fail

On one project, two of my colleagues were working on different aspects of the

authentication code of a system, each making their changes to a separate branch.

Although they did not actually change the same files, the changes turned out to be

incompatible. They only discovered the problem when they both committed their

changes, a few days before they were expected to deploy the new version of their sys‐

tem. Fixing it required ripping out and rewriting several weeks’ worth of changes.

If my colleagues had committed their changes to trunk rather than to branches, they

would have uncovered the issue much earlier, and saved a lot of time and effort.

The more frequently changes are committed to the shared trunk, the smaller they are,

the fewer conflicts will arise, the easier testing is, and the less there is to fix.

Table 10-1. Common branching strategies

Branching

Description

strategy

Feature

When a person or small group starts working on a change to the codebase, they can take a branch so they

branching

can work on it in isolation. This way, their work in progress is less likely to break something in production.

When the change is complete, the team merges their branch back into trunk.

Release

When a new release is deployed to production, a branch is taken to reflect the current version in

branching

production. Bugfixes are made on the release branch and merged to trunk. Work on the next release is

done on trunk.

Continuous

All work is done and committed to trunk. Continuous integration is used to ensure every commit is fully

integration

tested, and a continuous delivery pipeline can be used to ensure changes are only applied to production

after being fully validated.

Who Broke the Build?

In order for continuous integration to be effective, every failure of a build or test in

the CI system must be addressed immediately. Ignoring, or not noticing, when a

build fails allows errors to pile up, and becomes confusing and difficult to untangle

Continuous Integration (CI) | 185

later. So a failed run in the CI tool triggers a “stop the line” situation. Development

teams call this a broken build, or a red build.5

Nobody else in the team should commit any changes until the error is fixed, to make

it easier to resolve. When commits are added to a broken build, it can be difficult to

debug the original cause and untangle it from the following changes.

The person whose commit triggered the failure should prioritize fixing it. If the

change isn’t fixed quickly, then it should be reverted in VCS so the CI job can run

again and hopefully return to a green status.

Build Monitors

Teams need immediate visibility of the status of their CI jobs. It’s

common to use an information radiator (see “What Is An Informa‐

tion Radiator?” on page 88) in the team’s work area, and desktop

tools that show pop-up notifications when a build fails. Email isn’t

very effective for this, as it tends to get filtered and ignored. A bro‐

ken build needs to be a “red alert” that stops everyone until they

know who is working to fix it.

Because fixing broken builds immediately is so critical, avoid falling into the habit of

ignoring failing tests. If people become used to working when the build is red, the

team gets zero value from CI. Nobody will notice when there is a real problem, so

there will be no fast feedback loop.

Ignoring Tests That Fail

A related bad habit is disabling or commenting out tests that fail “for now” just to get

things moving. Fixing a failing test should be your immediate priority. Getting a par‐

ticular change released may be important, but your test suite is what gives you the

ability to release quickly. If you allow your tests to degrade, you are undermining

your ability to deliver.

Stamp out flaky tests: tests that routinely fail once, then pass when run another time.

Randomly failing tests condition the team to ignore red builds. People think “it’s

always red, just run it again.” Legitimate problems aren’t noticed right away, after

which you need to sift through the various commits to figure out where the real fail‐

ure came from.6

5 Martin Fowler quotes Kent Beck as saying, “Nobody has a higher priority task than fixing the build.”

6 Quarantining nondeterministic tests can be a useful strategy, if used in moderation. See Martin Fowler’s arti‐

cle, “Eradicating Non-Determinism in Tests”.

186 | Chapter 10: Software Engineering Practices for Infrastructure

Test-driven development (TDD) and self-testing code are essential for CI. Chapter 11

discusses using these practices to develop tests alongside the code and configuration

definitions that they test. Together, TDD and CI are a safety net that makes sure you

catch mistakes as you make them, rather than being bitten by them weeks later.

CI for Infrastructure

CI with infrastructure as code involves continuously testing changes made to defini‐

tion files, scripts, and other tooling and configuration written and maintained for

running the infrastructure. Each of these should be managed in a VCS. Teams should

avoid branching, to avoid building up an increasing “debt” of code that will need to

be merged and tested. Each commit should trigger some level of testing.

In Chapter 11, we’ll consider the test pyramid, which is a way of organizing different

layers of testing for the infrastructure and systems (see “Structuring the Test Suite:

The Test Pyramid” on page 198).

Continuous Delivery (CD)

Continuous integration addresses work done on a single codebase. Multiple develop‐

ers working on the same code continuously merge their work so that issues are

immediately surfaced and resolved. Continuous delivery7 expands the scope of this

continuous integration to the entire system, with all of its components.

The idea behind CD is to ensure that all of the deployable components, systems, and

infrastructure are continuously validated to ensure that they are production ready. It

is used to address the problems of the “integration phase.”

The Problem with the Integration Phase

With the integration phase approach, different people and/or teams work on their

piece of the project in isolation. Different applications and services are each built sep‐

arately. The final production infrastructure is a separate stream of work. There may

even be multiple streams of work for different parts of the infrastructure: database,

application servers, networking, and so on.

These pieces are only brought together and properly tested once they’re finished. The

idea behind this is that the interfaces between the pieces can be defined well enough

that everything will “just work.” This idea is proven wrong again and again. 8

7 Continuous Delivery, by Jez Humble and David Farley (Addison-Wesley), is the canonical resource on the

subject.

8 The LEGO integration game is a fun way to demonstrate the differences between late integration and continuous integration.

Continuous Delivery (CD) | 187

It’s critical that, throughout development, software is continuously deployed to test

environments that accurately reflect their final production deployment environment.

This deployment should be done in the exact same way in every environment, with

all of the same restrictions applying to the test environments that will apply to

production.

Carrying out frequent test deployments ensures that the deployment process is well

proven. If any changes are made to the application that will break deployment to pro‐

duction, they will break deployment to the test environment first. This means they

can be immediately fixed. Following this practice rigorously makes deployment to

production a trivial exercise.

The Twelve-Month Continuous Delivery Project

I worked on a project at a large enterprise that took twelve months before the first

release into production. We insisted on frequently deploying to a “controlled” envi‐

ronment, with production constraints, several times a weeks. We created an automa‐

ted process that was agreed to be suitable for production, including needing a human

to manually enter a password to confirm it was suitable.

Many people in the organization resisted this rigorous process. They thought it would

be fine to deploy to less restricted environments, where developers had full root

access and could make whatever configuration changes they needed to get their code

working. They found it frustrating that some of us insisted on stopping and fixing

failed deployments to the controlled environment—surely we could worry about that

later?

But we got the deployments working smoothly. When the release phase came, the

organization’s release management teams scheduled a six-week transition phase for

getting the “code complete” build ready for production release. The first step of this

plan called for the production support team to spend two weeks getting the software

installed on the pre-production environment, which would identify the work and

changes needed to make the software ready for production use.

The support team got the software deployed and working in pre-production in a few

hours, rather than two weeks. They decided that the work to prepare the production

environment would also be less than one day. They were delighted—they saved over

five weeks of work. Even better, fixes and improvements demanded by the business

after go-live could be whipped through the release process, and everyone was confi‐

dent the software was rock-solid.

Deployment Pipelines and Change Pipelines

Continuous delivery for software is implemented using a deployment pipeline. A

deployment pipeline is an automated manifestation of a release process. It builds the

188 | Chapter 10: Software Engineering Practices for Infrastructure

application code, and deploys and tests it on a series of environments before allowing

it to be deployed to production.

The same concept is applied to infrastructure changes. I use the term “change pipe‐

line” when talking about pipelines for infrastructure, to make it clear that I’m not just

talking about deploying application software.

A pipeline typically applies tests with increasing levels of complexity. The earlier

stages focus on faster and simpler tests, such as unit tests, and testing a single service.

Later stages cover broader sections of a system, and often replicate more of the com‐

plexities of production, such as integration with other services.

It’s important that the environments, tooling, and processes involved in applying

changes and deploying software are consistent across all of the stages of the pipeline.

This ensures that problems that might appear in production are discovered early.

Test environments should be locked down just like production. Allowing privileges

in test that aren’t allowed in production only paves the road to failed production

deployments. If production constraints make it hard to make changes as easily as

necessary in test environments, then either find deployment solutions that work

easily within those constraints, or find better ways to satisfy the goals of the con‐

straints.

At the organization I mentioned in my story (“The Twelve-Month Continuous Deliv‐

ery Project” on page 188), deploying to production required a sensitive password to

be manually entered. We created a mechanism so someone could enter the password

while triggering the deployment job in the Jenkins console. We automated this pro‐

cess for test stages where the password wasn’t needed, but the script and job ran the

exact same scripts. This allowed us to emulate the production constraint with a con‐

sistent, repeatable process.

This story illustrates that manual approvals can be incorporated into a CD process.

It’s entirely possible to accommodate governance processes that require human

involvement in making changes to sensitive infrastructure. The key is to ensure that

the human involvement is limited to reviewing and triggering a change to be applied.

The process that actually applies the change should be automated, and should be

exactly the same for each environment it is applied to.

Continuous Delivery Is Not Continuous Deployment

One misconception about CD is that it means every change committed is applied to

production immediately after passing automated tests. While some organizations

using continuous delivery do take this continuous deployment approach, most don’t.

The point of CD is not to apply every change to production immediately, but to

ensure that every change is ready to go to production.

Continuous Delivery (CD) | 189

There is still a decision about when to actually push a given change or release to pro‐

duction. This decision can be made by a human, but is then carried out by the tool‐

ing. It’s even possible to implement authorization and auditing of the decision

process.

The great thing about CD is that the decision to go live becomes a business decision,

not a technical one. The technical validation has already been done: it happens on

every commit.9

The act of rolling out a change to production is not a disruptive event. It doesn’t even

require the technical team to stop working on the next set of changes. It doesn’t need

a project plan, handover documentation, or a maintenance window. It just happens,

repeating a process that has been carried out and proven multiple times in testing

environments.

For infrastructure teams, continuous delivery means that changes

to infrastructure are comprehensively validated as they are made.

Changes needed by users, such as adding new servers to a produc‐

tion environment, can be made without involvement by the infra‐

structure team, because they already know exactly what will

happen when somebody clicks the button to add a new web server.

Code Quality

Over time, an infrastructure codebase grows and can become difficult to keep well

maintained. The same thing happens with software code, and so many of the same

principles and practices used by developers can be used by infrastructure teams.

Clean Code

In the past few years, there has been a renewed focus on “clean code”10 and software

craftsmanship, which is as relevant to infrastructure coders as to software developers.

Many people see a trade-off between pragmatism (i.e., getting things done) and engi‐

neering quality (i.e., building things right). This is a false dichotomy.

Poor-quality software, and poor-quality infrastructure, is difficult to maintain and

improve. Choosing to throw something up quickly, knowing it probably has prob‐

lems, leads to an unstable system, where problems are difficult to find and fix.

Adding or improving functionality on a spaghetti-code system is also hard, typically

9 Jez Humble has written an article about this, called “Continuous Delivery vs Continuous Deployment”.

10 See Robert “Uncle Bob” Martin’s Clean Code: A Handbook of Agile Software Craftsmanship (Prentice-Hall).

190 | Chapter 10: Software Engineering Practices for Infrastructure

taking surprisingly long to make what should be a simple change, and creating more

errors and instability.

Craftsmanship is about making sure that what you build works right, and ensuring

that loose ends are not left hanging. It means building systems that another professio‐

nal can quickly and easily understand. When you make a change to a cleanly built

system, you are confident that you understand what parts of the system the change

will affect.

Clean code and software craftsmanship are not an excuse for over-engineering. The

point is not to make things orderly to satisfy a compulsive need for structure. It isn’t

necessary to build a system that can handle every conceivable future scenario or

requirement.

Much the opposite. The key to a well-engineered system is simplicity. Build only

what you need, then it becomes easier to make sure what you have built is correct.

Reorganize code when doing so clearly adds value—for instance, when it makes the

work you’re currently doing easier and safer. Fix “broken windows” when you find

them.

Practice: Manage Technical Debt

Technical debt is a metaphor for problems in a system that have been left unfixed. As

with most financial debts, your system charges interest for technical debt. You might

have to pay interest in the form of ongoing manual workarounds needed to keep

things running. You may pay it as extra time taken to make changes that would be

simpler with a cleaner architecture. Or charges may take the form of unreliable or

hard-to-use services for your users.

Software craftsmanship is largely about avoiding technical debt. Make a habit of fix‐

ing problems and flaws as you discover them, which is preferably as you make them,

rather than falling into the bad habit of thinking it’s good enough for now.

This is a controversial view. Some people dislike technical debt as a metaphor for

poorly implemented systems, because it implies a deliberate, responsible decision,

like borrowing money to start a business. But it’s worth considering that there a dif‐

ferent types of debt. Implementing something badly is like taking a payday loan to

pay for a vacation: it runs a serious risk of bankrupting you. 11

11 Martin Fowler talks about the Technical Debt Quadrant, which distinguishes between deliberate versus inad‐

vertent technical debt, and reckless versus prudent technical debt.

Code Quality | 191

Managing Major Infrastructure Changes

The engineering practices recommended in this book are based on making one small

change at a time (see “Small Changes Rather Than Batches” on page 16). This can be

challenging when delivering large, potentially disruptive changes.

For example, how do you completely replace a key piece of infrastructure like a user

directory service? It may take weeks or even months to get the new service working

and fully tested. Swapping the old service out for a new one that isn’t working prop‐

erly would cause serious problems for your users and for you.

The key to delivering complex work in an agile way is to break it down into small

changes. Each change should be potentially useful, at least enough that someone can

try it out and see an effect, even if it’s not ready for production use.

I find it useful to think in terms of capabilities. Rather than defining a task like

“implement a monitoring check for SSH,” I try to define it in terms such as “make

sure we’ll be notified when SSHD is not available on a server.” For larger projects, a

team can define progress in terms of capabilities.

There are a number of techniques for incrementally building major changes to a pro‐

duction system. One is to make small, nondisruptive changes. Slowly replace the old

functionality, bit by bit. For example, Chapter 8 discussed implementing automated

server configuration incrementally. Choose one element of your servers and write a

manifest (or recipe, playbook, etc.) to manage that. Over time, you can add further

configuration elements piece by piece.

Another technique is to keep changes hidden from users. In the case of replacing a

user directory service, you can start building the new service and deploy it to produc‐

tion, but keep the old service running as well. You can test services that depend on it

selectively. Define a server role that uses the new user directory, and create some of

these servers in production that won’t be used for critical services, but which can be

tested. Select some candidate services that can be migrated to the new directory at

first, perhaps ones that are used by the infrastructure team but not by end users.

Table 10-2 summarizes some techniques for hiding unfinished changes in production

code.

192 | Chapter 10: Software Engineering Practices for Infrastructure

Table 10-2. Some techniques for deploying a system with changes that aren’t ready yet

Technique

Description

Feature hiding

Deploy the changed code, but don’t make it visible to users or systems. In many cases, this is simply a

matter of not configuring other systems to integrate with the new feature.

Feature toggles

Implement a configuration setting that turns the changed feature or code off in the production

environment.

Branch by

When replacing an existing component, deploy both the new and the old component. Use configuration,

abstraction

such as a feature toggle, so that the older version of the component is used in the production

environment, while enabling the newer version to be used in relevant test environments.

The important point is to make sure that any change that will take a while to imple‐

ment is continuously being tested out, during development.

Feature Toggles

Feature toggles12 are a technique for testing changes to an existing script. The new

changes are added with some conditional logic so that they’re only used when a con‐

figuration setting is “toggled.” For software or tools that use a configuration registry,

different environments can have the feature toggled on in test environments, and off

for production.

Clean Up Unused Toggles

A common problem with using feature toggles and similar techni‐

ques is that it complicates the codebase of the system. Over time,

this tends to accumulate a large amount of conditional code and

configuration options that aren’t needed any more.

It’s a trap to think that removing feature toggles is unnecessary

work, or that configuration options should be left in “just in case.”

These add complexity, increasing the time to understand the sys‐

tem and debug errors. Defects love to hide in code that people

assume isn’t used.

An optional feature that is no longer used, or whose development

has been stopped, is technical debt. It should be pruned ruthlessly.

Even if you decide later on that you need that code, it should be in

the history of the VCS. If, in the future, you want to go back and

dust it off, you’ve got it in the history in version control.

12 Using feature toggles effectively is a deep topic. My colleague Pete Hodgson covers many aspects of the sub‐

ject in an article. Ryan Breen has also written about experiences using feature toggles at scale.

Managing Major Infrastructure Changes | 193

Conclusion

This chapter reviewed some core software development practices and how they relate

to working with infrastructure as code. The underlying theme of these practices is

quality. In order to ensure the quality of systems and the code that defines them,

quality must be a first-order concern.

Teams that prioritize the quality of their systems, by getting continuous feedback and

acting on it immediately, create a virtuous cycle. They have the confidence to rou‐

tinely make the small fixes and tweaks that keep their systems humming smoothly.

This gives them additional time to spend on the more satisfying, higher-order work

rather than fighting fires.

The next chapter covers further specifics on automated testing.

194 | Chapter 10: Software Engineering Practices for Infrastructure

CHAPTER 11

Testing Infrastructure Changes

The previous chapter described how software engineering practices such as CI and

CD can be applied with infrastructure as code. A major theme of that chapter was

managing quality. This chapter drills into specifics of testing, especially automated

tests. Automated testing is essential to be able to continuously test changes to a sys‐

tem. But many teams find building and maintaining an automated test suite difficult

to sustain. This chapter looks at approaches used by teams who do manage to estab‐

lish and keep up automated testing regimes.

The purpose of testing is to help get work done quickly. Sadly, in many organizations

testing is seen as something that slows work down. There is a common misconcep‐

tion that quality and delivery speed are opposing forces that must be traded off, one

against the other. This mindset leads to the idea that automation can speed the deliv‐

ery process by making the act of testing a system go faster.

These misconceptions—testing as the enemy of delivery speed, and automation as a

silver bullet to make testing go faster—lead to expensive, failed test automation initia‐

tives.

The reality is that system quality is an enabler of delivery speed. Investing less time to

find and fix problems results in a fragile system. Fragile systems are difficult to

change, so changes are time consuming and risky.

The goal of automated testing is to help a team keep the quality of their system high

by identifying errors as soon as they are made so they can be immediately fixed. A

team with strong discipline around continuously testing and fixing is able to make

changes quickly and with confidence.

195

A strong, well-balanced automated testing regime leads to:

• Fewer errors discovered in production

• Faster fixes when errors are discovered

• The ability to make frequent changes and improvements

In other words, good testing results in faster delivery and higher quality.

The Agile Approach to Testing

Many organizations have a process that separates implementation and testing into

different phases of work, usually carried out by separate teams. Agile processes

encourage teams to integrate testing with implementation to shorten the feedback

loop (Figure 11-1). Testing takes place continuously, as changes are made. This is

done by testers and developers working closely together, combined with automated

testing.

Figure 11-1. The change-test-fix feedback loop

So the most useful goal for test automation isn’t to reduce the length of a project’s

testing phase, but to embed testing and fixing activities into the core workflow. As

someone works on a change to the system, whether it’s a change to application code

or to infrastructure definitions, they continuously test. They test to make sure their

change works as they expect. They test to make sure their change doesn’t break other

parts of the system. And they test to make sure they aren’t leaving any loose ends to

cause problems later on.

People test so they can fix each problem right away, while they’re still working on the

changes. Everything is still fresh in their mind. Because the scope of the changes are

very small, problems are quick to find and fix.

196 | Chapter 11: Testing Infrastructure Changes

Automating Tests for Fast Feedback

Teams whose testing process is based around separate implementation and test pha‐

ses often attempt to adopt automation by automating their test phase. This is often a

project owned by the QA team, which aims to create a comprehensive regression test

suite that replicates what they have been doing manually. There are several reasons

why these automation efforts tend to be disappointing.

One problem is that automated test suites built by a separate testing team tend to

focus on high-level testing. This is because tools marketed at test teams tend to be UI-

focused, because they are seen as replacing manual testing driven through the UI.

While UI level tests are an essential part of an automated test suite, they are more

expensive to develop, slower to run, and require more work to maintain as the sys‐

tems they test evolve. So a test suite needs to be well balanced. The test pyramid

described later in this chapter offers a model for designing a well-balanced test suite.

However, a key to successful test automation is for the entire team to be involved in

planning, designing, and implementing it, rather than making it the responsibility of

an isolated group.

The Pitfall of Big Bang Test Automation Projects

Initiatives to implement automated testing often bite off more than

they can chew. This leads to difficulties keeping up with ongoing

development, because the system is a constantly moving and

changing target. Before the massive test suite is complete, the sys‐

tem has changed. Once the test suite is built, the system will imme‐

diately change again. So tests tend to be constantly broken, and the

nirvana of a complete test suite is never achieved.

Aiming for the goal of a complete, finished test suite is doomed to

fail. Instead, the goal of an automation initiative should be to

embed the habit of continuously writing tests as a part of routine

changes and implementation work. So the outcome of an automa‐

ted testing initiative is not a completed test suite, but a set of work‐

ing habits and routines.

When automated testing has been successfully adopted by a team,

tests are written or updated whenever a change is made to the sys‐

tem. CI and CD regimes run the relevant tests for every change

continuously, as discussed in Chapter 10. The team responds

immediately to fix failing tests.

Organically Building a Test Suite

The way to start an initiative that results in good testing habits is not to attempt to

build a full test suite to cover the existing functionality. Instead, write tests for each

The Agile Approach to Testing | 197

new change as it comes up. When a bug is found, write a test that exposes that bug,

and then fix it. When a new feature or capability is needed, begin implementing tests

as you go, possibly even using test-driven development (TDD), as described later in

this chapter.

Building the test suite organically as a part of making routine changes forces every‐

one to learn the habits and skills of sustainable, continuous testing. Again, the out‐

come to aim for is not a “finished” test suite, but the routine of testing each change. A

test suite will emerge from this approach, almost as a by-product. Interestingly, the

test suite that emerges will be focused on the areas of the system that most need tests:

the ones that change and/or break the most.

Structuring the Test Suite: The Test Pyramid

Managing a test suite is challenging. The tests should run quickly, be easy to main‐

tain, and help people quickly zero in on the cause of failures. The testing pyramid is a

concept for thinking about how to balance different types of tests to achieve these

goals (Figure 11-2).

Figure 11-2. The test pyramid

The pyramid puts tests with a broader scope toward the top, and those with a narrow

scope at the bottom. The lower tiers validate smaller, individual things such as defini‐

tion files and scripts. The middle tiers test some of the lower-level elements together

—for example, by creating a running server. The highest tiers test working systems

together—for example, a service with multiple servers and their surrounding infra‐

structure.

There are more tests at the lower levels of the pyramid and fewer at the top. Because

the lower-level tests are smaller and more focused, they run very quickly. The higher-

level tests tend to be more involved, taking longer to set up and then run, so they run

slower.

198 | Chapter 11: Testing Infrastructure Changes

Avoiding an Unbalanced Test Suite

A common problem with automated test suites is the ice-cream cone, or inverted

pyramid, as seen in Figure 11-3. This happens when there are too many high-level

tests when compared with lower-level tests.

Figure 11-3. The inverted testing pyramid

A top-heavy test suite is difficult to maintain, slow to run, and doesn’t pinpoint

errors as well as a more balanced suite.

High-level tests tend to be brittle. One change in the system can break a large number

of tests, which can be more work to fix than the original change. This leads to the test

suite falling behind development, which means it can’t be run continuously.

Higher-level tests are also slower to run than the more focused lower-level tests,

which makes it impractical to run the full suite frequently. And because higher-level

tests cover a broad scope of code and components, when a test fails it may take a

while to track down and fix the cause.

This usually comes about when a team puts a UI-based test automation tool at the

core of their test automation strategy. This in turn often happens when testing is

treated as a separate function from building. Testers who aren’t involved in building

the system don’t have the visibility or involvement with the different layers of the

stack. This prevents them from developing lower-level tests and incorporating them

into the build and change process. For someone who only interacts with the system

as a black box, the UI is the easiest way to interact with it.

Structuring the Test Suite: The Test Pyramid | 199

Long Test Runs Are a Sign of an Unbalanced Test Suite

In order for CI and CD to be practical, the full test suite should run

every time someone commits a change. The committer should be

able to see the results of the test for their individual change in a

matter of minutes. Slow test suites make this difficult to do, which

often leads teams to decide to run the test suite periodically—every

few hours, or even nightly.

If running tests on every commit is too slow to be practical, the sol‐

ution is not to run the tests less often, but instead to fix the situa‐

tion so the test suite runs more quickly. This usually involves re-

balancing the test suite, reducing the number of long-running tests

and increasing the coverage of tests at the lower levels.

This in turn may require rearchitecting the system being tested to

be more modular and loosely coupled, so that individual compo‐

nents can be tested more quickly.

Practice: Test at the Lowest Level Possible

UI and other high-level tests should be kept to a minimum, and should only be run

after the lower level tests have run. An effective test suite runs a small number of end-

to-end journey tests, touching the major components of the system and proving that

integration works correctly. Specific features and functionality are tested at the com‐

ponent level, or through unit tests.

Whenever a higher-level test fails, or a bug is discovered, look for ways to catch the

issue at the lowest possible level of testing. This ensures that the error will be caught

more quickly and that it’s very clear exactly where the failure is. If an error can’t be

detected at the unit-test level, move up a layer of the stack and try to catch it there.

Essentially, a test at any level above a unit test should be testing an interaction that

only happens when the components at that level are integrated.

So if there is a problem in component A, then the test for that component should

catch it, rather than an integration test that runs across components A, B, and C.

Tests should fail when testing A, B, and C only when they have a found an error in

the way those components work together, even when each component is correct in

itself.

As an example, let’s say you discover that an application error happens because of an

error in a configuration file managed by Chef. Rather than testing whether the error

appears in the running application, you should write a test for the Chef recipe that

builds the configuration file.

Testing for the error in the UI would involve starting a VM, could require setting up

a database and other services, and then building and deploying the application built.

200 | Chapter 11: Testing Infrastructure Changes

A change that caused a problem in the application might cause dozens of tests to fail,

which makes it difficult to understand exactly what has gone wrong.

Instead, write a test that runs whenever the Chef recipe changes. The test can use a

tool like ChefSpec that can emulate what happens when Chef runs a recipe, without

needing to apply it to a server. This runs much more quickly, and when it fails there

is a very narrow area to look at to find the cause.

The ChefSpec example (Example 11-1) creates a Runner object, which is an emulator

for running the recipe. Each it ... do ... end block is an individual test, checking

that the template file has been created, or that it has the correct attributes. 1

Example 11-1. ChefSpec sample test

require 'chefspec'

describe 'creating the configuration file for login_service' do

let(:chef_run) { ChefSpec::Runner.new.converge('login_service_recipe') }

it 'creates the right file' do

expect(chef_run).to create_template('/etc/login_service.yml')

end

it 'gives the file the right attributes' do

expect(chef_run).to create_template('/etc/login_service.yml').with(

user: 'loginservice',

group: 'loginservice'

)

end

it 'sets the no_crash option'

expect(chef_run).to render_file('/etc/login_service.yml').

with_content('no_crash: true')

end

end

Practice: Only Implement the Layers You Need

The testing pyramid suggests that there should be tests at multiple integration levels

for every component. But which layers you implement will depend on the particular

system and its needs. It’s important to avoid over-complicating the test suite.

There is no formula for what types of tests should be used for an infrastructure code‐

base. It’s best to start out with fairly minimal tests, and then introduce new layers and

types of testing when there is a clear need.

1 Note that this example probably violates the recommendation later in this chapter to not write reflective tests

(“Anti-Pattern: Reflective Tests” on page 213).

Structuring the Test Suite: The Test Pyramid | 201

Practice: Prune the Test Suite Often

Maintaining an automated test suite can be a burden. It gets easier as a team becomes

more experienced, and writing and tweaking tests becomes routine. But there is a

tendency for the test suite to grow and grow. Writing new tests becomes a habit, so

teams need a corresponding habit of removing tests to keep the suite manageable. It’s

of course helpful to avoid implementing unnecessary tests in the first place.

Practice: Continuously Review Testing Effectiveness

The most effective automated testing regimes involve continuously reviewing and

improving the test suite. From time to time, you may need to go through and prune

tests; remove layers or groups of tests; add a new layer or type of tests; add, remove,

or replace tools; improve the way you manage tests; and so on.

Whenever there is a major issue in production or even in testing, consider running a

blameless post-mortem. One of the mitigations that should always be considered is

adding or changing tests, or even removing tests.

Some signs that you should consider revamping your tests:

• Do you spend more time fixing and maintaining certain tests than you save from

the problems they catch?

• Do you often find issues in production?

• Do you often find issues late in the process, such as when releasing?

• Do you spend too much time debugging and tracing failures in high-level tests?

Code Coverage for Infrastructure Unit Tests

Avoid the temptation to set targets for code coverage for infra‐

structure unit tests. Because configuration definitions tend to be

fairly simple, an infrastructure codebase may not have as many

unit tests as a software codebase might. Setting targets for unit test

coverage—a much-abused practice in the software development

world—will force the team to write and maintain useless test code,

which makes maintaining good automated testing much harder.

Implementing a Balanced Test Suite

There is a variety of tooling available to implement automated infrastructure testing.

In many cases, tools designed for software testing can be directly adopted and applied

to infrastructure. Some of these tools have been extended to add infrastructure-

202 | Chapter 11: Testing Infrastructure Changes

specific functionality. For example, Serverspec extends the RSpec Ruby-based testing

tool with features for checking server configuration.

Different tools may be needed for different types of testing at different levels of the

pyramid. It’s important to avoid getting hung up on the tooling. Avoid choosing a

tool and basing your testing strategy around it. Instead, analyze your systems and

components to decide how you need to approach testing them. Then find tools to

carry out your approach. As with any part of your infrastructure, assume that you

will change parts of your test tooling over time.

Figure 11-4 shows an example application, LoginService, which will be used through‐

out this chapter to illustrate the implementation of a balanced test suite. LoginService

uses two types of servers: a database server and an application server. Each server

type has a Puppet manifest to configure it, and a Packer template to build an AMI for

it. A CloudFormation definition file is used to define the surrounding infrastructure

for the service.

Figure 11-4. LoginService architecture

Figure 11-5 shows a test pyramid for the LoginService, giving a rough idea about lev‐

els of testing that may be appropriate.

Implementing a Balanced Test Suite | 203

Figure 11-5. An example service and its test pyramid

Low-Level Testing

The following sets of files are all managed in VCS:

• Application server Puppet manifest

• Database server Puppet manifest

• Application server Packer template

• Database server Packer template

• CloudFormation file

Each of these definition files is managed in a VCS and is independently testable.

When a change is committed, the CI server pulls the relevant files from the VCS and

runs some validation on it.

A change to either one of the Puppet manifests triggers some validation for the

manifest:

• Syntax checking

• Static analysis

• Unit testing

All of these tests can be run quickly, because they don’t have complex setup require‐

ments. They don’t require actually creating a server and applying the manifest. They

tend to find simple mistakes very quickly.

204 | Chapter 11: Testing Infrastructure Changes

Without this layer of tests, a simple syntax mistake might not be found until several

minutes have been spent creating a virtual machine and fully configuring it. And at

that point, tracing a problem down to the specific error can take a while. It’s much

nicer to have a quick check that immediately tells you about the error.

Syntax Checking

Many tools that use configuration definition files, including Puppet, Packer, and

CloudFormation, have a syntax checking mode that can be used to implement this

kind of check. In Example 11-2, the puppet command-line tool is being used to vali‐

date the appserver.pp file.

Example 11-2. Running Puppet’s syntax checking

$ puppet parser validate appserver.pp

Static Code Analysis

Static code analysis tools work by parsing code or definition files without executing

them. Lint is the archetypal static analysis tool, originally written to analyze C code.

Static code analysis tools are available for a growing number of infrastructure defini‐

tion file formats, like puppet-lint and Foodcritic for Chef.

Static analysis can be used to check for common errors and bad habits which, while

syntactically correct, can lead to bugs, security holes, performance issues, or just code

that is difficult to understand.

Many of the things that static analysis tools check for can seem trivial or pedantic.

But the most effective infrastructure and development teams tend to be rigorous

about good coding hygiene. Forcing yourself to change your coding habits to keep

definitions and scripts consistent and clean results in more reliable systems. Those

small bits of messy code and trivial bugs accumulate and create unreliable infrastruc‐

ture and services.

Unit Testing

A unit test in software code executes a small subsection of a program, on the order of

a one or two classes, to make sure that they run correctly. Most infrastructure tools

have some kind of unit testing tool or framework, such as rspec-puppet and Chef‐

Spec. Saltstack even comes with its own built-in unit testing support.

Tools like this allow a particular configuration definition to be run without actually

applying it to a server. They usually include functionality to emulate other parts of a

system well enough to check that the definition behaves correctly. This requires

ensuring that each of your definitions, scripts, and other low-level elements can be

Implementing a Balanced Test Suite | 205

independently executed. Restructuring things to make test isolation possible may be

challenging, but results in a cleaner design.

A pitfall with unit testing is that it can lead to reflective testing (as described in “Anti-

Pattern: Reflective Tests” on page 213). Don’t fall into the trap of thinking that you

must have unit tests covering every line of your configuration definitions. This idea

leads to a mass of brittle tests that are time consuming to maintain and have little

value for catching problems.

Mid-Level Testing

Once the quicker validation has been run, different pieces can be assembled and tes‐

ted together. For the LoginService example described earlier, this might involve

building an application server template using the Packer template and the Puppet

manifest. The validation process would be to create a server instance using the new

template, and then run some tests against it. Figure 11-6 shows how mid-level tests

for the application server role map to that part of the system architecture.

Figure 11-6. LoginServer components covered by application server tests

Example 11-3 shows a Serverspec snippet that tests whether there is a service named

login_service running.

Example 11-3. Serverspec to validate the login service is running

describe service('login_service') do

it { should be_running }

end

206 | Chapter 11: Testing Infrastructure Changes

The flow to set up and run this test (and presumably others) is illustrated in

Figure 11-7. At this point, each of the pieces involved in building the application

server template has been validated on its own. Tests at the middle level should not be

proving the correctness of the individual components, but rather should be proving

that they work correctly when integrated together.

For example, the Puppet manifest may make assumptions about packages that have

been installed by the base operating system. If someone updates the version of the

operating system in the template, the packages may change, which may cause prob‐

lems for the Puppet manifest. This level of testing is the first point where you can

catch this kind of error.

Other failures you would like to discover at this stage are those uncovered because

the system is now using an actual server instance, rather than having unit testing soft‐

ware emulate the environment the manifest is applied to.

Figure 11-7. Flow for testing the LoginService application server

Creating Test Infrastructure

Tests at this level will need to create test instances of the relevant infrastructure. For

the LoginService appserver test, this is a test server. But other tests may need to test

other things, such as networking configuration or data persistence. Scripts or defini‐

tions that manage network configuration will require the ability to stand up at least

emulated pieces of infrastructure.

This should be done using the same infrastructure platform technology used by the

things being tested. Cloud style infrastructure allows test tooling to draw from a pool

of resources, to spin up servers, networking elements, and so on, as needed. For

teams using a more limited set of resources (e.g., a set of physical hardware dedicated

to the project), this requires an investment to ensure there is enough capacity to run

this kind of testing.

Implementing a Balanced Test Suite | 207

Test infrastructure should be baselined before each test. If possible, new instances

should be provisioned from scratch, using the same definitions, tooling, and pro‐

cesses that are used to provision the infrastructure in production. The resources are

then disposed of after the test is complete. This requires the infrastructure provision‐

ing process to be quick so that the testing process doesn’t run overly long.

If testing happens on a fixed set of infrastructure, the instances should be cleared

down and reconfigured from scratch. This avoids situations where cruft builds up

across test runs, polluting the test environment.

Locally Virtualized Test Infrastructure

In more constrained environments, or just to optimize the time for testing, it’s often

useful to run tests on a locally virtualized environment like Vagrant, rather than on

the main infrastructure platform. If the CI agents that run tests are built in a way that

supports hosting virtual machines, then they can spin up local VMs to validate server

configuration.

The important criteria is how useful this is in actually catching problems quickly. In

many cases, a Vagrant box running the same OS, built and provisioned using the

same tools and definitions, is an accurate enough representation of a VM running on

the production infrastructure.

Don’t Get Hung Up on the Language

Teams often prefer testing tools written in the same language they

are using for their infrastructure management scripts and tooling.

This is sensible when people using the tool must write tests in that

same language. It can also be useful for writing extensions. For

example, knowing (or learning) Ruby is helpful when using RSpec-

based tools.

But the implementation language is less important when using

tools where tests are defined using a DSL that is more abstracted

from it. If the team doesn’t have much exposure to the underlying

language, it should be less of a consideration when choosing the

tool.

Tooling for Managing Test Infrastructure

There are a variety of tools that make it easier to automatically create server instan‐

ces, or other infrastructure context, for the purposes of testing. Test Kitchen is

designed to make it easy to manage test servers on different infrastructure platforms

in order to apply and test configuration. It was written specifically for Chef but is also

used for testing Puppet and other tools. Kitchen Puppet was written to support test‐

ing Puppet manifests with Test Kitchen.

208 | Chapter 11: Testing Infrastructure Changes

Higher-Level Tests

The higher levels of the test suite involve testing that multiple elements of the infra‐

structure work correctly when integrated together. This is illustrated in Figure 11-8.

End-to-end testing for a particular service integrates all of the elements needed to

deliver that service. This potentially includes integrating external systems as well.

Figure 11-8. LoginServer components covered by high level tests

The considerations for testing at this level are similar to those for testing at the mid‐

dle tiers. For example, a test instance of the relevant infrastructure needs to be provi‐

sioned, preferably by building it from scratch, or at least reliably setting it to a

baseline, before applying the configuration.

For higher-level infrastructure, it becomes more difficult to emulate the infrastruc‐

ture without using the same infrastructure platform as production. In any case, this is

typically the point where accurately reproducing production infrastructure becomes

essential, because this is probably the last stage of testing to be carried out before

production.

This level of testing doesn’t tend to need much special tooling that isn’t already used

elsewhere. The infrastructure should be provisioned using the same tooling and

definitions that are used for the production infrastructure. Testing can often be car‐

ried out using a mix of tools as appropriate. The types of tools used for mid-level vali‐

dation, like Serverspec, are often appropriate here. Simple scripts using curl can

validate that connectivity works correctly.

Implementing a Balanced Test Suite | 209

In some cases, it may be useful to use general-purpose behavior-driven development

(BDD2) and UI testing tools.3 This type of testing is particularly useful to test more

complex interactions involving a web UI.

Because this tier of testing is the slowest to set up and run, it’s crucial to keep the tests

rigorously pruned. Tests at this level should be the minimum needed to find prob‐

lems that can’t be found through lower level testing.

Example 11-4 uses a Serverspec that will be executed from the application server. It

proves that the database server is reachable from the application server. This will

catch any errors with the firewall rule configuration.

Example 11-4. Serverspec to validate connectivity

describe host('dbserver') do

it { should be_reachable.with( :port => 5432 ) }

end

Securely Connecting to a Server to Run Tests

Automatically tests that remotely logging into a server can be chal‐

lenging to implement securely. These tests either need a hard-

coded password, or else an SSH key or similar mechanism that

authorizes unattended logins.

One approach to mitigate this is to have tests execute on the test

server and push their results to a central server. This could be com‐

bined with monitoring, so that servers can self-test and trigger an

alert if they fail.

Another approach is to generate one-off authentication credentials

when launching a server to test. This requires support in the infra‐

structure platform—for example, the ability to assign an SSH key

to a server instance when creating it. The automated test script

would generate a new key, apply it when spinning up a test server,

and then use it to log in and run tests. The credentials never need

to be shared or stored. If they are compromised, they don’t give

access to any other servers.

2 See behavior-driven development.

3 Such as Selenium.

210 | Chapter 11: Testing Infrastructure Changes

Testing Operational Quality

People managing projects to develop and deploy software have a bucket of require‐

ments they call non-functional requirements, or NFRs; these are also sometimes

referred to as cross-functional requirements (CFRs). Performance, availability, and

security tend to be swept into this bucket.

NFRs related to infrastructure can be labeled operational qualities for convenience.

These are things that can’t easily be described using functional terms: take an action

or see a result. Operational requirements are only apparent to users and stakeholders

when they go wrong. If the system is slow, flaky, or compromised by attackers, people

notice.

Automated testing is essential to ensuring operational requirements. Every time a

change is made to a system or its infrastructure, it’s important to prove that the

change won’t cause operational problems. The team should have targets and thresh‐

olds defined which it can write tests against.

Operational testing can take place at multiple tiers of the testing pyramid, although

the results at the top tiers are the most important. These tests measure and validate

performance, security, and other characteristics of the system when all of the pieces

are in place end to end. So this is the level where operational targets are normally set.

However, it can be useful to have operational quality tests at lower levels of the pyra‐

mid. Care should be taken to avoid complicating the test suite with low value tests.

But when some parts of the system tend to be the weak link in delivering the right

level of operational quality, it can be useful to push testing down to that level.

For example, if a particular application tends to be the slowest part of the end-to-end

system, putting application-level tests around it can be useful. Components that the

sluggish application integrates with can be mocked or stubbed (as in “Techniques to

Isolate Components for Testing” on page 213) so the performance of the application

can be measured on its own.

Automated security tests can take the form of static analysis tools that look for com‐

mon programming errors that lead to vulnerabilities. They can also check for ver‐

sions of packages or libraries that have known vulnerabilities. There are many tools

available for scanning systems and infrastructure for security issues,4 many of which

can be automated and made part of a regular testing suite.

4 A few examples include BDD-Security, Burp Suite, Gauntlt, Vega, and ZAP.

Implementing a Balanced Test Suite | 211

Monitoring as Testing

There is a close relationship between monitoring and automated testing, both of

which are ways of detecting problems with a system. Testing is aimed at detecting

problems when making changes, before they are applied to production systems.

Monitoring is aimed at detecting problems in running systems. Chapter 14 explores

ways of combining testing and monitoring in more detail (“Continuous Monitoring

through the Pipeline” on page 296).

Managing Test Code

The tooling for writing and running tests should be treated the same as everything

else in the infrastructure. Team members need to apply the same time, effort, and

discipline to maintaining high-quality test code and systems.

It should be possible to configure testing agents or software in a way that is repeata‐

ble, reproducible, transparent, and has all of the other qualities expected with infra‐

structure as code.

“Version All the Things” on page 15 applies to tests just as it applies to infrastructure

definitions. Tests should be stored in an externalized format that can be committed

to a VCS, rather than hidden inside a proprietary black-box tool. This way, a change

to a test can automatically trigger a test run in CI, proving that it works.

Practice: Keep Test Code with the Code It Tests

Tests should be managed together with the code of the thing they test. This means

putting them together in your VCS, and promoting them together through your

pipeline until they reach the stage where they’re run. This avoids a mismatch of test

to code.

For example, if you write some tests to validate a Chef cookbook, they may need to

change when there’s a change to the cookbook. If the tests are stored separately, you

may end up running an older or newer version of the tests against a different version

of the cookbook. This leads to confusion and flaky builds, because it’s unclear

whether there is really an error in the cookbook or just a test mismatch.

A variation of this is to keep them in the same VCS, but to package and promote

them separately. Version numbers can be used to correlate tests. For example, play‐

books might be packaged as app-server-config-2.101.rpm, and the corresponding tests

packaged as app-server-tests-2.101.tgz. This helps ensure the correct version of tests

are always used, without needing to include test scripts in the configuration package.

212 | Chapter 11: Testing Infrastructure Changes

Anti-Pattern: Reflective Tests

A pitfall with low-level infrastructure tests is writing tests that simply restate the con‐

figuration definitions. Example 11-5 is a Chef snippet that creates the configuration

file from the earlier test example.

Example 11-5. Simple definition to be tested

file '/etc/login_service.yml'

owner ourapp

group ourapp

end

Example 11-6 is a snippet from the earlier ChefSpec unit test example.

Example 11-6. Test that the definition created the file

describe 'creating the configuration file for login_service' do

# ...

it 'gives the file the right attributes' do

expect(chef_run).to create_template('/etc/login_service.yml').with(

user: 'ourapp',

group: 'ourapp'

)

end

This test only restates the definition. The only thing it proves is whether the Chef

developers have correctly implemented the file resource implementation, rather

than proving anything useful about what you’ve written yourself. If you’re in the

habit of writing this kind of test, you will end up with quite a few of them, and you’ll

waste a lot of effort editing every piece of configuration twice: once for the definition,

once for the test.

As a rule, only write a test when there’s some complexity to the logic that you want to

validate. For the configuration file example, it may be worth writing that simple test if

there is some complex logic that means the file may or may not be created.

For example, maybe login_service doesn’t need a configuration file in most envi‐

ronments, so you only create the file in a few environments where the default config‐

uration values need to be overridden. In this case, you would probably have two unit

tests: one that ensures the file is created when it should be, and another that ensures it

isn’t created when it shouldn’t be.

Techniques to Isolate Components for Testing

In order to effectively test a component, it must be isolated from any dependencies

during the test.

Managing Test Code | 213

As an example, consider testing an nginx web server’s configuration.5 The web server

proxies requests to an application server. However, it would be nice to test the web

server configuration without needing to start up an application server, which would

need the application deployed to it, which in turn needs a database server, which in

turn needs data schema and data. Not only does all of this make it complex to set up a

test just to check the nginx configuration, there are many potential sources of error

aside from the configuration being tested.

A solution to this is to use a stub server instead of the application server. This is a

simple process that listens on the same port as the application server and gives

responses needed for the tests. This stub could be a simple custom application that is

deployed just for the test—for example, a Ruby Sinatra web app. It could also be

another nginx instance or a simple HTTP server written in the infrastructure team’s

favorite scripting language.

It’s important for the stub server to be simple to maintain and use. It only needs to

return responses specific to the tests you write. For example, one test can check that

requests to /ourapp/home returns an HTTP 200 response, so the stub server handles

this path. Another test might check that, when the application server returns a 500

error, the nginx server returns the correct error page. So the stub might answer a spe‐

cial path like /ourapp/500-error with a 500 error. A third test might check that nginx

copes gracefully when the application server is completely down, so this test is run

without the stub in place.

A server stub should be quickly started, with minimum infrastructure required. This

enables running it in complete isolation as part of a larger test suite.

Test Doubles

Mocks, fakes, and stubs are all types of “test doubles.” A test double replaces a

dependency needed by a component or service being tested, to simplify testing. These

terms tend to be used in different ways by different people, but I’ve found the defini‐

tions used by Gerard Meszaros in his xUnit patterns book to be useful.6

5 This example was inspired by Philip Potter’s blog post about testing web server configuration at GDS (UK

Government Digital Services).

6 Martin Fowler’s bliki Mocks Aren’t Stubs is a useful reference to test doubles and is where I learned about

Gerard Meszaros’ book.

214 | Chapter 11: Testing Infrastructure Changes

Refactoring Components so They Can Be Isolated

Oftentimes, a particular component can’t be easily isolated. Dependencies to other

components may be hardcoded or simply too messy to pull apart. One of the benefits

of writing tests while designing and building systems, rather than afterward, is that it

forces you to improve your designs. A component that is difficult to test in isolation

is a symptom of design issues. A well-designed system should have loosely coupled

components.

So when you run across components that are difficult to isolate, you should fix the

design. This may be difficult. Components may need to be completely rewritten,

libraries, tools, and applications may need to be replaced. As the saying goes, this is a

feature, not a bug. In order to make a system testable, it needs a clean design.

There are a number of strategies for restructuring systems. Refactoring7 is an

approach that prioritizes keeping the system fully working throughout the process of

restructuring the internal design of a system.

Managing External Dependencies

It’s common to depend on services not managed by your own team. Some elements

of the infrastructure, such as DNS, authentication services, or email servers, may be

provided by a separate team or an external vendor. These can be a challenge for auto‐

mated testing, for a number of reasons:

• They may not be able to handle the load generated by continuous testing, not to

mention performance testing.

• They can have availability issues that affect your own tests. This is especially

common when vendors or teams provide test instances of their services.

• There may be costs or request limits that make them impractical to use for con‐

tinuous testing.

Test doubles can be used to stand in for external services for most testing. Your test

suite can first run tests with the system using test doubles. Only after these tests have

passed should the test suite move on to test integration with external services. This

way, if a test fails with the integrated systems, the correctness of your own code has

already been proven. So you can be sure the test failure is caused either by problem

with the other service, or with the way you’ve integrated with it.

7 Martin Fowler has written about refactoring as well as other patterns and techniques for improving system architecture. The Strangler Application is a popular approach I’ve seen on a number of projects.

Managing Test Code | 215

You should ensure that, if an external service does fail, it’s very clear that this is the

issue. Any integrations with third parties, and even those between your own services,

should implement checking and reporting that makes it immediately visible when

there is an issue. This should be made visible through monitoring and information

radiators for all environments. In many cases, teams implement separate tests and

monitoring checks that report on connectivity with upstream services.

Wasted Time

I recall spending over a week with one team, poring over our application and infra‐

structure code to diagnose an intermittent test failure. It turned out that we were hit‐

ting a request limit in our cloud vendor’s API. It’s frustrating to waste so much time

on something that could have been caught much more quickly.

Test Setup

By now you may be tired of hearing about the importance of consistency, reproduci‐

bility, and repeatability. If so, brace yourself: these things are essential for automated

testing. Tests that behave inconsistently have no value. So a key part of automated

testing is ensuring the consistent setup of environments and data.

For tests that involve setting up infrastructure—building and validating a VM, for

example—the infrastructure automation actually lends itself to repeatability and con‐

sistency. The challenge comes with state. What does a given test assume about data?

What does it assume about configuration that has already been done to the environ‐

ment?

A general principle of automated testing is that each test should be independent, and

should ensure the starting state it needs. It should be possible to run tests in any

order, and to run any test by itself, and always get the same results.

So it’s not a good idea to write a test that assumes another test has already been run.

For example, Example 11-7 shows two tests. The first tests the installation of nginx

on the web server, the second tests that the home page loads with expected content.

Example 11-7. Tests that are too tightly coupled

describe 'install and configure web server' do

let(:chef_run) { ChefSpec::SoloRunner.converge(nginx_configuration_recipe) }

it 'installs nginx' do

expect(chef_run).to install_package('nginx')

end

end

216 | Chapter 11: Testing Infrastructure Changes

describe 'home page is working' do

let(:chef_run) { ChefSpec::SoloRunner.converge(home_page_deployment_recipe) }

it 'loads correctly' do

response = Net::HTTP.new('localhost',80).get('/')

expect(response.body).to include('Welcome to the home page')

end

end

This example looks reasonable at a glance, but if the 'home page is working' test is

run on its own, it will fail, because there will be no web server to respond to the

request.

You could ensure that the tests always run in the same order, but this will make the

test suite overly brittle. If you change the way you install and configure the web

server, you may need to make changes to many other tests which make assumptions

about what has happened before they run. It’s much better to make each test self-

contained, as in Example 11-8.

Example 11-8. Decoupled tests

describe 'install and configure web server' do

let(:chef_run) { ChefSpec::SoloRunner.converge(nginx_configuration_recipe) }

it 'installs nginx' do

expect(chef_run).to install_package('nginx')

end

end

describe 'home page is working' do

let(:chef_run) {

ChefSpec::SoloRunner.converge(nginx_configuration_recipe,

home_page_deployment_recipe)

}

it 'loads correctly' do

response = Net::HTTP.new('localhost',80).get('/')

expect(response.body).to include('Welcome to the home page')

end

end

In this example, the second spec’s dependencies are explicit; you can see that it

depends on the nginx configuration. It’s also self-contained—either of these tests can

be run on their own, or in any order, with the same result every time.

Managing Test Data

Some tests rely on data, especially those that test applications or services. As an exam‐

ple, in order to test a monitoring service, a test instance of the monitoring server may

Managing Test Code | 217

be created. Various tests may add and remove alerts to the instance, and emulate sit‐

uations that trigger alerts. This requires thought and care to ensure tests can be run

repeatably in any order.

For example, you might write a test that adds an alert and then verifies that it’s in the

system. If this test runs twice on the same test instance, it may try to add the same

alert a second time. Depending on the monitoring service, the attempt to add a dupli‐

cate alert may fail. Or, the test may fail because it finds two alerts with the same

name. Or the second attempt to add the alert may not actually work, but the valida‐

tion finds the alert added the first time, so does not tell you about a failure.

So some rules for test data:

• Each test should create the data it needs.

• Each test should either clean up its data afterward, or else create unique data each

time it runs.

• Tests should never make assumptions about what data does or doesn’t exist

when it starts.

Persistent test environments tend to drift over time, so that they’re no longer consis‐

tent with production. Immutable servers (as described in “Patterns and Practices for

Immutable Servers” on page 143) help ensure a clean and consistent test environ‐

ment for every test run.

Roles and Workflow for Testing

Infrastructure teams tend to find testing a challenge. The typical system administra‐

tor’s QA process is as follows:

1. Make a change

2. Do some ad hoc testing (if there’s time)

3. Keep an eye on it for a little while afterward

On the flip side, not many testers understand infrastructure very well. As a result,

most infrastructure testing tends to be superficial.

One of the big wins of agile software development was breaking down the silos

between developers and testers. Rather than making quality the responsibility of a

separate team, developers and testers share ownership. Rather than allocating a large

block of time to test the system when it’s almost done, agile teams start testing when

they start coding.

There is still controversy over what the role of a quality analyst (QA) or tester should

be, even within an agile team. Some teams have decided that, because developers

218 | Chapter 11: Testing Infrastructure Changes

write their own automated tests, there is no need for a separate role. Personally, I find

that even in a highly functioning team, QAs bring a valuable perspective, expertise,

and a talent for discovering the gaps and holes in what I build.

There are some guidelines for how to manage testing with a team.

Principle: People Should Write Tests for What They Build

Having a separate person or team write automated tests has several negative effects.

The first one is that delivering tested work takes longer. There is delay in handing

over the code, then a loop while the testers work out what the code should do, write

the tests, and then try to understand whether test failures are because they’ve gotten

the test wrong, because of an error in the code, or a problem with the way the work

was defined. If the developer has moved on to another task, this creates a constant

stream of interruptions.

If a team does have people who specialize in writing automated tests, they should

work with the developers to write the tests. They could pair8 with the developer for

the testing phase of work, so the developer doesn’t move on to something else but

stays with the work until the tests are written and the code is right. But it’s better still

if they pair during development, writing and running the tests while writing the code.

The goal should be to help the developers become self-sufficient, able to write auto‐

mated tests themselves. The specialist may carry on working with the team, reviewing

test code, helping to find and improve testing tools, and generally championing good

practice. Or they may move on to help other teams.

The Test-Writing Habit

Many teams struggle to make writing tests a routine habit. It’s a lot like exercising, in

that it’s unpleasant to do when you aren’t used to it. It’s easy to find excuses to skip

doing it, promising yourself you’ll make up for it later. But if you push yourself to do

it, over time it becomes easier. Eventually, the habit becomes embedded enough that

you feel uncomfortable writing code or configuring systems without writing tests.

Principle: Everyone Should Have Access to the Testing Tools

Some automated testing tools have expensive per-user licensing models. Typically,

this means only a certain few individuals are able to write and run tests with the tool,

because buying licenses for everyone on the team is too expensive. The problem with

this is that it creates longer feedback loops.

8 For more on pair programming, see the XP website. Martin Fowler has also written about the topic in his article “Pair Programming Misconceptions” .

Roles and Workflow for Testing | 219

If the people writing and fixing code aren’t able to run and observe tests themselves,

it takes more time to reproduce and debug failures. The engineer must reproduce and

fix the error blindly, without being able to run the failing test. This leads to a few

rounds of “fixed it,” “still fails,” “how about now?”, “that broke something else,” and

so on.

There are many powerful test automation tools, with large communities of free and

commercial support, which are either free or cheap enough to be used without

adding waste and pain to the delivery process.9

The Value of a Quality Analyst

A person with deep expertise and enthusiasm for quality assurance is a huge asset to

any engineering team. They often act as a champion for testing practices. They help

people to think about work that is being planned or discussed.

Team members should consider how to define each task so that it’s clear where it

begins and ends and how to know that it’s been done correctly. Surprisingly often,

simply having this conversation before starting the work saves an enormous amount

of time and wasted effort.

Some quality engineers have expertise with automated testing tools. Their skills are

best harnessed by teaching, coaching, and supporting the other team members in

using these tools. It’s important to avoid the trap of letting this expert do all of the

work of writing the tests. This risks becoming a test silo and leaves the team disen‐

gaged from their own work.

Another strength that many testers bring is a talent for exploratory testing. These

people can take any system and immediately discover the gaps and holes.

9 A few examples include Cucumber, RSpec, and Selenium.

220 | Chapter 11: Testing Infrastructure Changes

The Three Amigos Conversation

Many agile teams find it useful to have a “three amigos” conversation10 before starting

on an item of work. This involves the person doing the work, the stakeholder who has

requested the work (the “product owner” in agile parlance), and the person who will

test it. This is a useful way to make sure everyone understands what is expected from

the work, and to clarify any questions. This same group also meets once the item is

complete, to review it, identify any tweaks or fixes needed, and then sign it off.

It’s important that this be a conversation, rather than documentation or a request sys‐

tem ticket. Documentation and tickets become formalities to get out of the way,

rather than a meaningful human interaction.

It should also be noted that the scope of the three amigos conversation is a small

piece of work (what developers call a “story”), that will take at most a few days to

complete. Larger chunks of work also need conversations, but the three amigos con‐

versations are specific and targeted.

Test-Driven Development (TDD)

Test-driven development, or TDD, is a core practice of Extreme Programming. 11 The idea is that, because writing tests can improve the design of what you build, you

should write the test before you write the code you test. The classic working rhythm

is red-green-refactor:12

Red Write a test for the next change you want to make, run the test, and see that it

fails.

Green Implement and test the definitions until the test passes.

Refactor

Improve the new and old definitions to make it well structured.

10 More on the Three Amigos pattern can be found in a talk by George Dinwiddie.

11 Extreme Programming, sometimes referred to simply as XP, is one of the more popular agile development

methodologies. It focuses on involving the users of a system in the process of building it, and continuous test‐

ing and reviews of work. The premise of the name is that, because testing and user involvement are useful,

they should be done more intensively than previous methodologies.

12 See “Red-Green-Refactor” .

Roles and Workflow for Testing | 221

Writing the test first forces you to think about the code you’re about to write. What

should it do and how will you know it works? What are the inputs and outputs?

What errors could happen, and how should they be handled? Once you’ve got a clear

test, implementing the changes to make the test pass should be easy.

Running the test before writing the code proves that it’s a valid test. If the test passes

before you’ve implemented the change, then clearly you need to rethink your test.

“Refactoring” is making changes to improve existing code without changing the

behavior. This is an important technique for improving code quality, and automated

tests are a safety net that assure you that you haven’t accidentally broken working

code.

Take It One Test at a Time

I once met a team that was struggling to get started with TDD, because they thought

they needed to write all of the tests for a component before they started coding the

system itself. TDD is not about switching around the phases of a waterfall. It is about

writing tests and code together, one small piece at a time.

Conclusion

Automated testing is possibly the most challenging aspect of infrastructure as code,

while also being the most important for supporting a reliable and adaptable infra‐

structure. Teams should incorporate testing habits into their routine. The next chap‐

ter explains how to create change management pipelines to support these habits.

222 | Chapter 11: Testing Infrastructure Changes

CHAPTER 12

Change Management Pipelines

for Infrastructure

Previous chapters have discussed the use of continuous integration (CI) to automati‐

cally test changes to scripts, tools, and configuration definitions, as they are commit‐

ted to source control. They have also mentioned continuous delivery (CD), which

builds on this to provide assurance that all of the elements of a system work correctly

after a change.

This chapter explains how to implement continuous delivery for infrastructure by

building a change management pipeline.

A deployment pipeline1 is used in CD to manage the deployment and testing of soft‐

ware to a series of validation stages whenever there is a change to the codebase. The

validations ensure that the codebase is production ready and that it will deploy cor‐

rectly and reliably. The same automated process is used to deploy and configure the

software in each environment, including production, to prevent the classic “worked

in test; failed in live” issues that arise from inconsistencies and manual processes.

The point of CD and the software deployment pipeline is to allow changes to be

delivered in a continuous flow, rather than in large batches. Changes can be validated

more thoroughly, not only because they are applied with an automated process, but

also because changes are tested when they are small, and because they are tested

1 Jez Humble and David Farley explained the idea of a deployment pipeline in their book Continuous Delivery

(Addison-Wesley), building on experiences from a ThoughtWorks client project. Humble defines a deploy‐

ment pipeline as an “automated manifestation of your process for getting software from version control into

the hands of your users”.

223

immediately after being committed. The result, when done well, is that changes can

be made more frequently, more rapidly, and more reliably.

Continuous Change Management

Continuous delivery for infrastructure could be characterized as continuous change

management or continuous provisioning. The point is to create a process that is opti‐

mized to quickly and rigorously validate a continuous flow of small changes. 2

An infrastructure change management pipeline is no different from a software

deployment pipeline. Many people use the term “deployment pipeline” for pipelines

that apply infrastructure changes. I like to use the term “change management pipe‐

line” just to emphasize its relevance to infrastructure. A software deployment pipe‐

line has been described as the automated manifestation of your software release

process. 3 A change management pipeline could be described as the automated mani‐

festation of your infrastructure change management process.

A change management pipeline works by:

• Immediately and thoroughly testing each change to prove whether it is produc‐

tion ready.

• Testing the elements of the system affected by a change progressively. This aligns

with the test pyramid discussed in the previous chapter.

• Enabling manual validation activities, like exploratory testing, user acceptance

testing (UAT), and approvals, where appropriate.

• Applying changes to production systems easily, quickly, and with low risk and

impact. This happens by making sure that the process for applying the changes is

fully automated and works the same way in all environments.

2 The idea of continuous change management, and how it relates to governance and controls, is explored more

in Chapter 15 (“Governance through Continuous Change Management” on page 322).

3 I’ve paraphrased Jez Humble from “Continuous Delivery: Anatomy of the Deployment Pipeline”

224 | Chapter 12: Change Management Pipelines for Infrastructure

Pipelines with Human Oversight

Many people assume that because an automated pipeline is trig‐

gered whenever a change is committed to the codebase, changes

will be automatically rolled out to production without human

intervention. Although some organizations do implement their

pipelines this way, most have at least one stage in their pipeline

that is manually triggered. Often, multiple changes are committed

and validated in the pipeline before being applied to production.

Benefits of a Change Management Pipeline

Teams who embrace the pipeline as the way to manage changes to their infrastruc‐

ture find a number of benefits:

• Their infrastructure management tooling and codebase is always production

ready. There is never a situation where extra work is needed (e.g., merging,

regression testing, and “hardening”) to take work live.

• Delivering changes is nearly painless. Once a change has passed the technical val‐

idation stages of the pipeline, it shouldn’t need technical attention to carry

through to production unless there is a problem. There is no need to make tech‐

nical decisions about how to apply a change to production, as those decisions

have been made, implemented, and tested in earlier stages.

• It’s easier to make changes through the pipeline than any other way. Hacking a

change manually—other than to bring up a system that is down—is more work,

and scarier, than just pushing it through the pipeline.

• Compliance and governance are easy. The scripts, tools, and configuration for

making changes are transparent to reviewers. Logs can be audited to prove what

changes were made, when, and by whom. With an automated change manage‐

ment pipeline, a team can prove what process was followed for each and every

change. This tends to be stronger than taking someone’s word that documented

manual processes are always followed.

• Change management processes can be more lightweight. People who might

otherwise need to discuss and inspect each change can build their requirements

into the automated tooling and tests. They can periodically review the pipeline

implementation and logs, and make improvements as needed. Their time and

attention goes to the process and tooling, rather than inspecting each change one

by one.

Benefits of a Change Management Pipeline | 225

Guidelines for Designing Pipelines

There are a few guiding principles for designing an effective change management

pipeline.

Ensure Consistency Across Stages

Environments, tooling, and processes should be consistent in the essential ways

across stages.

For instance, server operating system versions and configuration should be the same

across environments. This is easily done by using server templates and rolling

changes to them out across environments using the pipeline.

Whenever there is a failure applying a change to a downstream system, especially

production, consider whether upstream systems can be changed to more accurately

emulate the conditions that led to the failure. Always be looking for opportunities to

catch errors earlier in the pipeline.

Consistent environments does not mean identical environments

One objection to making testing environments consistent with production is the

expense. In organizations with hundreds or thousands of servers, or very expensive

hardware, it’s not practical to duplicate this in each stage of the pipeline, or even in

any stage of the pipeline.

However, the point isn’t to have the same number or even size of servers in every

environment. Here are some guidelines:

• Make sure that the essential characteristics are the same. The OS and version

should always be the same. If the production environment uses a more expensive

OS variant (“enterprise” editions, for example), then you either need to bite the

bullet and use this in at least one earlier environment, or else make it a priority to

ensure you can use on an OS that your organization can afford to use across the

board.

• Replicate enough of the production characteristics so that potential issues will be

caught. You don’t need to run 50 servers in a load balancing pool for a test envi‐

ronment. But you should at least make sure you are running two servers behind a

similar load balancer, and exercise it enough to uncover potential problems with

state management.

• At least one environment at the early stage should replicate the complexities of

production. But it isn’t necessary that every single environment does. For exam‐

ple, the automated deployment test environment described earlier in the simple

pipeline may have a load balanced pool of servers and deploy applications on to

226 | Chapter 12: Change Management Pipelines for Infrastructure

separate servers as they are in production. But even later stages like QA and UAT

may be able to run all of the applications on a single server. This needs to be

carefully considered to ensure you’re exposing all of the potential risks due to the

production environment’s architecture.

When It’s Too Expensive to Replicate in Test

Often, the reason that it’s difficult to replicate essential production

characteristics is because it involves expensive equipment. If your

organization is struggling to justify buying additional devices just

for testing, it’s important to take a hard look at its priorities. Hav‐

ing an important system that can’t be properly tested outside of

production is unwise. Either spend the money needed for a respon‐

sible change management process, or else find solutions that the

organization can afford.

Get Immediate Feedback for Every Change

Make sure the pipeline runs quickly so that you get immediate feedback on each

change as it is committed. The pipeline should be the easiest way to get a quick fix

through to production. If people feel the need to bypass the pipeline to make a

change, it’s a sign that the pipeline needs to be improved.

The pipeline should run immediately after any change is committed to its input

materials. This means multiple changes will be continuously running through the

pipeline as different team members make different changes.

If the pipeline takes too long for this to be practical, teams may be tempted to run the

pipeline, or parts of it, on a periodic schedule (i.e., hourly, nightly, etc.). Rather than

doing this, invest the effort to improve the pipeline until it’s possible for the pipeline

to run continuously. This is essential to ensuring fast and continuous feedback on

changes.4

Run Automated Stages Before Manual Stages

Once you have automation that can apply changes to systems in an unattended way,

it becomes cheaper and faster to run a set of automated tests against it than to have

skilled humans spend time testing it. So it makes sense to run all of your automated

tests first, before handing the system over to the humans.

4 Reducing the running time of the pipeline may require changing the architecture of the system. See “Pipe‐

lines, Architecture, and Teams: Conway’s Law” on page 245 later in this chapter.

Guidelines for Designing Pipelines | 227

Running all of the automated test stages first makes sure that the basic problems have

already been found. When a change has been handed over to humans to test, they can

focus their energies on the trickier problems, without getting tripped up by trivial

errors.

Get Production-Like Sooner Rather Than Later

With traditional release processes, software is only tested in the most production-like

environment until just before the release is applied to production. “Preproduction”

or “staging” is the final check before going live. But errors or problems found at the

last minute are the most painful to fix. Fortunately, an automated change manage‐

ment pipeline can turn this around.

An ideal pipeline automatically applies each and every change to the most accurate

test environment as it is committed. Testing at this point ensures that the change has

been proven to be technically production ready before it is handed over to humans to

decide if it’s human-ready.

Doing this may seem counterintuitive. Leaving the comprehensive testing for the last

stage makes sense when doing so is an expensive, time-consuming manual process.

But when deploying changes is effortless, then comprehensively testing every change

as soon as it’s made aligns with the other pipeline design principles, such as running

automated stages before making humans spend time testing a change, and giving

immediate and full feedback on each change as it’s made.

DevOops

I learned the value of managing infrastructure changes using a pipeline the hard way.

I was helping a development team to automate the infrastructure they used for testing

and hosting a public-facing, web-based application.

The team had a sophisticated CD pipeline that automatically deployed their applica‐

tion to one stage at a time, only deploying to the next stage when the previous stage

passed. However, the Chef cookbooks we used to configure the servers were directly

applied to all of our servers at once, across all of the testing environments.

We had decided to have Chef manage the /etc/hosts files on the servers, so it could

automatically add and update hostname mappings, instead of running a private DNS

server.

You can probably see where this is going.

I made a tweak to the cookbook that built the /etc/hosts file and pushed it to our Chef

server. Unfortunately, it had a simple error that made the file completely invalid.

Once my broken cookbook was applied to our servers, none of the servers were

unable to resolve the hostname of the Chef server itself. I fixed my mistake and

228 | Chapter 12: Change Management Pipelines for Infrastructure

pushed a new version of the cookbook to the Chef server, but none of the servers

could get the updated cookbook.

Work ground to a halt for the development team, because all of their test environ‐

ments were broken. Fortunately, we were not yet live, so there was no customer

impact. But I had to endure the glares of my teammates while I logged into each and

every server, one by one, to resolve the issue.5

My colleague Chris Bird described this as “DevOops”; the ability to automatically

configure many machines at once gives us the ability to automatically break many

machines at once.

Ever since this misadventure, I’ve made sure to have changes to my automated con‐

figuration automatically applied to a test environment before they’re applied to any

environment that other people rely on for something important.

Basic Pipeline Designs

Figure 12-1 shows the shape of a simple change management pipeline. Each change is

progressively tested in automated stages and then made available for manual testing

and signoff.

Figure 12-1. Basic change management pipeline

The following sections drill into what typically happens in different types of pipeline

stages.

The Local Development Stage

Infrastructure developers check out the latest version of the definitions and other files

locally, makes changes, and runs tests. They might run tests using local virtualization,

5 Actually, I was able to use Chef’s knife tool to make the fix across our servers fairly quickly. But I was con‐

scious of how easily this, too, could backfire.

Basic Pipeline Designs | 229

or a cloud-based sandbox. 6 When they are satisfied with the change, they commit it

to the VCS.

The Build Stage

The build stage (sometimes called the CI stage)7 is the first stage triggered after a

change is committed to the VCS. It runs on a build agent, which is a server instance

managed by the CI or CD system. This agent will first check out the relevant file set

from the VCS onto the local filesystem. It then carries out validation on that code,

prepares it for use, and finally makes it available to be applied to other environments.

Actions that can happen in the build stage may include some of the following:

• Syntax checking and static analysis (see “Low-Level Testing” on page 204 in

Chapter 11 for details on these activities).

• Compiling code, where relevant.

• Unit tests.

• Local execution tests. For software components and services, it may be appropri‐

ate to run and test it, even though it’s not currently in a full deployment environ‐

ment. This will normally use test doubles (as described in “Test Doubles” on

page 214) rather than integrating with other systems or infrastructure elements,

to keep this stage self-contained. In some cases, containerization (such as

Docker) may help with this.

• Generating and publishing reports, such as code change reports, test results, gen‐

erated documentation, and code coverage reports.

• Packaging code into a distributable and deployable format.

As with any stage of the pipeline, if one of these activities fails, then the stage should

go red and refuse to progress the changes downstream. The results, such as test

reports, should be made easily available either way, so they can be used to diagnose

issues.

6 See Chapter 13 (“Using a Local Sandbox” on page 262) for more on how developers can work on infrastructure

changes before committing.

7 The reason the build stage is called the CI stage is that it encapsulates the early approaches to continuous

integration. These tended to be focused on compiling software code and creating a build artifact. Continuous

delivery expanded the CI concept to deploying and testing software all the way through to production. This

meant adding additional stages and linking them together in a pipeline. Many of the tools used to implement

CD pipelines were originally designed for the single stage use case for CI.

230 | Chapter 12: Change Management Pipelines for Infrastructure

The output of this stage is that whatever is being tested (e.g., a script, library, applica‐

tion, configuration definition, or configuration file) is now in the format that will be

needed to apply it to production.

Publishing a Configuration Artifact

At the end of a successful build stage run, the configuration artifact is packaged and

published. This means preparing the materials and making them available for use in

later stages of the pipeline. What this involves depends on the nature of the infra‐

structure element. Examples include:

• Building a system or language installation package file (an RPM, .deb, .gem, etc.)

and uploading it to a repository

• Uploading a set of definition files (Puppet module, Ansible playbook, Chef cook‐

book, etc.) to a configuration repository

• Creating a template server image (VM template, AMI, etc.) in an infrastructure

platform

The classic application artifact bundles everything into a single file, but this isn’t nec‐

essarily the case for infrastructure artifacts. Most server configuration tools use a set

of files that are grouped and versioned as a unit, such as a Chef cookbook, but they

tend not to be packed into a single distributable file. They may be uploaded to a con‐

figuration repository that understands their format and versioning. Some teams

eschew this functionality and do package the files, either into a system package or

general-purpose archive format, particularly when using a masterless configuration

management model.

The important thing is how the artifact is treated, conceptually. A configuration arti‐

fact is an atomic, versioned collection of materials that provision and/or configure a

system component. An artifact is:

Atomic

A given set of materials is assembled, tested, and applied together as a unit.

Portable

It can be progressed through the pipeline, and different versions can be applied

to different environments or instances.

Versioned

It can be reliably and repeatably applied to any environment, and so any given

environment has an unambiguous version of the component.

Basic Pipeline Designs | 231

Complete

A given artifact should have everything needed to provision or configure the rel‐

evant component. It should not assume that previous versions of the component

artifacts have been applied before.

Consistent

Applying the artifact to any two component instances should have the same

results.

Artifacts with a configuration master

When using a configuration master server (e.g., Chef Server, Puppet Master, or Ansi‐

ble Tower) the artifacts are definition files (e.g., cookbooks, modules, or playbooks).

The build stage will finish by publishing these to the master so they can be applied to

servers by the server configuration tool or agent.

The master should be able to tag the definitions with a version number. It may also

have a feature, such as Chef’s “Environments,” which can be used to assign a specific

version of definition files to an environment. This feature can be used to manage the

progression of the definitions through the stages of the pipeline. As each given ver‐

sion of the definitions passes through a pipeline stage, they can be promoted to the

next stage by assigning them to the next environment in the master.

An alternative to this arrangement is to use multiple master instances. Each stage of

the pipeline, or group of stages, may have its own master. Definitions are uploaded to

the relevant master as they progress through the pipeline.

Artifacts with masterless configuration management

With masterless configuration management (described in “Pattern: Masterless Con‐

figuration Management” on page 139), configuration definitions are stored in a

general-purpose file management system, rather than a special configuration server.

This might be a file server, static web server, object store (such as AWS S3), system

package repository (e.g., APT or YUM) or even a VCS.

Teams that adopt this model often package the definitions in a versioned archive

(e.g., a .tgz, .rpm, or .deb file). The build stage of the pipeline finishes by building this

package and uploading it to the central file store. In later stages, this file is downloa‐

ded to the servers being configured so they can be applied. Versioning might be

inherent in the file storage (e.g., RPM files in a YUM repository), or else might simply

be indicated by the filename (e.g., appserver-config-1.3.21.tgz).

Artifacts with an immutable server model

With immutable servers (explained in “Patterns and Practices for Immutable Servers”

on page 143), the artifact is the server template image. The build stage checks a server

232 | Chapter 12: Change Management Pipelines for Infrastructure

template definition file, such as a Packer template, or script out from VCS, builds the

server template image, and publishes it by making it available in the infrastructure

platform. With AWS, for example, this results in an AMI image.

Generally, the infrastructure platform acts as the repository for the artifact. In some

cases, the template might be packaged in a file format, such as an OVF file or

Vagrant .box file, and then uploaded to a file repository of some type. This is particu‐

larly useful to make a single server template available on multiple infrastructure plat‐

forms or instances.

Automated Testing Stages

Once the build stage has passed and the definitions have been published, they can be

applied and tested in more realistic environments. The specifics will depend on what

is being tested.

Automated testing may take place across multiple pipeline stages. This can be useful

when different types of setup is needed for different test cases. For example, one stage

might test an application server role on its own. Tests would not use a database (the

database could be stubbed or mocked, as per “Test Doubles” on page 214) or any‐

thing else outside of the application server itself. A following test stage could then test

the application server integrated with other infrastructure elements, including the

database server.

Multiple stages should involve progressively widening scope of the infrastructure and

systems being tested. This follows the test pyramid, as illustrated by Figure 12-2.

Figure 12-2. The relationship between the test pyramid and a pipeline

Progressing the testing scope this way has a few benefits. First, the wider scoped tests

normally take longer to run, because there are more things to set up, and the tests

tend to take longer to run. So if the earlier, faster-running tests fail, the pipeline stops

Basic Pipeline Designs | 233

and gives feedback about the error more quickly, rather than waiting for the longer

tests to run first.

Second, it’s easier to find the cause of a failure in the narrower-scoped tests. If a test

fails in the broader test suite, there are more elements that may have contributed to

the failure. If the stage that tests the application server on its own passes, you have

confidence that it is being built correctly. If tests fail at the next stage, when the appli‐

cation server is integrated with the database and other elements, then you can guess

that the problem is caused by the integration of the components, rather than the

components themselves. 8

Manual Validation Stages

Once the automated testing stages have all been run, the definitions can be made

available for manual testing stages. These stages are triggered manually, typically

through the UI of the CD or CI tool. But the provisioning and configuration that it

triggers is executed by the same automated tooling and definitions that were used in

the previous stages.

Unlike the automated testing stages, the sequence of manual stages will tend to be

based on organizational process. Typically, testing for quality assurance happens in

the earliest manual stages. Activities for demonstration, UAT, approvals, and the like

take place in later stages. There may also be stages to deploy to externally visible envi‐

ronments—for example, beta testing or closed previews.

Keeping the Pipeline Moving

Don’t allow work to become bottlenecked by sharing environments or stages. Often

teams will try to use a single-test environment for both QA and demonstrations to

stakeholders. This usually leads to QA work having to stop while the environment is

carefully prepared and then frozen in the leadup to a demonstration. New changes

can’t be deployed for testing, possibly for days at a time, for fear that something will

break the system shortly before the demo.

In these cases, it’s far better to split the environments. QA work should have at least

one environment, depending on how many testers are working simultaneously. Dem‐

onstrations should have their own environments. This is a huge benefit of the ability

to dynamically provision consistent environments using infrastructure as code. In

many cases, environments can be provisioned on demand for a demo or testing exer‐

cise and then destroyed afterward.

8 Of course, this assumes that all of the other components have themselves been tested, as described in the

“Pattern: Fan-In Pipelines” on page 239).

234 | Chapter 12: Change Management Pipelines for Infrastructure

Apply to Live

The final stages in a pipeline is normally the production deployment stage. This

should be a trivial task, because it carries out exactly the same activities, using exactly

the same tools and processes, as have been applied many times in upstream stages.

Any significant risk or uncertainty at this stage should be modeled and addressed in

upstream stages.

The pipeline stage to release to production may involve governance controls. For

example, in some situations, legal or compliance rules require specific individuals, or

multiple individuals, to authorize changes to production systems. The production

stage can use authentication and authorization controls to enforce these require‐

ments.

The capability to apply changes and deploy systems with zero downtime is essential

for ensuring that changes can be made and rolled out quickly and routinely. Disrup‐

tive change processes encourage batching and infrequent releases. This in turn

increases the size, complexity, and risk of releases.

It’s useful to ensure that zero-downtime change processes, 9 such as blue-green

deployment, phoenix deployment, and canary releases, are used and tested in at least

one upstream pipeline stage, preferably an automated test stage.

Continuously Improve the Pipeline

Every problem discovered in manual testing—and in production—

may be an opportunity to ask whether an automated test would

catch a similar error earlier.

The Rhythm of the Pipeline

A commit will run through all of the automated stages of a pipeline, assuming it

doesn’t fail any of the stages. The manual stages tend to be run less often. Figure 12-3

shows a typical series of commits to a component managed by a pipeline.

9 Zero-downtime change processes are described in Chapter 14 (“Zero-Downtime Changes” on page 282).

Basic Pipeline Designs | 235

Figure 12-3. Commits reach later stages of the pipeline less often

Several commits (1, 2, and 3) run through the automated stages without being man‐

ually tested. When the tester is ready, she triggers the QA stage to apply the latest

change (commit 4) to the QA environment. This version includes all of the changes

from commits 1–4, so she can test everything up to this point.

In the meantime, the team commits a few more changes (5 and 6). The tester may

report an issue, after which a fix is committed (7). This fix moves through the pipe‐

line, and the tester deploys it to the QA environment. After this is tested, one more

change is committed (8), tested by the tester, and then deployed to the demo envi‐

ronment. Again, this includes all of the previous changes.

The cycle is repeated a few more times, with commits 9 through 12 all running

through the automated stages. Changes 10 and 12 are tested in the QA stage, with

change 12 making it through to the demo stage, and finally to production.

This example shows that the earlier stages of the pipeline will run more often than

the later stages. It also shows that not every change, even ones that pass testing and

demo, are necessarily deployed immediately to production.

Practices for Using a Pipeline

The previous section describes a basic pipeline. The next section will expand this into

more complex situations. However, before doing this, it’s useful to consider some key

practices for teams working with pipelines.

236 | Chapter 12: Change Management Pipelines for Infrastructure

Practice: Prove Production Readiness for Every Change

Every time you commit to VCS, assume the change could be put through to produc‐

tion if it passes the automated checks. Don’t assume you will be able to finish it off,

clean it up, or make any additional edits. So don’t make a change that you would be

alarmed to find in production.

This can be an issue because multiple people may be making changes to the same

component in the VCS during the same period. One person may commit a change

that they know will need some more work before it should go to production. In the

meantime, someone else may make a change that they send straight through to pro‐

duction, taking the first person’s unfinished work with it.

The classic technique for managing this situation is to have people work on different

branches, and merge each one to trunk as it’s ready. However, this does not meet the

criteria of keeping the codebase production ready at all times: it stores up merging

and testing work to be done at some later point.

Alternative techniques for managing concurrent workstreams in a single codebase

include feature hiding, feature toggles, and branch by abstraction.10 People can use

these to commit their changes to the codebase, knowing they will not be active even if

they do get physically deployed to production.

Practice: Start Every Change from the Beginning of the Pipeline

Occasionally, when a change fails in a downstream stage, it’s tempting to make a fix

directly there, maybe even editing the files in the artifact repository. However, this is

a dangerous practice, as the new edit won’t have been tested in the upstream stages so

may have problems that won’t be caught until too late. Also, manual fixes in later

environments have a habit of either becoming forgotten, or being added to a checklist

of manual steps that erode the effectiveness of the automation.

Instead, the fix should be made in the source and committed to the VCS. A new run

of the pipeline should start, from the beginning, to fully test the fix. The same rule

applies when something breaks because of the tooling or the process that applies the

change. Fix the tool or process, commit the necessary changes, and run the pipeline

through from the start. If your pipeline is fast enough, this should not be painful.

10 These techniques are explained in Chapter 10 (“Continuous Integration (CI)” on page 183), along with the

case for preferring continuous integration to feature branching.

Practices for Using a Pipeline | 237

Practice: Stop the Line on Any Failure

If a stage fails, everyone committing changes to components upstream from that

stage should stop committing. Otherwise, new changes are piled onto the broken

environment, making it difficult to untangle what went wrong.

So stop the line whenever there is a failure. Make sure you know who is working to

fix it, and support them if they need it. If you can’t come up with a fix right away,

then roll back the change to get the pipeline green again.

Emergency Fixes

Emergency fixes should always be made using the pipeline. If the pipeline isn’t fast or

reliable enough, then improve it until it is.

In a critical outage, it might be necessary to figure out what the fix is by working

directly on a production system. But once the fix is identified, it should be made in

the VCS and immediately rolled out through the pipeline. If you neglect to push the

fix through properly, your fix will most likely be reverted when a future change is

pushed through the pipeline based on the original, unfixed source.

Scaling Pipelines to More Complex Systems

The pipeline designs described so far in this chapter have been relevant for a single

component. In practice, most systems involve multiple components that may be

committed and built separately, and then deployed and integrated together.

Quite often, a component, such as a service, is composed of several smaller, sepa‐

rately built components. For example, an application server may use an AMI server

template built with Packer, Puppet manifests, a Dropwizard application, and may use

networking configuration specified in a CloudFormation template. Each of these

might have its own VCS repository project and trigger its own build stage to test and

publish it individually.

In some cases, elements may even be deployed and managed independently, but have

runtime dependencies that may be useful to test ahead of releases to production. For

example, the application may integrate with other application services managed and

deployed by different teams, perhaps using services such as a message bus to commu‐

nicate.

There are a number of design patterns that can be used to build pipelines for these

more complex scenarios. The appropriate pattern depends on the systems and com‐

ponents that the pipeline manages.

238 | Chapter 12: Change Management Pipelines for Infrastructure

Pattern: Fan-In Pipelines

The fan-in pattern is a common one, useful for building a system that is composed of

multiple components. Each component starts out with its own pipeline to build and

test it in isolation. Then the component pipelines are joined so that the components

are tested together. A system with multiple layers of components may have multiple

joins.

As an example, let’s consider the kinds of environments described in Chapter 9, such

as Figure 9-3, reproduced and simplified here in Figure 12-4.

Figure 12-4. An example environment with its components

This environment is composed of several components. These include three infra‐

structure stacks, each defined in a Terraform definition file: one for the global infra‐

structure, and one each for web server and application server infrastructure.11 There

are also two different server templates, one for web servers, and one for application

servers, each defined in a Packer template.

The full pipeline for the service stack is shown in Figure 12-5. It has five input mate‐

rials, each in its own VCS repository:

• Packer template and scripts for the web server template

• Terraform definition for the web server infrastructure stack

11 The ideas behind this design are laid out in “Organizing Infrastructure” on page 158 in Chapter 9.

Scaling Pipelines to More Complex Systems | 239

• Packer template and scripts for the application server template

• Terraform definition for the application server infrastructure stack

• Terraform definition for the global infrastructure stack

Each of these materials may start its own feeder branch.

Figure 12-5. Fan-in pipeline for the full service stack

Feeder branches

A feeder branch is a pipeline section that runs some number of stages, and then joins

together with other feeder branches. Figure 12-6 shows the feeder branch for the web

server stack. This feeder branch itself joins two smaller feeder branches, one for the

web server template, the other for the web server infrastructure.

Figure 12-6. Feeder branch for the web server infrastructure component

The first branch builds the web server template from a Packer definition file, and the

second validates the web server infrastructure stack using a Terraform definition file.

Committing a change to either input component in VCS—the Packer definition file

or the Terraform definition file—triggers the branch for that component.

240 | Chapter 12: Change Management Pipelines for Infrastructure

A change to the Packer definition file kicks off the “Validate Packer definition file”

stage. This checks out the Packer template from VCS and runs static analysis checks.

If these pass, the “Build and test AMI” stage is triggered. This runs Packer on the def‐

inition file, building an AMI image.

Join stages

A join stage brings the outputs of two or more feeder branches together. When one of

the feeder branches runs successfully, it triggers the join stage, which uses the new

artifact from the feeder that triggered it. The join stage uses the artifact from the last

successful run of each of the other branches. This means that the only one new arti‐

fact is being used and tested. If the tests in the join stage fail, it is immediately clear

which input caused the failure, because only one has changed since the last time it

ran.

The join stage labeled “Build and test web server infrastructure” in Figure 12-6 has

two feeder branches that can trigger it. It runs the Terraform tool, using the Terra‐

form definition from the “Validate Terraform definition file” stage to build an infra‐

structure stack, and using the AMI built by the “Build and test AMI” stage to create a

pool of servers.

The join stage then runs automated tests to make sure that the web server stack

builds and works correctly. It might use Serverspec to validate that the web server is

configured correctly, and an HTTP-client testing tool to check that the web server is

running and correctly serving test content.

Fan-in and the test pyramid

Figure 12-7 illustrates that a change management pipeline with fan-in pattern imple‐

ments the test pyramid model.

Figure 12-7. A fan-in pipeline is the implementation of a test pyramid

Scaling Pipelines to More Complex Systems | 241

The limits of fan-in pipelines

As the size of a system grows, and as the number of people working on it grows, fan-

in pipelines create challenges. Join stages become bottlenecks as the number of inputs

grows, with changes from feeder pipelines queuing up waiting to run. More coordi‐

nation may be needed to avoid conflicts between changes to different components,

which creates the need to add processes, meetings, and team roles to manage sched‐

ules and communications.

Teams should take the pressure to create manual processes and ceremonies for man‐

aging changes as a signal that the design of their system, pipeline, and/or organiza‐

tion is not coping with growth. Adding manual process to work around these

limitations avoids addressing the real problems, and adds unnecessary overhead.

In some cases, teams can improve their designs and implementations within the fan-

in model, to allow it to handle growth without limiting throughput. 12 In other cases,

however, moving away from the fan-in model helps. These alternatives are, arguably,

similar to the decision of whether to scale a server up by adding more hardware and

optimizing the software it runs, or scale out, by distributing the system across multi‐

ple servers.

Measuring Pipeline Effectiveness: Cycle Time

As with any effort to improve a system’s performance, the starting point is to measure

the existing level of performance. The most effective measurement of a change man‐

agement pipeline is the cycle time. Cycle time is the time between deciding on the

need for a change to seeing that change in production use.

It’s important that the starting point for the cycle time is early enough to reflect the

full impact of the change management process. The cycle time does not start when a

change is committed to trigger the pipeline. The pipeline is only one part of the

change management process, and measuring it on its own is likely to suboptimize.13

For example, if changes often fail in the pipeline because of conflicts with changes to

other components, you could enforce a policy that only one change can be committed

and run through the pipeline at a time. This would allow you to tune the pipeline

implementation so that it runs very quickly. But it would also create a huge backlog

of changes waiting to be committed into the pipeline. From the perspective of a user

needing a change, the fact that the pipeline completes within 5 minutes 99% of the

12 One optimization might be to allow multiple instances of a join stage to run concurrently, with different com‐

binations of its input artifacts. I’m not aware of any CI or CD tools that naturally support this. But it sounds

cool.

13 See “Track and Improve Cycle Time” on page 313 in Chapter 15 for more on cycle time.

242 | Chapter 12: Change Management Pipelines for Infrastructure

time doesn’t help if it takes over a week to get a change into the pipeline to begin

with.

This isn’t to say that measuring the end-to-end run time of the pipeline itself isn’t

important. However, make sure that improving the full, end-to-end cycle time of a

change is the paramount goal.

Practice: Keep Pipelines Short

The longer the pipeline is, the longer it will take changes to run through. Keeping

pipelines as short as possible helps to keep changes running through quickly and

smoothly.

It’s best to start with the most minimal pipeline, rather than starting with the more

complex design that you think you might need later. Only add stages and branches to

the pipeline as you discover real issues that need to be addressed. Always keep an eye

out for opportunities to remove things that are no longer relevant.

Practice: Decouple Pipelines

When separate teams build different components of a system, such as microservices,

joining pipeline branches for these components together with the fan-in pattern can

create a bottleneck. The teams need to spend more effort on coordinating the way

they handle releases, testing, and fixing. This may be fine for a small number of teams

who work closely together, but the overhead grows exponentially as the number of

teams grows.

Decoupling pipelines involves structuring the pipelines so that a change to each com‐

ponent can be released independently. The components may still have dependencies

between each other, so they may need integration testing. But rather than requiring

all of the components to be released to production together in a “big bang” deploy‐

ment, a change to one component could go ahead to production before changes to

the second component are released.

Decoupling the release of integrated components is easier said than done. Clearly,

simply pushing changes through to production risks breaking things in production.

There are a number of techniques and patterns for testing, releasing, and pipeline

designs to help. These are discussed in following sections.

Integration Models

The design and implementation of pipelines for testing how systems and infrastruc‐

ture elements integrate depends on the relationships between them, and the relation‐

ships between the teams responsible for them. There are several typical situations:

Scaling Pipelines to More Complex Systems | 243

Single team

One team owns all of the elements of the system and is fully responsible for man‐

aging changes to them. In this case, a single pipeline, with fan-in as needed, is

often sufficient.

Group of teams

A group of teams works together on a single system with multiple services and/or

infrastructure elements. Different teams own different parts of the system, which

all integrate together. In this case, a single fan-in pipeline may work up to a

point, but as the size of the group and its system grows, decoupling may become

necessary.

Separate teams with high coordination

Each team (which may itself be a group of teams) owns a system, which integra‐

tes with systems owned by other teams. A given system may integrate with multi‐

ple systems. Each team will have its own pipeline and manage its releases

independently. But they may have a close enough relationship that one team is

willing to customize its systems and releases to support another team’s require‐

ments. This is often seen with different groups within a large company and with

close vendor relationships.

Separate teams with low coordination

As with the previous situation, except one of the teams is a vendor with many

other customers. Their release process is designed to meet the requirements of

many teams, with little or no customizations to the requirements of individual

customer teams. “X as a Service” vendors, providing logging, infrastructure, web

analytics, and so on, tend to use this model.

As with any model, this is a rough approximation. Most teams will have a variety of

integration models, as seen in Figure 12-8.

Clearly, different approaches are needed to test and release changes across integrated

components, depending on how closely the teams coordinate. As integration testing

becomes a bottleneck to the cycle time for changes, it’s worth considering moving

toward a different model. The way to decouple components is to decouple teams.

Giving individual teams more autonomy over how they build, test, and release their

components empowers them to become more efficient.

244 | Chapter 12: Change Management Pipelines for Infrastructure

Figure 12-8. Integrating multiple systems

Pipelines, Architecture, and Teams: Conway’s Law

The design of your change management pipelines is a manifestation of your system’s

architecture. Both of these are a manifestation of your team structure. Conway’s law

describes the relationship between the structure of an organization and its systems:

Any organization that designs a system (defined more broadly here than just infor‐

mation systems) will inevitably produce a design whose structure is a copy of the

organization’s communication structure.

Organizations can take advantage of this to shape their teams, systems, and pipeline

to optimize for the outcomes they want. This is sometimes called the Inverse Conway

Maneuver. Ensure that the people needed to deliver a given change through to pro‐

duction are all a part of the same team. This may involve restructuring the team but

may also be done by changing the system’s design. It can often be achieved by chang‐

ing the service model, which is the goal of self-service systems.

A key thing to remember is that designs will always evolve. Designing a new system,

team structure, and pipeline is not a one-off activity. As you put designs into practice,

you will discover new limitations, issues, and opportunities and will need to continu‐

ally revise and adapt to meet them.

Scaling Pipelines to More Complex Systems | 245

Techniques for Handling Dependencies Between

Components

There are a number of techniques to ensure that a component works correctly when

it integrates with another component not managed by the same pipeline. There are

two sides to this problem. Given two integrated components, one provides a service,

and the other consumes it. The provider component needs to test that it is providing

the service correctly for its consumers. And the consumer needs to test that it is con‐

suming the provider service correctly.

For example, one team may manage a monitoring service, which is used by multiple

application teams. The monitoring team is the provider, and the application teams

are the consumers. Other examples of provider teams include:

• A shared infrastructure team, which defines and manages networking constructs

used by multiple teams

• An infrastructure platform team, which provides a virtualization, cloud, or auto‐

mated hardware provisioning toolset with an API used by other teams

• A database service team, which manages an API-driven service used by applica‐

tion teams to provision, configure, and support database instances

Pattern: Library Dependency

One way that one component can provide a capability to another is to work like a

library. The consumer pulls a version of the provider and incorporates it into its own

artifact, usually in the build stage of a pipeline. For example, a team may maintain an

Ansible playbook for installing and configuring the nginx web server. Other teams

consume this, applying the cookbook to their own web server instances.

The important characteristic is that the library component is versioned, and the con‐

sumer can choose which version to use. If a newer version of the library is released,

the consumer may opt to immediately pull it in, and then run tests on it. However, it

has the option to “pin” to an older version of the library.

This gives the consumer team the flexibility to release changes even if they haven’t yet

incorporated new, incompatible changes to their provider library. But it creates the

risk that important changes, such as security patches, aren’t integrated in a timely

way. This is a major source of security vulnerability in IT systems.

For the provider, this pattern gives freedom to release new changes without having to

wait for all consumer teams to update their components. But it can result in having

many different versions of the component in production, which increases the time

246 | Chapter 12: Change Management Pipelines for Infrastructure

and hassle of support. In Figure 12-9, one team provides an Ansible playbook for

installing and configuring the nginx web server. Another team owns an application

microservice and uses the playbook to install nginx on their application server.

Figure 12-9. Decoupled provider and consumer pipelines

This pattern is commonly used to share standard server templates across teams. One

team might create a standard Linux VM template image for the organization. This

would have the standard build of a Linux distribution, with common configuration

and packages for things like shared authentication, network configuration, monitor‐

ing, and security hardening. Other teams can then pull the latest version of this image

to build their servers or perhaps use them as a base to build their own layered tem‐

plate (as in “Pattern: Layered Template” on page 129 in Chapter 7).

Repository as an Artifact

Another way to promote sets of package versions between pipeline stages is on the

repository side, using the “repository as an artifact” pattern.14 A team using this

approach sets up a separate package repository mirror for each environment. The

upstream stage updates packages from public repositories and triggers tests. As each

pipeline stage passes its tests, the packages are copied to the next stage’s repository

mirror. This ensures the consistency of the full set of dependencies.

Repository as an artifact can be implemented with systems like Spacewalk channels,

or more simply with things like reposync or even rsync.

14 I learned about this pattern from my colleague Inny So.

Techniques for Handling Dependencies Between Components | 247

Pattern: Self-Provisioned Service Instance

The library pattern can be adapted for full-blown services. A well-known example of

this is AWS’s Relational Database Service, or RDS, offered by AWS. A team can pro‐

vision complete working database instances for itself, which it can use in a pipeline

for a component that uses a database.

As a provider, Amazon releases new database versions, while still making older ver‐

sions available as “previous generation DB instances”. This has the same effect as the

library pattern, in that the provider can release new versions without waiting for con‐

sumer teams to upgrade their own components.

Being a service rather than a library, the provider is able to transparently release

minor updates to the service. Amazon can apply security patches to its RDS offering,

and new instances created by consumer teams will automatically use the updated ver‐

sion.

The key is for the provider to keep close track of the interface contract, to make sure

the service behaves as expected after updates have been applied. Interface contracts

are discussed in more detail in “Practice: Test the Provider with Contract Tests” on

page 254. An update that changes expected behavior should be offered as a new version

of the service, which can be explicitly selected by consumer teams.

This pattern is often useful for infrastructure and platform services such as monitor‐

ing, databases, and dashboards. Consumer teams can have their pipelines automati‐

cally spin up a service instance to test against, and then tear it down again after the

testing stage is finished.

Providing Pre-Release Library Builds

Teams providing libraries often find it useful to make pre-release builds available for

consumer teams to test against. Betas, snapshots, and early releases give consumers

the opportunity to develop and test the use of upcoming features. This gives the pro‐

vider feedback on their changes, and allows the consumers to be prepare before new

features are released.

Pre-release builds should be generated by a pipeline stage. This could be an inline

stage that produces a pre-release build for every build that passes a certain stage, as in

Figure 12-10. Or it could be a fork, where a person selects and publishes a pre-release

build, as in Figure 12-11.

248 | Chapter 12: Change Management Pipelines for Infrastructure

Figure 12-10. Publishing pre-release builds with an inline stage

In Figure 12-10, every build that reaches the pre-release stage is published. The build

published as a full release at the end of the pipeline will also have been a pre-release

build. On the other hand, the build published as a full release build from the forked

pipeline in Figure 12-11 will not necessarily have been previously selected to publish

as a pre-release build.

Figure 12-11. Publishing pre-release builds with a forked pipeline

Providing Test Instances of a Service to Consumers

The provider of a hosted service needs to provide support for consumers to develop

and test their integration with the service. This is useful to consumers for a number

of purposes:

• To learn how to correctly integrate to the service

• To test that integration still works after changes to the consumer system

• To test that the consumer system still works after changes to the provider

• To test and develop against new provider functionality before it is released

• To reproduce production issues for troubleshooting

• To run demonstrations of the consumer system without affecting production

data

Techniques for Handling Dependencies Between Components | 249

An effective way for a provider to support these is to provide self-provisioned service

instances. If consumers can create and configure instances on-demand, then they can

easily handle their own testing and demonstration needs.

For example, a database service team in a larger organization could make it possible

for other teams to spin up and manage their own instances of the database server.

Consumer teams can use this capability to experiment with new configuration

options, without polluting their production database.

Providers can supplement test instances by making it possible for consumers to pro‐

vision pre-release builds of their service. This is the same idea as a pre-release library,

but offered as a hosted service.

Data and configuration management is a challenge with test instances of a service. It’s

important that consumer teams are able to automatically load appropriate data and

configuration to the service instance. This could be artificially constructed test data,

to enable automated tests. Or it could be a snapshot of production data, useful to

reproduce production issues or demonstrate functionality. Service provider teams

may need to develop APIs, tooling, or other mechanisms to help consumer teams do

this easily.

For services that can’t be self-provisioned, running test instances is more challenging.

Configuration and data in a long-lived test instance can become stale over time and

easily drifts so that it becomes inconsistent with production. This makes testing less

accurate. Multitenancy test systems are even more likely to become messy. Teams in

this situation would do well to move their systems toward single-tenancy and to pro‐

vide self-provisioning capabilities to their consumers.

Using Test Instances of a Service as a Consumer

A team that consumes a service provided by another team can include stages in their

pipeline that deploy and test integration with a test instance of the provider.

For example, if an application team is using monitoring from a central monitoring

service team, they can have a test stage that is monitored by a test instance of the

monitoring server. They can use this to test changes to the monitoring configuration.

They can also have automated monitoring tests, artificially causing failures to their

own application to prove that the correct monitoring alerts fire. This can catch issues

where a change to the application makes existing monitoring checks invalid.

Normally, automated testing against a test instance of a provider will run near the

end of the automated stages of the pipeline, after testing with the provider mocked

out. 15 This is illustrated in Figure 12-12.

15 As described in “Techniques to Isolate Components for Testing” on page 213 in Chapter 11.

250 | Chapter 12: Change Management Pipelines for Infrastructure

Figure 12-12. Automatically testing against provider instances

If the provider also deploys pre-release builds of its service to a test instance, then the

consumer team can use this as well. Having a pipeline stage that integrates with a pre-

release build helps to uncover potential issues with upcoming releases of the pro‐

vider. This works well in conjunction with version tolerance (described later), to

ensure that the consumer component will work easily with either the new or old ver‐

sion of the provider. This frees the consumer team from worrying about the pro‐

vider’s release schedule.

As mentioned earlier, managing data in test instances can be challenging. Long-

running test instances can become polluted with old test data. This complicates auto‐

mated tests and can result in test systems that don’t represent the production

instances very well.

Automated test suites should set up the test data they need when they run. It may be

possible to load snapshots of production data. However, automated tests should not

make assumptions about data that they have not explicitly constructed; otherwise

they can’t be guaranteed to run consistently.

In some cases, it’s possible to run tests against production instances of a third-party

system. This is obviously fine when the consumer doesn’t alter data in the other sys‐

tem. For example, when you have an external service that provides lookups, such as

DNS, there isn’t much call to have a special test server to integrate with.

Testing while integrating with a production system can also work when the data from

the consumer test can be easily segregated. For a monitoring service, for example, the

Techniques for Handling Dependencies Between Components | 251

test instances of the consumer can be tagged as a separate environment, which is con‐

figured as noncritical. This keeps the production system monitoring data clearly seg‐

regated from the test system data.

Practices for Managing Interfaces Between Components

A cornerstone of independently deployable components is loose coupling. Ideally,

changing one part of the system won’t have any impact on other parts of the system.

The way in which one component integrates with another is the interface.

An interface could be a formal API. A server provisioning script may use a monitor‐

ing server’s REST interface to add and remove checks for servers. It could be less for‐

mal, such as the arguments accepted by a command-line tool that is executed in a

Bash script. Or it could be a matter of filesystem locations where a script or tool can

expect to find executables, libraries, or configuration files.

One of the most important jobs of a pipeline is to make sure that when a change is

made to one (or both!) side of these interfaces, everything still works correctly. If the

pipelines are decoupled so that the pieces on each side of the interface are released on

their own, there is a risk that problems with the integration between these interfaces

will only be discovered in production.

Clearly this would be bad. But there are a number of techniques to catch integration

errors with independent pipelines.

Practice: Ensure Backward Compatibility of Interfaces

Providers should work hard to avoid making changes that break existing interfaces.

Once a release is published and in use, new releases should not change the interfaces

used by consumers.

It’s normally easy to add new functionality without breaking interfaces. A command-

line tool can add a new argument without changing the behavior of existing argu‐

ments.

When improvements are made to the way those existing arguments work, the results

should be the same as before. This can be tricky with bug fixes. Ideally, fixing incor‐

rect behavior should only make consumers happy, but often what people build on top

of something buggy may rely on the incorrect behavior. The provider needs to make

a call on this. In some cases, vendors have actually maintained incorrect behavior to

avoid breaking their users’ systems.

If there is a need to make drastic changes to an existing interface, it’s often better to

create a new interface, leaving the old one in place. The old interface can be depre‐

cated, with warnings to users that they should move to using the new version. This

gives consumers time to develop and test their use of the new interface before they

252 | Chapter 12: Change Management Pipelines for Infrastructure

switch, which in turn gives the provider the flexibility to release and iterate on the

new functionality without having to wait for all of their consumers to switch.

For example, a team may install a new version of a library or command-line tool on a

different filesystem path. User might change environment variables or paths in their

scripts in order to use the new version when they’re ready.

Practice: Decouple Deploying from Releasing

Many organizations that operate very large-scale systems find that testing changes in

pre-release environments has low value. The number, complexity, and versions of

components running in production may be large and constantly changing. This

makes it difficult to reproduce production conditions in a meaningful way.

The difficulty is not only cost, but time, effort, and opportunity cost. In order for test‐

ing in a pre-release environment to be even moderately viable for catching issues, the

pace of change needs to be kept slow. Throttling the pace of IT change can be danger‐

ous for a business that relies on it to remain competitive.

So a common technique is to deploy changes into production without necessarily

releasing them to end users. New versions of components are put into the production

environment and integrated with other components in ways that won’t impact nor‐

mal operations. This allows them to be tested in true production conditions, before

the switch is flipped to put them into active use. They can even be put into use in a

drip-feed fashion, measuring their performance and impact before rolling them out

to the full user base.

Techniques for doing this include those used to hide unfinished changes in the code‐

base, such as feature toggles, as well as zero-downtime replacement patterns. 16

Practice: Use Version Tolerance

The flipside of maintaining backward compatibility for providers is for consumers to

ensure version tolerance. A consumer team should ensure that a single build of their

system can easily work with different versions of a provider that they integrate with,

if it’s a likely situation.

It can be nice to handle this version detecting and switching dynamically, detecting

the version and using options and parameters accordingly. A shell script can check to

see which version of an executable is available on the system, and adapt its behavior

accordingly. A provisioning script can change the version of the monitoring server’s

REST API it assumes after querying the API version.

16 See “Zero-Downtime Changes” on page 282 in Chapter 14, as well as “Managing Major Infrastructure Changes”

on page 192 in Chapter 10.

Practices for Managing Interfaces Between Components | 253

But in some cases, it’s useful to control which version of the provider is used. For

example, a consumer team may want to continue using the previous version of an

API in production until the latest version has stabilized.

Some teams will resort to building different versions of their consumer system or

component to integrate with different versions of the provider. But this risks diverg‐

ing the codebase, which degrades the effectiveness of continuous integration.

Another option is to use a feature toggle to explicitly set the version of the upstream

provider interface to use in different environments.

Practice: Provide Test Doubles

Teams responsible for a system that integrates with a service provided by another

team sometimes find that the provider instance causes issues with testing. This is

especially common with test instances, which may be slow, unreliable, or poorly sup‐

ported. This can be frustrating, because it makes it difficult for the team to get feed‐

back on changes to their own system.

Test doubles17 offer a way to work around these situations. Early pipeline stages can

provision a system, integrating with a mock service that emulates the provider ser‐

vice. The mock service is a dummy that allows the consumer system to run and be

tested. These stages validate the consumer system’s own functionality, so test failures

indicate a problem with the team’s own code, not the provider service.

Later stages of the pipeline, such as ones at the end of the automated sequence of

stages, can deploy and integrate with the provider service instance, and run tests that

ensure the integration is correct.

Providers might consider making stubs or other types of doubles for their systems

available for consumers to use in their own testing. Some infrastructure platform API

libraries (e.g., fog.io) include mocks so that developers writing scripts to use an infra‐

structure provider’s API can test their code without provisioning real infrastructure.

Practice: Test the Provider with Contract Tests

Contract tests are automated tests that check whether a provider interface behaves as

consumers expect. This is a much smaller set of tests than full functional tests, purely

focused on the API that the service has committed to provide to its consumers.

By running contract tests in their own pipeline, the provider team will be alerted if

they accidentally make a change that breaks the contract.

17 See “Test Doubles” on page 214 in Chapter 11.

254 | Chapter 12: Change Management Pipelines for Infrastructure

Writing these tests help a provider to think through and clearly define what consum‐

ers can expect from their interface. This is an example of how test-driven develop‐

ment (TDD) helps to improve design. The tests themselves can also become

documentation for consumers to see how to use the system.

Practice: Test with a Reference Consumer

A variation of contract testing is for a provider team to maintain a simple example of

a consumer application. For example, the team that manages the infrastructure plat‐

form could write an example Terraform definition file for an application stack.

Whenever they make a change to the platform, their pipeline uses this definition to

provision an instance of the reference application stack and run some automated

tests to make sure everything still works as expected.

This reference consumer can also be made available to consumer teams as an exam‐

ple. Examples of this kind work best when they are actively used and continuously

tested. This ensures they are kept up to date and relevant to the latest version of the

provider.

Practice: Smoke Test the Provider Interface

In some cases, it may help teams building and running consumer systems to auto‐

matically validate the interfaces of components and systems provided by other teams.

The value of this tends to be higher as the two teams involved are less well connected.

The consumer team can check that new versions of the provider meet their own

assumptions for how they behave.

When the provider is a hosted service, the consumer may not have visibility of when

changes are made to it and so may want to run these tests more frequently. For exam‐

ple, they might do this whenever they deploy a change to their own system. Con‐

sumer teams might even consider running these tests from the monitoring server so

they can receive alerts when the provider changes in a way that will break their own

system.

Practice: Run Consumer-Driven Contract (CDC) Tests

A variation on these previous practices is for a provider to run tests provided by con‐

sumer teams. These tests are written to formalize the expectations the consumer has

for the provider’s interface. The provider runs the tests in a stage of its own pipeline,

and fails any build that fails to pass these tests.

A failure of a CDC test tells the provider they need to investigate the nature of the

failed expectation. In some cases, the provider will realize they have made an error, so

they can correct it. In others, they may see that the consumer’s expectations are

incorrect, so they can let them know to change their own code.

Practices for Managing Interfaces Between Components | 255

Or the issue may not be as straightforward, in which case the failed test drives the

provider to have a conversation with the consumer team to work out the best solu‐

tion.

Conclusion

Implementing change management pipelines for infrastructure transforms the way

IT systems are managed. When done well, people spend less time and energy on indi‐

vidual changes—planning, designing, scheduling, implementing, testing, validating,

and fixing them. Instead, the focus shifts to the processes and tooling that make and

test changes.

This transformation helps the team to focus on improving their workflow. Their goal

becomes being able to quickly and reliably make changes to adapt services to the

needs and opportunities of the organization. But it’s also a major change in the way

that people work on their infrastructure. The next chapter takes a look at team work‐

flow with infrastructure as code.

256 | Chapter 12: Change Management Pipelines for Infrastructure

CHAPTER 13

Workflow for the Infrastructure Team

Managing infrastructure as code is a radically different way of working for most IT

operations people. This chapter aims to explain how an IT operations team gets their

work done in this kind of environment, with some guidance for how to make it work

well.

The big shift is away from working directly on servers and infrastructures, to working

on them indirectly. An infrastructure engineer can no longer just log onto a server to

make a change. Instead, they make changes to the tools and definitions, and then

allow the change management pipeline to roll the changes out to the server.

This can be frustrating at first. It feels like a slower, more complicated way to do

something simple. But putting the right tooling and workflows into place means that

people spend less time on routine, repetitive tasks. Instead, they focus their energies

on handling exceptions and problems, and on making improvements and changes

that will make exceptions and problems less common.

A good infrastructure-as-code workflow makes it easy to work indirectly on servers

this way. But it can be challenging to get the workflow right and keep it that way. If

the tooling and processes aren’t easy, then team members will often find they need to

jump onto a server or configuration UI and make a quick change outside the automa‐

tion tools. It might be necessary to do this in the early days of moving to infrastruc‐

ture as code, but it should be a priority to address whatever shortcomings make this

necessary.

The main characteristics of a good automation workflow are speed and reliability. It

must be possible to get a change through to systems fast enough that it’s a valid way

to handle emergencies. The person making a change must be confident that it will

work as expected and know whether it will create any new problems.

257

Automate Anything That Moves

The most important habit of an effective infrastructure coder is automating tasks

whenever possible. You might carry out a task by hand the first time, in order to

understand how it works. But doing the same task multiple times is boring.

The Virtue of Laziness

Larry Wall describes laziness as the first of the three great virtues of

a programmer. He defines it as “The quality that makes you go to

great effort to reduce overall energy expenditure. It makes you

write labor-saving programs that other people will find useful, and

document what you wrote so you don’t have to answer so many

questions about it.”1

Be on the lookout for user requests, issues, or tasks that crop up again and again, and

find ways to avoid needing to do them. There is a hierarchy of techniques, starting

with the most preferred:

1. Redesign or reconfigure things so the task isn’t necessary at all.

2. Implement automation that handles the task transparently, without anyone

needing to pay attention.

3. Implement a self-service tool so that the task can be done quickly, by someone

who doesn’t need to know the details, preferably the user or person who needs it

done.

4. Write documentation so that users can easily carry out the task on their own.

Obviously, documentation or a self-service tool needs to be appropriate for the user.

Very few marketing managers want to log into a Linux server to run a shell script to

run a report, but most would be be OK with a browser-based dashboard.

The essential goal is to remove the system administrator from the flow for getting a

task done. The role of the system administrator is to build the automation, prevent

and handle problems, and make improvements. Using the assembly line example,

you don’t want workers to be handling each part as it passes through the line; instead,

you want them working on the robotic machinery that handles the parts. The assem‐

bly line should keep running even when you turn your attention to some other task.

Let’s consider different ways that a system administrator in an IT operations team

might make a configuration change on their web servers. Imagine that the sysadmin

1 Read about the three virtues on the c2 wiki, or in the book Programming Perl by Larry Wall, Tom Christian-sen, and Randal Schwarz (O’Reilly).

258 | Chapter 13: Workflow for the Infrastructure Team

discovers a web server configuration setting that will make the servers more secure,

and decides to apply it.

Make the Change Manually

The fastest and simplest way to make the configuration change would be to log onto

the web servers and edit the configuration file.2 This will be tedious if the team has

very many web servers. Worse, the change won’t be visible to other people on the

team. Someone might even notice the change, assume it was a mistake, and undo it.

Or another person might set up a new web server without using the improved config‐

uration, leading to inconsistently configured servers.

Even if the other team members do know about the change, they may not know how

to implement it when they set up a new server. For example, they may not realize that

the change needs a new web server module to be installed. They will realize their mis‐

take when the web server fails to start, but it wastes their time. They might then

resolve the issue in a different way than the first person did, which again leads to

inconsistency.

Ad Hoc Automation

If the team has very many web servers, the sysadmin will probably write a script to

make the change, to avoid the tedium of making the same change manually on one

server at a time.

So the sysadmin writes a script that runs across all of the web servers and makes the

change to the configuration file on each one. The script could simply copy a new web

server configuration file into place. Or if the configuration files vary between servers,

the script might instead do a search and replace. This would only change the relevant

lines of the file, or maybe just append new lines to the file. The script can also install

the module and reload the server process, maybe even running a simple smoke test to

let the sysadmin know if it fails for some reason.

Teams often adopt remote command execution tools3 to make it easier to write and

run scripts across many servers.

This is an improvement over making changes manually. Other members of the team

can see how the change was applied, and might be able to use the script again on

other web servers.

2 Using vi, obviously.

3 See “Tools for Running Commands on Servers” on page 66 in Chapter 4

Automate Anything That Moves | 259

But there are a few problems with this approach. One is that there is no assurance

that the configuration change will be applied to new web servers. Other team mem‐

bers might remember to run it, or they might copy the configuration from an existing

server, but there’s no guarantee.

And there’s a high likelihood that other changes could be made to the web server

configuration that break the way the script works. Nobody is likely to go back and fix

the script until they try to run it later on and find it’s broken. The temptation will be

not to bother trying to fix and reuse the script, but probably to write a new one.

Running a variety of scripts on an ad hoc basis yields unpredictable results and

inconsistent infrastructure, as shown in Figure 13-1. This is the root of the automa‐

tion fear spiral. 4

Figure 13-1. Ad hoc automation scripts have unpredictable results

Autonomic Automation

In order to get the assurance that the right configuration will be applied even without

someone having to think about it, the team could create a script, or a collection of

scripts, that will be run every time a new web server is created. Ideally, they’d run

these scripts periodically to ensure configuration stays the way they’d like. This gives

them continuous configuration synchronization (as described in Chapter 4).

The aim is to have infrastructure management systems that work autonomically. In

physiology, autonomic functions happen without conscious effort (e.g., breathing or

heart rate). You might be able to override some of these (e.g., by holding your

breath). But you don’t normally need to think about doing it.

4 The automation fear spiral was introduced in “Automation Fear” on page 9 in Chapter 1.

260 | Chapter 13: Workflow for the Infrastructure Team

Autonomic automation is the secret to making infrastructure as code work reliably.

When the team finds a new web server configuration option that improves security,

they embed that into their automation tooling. They know that it will be applied to all

relevant servers, current and future, without anyone having to think about it again.

The team also knows that the automation is continuously reapplied. So if any change

is made that will break the automation, it will be discovered immediately and can be

fixed right away. The infrastructure is always kept consistent, and the automation is

always workable.

Configuration tools like Chef or Puppet are designed to work autonomically, with

their declarative syntax and idempotent operation. 5 But it isn’t the tool that makes

infrastructure autonomic. System administrators have been writing scripts to carry

out tasks autonomically for decades.

On the flip side, there are IT operations teams who use tools like Ansible, Puppet,

and Chef for ad hoc automation. They write a configuration definition when they

want to make a change, but only run the tool to apply it as a one-off. This is common

for teams who aren’t experienced with infrastructure as code, as it’s a way of using

old habits and working practices with new tools. But it doesn’t help to shift the team’s

workload onto the tools. Running the automation tool by hand, ad hoc, makes it less

likely it will just work. So routine tasks still need the close involvement of a human.

Tools Versus Automation

In The Practice of Cloud System Administration (Addison-Wesley),

Limoncelli, Chalup, and Hogan talk about tool building versus

automation. Tool building is writing a script or tools to make a

manual task easier. Automation is eliminating the need for a

human to carry out the task. They make the comparison to an auto

factory worker using a high-powered paint sprayer to paint car

doors, versus having an unattended robotic painting system.

Autonomic Automation Workflow

With infrastructure as code, when engineers need to make a change, they start by

checking out the relevant files out from VCS. They might do this on a local worksta‐

tion or else in a home area on a remote machine. The files are typically configuration

definitions, scripts, configuration files, and various other things.

In a simple workflow, the engineer makes the change to their local files and then

commits the modified files back to the VCS. The commit triggers the change man‐

agement pipeline, as described in the previous chapter. Depending on how the team

5 As described in “Choosing Tools for Infrastructure as Code” on page 42 in Chapter 3.

Automate Anything That Moves | 261

has designed their pipeline, the change might be automatically applied to the target

environments if the pipelines stages pass. Or the pipeline could have one or more

approval stages, where a person reviews the results of tests before pushing them out

to production infrastructure.

This process can take a while. The time it takes for the change to roll out to all the

servers may be over an hour if, for example, there is an hourly schedule for configu‐

ration agents to run on servers to pull and apply the latest configuration. Even find‐

ing out whether the change works correctly on test servers may take a matter of

minutes.

This can be a very slow loop: edit the file, commit, wait, see a red build, read the logs,

edit the file, repeat. A person who is accustomed to just logging onto a server to edit

the file and see whether it works may be forgiven for deciding pushing changes

through a pipeline is a ridiculous way to work. Fortunately, there are better ways,

such as using a local sandbox to work on changes.

Using a Local Sandbox

A sandbox is an environment where a team member can try out changes before com‐

mitting them into the pipeline. It may be run on a local workstation, using virtualiza‐

tion, or could be run on the virtualization platform. Both of these options are

explained in more detail later in this chapter.

Ideally, team members can reproduce the key elements of their infrastructure in a

sandbox and run automated tests against them. This gives them confidence that

they’ve got the change right before committing it. Figure 13-2 shows how this fits

into the flow of a pipeline. Checking changes before committing reduces failures and

red builds in the pipeline, which improves the overall productivity of the team.

The tooling for testing pre-commit changes needs to be easy to set up and maintain

or else people will avoid using it. This is yet another of those practices where good

habits lead to a virtuous cycle. Use it often, fix problems immediately, and remove

anything that makes it awkward to use. Letting things slip discourages people from

using the toolset, which will cause it to become out of date and even less pleasant to

use.

One of the key principles for making a sandbox environment work is consistency.

The sandbox needs to represent the real infrastructure well enough that everyone is

confident changes that work in one place will work in the other.

262 | Chapter 13: Workflow for the Infrastructure Team

Figure 13-2. Testing in local sandbox before committing to the pipeline

The most reliable way to achieve this is to use the same tools and configuration across

sandbox and real infrastructure wherever possible. The same operating system builds,

server configuration tools and definitions, and even network configuration where rel‐

evant, should be used across the board.

This should happen naturally; the entire purpose of a local sandbox is to develop and

test infrastructure configuration. Normally, team members will routinely destroy

their sandbox when they aren’t using it, rebuilding it from scratch when they sit

down to do some work. This keeps the sandbox up to date and proves the automation

works correctly.

Using Local Virtualization for a Sandbox

Developing and testing server configuration definitions locally requires running vir‐

tual machines locally. There are a number of virtualization products designed for

running VMs on desktop and laptop systems, including Oracle’s VirtualBox,

Parallels, VMware Workstation, VMware Fusion, and Microsoft’s Hyper-V. People

running Linux can also use hypervisors like Xen and KVM.

Ideally, people should be able to start local VMs from the same server templates that

are used for starting servers in the real infrastructure. Chapter 7 described using the

Packer tool to build server templates. Packer can use a single definition file to gener‐

ate template images for multiple virtualization platforms, including local virtualiza‐

tion systems.

Infrastructure teams who generate server images automatically using a pipeline often

generate locally usable images at the same time that they generate images for the

Using a Local Sandbox | 263

infrastructure. This ensures that people always have the latest, consistently built

image available for developing and testing.

Vagrant6 is an invaluable tool for managing local sandboxes. Vagrant is essentially an

infrastructure definition tool like those described in Chapter 3, but designed for use

with local virtualization. Vagrant gives you an IaaS cloud on your desktop.

Vagrant uses a definition file to define compute (one or more VMs), networking, and

storage for an environment that can be created and run with a local virtualization

tool. Because the definition is in an externalized file, as with any infrastructure

defined as code, a Vagrant environment is reproducible. The entire environment can

be torn down, and then rebuilt with a single command. 7

A team can create a Vagrant definition file for its local sandbox environment and

commit it to their VCS. This definition can then be used by any member of the team

to easily spin up their own instance of the sandbox to develop and test in. New team

members can get started quickly. Improvements can be made to the definition file

and shared with the whole team. Anyone can reproduce an issue seen by their collea‐

gues.

Vagrant has hooks for server configuration tools including Ansible, Chef, and Pup‐

pet, which makes it easy to provision machines the same way they are provisioned in

the real infrastructure, and to test changes to them. It’s possible to tweak the Vagrant

setup in various ways—for example, to test only certain parts of the provisioning pro‐

cess to simplify and speed up testing.

Example 13-1 shows a Vagrant file that a team uses to test the configuration of their

Jenkins CI system. It downloads a server template from an internal web server, pre‐

sumably one built the same was as server templates for production. It then defines

two virtual machine instances, one for a Jenkins server, and one for a Jenkins agent.

Each of these virtual machines is configured by applying Ansible playbooks. These

playbooks, jenkins-server.yml and jenkins-agent.yml, are the same ones used to con‐

figure the production Jenkins servers and agents.

Example 13-1. Sample Vagrantfile

Vagrant.configure('2') do |config|

# Use a standard base image to build new machines

config.vm.box = "centos-6.5"

config.vm.box_url =

'http://repo.local/images/vagrant/centos65-x86_64-20141002140211.box'

6 Not coincidentally, Vagrant is made by HashiCorp, the same company that makes Packer.

7 That single command is vagrant destroy -f ; vagrant up. I admit this is cheating slightly.

264 | Chapter 13: Workflow for the Infrastructure Team

# Define the Jenkins server

config.vm.define :jenkins_server do |server|

server.vm.hostname = 'jenkins_server'

# Set the IP address so the agent can find it

server.vm.network :private_network, ip: '192.1.1.101'

# I can use http://localhost:8080 to access the server

server.vm.network "forwarded_port", guest: 80, host: 8080

# Run Ansible, using the "jenkins_server" role

server.vm.provision "ansible" do |ansible|

ansible.playbook = "jenkins-server.yml"

ansible.sudo = true

ansible.groups = {

"jenkins_server" => ["jenkins_server"]

}

end

end

# Define the Jenkins agent

config.vm.define :jenkins_agent do |agent|

agent.vm.hostname = 'agent'

agent.vm.network :private_network, ip: '192.1.1.102'

# Run Ansible, using the "jenkins_agent" role

agent.vm.provision "ansible" do |ansible|

ansible.playbook = "jenkins-agent.yml"

ansible.sudo = true

ansible.groups = {

"agent" => ["jenkins_agent"]

}

end

end

end

Example Workflow with Local Testing

Your workflow to make a change using a local sandbox with the Vagrant definition in

Example 13-1 might look something like this:

1. Check out the latest versions of the Vagrantfile, Ansible playbooks, and test

scripts from VCS.

2. Build the local VMs (vagrant up).

3. Run the automated test scripts to make sure everything works.

4. Write an automated test for the change you plan to make.

5. Edit the Ansible playbooks to implement the change.

Using a Local Sandbox | 265

6. Apply the change to the local VMs (vagrant provision).

7. Run the tests to see if they work. Repeat steps 4 through 7 until happy.

8. Update the files from VCS again, to merge any changes that other people have

made since you checked out in step 1.

9. Destroy and rebuild the local VMs (vagrant destroy -f ; vagrant up) and

run the tests again to make sure everything still works after the merge.

10. Commit your changes to VCS.

11. Verify that the changes pass successfully through the pipeline’s automated stages.

12. Once the changes reach production, verify that everything works the way you

wanted.

In practice, people experienced with this workflow like to make the smallest change

they can get away with and run it through this workflow. When you get into a good

rhythm, you might commit a change at least once an hour.

Personally, I occasionally fall out of this rhythm and make a very large set of changes

locally before I commit them. I inevitably suffer when I find that I’ve built up uncom‐

mitted local changes. Other people have usually made changes that affect what I’ve

done, forcing me to rework things. The longer my changes have built up—a day, sev‐

eral days—the worse it is.

Keeping the whole change/commit cycle short needs some habits around how to

structure the changes so they don’t break production even when the whole task isn’t

finished. Feature toggles and similar techniques mentioned in Chapter 12 (“Practice:

Prove Production Readiness for Every Change” on page 237) can help.

The advantage of working this way is your changes are constantly integrated and tes‐

ted with everything everyone else is doing. Other people can see what you’re doing

and easily pick up the task for you if you are interrupted by other priorities.

Using the Virtualization Platform for Sandboxes

In some cases, local infrastructure development environments are either not feasible,

or they can’t meaningfully represent the real infrastructure platform. For example, a

team’s infrastructure might make extensive use of services provided by a cloud plat‐

form, to the point where duplicating or mocking these on local VMs is too much

work.

In this situation, members of the team can run sandbox environments on the main

infrastructure platform. Rather than using something like Vagrant to run infrastruc‐

ture locally, a team member spins up their own copy of the relevant infrastructure in

the cloud. Figure 13-3 illustrates the flow. The team member works on infrastructure

definitions locally and applies them to a hosted sandbox environment, using the same

266 | Chapter 13: Workflow for the Infrastructure Team

tools, scripts, and definitions used to manage testing and production environments.

Once they are happy with the changes, they commit their changes to the VCS, which

triggers the pipeline to roll the changes out.

Figure 13-3. Testing in a hosted sandbox before pushing to the pipeline

Codebase Organization Patterns

One of the challenges for teams adopting infrastructure as code is finding a good way

to organize their codebase of definitions, scripts, and configuration files. A good

structure allows multiple team members to easily work on different tasks without

tripping each other up. For larger teams, codebase organization is even more impor‐

tant to allow teams to work independently, without needing complex processes, tool‐

ing, and roles to coordinate changes across them.

“Organizing Infrastructure” on page 158 discussed ways of organizing infrastructure

to keep things loosely coupled. As mentioned in “Pipelines, Architecture, and Teams:

Conway’s Law” on page 245, there is a direct relationship between the system archi‐

tecture, team structure, and the design of the change management pipeline. When

these three elements are well aligned, the proof is in the workflow: people and teams

are able to easily get their jobs done with few coordination issues. When they aren’t

aligned, it shows up in the workflow.

There are three main patterns used for organizing larger codebases: branching, one

trunk per component, and single trunk. 8

8 It’s informative to see how other organizations manage their workflows. Jon Cowie has presented “Workflow

Design: Extracting Signal From the Noise - ChefConf 2015”, and the folks at Chef have created an RFC docu‐

menting several workflows.

Codebase Organization Patterns | 267

Antipattern: Branch-Based Codebases

Branches can be useful for short-lived, tactical purposes. However, it works poorly as

a method of organizing work across multiple teams. This point has been belabored in

this book (“Continuous Integration (CI)” on page 183) and elsewhere, but it’s contro‐

versial because it’s so commonly accepted.

Rather than reiterating these arguments here, I’ll make a single suggestion for teams

that do use branching. Measure the cycle time and analyze the value stream for a sin‐

gle change, as discussed in more detail later in this chapter. Consider how much of

the cycle time is spent in activities due to merging and post-merging testing activities.

Moving to either of the trunk-based approaches discussed in this chapter should

completely eliminate the need for these activities. If your team uses short-lived

branches, and spends little or no time merging and testing after merges, then there is

not much to be gained by switching. But most teams that use branches routinely

spend days or weeks massaging the codebase after merges before they’re able to put

them into production.

Merge Monkeys

“Monkey” roles are often found on teams to take care of routine tasks that don’t

directly add value to the team. Many software development teams used to have a

“build monkey” who made sure the software compiled properly. Better automation

practices have made this particular role obsolete. 9 But it’s still common to assign team

members to clean up the messes that unoptimized engineering practices produce.

I once saw a team of a few dozen developers which had two developers assigned full-

time to merging code branches in the VCS repository. This should have been a clear

sign that they had too many people working on a poorly organized codebase.

Restructuring the code would have freed these people to do more valuable work.

Pattern: One Trunk per Component

Keeping the code for each component or service in its own VCS repository project is

arguably the most common approach for teams working with a microservices-style

architecture. This allows people to check out the component locally and work on it

independently of work being done on other components.

The challenge with this pattern is when a change involves modifying parts of more

than one component. It isn’t difficult to check out all of the affected components so

9 Although many teams still have similar roles. To avoid appearing unfashionable, they often misapply the term

“DevOps” as a title for the person who maintains the automated build and CI tooling.

268 | Chapter 13: Workflow for the Infrastructure Team

you can work on them and test them locally. But when you commit the changes, the

components may not progress evenly through the pipeline. One of the changed com‐

ponents may reach a downstream stage before the other, failing tests because it is

being integrated with an older version of the other component.

This can be managed by making the components version tolerant (“Practice: Use

Version Tolerance” on page 253), but does add complexity.

Pattern: Single Trunk

An alternative to giving each component its own VCS project is to keep all of the

source together in a single project. This forces the entire codebase to be consistent for

a given commit. It also simplifies the problem of keeping different components work‐

ing together; developers can’t commit changes without ensuring that everything they

have changed works and passes their tests.

The challenge with this approach is that it requires a different approach to tooling for

building and CI, especially at scale. It should be easy to run only the tests that apply

to code that has been changed, rather than being forced to run the full test suite for

all of the components. Similarly, only the pipeline stages for modified components

should be run after the change is committed.

This approach, sometimes called scaled trunk-based development, is used by Google among others. Very few publicly available tools are designed to support this way of

working. Google has created custom tooling to manage their codebase like this.

Workflow Effectiveness

Every team wants to work more effectively. It is important for teams to have an

awareness of what effectiveness means for them. Is it being able to respond to busi‐

ness needs quickly? Is it to ensure high levels of availability? The team and its stake‐

holders should discuss and agree on the high-level values for the team before moving

on to decide on metrics. 10

Expediting Changes

An ineffective workflow, or an overloaded team, becomes a particular problem when

a production issue needs to be correctly quickly. Many teams consider creating a sep‐

arate process to expedite emergency changes.

10 The section “Measuring Effectiveness” on page 311 in Chapter 15 touches on some common metrics for meas‐

uring the effectiveness of a team’s workflow, and techniques for measuring and improving them.

Workflow Effectiveness | 269

The Best Process for Emergency Fixes Is the Normal Process

If your organization finds itself considering a special, separate pro‐

cess for expediting emergency changes, this is a sign that the nor‐

mal process has issues. Rather than creating a separate process, the

organization should look at improving the normal process.

An emergency change process can speed things up in two different

ways. One is to leave out unimportant steps. The other is to leave

out important steps.

If you are able to identify steps that can be safely removed for an

emergency process, chances are they can be safely removed from

your normal process as well. In lean process theory, these steps are

called waste.

And an emergency situation is the worst time to leave steps out of a

process when those steps truly add value—for example, activities

that help to catch errors. These are high-pressure situations, when

humans are most likely to make a mistake. And mistakes at these

times tend to compound the original problem, often turning a

small outage into a disaster.

Rather than designing an emergency change process by starting

with a “proper” process and removing steps, consider designing the

normal process by starting with the bare minimum of steps that

you would need in an emergency process.

The largest part of most change processes, and the part that tends to get cut in emer‐

gencies, is up-front reviews of planned changes. The practices described throughout

this book should reduce the need for these. Automating the process for applying

changes with testing and monitoring reduces the chance of an error slipping through

to production. They also make it much quicker to detect and fix errors that do slip

through.

Code Reviews

There is still a need for human involvement in quality control of individual changes.

Some development teams use pair programming to ensure that two people are

involved in making any change, acting like a continuous code review. Although this

may seem wasteful, it’s far more effective than having someone review code after it’s

written. Code reviews done after a delay may be skimped or skipped. Even when

done thoroughly, feedback from a code review requires someone to go back and re-

implement a change. All too often, code reviewing becomes a wasteful activity that

doesn’t lead to improvements actually being made to code. Pair programming is

more rigorous, with input from two people leading to better design and improve‐

ments made in real time. This is obviously in addition to benefits of knowledge shar‐

ing, learning, and shared code ownership.

270 | Chapter 13: Workflow for the Infrastructure Team

Changes made through source control and automated application can also be

reviewed afterward. This makes it possible to monitor the quality of work and sys‐

tems design, without having to put changes through a process bottleneck. Many

teams, especially distributed teams, automatically send emails with each change made

to a mailing list. Peers and leaders can review changes and give feedback, sparking

team discussions that help to shape common styles and practices.

Fitting Governance into the Workflow

For many organizations, especially larger ones and those subject to detailed legal reg‐

ulations, governance is a major concern. “Governance” refers to the processes that

ensure that work is carried out according to relevant policies, to ensure efficiency and

legal compliance.

Governance is sometimes a sticking point for organizations adopting technology and

methodologies that enable frequent, rapid changes with short turnaround times.

There is often a concern that changes made too quickly will bypass proper gover‐

nance, creating risk of operational problems, security breaches, or even criminal vio‐

lations. On the other side, there can be a perception that governance processes are

wasteful and unnecessary.

Infrastructure as code seeks to manage risks more effectively, and also to enable fast

delivery, through automation. Instead of implementing systems manually based on

detailed specification documents, teams generate systems automatically based on

configuration definition files. Rather than throttling work through gates, which are

limited by the scarce time of specialist reviewers, work can be rapidly and repeatedly

validated by automated tests. 11

Manual gates add considerable time to the process of making a change, as shown in

Figure 13-4. Often, the time spent actually reviewing the change is much less than the

delays waiting for people to become available, writing documentation, filling in

request forms, and other overhead from the process itself.

Figure 13-4. Workflow with manual gates

11 See Chapter 11 for more on automating operational quality tests, in particular, the section “Testing Opera‐

tional Quality” on page 211.

Workflow Effectiveness | 271

The adage “too many cooks spoil the broth” applies here. Dividing the responsibility

for a change across many people not only makes it difficult to coordinate, it also

reduces awareness of the big picture. Specialists focus on the narrow part of the sys‐

tem they are responsible for, and lack awareness of the impact their work has on

other parts of the system.

Automated validation can dramatically reduce delays and help to scale the number of

projects and changes that specialists can manage. These specialists, who include tech‐

nical specialists and those with governance responsibilities, can invest their time and

energy in ensuring the automated validation works well, rather than spending their

time reviewing each individual change. They can regularly audit the automation and

validation scripts, as well as samples of change history and the resulting systems, to

ensure that changes are being correctly handled. Figure 13-5 removes the manual

work from the main workflow.

This approach to governance of change management has several benefits:

• Changes are made consistently and reliably, rather than depending on individu‐

als to follow documented processes they may find tedious and inconvenient.

• Changes are logged, which improves the auditability of what was done, by whom,

how, and why.

• Specialists spend less time on routine inspections and reviews, which allows

them to spend more time raising the level of the governance tooling, and coach‐

ing other teams on their areas.

• Teams making changes are responsible for making them correctly, and so gain a

deeper understanding of the theory and practice of operational concerns such as

security.

Figure 13-5. Workflow with automated compliance testing

272 | Chapter 13: Workflow for the Infrastructure Team

An issue discovered by a manual governance gate late in the process is likely to be

either ignored, or papered over with a shoddy workaround. Automated, continuous

validation catches issues much sooner, when there is still time to make a meaningful

correction. This enables people to take a more evolutionary, iterative approach to

designing solutions based on proving implementations, rather than forcing compli‐

ance to speculative up-front designs. The outcomes are not only delivered more

quickly, but with higher standards of quality.

Conclusion

When a team adopts infrastructure as code, its members should find themselves

spending less time carrying out routine activities, and more time improving the sys‐

tem itself. The workflow for making changes will tend to be more indirect, but a well-

designed process and toolset should give fast feedback and be able to apply changes

quickly. It’s important that the routine process for making changes is fast and effec‐

tive enough that it can handle emergency fixes reliably and thoroughly enough to sat‐

isfy requirements for quality and compliance.

The next chapter delves more deeply into questions of operational quality. How can

dynamic infrastructure and infrastructure as code be leveraged to ensure continuous

service in the face of disruption?

Conclusion | 273

CHAPTER 14

Continuity with Dynamic Infrastructure

The previous chapters in this part of the book have focused on how to make changing

infrastructure configuration easy while also maintaining high levels of quality,

through testing, using an automated change pipeline, and effective workflows. This

chapter is concerned with the operational quality of production infrastructure.

I use the term “continuity” as a catchall for operational quality. The goal of continuity

is for services to be continuously available to users without interruption. Services

should perform quickly and correctly. Data should be available and correct. Mali‐

cious people should not be able to compromise the service in any way. If something

goes wrong, it should be quickly detected and recovered, with little or no impact to

users.

The traditional approach to continuity is to limit and control change. Any change

creates the risk of breaking something. 1 So processes and systems focus on minimiz‐

ing the number of changes and thoroughly evaluating each change before it is made.

Dynamic infrastructure disrupts this approach, in pretty much every sense of the

word. Systems are constantly being changed. Resources may be added, removed,

resized, and reconfigured throughout the day. Early morning maintenance windows

aren’t compatible with the need to automatically scale a server pool to adjust to

hourly traffic patterns. Continuous change feels like a recipe for continuous outages.

The modern organization’s imperative for quick turnaround of IT changes only adds

to the sense of chaos and anarchy. Agile software projects, Lean MVPs (minimum

1 According to the Visible Ops Handbook, 80% of unplanned outages are caused by changes made by staff.

275

viable products), and cross-functional product teams2 mean more people are making

more changes, more often, with less time spent analyzing their impact.

The goal of infrastructure of code is to flip the speed-versus-stability dynamic on its

head. Rather than fighting the tide of pervasive change, organizations can take advan‐

tage of the ease of making changes to continuously improve operational continuity.

Rather than degenerating into post-apocalyptic chaos, the system can be made more

reliable than ever before.

This chapter explains how to use dynamic platforms and the principles of infrastruc‐

ture as code to achieve high levels of operational quality. The aspects of continuity

discussed in this chapter include:

Service continuity

Keeping services available to end users in the face of problems and changes

Data continuity

Keeping data available and consistent on infrastructure that isn’t

Disaster recovery

Coping well when the worst happens

Security

Keeping bad actors at bay

Service Continuity

System components fail. Software crashes. Resources become exhausted. Even when

there are no unplanned issues like these, people make changes. They upgrade systems

and software. They add, remove, or reallocate resources. They deploy new applica‐

tions and integrate them with existing ones. They deploy updates. They optimize

configurations.

The goal of service continuity is to ensure that users don’t notice any of this, except

for the pleasant discovery of new features and faster responsiveness.

Continuity is often discussed in terms of uptime or availability. Sometimes, however,

these are defined in ways that don’t take the full picture into account.

True Availability

Many IT service providers use availability as a key performance metric or SLA. This

is a percentage, often expressed as a number of nines: “five nines availability” means

that the system is available 99.999% of the time.

2 I’ll talk more about cross-functional teams in the next chapter.

276 | Chapter 14: Continuity with Dynamic Infrastructure

But it’s common practice for providers to caveat this tough-sounding SLA with a

qualifier about “unplanned” outages. That is, if they deliberately take the system off‐

line for planned maintenance or upgrades, it doesn’t count against their availability,

as long as they let users know ahead of time.

Availability excluding planned downtime has value as a metric. It helps teams to

measure how well they’re doing to manage unexpected failures. But it doesn’t meas‐

ure how well the team is doing at minimizing the impact of planned changes. In some

situations, this may be acceptable; it may be that the system’s users only use it at cer‐

tain times, such as during business hours.

True availability is the percentage of time the system is available and fully usable,

without exclusions. By tracking this number, a team raises its awareness of planned

changes. They can work to improve their processes, tooling, and system designs to

reduce the types of changes that require taking the system offline for users.

The Hidden Impact of Out-of-Hours Maintenance

At one organization I worked in, we measured the availability of a system that was

mostly used by people during working hours from 8 AM to 6 PM every day. This was

convenient for us, because we had a monthly batch operation that took most of a

night to complete.

However, the time to run the batch job grew as the size of our user base grew. When

it became too long to run overnight, we were forced to invest in changes to the soft‐

ware so the job could be split over multiple evenings. This was great for our metrics:

we were able to continue hitting our SLA targets, even as the job grew to take a full

week to complete on a nightly basis.

But this had a hidden cost. The overnight batch jobs required significant out-of-hours

work for our operations staff to set up, and then to break it off and bring the systems

back online in the morning. So our staff ended up working after hours and early

mornings for an entire week out of every month.

There were a number of solutions proposed to enable the batch work to run without

downtime, and without manual work. But these solutions required spending on soft‐

ware development work, which didn’t seem necessary to management. The existing

solution achieved the business target metrics, and the out-of-hours work was “free.”

The funds to implement the zero-downtime, automated processing solution were

only approved after three-quarters of the operations staff resigned.

Using Dynamic Server Pools for Recovery

Many dynamic infrastructure platforms have the capability to dynamically manage a

pool of servers. Amazon’s Auto Scaling groups is a well-known example of this. The

Service Continuity | 277

pool is defined by declaring a server template to use for creating new instances, and

rules that specify when to automatically add and remove instances from the pool. In

Example 14-1, the pool is declared as MyPool, and the details of how to launch a new

server instance are declared in MyPoolLaunch.

Example 14-1. AWS CloudFormation definition for an Auto Scaling group

"MyPool" :{

"Type" : "AWS::AutoScaling::AutoScalingGroup",

"Properties" : {

"AvailabilityZones" : [ "eu-west-1a", "eu-west-1b", "eu-west-1c" ],

"LaunchConfigurationName" : "MyPoolLaunch",

"MaxSize" : "10",

"MinSize" : "2"

}

},

"MyPoolLaunch" : {

"Type" : "AWS::AutoScaling::LaunchConfiguration",

"Properties" : {

"ImageId" : "ami-47a23a30",

"InstanceType" : "m1.small"

}

}

In addition to handling changes in workload, dynamic pools can automatically

replace failed servers. The platform uses health checks to detect when a server is no

longer working correctly, at which point it can provision a new instance and destroy

the old one. Even servers running software not intended for clustering can take

advantage of this, by setting the pool with a minimum and maximum size of “1”. The

platform will then ensure there is always a single working instance of the server.

Using dynamic server pools effectively usually requires customizing the health check.

The default health check is likely to be based on response to a ping of the server. But

this will not detect when the application running on the server has a problem. So it

may be desirable to have a check of a particular network endpoint on the server, or

even a specific result string or response code.

A pitfall of using dynamic pools to automatically replace failed servers is that it can

mask a problem. If an application has a bug that causes it to crash frequently, it may

take a while for people to notice. So it is important to implement metrics and alerting

on the pool’s activity. The supporting team should be made aware when a server

instance fails, even if it’s replaced without interrupting service. The team should be

sent critical alerts when the frequency of server failures exceeds a threshold.

278 | Chapter 14: Continuity with Dynamic Infrastructure

Not all applications are designed to run on dynamic infrastructure, so may not grace‐

fully handle having servers automatically replaced. The next section discusses this in

more detail.

Software Design for Dynamic Infrastructure

Traditionally, software has been written with the assumption that the infrastructure it

runs on is static. Installing a new instance of the software, even in a cluster, is not a

routine event, and probably requires some manual work. Removing an instance of

the software from a cluster can be disruptive.

Software that has been designed and implemented with the assumption that servers

and other infrastructure elements are routinely added and removed is sometimes

referred to as “cloud native.” Cloud-native software handles constantly changing and

shifting infrastructure seamlessly.

12-Factor Applications

The team at Heroku published a list of guidelines for applications to work well in the

context of a dynamic infrastructure, called the 12-factor application.

Some of the items on the 12-factor application list are implementation-specific. For

example, there are alternatives to using environment variables for configuration.

However, they each point to an important consideration that an application must

take into account in order to play nicely in a dynamic infrastructure.

I. Codebase

One codebase tracked in revision control, many deploys.

II. Dependencies

Explicitly declare and isolate dependencies.

III. Config

Store config in the environment.

IV. Backing services

Treat backing services as attached resources.

V. Build, release, run

Strictly separate build and run stages.

VI. Processes

Execute the app as one or more stateless processes.

VII. Port binding

Export services via port binding.

Service Continuity | 279

VIII. Concurrency

Scale out via the process model.

IX. Disposability

Maximize robustness with fast startup and graceful shutdown.

X. Dev/prod parity

Keep development, staging, and production as similar as possible.

XI. Logs

Treat logs as event streams.

XII. Admin processes

Run admin/management tasks as one-off processes.

The phrase lift and shift describes installing software that was written for static infra‐

structure (i.e., most software designed with legacy, pre-cloud assumptions) onto

dynamic infrastructure. Although the software ends up running on a dynamic infra‐

structure platform, the infrastructure must be managed statically to avoid breaking

anything. These applications are unlikely to be able to take advantage of advanced

infrastructure capabilities such as automatic scaling and recovery, or the creation of

ad hoc instances.

Some characteristics of non-cloud-native software that require “lift and shift”

migrations:

• Stateful sessions

• Storing data on the local filesystem

• Slow-running startup routines

• Static configuration of infrastructure parameters

For example, it’s unfortunately common for applications to need configuration files

that set the IP addresses of infrastructure elements such as databases. If the number

or location of one of these elements changes, updating the configuration file may

involve rebooting the application so that it picks up the changes.

Lift and shift is often necessary when there are components of a system or service

that will take considerable time and expense to replace with cloud-native software. As

of this writing, most established enterprise software vendors release products for on-

premise installation (i.e., as opposed to SaaS offerings) that are not designed as cloud-

native. But this is legacy, because the products were developed before dynamic

infrastructure become mainstream. These vendors are changing their strategy to pro‐

280 | Chapter 14: Continuity with Dynamic Infrastructure

vide hosted SaaS solutions, rewriting their software to be cloud-native, or else are

holding out until they are superseded by competitors that do make the move.

Building on Unreliable Infrastructure

At cloud-scale, you can be sure hardware will fail. This is true even with hardware

engineered for high reliability. At a scale of tens of thousands, or hundreds of thou‐

sands of servers, even 99.999% reliability means you will have failures. So you’re

forced to design your systems to tolerate hardware failure.

The economics of this scale have led companies operating large-scale infrastructures,

including Google, Facebook, and Amazon, to build their infrastructure using cheap

commodity hardware. Paying top price for more reliable hardware doesn’t make

sense when they need to build resilience into your systems and software in any case.

They know their systems will cope with the inevitable failures, so it is more cost effec‐

tive to simply replace the hardware when it fails.

Sam Johnston described the shift from unreliable software (with low tolerance for

instability in its infrastructure) running on reliable hardware to reliable software run‐

ning on unreliable hardware.

Compartmentalizing for Continuity

The architectural principle of preferring small, loosely coupled pieces can help with

continuity. For example, there is a trend toward breaking single, monolithic monitor‐

ing server processes into multiple services.3 The smaller services handle aspects of

monitoring, one polling infrastructure elements to determine state, another storing

state information, and other processes that handle sending out alerts, providing a sta‐

tus dashboard, and graphing dashboards.

One benefit is that a failure of one component can leave at least some capabilities in

service. For example, a dashboard failing doesn’t stop alerts being sent out. It is often

easier to scale smaller individual services out for redundancy than it is with a large

monolithic service. And of course it’s easier to fix, update, and upgrade smaller serv‐

ices, with less impact to the overall service.

It’s also often preferable to split a given type of tool into multiple instances. For

example, some organizations aspire to have a single instance of their configuration

management server, CI system, etc., which all teams in the organization will share.

But this creates unnecessary challenges to continuity. A single team can potentially

cause problems for other teams using the same instance.

3 The open source Prometheus monitoring system is based on a microservices architecture.

Service Continuity | 281

If instances of the tool can be provisioned automatically, then it’s trivial to give each

team its own instance. This also helps with upgrades and maintenance, as it’s not

necessary to find a single time slot which all of the user teams will accept to take the

service down (assuming zero-downtime replacement is not an option, of course).

Zero-Downtime Changes

Many changes require taking elements of the infrastructure offline, or completely

replacing them. Examples include upgrading an OS kernel, reconfiguring a network,

or deploying a new version of application software. However, it’s often possible to

carry out these changes without interrupting service.

Making the service available around the clock, and avoiding the need for out-of-

hours work by staff are obvious benefits of zero-downtime changes. But a powerful

benefit that’s often overlooked is reducing a major barrier to continuous improve‐

ment.

Out-of-hours changes are fraught with risk, and tend to become bottlenecks. This

ends up delaying changes at best, discouraging them at worst. This in turn encour‐

ages a “good enough” culture, where minor problems and “known issues” are toler‐

ated. But being able to apply fixes and improvements at any time makes high quality

routine.

Many of the patterns in this section are based on zero-downtime application deploy‐

ment patterns. But they can be adapted to managing changes to infrastructure ele‐

ments, including networking, load balancing, and even storage devices.

The basic idea of zero-downtime deployment is obviously to change an infrastructure

element without interrupting service. All of the patterns described here involve

deploying the new version of the element while the previous version is still in use.

The change can be tested before the new element is actually used. Once it is tested

and considered ready, usage is switched over to the new element. The previous ele‐

ment can be kept running for a period, to offer a quick rollback if something goes

wrong with the new one.

Pattern: Blue-Green Replacement

Blue-green replacement is the most straightforward pattern to replace an infrastruc‐

ture element without downtime. This is the blue-green deployment pattern for soft‐

ware4 applied to infrastructure. It requires running two instances of the affected

infrastructure, keeping one of them live at any point in time. Changes and upgrades

4 The blue-green deployment pattern for software was described in Farley and Humble’s Continuous Delivery

book, and is documented in an article on Martin Fowler’s bliki.

282 | Chapter 14: Continuity with Dynamic Infrastructure

are made to the offline instance, which can be thoroughly tested before switching

usage over to it. Once the switch is made, the updated instance can be monitored for

a time, with the first instance kept ready to fail back if something turns out to be

wrong with the change. Once the change is proven, the old instance can be used to

prepare the next change. This sequence is illustrated in Figure 14-1.

Figure 14-1. Blue-green replacement

There are several challenges with blue-green deployments. They do require more

intelligent routing, as discussed in “Routing Traffic for Zero-Downtime Replace‐

ments” on page 286. The time needed to switch over between instances can become

unmanageable with larger systems. And handling data can be quite complicated for

zero-downtime. All of these challenges are discussed later in this chapter.

Pattern: Phoenix Replacement

Phoenix replacement is the natural progression from blue-green using dynamic

infrastructure. Rather than keeping an idle instance around between changes, a new

instance can be created each time a change is needed. As with blue-green, the change

is tested on the new instance before putting it into use. The previous instance can be

kept up for a short time, until the new instance has been proven in use. But then the

previous instance is destroyed. Figure 14-2 shows this process.

The phoenix approach makes more efficient use of infrastructure resources. It also

regularly exercises the process for provisioning infrastructure, which has side bene‐

fits. Problems with the provisioning process are made visible quickly, presumably in a

test environment. And when infrastructure is routinely provisioned and reprovi‐

sioned for changes, doing it in an emergency is less fraught than if it’s an unusual

activity.

Zero-Downtime Changes | 283

Figure 14-2. Phoenix replacement

Phoenix replacement is the foundation for continuous disaster recovery, as described

later in this chapter. It’s also the basis for the phoenix server pattern and immutable

infrastructure. 5 These extend the phoenix replacement pattern to become the only

method for changing the configuration of a server.

Practice: Reduce the Scope of Replacement

Applying blue-green and phoenix replacement patterns becomes impractical for large

sections of infrastructure. If making a change using these patterns becomes unwieldy,

the system design should be evolved to break it into smaller, independently deploya‐

ble pieces. This aligns with the architectural theme of small, loosely coupled pieces

that runs throughout this book. Figure 14-3 shows how a single server within a set of

servers is replaced using the blue-green approach.

5 See “Pattern: Phoenix Servers” on page 137 and “Immutable Servers” on page 135 in Chapter 8.

284 | Chapter 14: Continuity with Dynamic Infrastructure

Figure 14-3. Replacing a sub-section of the system with blue-green deployment

One organization I worked with implemented blue-green using a second data center

that had originally been provisioned for DR. Their application was a set of interrela‐

ted services, which they would deploy to whichever data center was currently not live.

Once the new release was fully tested, they would switch over. This worked well for a

while, and they were able to release daily if they chose.

But over time it became a heavy process. Data needed to be synchronized between

the two data centers for a new release, and before long this was taking an hour or

more. It was becoming difficult to manage even a weekly release. This was an espe‐

cially annoying limitation for smaller changes.

So the team decided to break the release process down by service. It took some work

to ensure that each service could be deployed on its own, but it radically improved

their ability to make changes quickly and more often. 6

Pattern: Canary Replacement

Most of the replacement patterns described become difficult or impossible with

larger-scale systems with a large number of identical elements. When a team has

hundreds of instances of a single element, it may be too expensive to maintain

enough resources to duplicate the production instance. Organizations like Google

and Facebook typically use the canary release pattern for this reason.

The canary pattern involves deploying the new version of an element alongside the

old one, and then routing some portion of usage to the new elements. For example,

6 The advice in Chapter 12 on scaling pipelines (“Scaling Pipelines to More Complex Systems” on page 238) is

particularly relevant.

Zero-Downtime Changes | 285

with version A of an application running on 20 servers, version B may be deployed to

two servers. A subset of traffic, perhaps flagged by IP address or by randomly setting

a cookie, is sent to the servers for version B. The behavior, performance, and resource

usage of the new element can be monitored to validate that it’s ready for wider use.

Figure 14-4 shows the canary pattern.

Figure 14-4. Canary replacement

The rest of the instances can then be incrementally replaced, until either a problem is

discovered that triggers a rollback, or else until the release is complete.

Dark Launching

Unlike the other patterns described in this section, dark launching doesn’t involve having multiple versions of an element deployed at the same time. Instead, a new version of an element is deployed and put into use, but with the new feature hidden from

human users.

This is particularly useful for testing new features at scale. Test script can exercise the

feature on the production deployment before it is ready for users to see. The team

needs to pay close attention to monitoring, so they can shut the test down if it seems

to have a negative impact for users.

This approach is often the only way to gauge the performance and operational impact

in very large-scale systems.

Routing Traffic for Zero-Downtime Replacements

The descriptions of these patterns make it sound simple to replace infrastructure ele‐

ments without downtime. But in practice, they add complexity for all but the simplest

cases. The complexity is often worth it in order to keep services running without

interruption in an environment that is continuously changing, but it’s important to

understand how to implement it.

Zero-downtime change patterns involve fine-grained control to switch usage between

system components. The mechanism for doing this will depend on the type of com‐

286 | Chapter 14: Continuity with Dynamic Infrastructure

ponent. Web-based applications and services (i.e., those using the HTTP and/or

HTTPS protocols) are an extremely common case. A standard HTTP/S load balancer

can often be used to enable zero-downtime deployments.

A simple way to implement this is to exclude the newly provisioned elements from

the load balancer until they’ve been tested and made ready. This is shown in

Figure 14-5. They might not be included in the load balancer pool, or could be

included but configured in a way that causes them to fail the load balancer’s health

check.

Figure 14-5. The load balancer can exclude new servers from the pool

This is unlikely to create a smooth transition once the new servers are added, and the

old ones removed.

Another option is to have two load balancer pools, one for the new set of servers and

one for the old, as shown in Figure 14-6.

Figure 14-6. Routing traffic to two load balancer pools

A router in front directs traffic to the correct load balancer pool. This allows the test‐

ers to access the new set of servers using the second pool’s URL, before it is made

available to the public. The router switches traffic to the new pool once it’s ready.

This can be extended for the canary pattern with some additional functionality on the

router. Users can be conditionally routed to one pool or the other, as illustrated in

Figure 14-7.

Zero-Downtime Changes | 287

Figure 14-7. Routing for canary changes

Different approaches can be used to route traffic. Users can be selected randomly,

based on IP address, geographical region, or by explicitly opting-in (this is often done

for user interface changes). Cookies can be set to ensure that, once selected, a user is

consistently directed to the same pool of servers.

Most organizations that implement this type of approach end up writing customized

routing. This gives them control to manage how users are selected, and to adjust the

balance of users between pools as the rollout progresses. Connection draining is also

useful, to ensure that all of the sessions using the old pool have completed before the

pool is completely removed from service.

Zero-Downtime Changes with Data

Data creates a particular challenge for zero-downtime change strategies. All of the

patterns described involve running multiple versions of a component simultaneously,

with the option to roll back and keep the first version of the element if there is a

problem with the new one. However, if the components use read/write data storage,

this can be a problem.

The problem comes when the new version of the component involves a change to

data formats so that it’s not possible to have both versions share the same data stor‐

age without issues.

This isn’t an issue when the data is read-only, because it can simply be copied, so that

the new version of the component uses its own copy of the data. If the data format

isn’t actually affected by the component versions, then it’s even easier, because the

component versions can still share the same data. This is usually the case with web

servers hosting static web content.

288 | Chapter 14: Continuity with Dynamic Infrastructure

Beyond these cases, it’s normally necessary for the component or application to be

written in a way that enables zero-downtime deployment in spite of the data. For

example, the component can be written to have a read-only mode that is activated

during upgrades. Or it can use a transaction log, so that changes written to one

instance of the data store can be replayed on the new instance after the upgrade is

complete.

An effective way to approach data for zero-downtime deployments is to decouple

data format changes from software releases. This requires the software to be written

so that it can work with two different data formats, the original version and the new

version. It is first deployed and validated with the data in the original format. The

data is then migrated as a background task while the software is running. The soft‐

ware is able to cope with whichever data format a given record is in. Once the data

migration is complete, compatibility with the old data format should be removed

from the next release of the software, to keep the code clean. 7

Data Continuity

Data persistence is a particular challenge with dynamic infrastructure. Zero-

downtime changes and cloud-native applications sound simple when you assume

everything is stateless. But real-world systems need data to be continuously available

and consistent. How can this be supported in an environment where every element of

the infrastructure is disposable?

There are many techniques that can be applied to this problem. A few include:

• Replicating data redundantly

• Regenerating data

• Delegating data persistence

• Backing up to persistent storage

These are not new8 or unique to dynamic infrastructure. But it’s worth touching on

how they may be applied in these situations.

Replicating Data Redundantly

A common approach to persisting data is to ensure it is replicated across multiple

instances, with redundancy. For example, a database cluster can duplicate data across

7 More information about this can be found in the book Refactoring Databases (Addison-Wesley).

8 There are many great references for managing data continuity in a distributed environment. Limoncelli,

Chalup, and Hogan cover this in Chapter 2 of The Practice of Cloud System Administration.

Data Continuity | 289

multiple nodes, or use a parity scheme, to ensure that it can be recovered if a node is

lost. This can provide data continuity with a certain level of tolerance, but if too many

nodes are lost at once, the data can’t be rebuilt. So this approach is typically useful as

a first line of defense, but is not a complete solution.

Tools Versus Automation

Clusters can actually be more fragile in an automated environment,

where a “DevOops” error (see “DevOops” on page 228) can quickly

tear across all of the servers in a cluster. A layered strategy for pro‐

tecting data mitigates against this.

Redundant data is particularly useful for replacing infrastructure. Servers in a data‐

base cluster can be upgraded or replaced sequentially, waiting for data to be replica‐

ted onto each new node before moving onto the next.

Multiregion infrastructure platforms offer the possibility to easily replicate data

across geographical areas. It may also be useful to partition database clusters and

manage different parts of the clusters separately. An upgrade may be applied to one

section of the cluster and tested before it is rolled out to the others.

Regenerating Data

Chapter 6 described the different things that go onto a server, including software,

configuration, and data (see “Types of Things on a Server” on page 105). Software

and configuration are managed through configuration management mechanisms, so

they can be built and rebuilt whenever needed. However, in some cases, things that

people think of as data can actually be treated like configuration.

Many systems use content that is created and curated in a separate system and then

loaded into a runtime system. The system that generates the data and is ultimately

responsible for it is the System of Record. If the system you are managing is not the

system of record, you may not need to invest as much in protecting the data. Instead,

you may be able to retrieve or regenerate the data.

Examples include geographical mapping data, publications and documents, catalogs,

medical guidelines, and reference data. In this situation, the runtime system may not

need to treat the data with the same care as it otherwise would.

Delegating Data Persistence

It’s often possible to delegate the storage of data to a dedicated service, perhaps one

run by another group. The classic example is a managed database service such as

AWS’s relational database service (RDS). Your own systems can write their data to

290 | Chapter 14: Continuity with Dynamic Infrastructure

the other service, and so don’t need to worry about persistence, assuming you can

trust the people managing the other service to do it well.

In one sense, this is cheating, passing the buck on the problem of data continuity. But

in another sense, this is a reasonable way to separate concerns. Even if your own team

needs to build and run the data persistence service, having it as a decoupled concern

simplifies the design of other parts of the system.

Other variations of this are using a storage area network (SAN) in a data center, or

even a distributed filesystem such as NFS or GlusterFS.

Backing Up to Persistent Storage

Most of the preceding approaches refer to handling runtime data. This is not enough

to protect against data corruption. Any mechanism that efficiently replicates data

across distributed storage will replicate corrupted data just as happily as good data. A

data availability strategy needs to address how to preserve and restore previous ver‐

sions of data.

This is another topic that is relevant beyond the use of dynamic infrastructure or

automation. However, there are a few recommendations to be made that are specific

to dynamic platforms.

Be sure to understand where your data is stored. A cloud platform creates the illusion

that everything is stored in some magical other dimension. But if your persistent

storage is actually sitting in the same rack as your compute servers, a single accident

can destroy everything. Be sure your data is archived in different physical locations.

Consider archiving data with a different vendor than your infrastructure platform.

This can often be done easily and securely, streaming data backups to a third-party

service over an encrypted connection.

Practice: Continuously proving backups

Make sure your backups are routinely retrieved and used so that it will become natu‐

rally obvious if they aren’t being stored correctly and completely. For example, you

could regularly rebuild a test environment by restoring backup data. Most experi‐

enced system administrators can share stories of running backups for years before

discovering, at the worst possible time, that they weren’t actually backing up the data

properly. Continuously proving that your backups are valid prevents this kind of

unpleasant discovery.

Data Continuity | 291

Disaster Recovery

Organizations have a disaster recovery (DR) plan to restore service when there is a

failure.9 Because a disaster is (hopefully!) an exceptional event, most IT organiza‐

tions’ DR plans involve unusual processes and systems, which are only rarely

exercised.

Extra infrastructure is provisioned and kept available. Extra servers, network connec‐

tions and devices, and even extra data centers are set up in different locations. If

something bad happens, service will be migrated to this extra infrastructure, routing

will be changed, and fingers will be crossed.

The finger crossing is important because the process to handle a disaster is rarely car‐

ried out, so its reliability is uncertain. Tests and exercises can be conducted to

improve confidence. But it’s not possible to test a complicated, exception-based DR

process every time configuration changes. So it’s a given that the recovery of the

infrastructure’s current configuration has almost never been accurately tested.

And many organizations lack the resources, particularly staff time, to invest in doing

this as often as they’d like. So in practice, most IT organizations accept a certain level

of risk that a disaster will not be handled flawlessly. People expect a disaster to be

painful and messy. So IT organizations hope that everyone will cut them some slack

—or simply hope that a disaster won’t happen.

But some IT organizations appear to cope with potentially disastrous situations with

ease. A major outage at a widely used hosting provider like AWS is followed by a list

of high-profile companies whose services were disrupted, and a few examples of

those who survived without their users ever noticing.

The key characteristic of those IT operations that handle outages smoothly, without

investing in military-grade bomb-proofing, is that their mechanisms for handling

disasters are the same mechanisms they use for routine operations. They practice

what could be called continuous disaster recovery.

Prevention Versus Recovery

Iron-age IT organizations usually optimize for mean time between failures (MTBF),

whereas cloud-age organizations optimize for mean time to recover (MTTR). This

isn’t to say that either approach ignores the other metric: organizations that strive to

avoid failures still want to be able to recover quickly, and those aiming for rapid

recoveries still take measures to reduce their occurrences.

9 See Wikipedia’s definition of disaster recovery.

292 | Chapter 14: Continuity with Dynamic Infrastructure

The trick is not to ignore one of these metrics in favor of the other. Arguably, tradi‐

tional approaches have sacrificed recovery time in hopes of eliminating all errors.

Making changes overly difficult may prevent some failures, but at the cost of making

it difficult to fix errors when they do occur.

However, embracing the goal of making it easy to rapidly recover from errors, by

making it easy to make changes, does not need to come at the cost of higher rates of

failure.

Continuous Disaster Recovery

An interesting thing about a dynamic infrastructure platform is that it looks a lot like

unreliable infrastructure. Servers routinely disappear and are replaced. This happens

when resources are automatically scaled up and down, and may even happen as a

byproduct of the mechanism for making routine changes, deploying software, and

running tests.

So the techniques for managing dynamic infrastructure can also be used to ensure

continuity when things fail.

Effectively handling continuity looks like a natural extension of day-to-day opera‐

tions. Recovering from a server failure is a trivial event: the server is automatically

rebuilt, using the same process that is used to scale up a cluster, or to roll out a new

server template. Larger-scale failures, such as a data center losing its network connec‐

tion, can be handled by automatically provisioning an environment in a different

data center. Again, this should be the same process used to build a test environment,

something that probably happens several times a week, if not several times a day.

This doesn’t happen without effort. You should make sure you have everything you

need to provision services available to other data centers. You need monitoring to let

people know when something goes wrong, and potentially to trigger recoveries.

The best way to ensure that your infrastructure can handle large-scale issues such as a

data center outage is to actually run services from multiple data centers. This is far

more reliable than simply having an additional data center ready on cold standby,

because all data centers are proven to be up to date and fully operational.

There are a few caveats to this approach. Enough infrastructure must be provisioned,

or the capacity to provision it made available, to cope with the full load when another

part of the infrastructure disappears. Spreading traffic between three data centers is

fine to continuously provide that all three are operational. But if, when one data cen‐

ter has a failure, the total traffic is more than the remaining two can handle, then

services will fail. Keep in mind that, in the event of a large-scale failure of a popular

hosting provider, your team may not be the only one scrambling to ramp up capacity

Disaster Recovery | 293

in other data centers. So consider ways to ensure you can get the capacity you need in

a pinch.

Also, it’s important to prove that redundant elements can actually work when their

peers are offline. Unintended dependencies between elements of an infrastructure

often creep in and only become apparent when they fail. Regular exercises that

involve taking parts of the system offline help to surface these dependencies. Auto‐

mating these exercises is the best way to ensure they take place frequently.

Netflix and the Simian Army

Netflix famously uses an automated tool called Chaos Monkey to prove its infrastruc‐

ture’s resilience to individual server failures. Chaos Monkey semi-randomly destroys

server instances, automatically. Staff have no notice of when this happens, so any

weaknesses introduced to their infrastructure are quickly identified.

This is routine.

Chaos Monkey is only one element of Netflix’s Simian Army. Another is the Chaos

Gorilla, which removes an entire data center (Amazon Web Services available zone)

from play to prove that the rest of the infrastructure can carry on uninterrupted.

Latency Monkey introduces artificial delays into client-server communication to see

whether upstream servers handle service degradation correctly.

Due to their aggressive, continuous validation of their DR process, Netflix routinely

survives failures of Amazon’s cloud infrastructure without interruption.

The DR Plan: Planning for Disaster

If your entire infrastructure was wiped out, what would you need to rebuild it? For

each vendor, imagine their service disappeared, along with everything you keep on it.

Could your scripts, tools, backups, and other systems be used to rebuild it and repo‐

pulate it quickly from a blank slate? How much time would it take? How much data

would be lost?

What if the vendor disappeared completely? Do you have what you need to start

fresh with another vendor? Are there vendors that provide a compatible service, or

would you need rewrite things to a new API? What could you do in the meantime?

Consider the infrastructure and services you manage yourself. Can you rebuild all of

it from scratch? How long would it take? What knowledge would it take? Ideally,

your scripts and tooling could reprovision servers, networking, and the like without

needing someone to remember and think through the right way to do key steps, and

without needing to refer to documentation that may well be out of date or incom‐

plete.

294 | Chapter 14: Continuity with Dynamic Infrastructure

Your data should be backed up somewhere separate from where it’s used, in a way

that’s easily and reliably accessible.

Having configuration definitions and scripts that can rebuild your entire infrastruc‐

ture and services from scratch is essential. However, think about where those are

stored, and what would happen if that disappeared. What if you lose your VCS? If

you use a VCS provided by a vendor, what happens if they go out of business or are

hacked? Your VCS should be regularly backed up to a completely different location,

so you can extract it and bring up a new VCS in an emergency.

Practice: Prefer Rebuilding Things over Cold Standby

Rather than keeping extra infrastructure configured and on cold standby for active/

passive recovery strategies, being able to quickly rebuild failed elements may be more

effective and even more reliable. This relies on the ability to rebuild quickly, and

assumes that the time to detect a failure and complete the rebuild is acceptable for the

service involved.

A common implementation of this for servers is using automatic scaling functional‐

ity, as described earlier in this chapter. With an auto-scaling pool of servers, when

one server fails, the platform should detect the missing server and automatically build

a replacement.

This can be leveraged to provide automated DR for singleton servers that can’t easily

be clustered. Example 14-2 shows an excerpt from an AWS CloudFormation defini‐

tion for a GoCD server. This sets an autoscaling group with a minimum and maxi‐

mum size of 1. If the server fails health checks, a new one will be automatically

created. It also uses an Elastic Load Balancer (ELB) to ensure that traffic is always

routed to the current server instance.

Example 14-2. AWS CloudFormation snippet for a single-server autoscaling group

"GoCDServerPool" :{

"Type" : "AWS::AutoScaling::AutoScalingGroup",

"Properties" : {

"LaunchConfigurationName" : "GoCDServerLaunch",

"LoadBalancerNames" : [ "GoCDLoadBalancer" ],

"MaxSize" : "1",

"MinSize" : "1"

}

}

Disaster Recovery | 295

Use of this pattern works well when most of the provisioning process is done in the

server template,10 as it means new server instances will be created quickly.

Continuous Monitoring through the Pipeline

Monitoring11 is clearly essential to continuity strategies. Monitoring can even be con‐

figured to trigger automated recovery routines, replacing elements of the infrastruc‐

ture that are found to be faulty or failing.

As with any core function of infrastructure, it’s important to ensure that monitoring

is continuously validated. Some organizations only monitor production infrastruc‐

ture, but there are huge benefits from applying the same monitoring to all environ‐

ments in development and test.

Running monitoring against development and test environments gives the opportu‐

nity to validate the correctness of the monitoring itself. Changes to application code

or infrastructure might change the relevance of a particular monitoring check. For

example, a monitoring check that tests whether an application is up could fail

because of a change to networking routing, or a change to the part of the UI that the

monitoring system tests.

So it can be useful to incorporate tests of the monitoring system itself into change

management pipelines, perhaps automatically bringing the application down and

polling the monitoring system to see that it has correctly flagged the application’s sta‐

tus.

Using a monitoring tool with externalized configuration allows changes to the moni‐

toring itself to be automatically validated before being rolled out to production moni‐

toring systems. For example, when defining a new subnet, you might add a

monitoring check to prove that resources in the subnet are reachable. The definitions

for both the subnet and the monitoring check should be committed to VCS, along

with a few automated tests, such as Serverspec checks.

The VCS commit triggers the change pipeline. At least one of the automated stages of

the pipeline will cause the subnet to be provisioned in a test environment, and the

monitoring check to be added to the monitoring server instance for that environ‐

ment. One of the Serverspec tests will validate that the monitoring check appears and

lists the subnet as accessible. Another test alters the subnet configuration so that it no

longer works correctly, and then validates that the monitoring check for the subnet

detects the problem.

10 See “Provisioning in the Template” on page 119 in Chapter 6.

11 Monitoring tooling is discussed in “Alerting: Tell Me When Something Is Wrong” on page 87 in Chapter 5.

296 | Chapter 14: Continuity with Dynamic Infrastructure

Fully monitoring development and test systems also helps development and infra‐

structure teams. When automated testing fails in an environment, monitoring can be

valuable in debugging the issue. This is especially helpful finding issues in the inter‐

play between applications and infrastructure, such as problems with resource usage

(e.g., memory, disk, and CPU).

Monitoring and testing

Monitoring and automated testing have a lot in common. Both make assertions

about the state of an infrastructure and its services, and both alert the team that there

is a problem when an assertion fails. Combining or at least integrating these concerns

can be very effective. Consider reusing automated tests to validate whether systems

are working correctly in production. Some caveats, however:

• Many automated tests have side effects, and/or need special setup, which may be

destructive in production.

• Many tests aren’t relevant for production monitoring. Monitoring checks for

problems that can happen because of changes in operational state. Testing vali‐

dates whether a change to code is harmful. Once the code is changed and applied

to production, rerunning a functional test may be pointless.

• Reusing code between tests and monitoring is only useful if it makes life easier.

In many cases, trying to bend and twist a testing tool so it can be used for pro‐

duction monitoring may be more effort than simply using two different tools.

Monitoring and antifragility

As mentioned in Chapter 1, the key to an antifragile infrastructure is making sure

that the default response to incidents is improvement. When something goes wrong,

the priority is not simply to fix it, but to improve the ability of the system to cope

with similar incidents in the future.

A team typically handles an incident by first making a quick fix, so that service can

resume. They then work out the changes needed to fix the underlying cause, to pre‐

vent the issue from happening again. Tweaking monitoring to alert when the issue

happens again is often an afterthought, something nice to have but easily neglected.

A team striving for antifragility will make monitoring, and even automated testing,

the second step, after the quick fix and before implementing the long term fix.

This may be counterintuitive. Some system administrators have told me it’s a waste

of time to implement automated checks for an issue that has already been fixed,

because by definition it won’t happen again. But in reality, fixes don’t always work,

may not resolve related issues, and can even be reversed by well-meaning team mem‐

bers who weren’t involved in the previous incident.

Disaster Recovery | 297

Monitoring-driven development

So the workflow for fixing production issues could be:

1. Restore service to end users.

2. Create a monitoring check that detects the issue, and an automated test to repli‐

cate the issue and prove the check works.

3. Create the fix for the issue.

4. Commit all of these—fix, test, and monitoring check—to VCS and see that they

progress through the pipeline to production.

This is test-driven development (TDD) for infrastructure.

Security

Security must be woven into the design and implementation of any IT system. Infra‐

structure as code, by building and proving systems repeatably, reliably, and transpar‐

ently, can be used as a platform to ensure systems are well protected. However, the

automation used to provision and manage systems, and the programmable infra‐

structure platforms it it built on, can itself create new openings for attackers to

exploit.

Automatically Papering over Compromises

Some of the patterns and practices discussed in Chapter 8 might seem useful for

automatically countering security breaches, but they aren’t reliable defenses.

Continuous synchronization12 might reverse changes made by attackers—assuming

they don’t make changes in areas not managed by the configuration tool. 13 Frequently

destroying and rebuilding servers14 is more likely to reverse unauthorized changes.

But if someone is able to gain access to a server once, they can do it again after the

server is rebuilt.

So while these practices might inconvenience an attacker, they can’t be relied on to

stop them. Worse, they might actually help the attacker to cover their tracks, by

removing the evidence. Automated configuration doesn’t replace the need for strong

defenses and intrusion detection.

12 Described in “Patterns and Practices for Continuous Deployment” on page 138.

13 Recall “The Unconfigured Country” on page 141.

14 Refer back to “Pattern: Phoenix Servers” on page 137.

298 | Chapter 14: Continuity with Dynamic Infrastructure

Reliable Updates as a Defense

Modern software systems of any size or complexity inevitably contain security vul‐

nerabilities. The Common Vulnerabilities and Exposures system (CVE) is a catalog of

known vulnerabilities, which is used by vulnerability databases and security tools.

Resources like this ought to help IT operations teams keep their systems more secure.

However, even well-publicized vulnerabilities such as the Heartbleed bug remain

unpatched on production systems for years after being discovered and published.15

This is a natural result when systems are difficult to update, and suffering from con‐

figuration drift.

So one of the biggest payoffs of an effective infrastructure-as-code regime is the abil‐

ity to roll out patches easily, keeping systems consistently configured with the latest

updates.

Provenance of Packages

Another common risk is installing outside software into a system that has had vul‐

nerabilities deliberately added by attackers. The modern IT landscape is built on a

vibrant ecosystem of shared code, both open source and commercial. But people with

bad intentions can and do hide backdoors and Trojans in this code.

Whom to Trust?

While you may not blindly trust code downloaded from a random user on GitHub,

you might be tempted to assume that you can trust code—and hardware—from a

“reputable” vendor. Sadly, this is not the case. As I write this, the blogs and IT news

outlets are in a tizzy over the discovery of a long-standing “malicious back door” in

hardware firewall products made by a major corporation. 16

This is only the latest such incident, at the end of 2015. There have been similar reve‐

lations for other vendors, and more will certainly come. The truth is that, code

reviews, testing, and security analysis that goes on behind closed doors can’t be fully

trusted. Anyone who has seen inside the sausage factory17 knows that shortcuts, expe‐

diency, commercial pressures, and laziness are common.

15 https://www.venafi.com/assets/pdf/wp/Hearts-Continue-to-Bleed-Research-Report.pdf

16 https://www.schneier.com/blog/archives/2015/12/back_door_in_ju.html

17 John Godfrey Saxe said, “Laws, like sausages, cease to inspire respect in proportion as we know how they are

made.” Software and IT systems should be added to this list, especially those built and run in large commer‐

cial organizations.

Security | 299

Teams should be sure they understand the provenance of all of the software they use

(i.e., where it comes from) and have a realistic view of how well they can trust it.

“Where things come from” on page 106 in Chapter 6 lists typical sources of software

on a server, but there are many other sources of software used in an infrastructure.

Examples include configuration definitions (e.g., cookbooks, playbooks, manifests,

etc.) from community sources, Container images (e.g., Docker images), and snippets

of scripts found on websites.

The measures a team takes to manage externally sourced software will vary based on

needs. Some teams only use software from sources that have been rigorously vetted,

or even insist that all source code must be audited. But this limits the ability of the

team to take advantage of third-party products.

Methods of establishing trust in third-party software

Vendor code review

Commercial vendors should be motivated and qualified to ensure their code is

thoroughly inspected for vulnerabilities. But again, experience has shown that

this is not always true.

Public code review

Open source code is visible for many experienced people to review. “Given

enough eyeballs, all bugs are shallow,” according to Linus’s Law stated by Eric

Raymond. However, experience has proven that there is no guarantee that quali‐

fied people will actually take the time to review any given bit of open source

code. The Heartbleed bug existed for two years in open source software that was

used at the core of many security tools.

Direct code review

Arguably the most effective method of ensuring that the code you use is secure is

to review the code yourself. In practice, this is limited by your skill at security

analysis of code, as well as your available time to do it.

Contracted code review

You can contract a qualified third party to review code on your behalf, which can

help ensure the right skills. Some vendors offer to review and certify open source

packages. While this may be a reasonable compromise, you are limited by the

capacity of the vendor to review the packages you want to use in the timescales

you need them. This is part of the service offered by many Linux distribution

vendors, but it’s common for teams to install newer packages, not yet included in

a distribution, rather than wait for new releases.

Penetration testing

Having a qualified third party review not only your code, but also your imple‐

mentation, configuration, and how you use software, can be a valuable check.

300 | Chapter 14: Continuity with Dynamic Infrastructure

Legal and/or contractual protection

One measure an organization can take is to ensure that there is a vendor who

takes legal responsibility for all software used. This may require direct contrac‐

tual relationships. This can mitigate at least some of the commercial risk of a vul‐

nerability by passing it on to the vendor. But it does not mitigate the reputational

risk, as users and customers do expect you to take ultimate responsibility for

what you provide to them.

This is the basic trade-off. Teams balance their flexibility to select useful third-party

software against their level of confidence in the security of that software. However,

it’s possible to mitigate this trade-off by ensuring the ability to quickly correct.

In other words, as with other aspects of continuity, a team can decide to optimize for

recovery rather than assume perfect prevention. Again, this doesn’t mean neglecting

prevention, but it allows more leeway in selecting software if the team knows it can

quickly roll out patches and fixes as vulnerabilities become known.

Automated Hardening

An obvious way to leverage infrastructure as code to improve security is to automate

server and network hardening. “Hardening” refers to configuring a system to make it

more secure than it would be out of the box. Typical activities include:

• Configuring security policies (e.g., firewall rules, SSH key use, password policies,

sudoers files, etc.).

• Removing all but the most essential user accounts, services, software packages,

and so on.

• Auditing user accounts, system settings, and checking installed software against

known vulnerabilities.

There are many references available with specific suggestions for hardening servers. 18

Teams should ensure their configuration definitions for servers, networks, and other

infrastructure elements harden their systems sufficiently. There are frameworks and

scripts that can be applied, such as those found at https://github.com/dev-sec. It is

essential that the members of the team review and understand the changes made by

externally created hardening scripts before applying them to their own infrastructure.

External resources can be a useful starting point, but the people who own a given sys‐

tem have a deeper understanding of the characteristics and needs of their system.

18 A few security hardening references include “Proactively Hardening Systems Against Intrusion: Configura‐

tion Hardening” on the Tripwire website, “25 Hardening Security Tips for Linux Servers” , and “20 Linux

Server Hardening Security Tips” .

Security | 301

Hardening rules should be applied to server templates, to ensure the baseline for new

servers has been locked down appropriately. But hardening should also be applied at

the end of the provisioning process, to ensure that configuration changes and pack‐

ages installed during the process have not inappropriately weakened the server’s

security. Continuous synchronization can ensure that hardening rules are kept in

place during the life of the server.

Automating Security Validation in the Pipeline

The use of a change management pipeline to test changes before applying them to

important systems creates the opportunity to validate security. Automated tests can

check that security policies have been properly applied, and that they work well in

practice.

There are a number of security scanning and penetration testing tools that can be

executed as part of the change pipeline.19 As with other types of tools, it’s useful to

select tools that are designed to run unattended, and which can be configured and

scripted through externalized files managed in VCS.

As with availability monitoring, there is—or should be—overlap between tools run to

validate changes in the pipeline and those run in production to detect intrusions.

Automated tests can prove that configuration of intrusion detection tools are cor‐

rectly configured.

The Change Pipeline as a Vulnerability

An automated change management pipeline is a powerful tool to manage the valida‐

tion and authorization of changes. But it also creates an attractive vector for attack.

An attacker who compromises any of the components of a change pipeline—includ‐

ing the VCS, the CI/CD orchestration tool, or artifact repositories—can potentially

exploit it to make unauthorized changes.

Considering how central these tools are to an automated infrastructure, they should

be among the most rigorously controlled systems in the estate. Strategies for securing

systems should include the pipeline used to configure those systems into their scope.

For example, if access to a system is segregated to a subgroup within the organiza‐

tion, only that subgroup should have access to the relevant files and configuration of

the change pipeline.

As of early 2016, many of the tools commonly used to implement pipelines are not

well designed to secure and segregate access between groups that share it. VCS and

19 Some example tools were listed in “Testing Operational Quality” on page 211 in Chapter 11.

302 | Chapter 14: Continuity with Dynamic Infrastructure

artifact repositories tend to have reasonable controls to lock down access across

projects and folders.

But the current generation of CI and CD orchestration tools tend to be trivial to

exploit to gain access across projects hosted on the same instance. On one popular CI

tool, it’s possible for you to configure a job to use encrypted secrets, such as database

access credentials. However, commonly used plug-ins allow other users to run a job

that reads and decrypts your credentials.

Organizations that require secure segregation across teams are potentially better off

running multiple instances of their CI/CD tool. Each team is given a dedicated

instance, so there is no need to expect the tool to protect secrets internally.

Managing Security Risks with Cloud Accounts

The automated infrastructure platform is another key vector for attackers. If some‐

one can gain access to the credentials used to manage infrastructure resources they

can do considerable damage. 20 Fortunately, there are a number of practices that can

mitigate risks when using cloud services. These are particularly important when

using public clouds, but should not be neglected even inside your own data center.

Practice: Use segregated cloud accounts

Rather than running the entire infrastructure in a single account, accessible with a

single set of credentials, the infrastructure should be segregated into accounts with

their own credentials. The goal is to limit the damage that can be done by an attacker

who gains access to a set of credentials. Exercises such as threat modeling21 are useful

to design the segregation of the system to defend against different types of attacks

and compromises.

Logging and alerting out

Detecting intrusions and other problems is an important element of a defense strat‐

egy. Attackers will attempt to cover their tracks by erasing or overwriting logs, and by

disabling logging and alerting. Defensive designs should involve ensuring that the

evidence of a system being compromised is handled by a separate system, with com‐

pletely separate access credentials.

20 The end of Code Spaces, a source code hosting company, is a cautionary tale for cloud hosting. Attackers

gained access to the company’s AWS credentials, demanded a ransom, and then destroyed the company’s

data. Cloud Spaces used AWS in common ways that made it difficult for them to defend themselves. Specifi‐

cally, they had everything hosted under a single account, including their backups. For more information, see

“Murder in the Amazon Cloud” and “Catastrophe in the Cloud: What the AWS Hacks Mean for Cloud Pro‐

viders”.

21 Also see Adam Shostack’s Threat Modeling: Designing for Security.

Security | 303

For example, logs should be streamed to a separate log aggregation service, which is

configured to alert on suspicious activity. A separate system should handle monitor‐

ing, again alerting when there is evidence that the client system may have been com‐

promised.

This then requires an attacker to compromise more than one system in order to cover

their tracks. While this is possible, it should be a more difficult barrier. However, for

this to be effective, it should not be possible to exploit the monitoring or log aggrega‐

tion service to gain access to the protected system. A monitoring server that has unat‐

tended SSH access to systems it monitors (e.g., in order to run scripts to check status)

gives an attacker a single point for attacking the system while also covering their

tracks.

Use strong authentication and manage credentials well

Cloud providers and platform vendors are increasingly offering more options for

managing authentication. Teams should take full advantage of these. More rigorous

authentication mechanisms may be intimidating or just seem like too much work,

but the habits of using them become easier with time.

Examples of good practices for authentication and credentials include:

• Use multifactor authentication (MFA).

• Set up delegated roles and authentication for each person, application, service,

and so on.

• Don’t share credentials; each team member should have their own credentials.

• Use truly strong, unique passwords, 22 using a good password manager such as

1Password or Lastpass.

• Don’t store credentials in a VCS, artifact repository, file server, etc., even if they

are obfuscated.

The use of credentials by automated processes and applications is particularly tricky.

A password that is available to an unattended application or script is also available to

an attacker who gains sufficient access to the system that it runs on.

Credentials can be stored in an encrypted secrets repository such as HashiCorp

Vault, Ansible-Vault, Chef encrypted databags, or similar solutions. However, an

unattended application or script will still need to be authorized to retrieve those

secrets from the repository, which can again be exploited by an attacker.

22 See xkcd’s “Password Strength” comic for an illustration of why mixing case, symbols, and numbers into a

password doesn’t make it particularly strong.

304 | Chapter 14: Continuity with Dynamic Infrastructure

There are a few techniques to reduce the vulnerability created by authorization of

unattended processes:

• Control access to the system where it runs.

• Ensure authorization is only usable from controlled locations/instances.

• Limit the lifespan of credentials.

• Limit the number of uses for a given credential.

• Log access to/use of credentials, generating alerts for unusual usage.

• Only give credentials read-only access unless absolutely required.

Be able to rebuild

The ability to effortlessly rebuild any part of an infrastructure is a powerful defense. If

an attacker gains the credentials for an infrastructure hosting account, the ideal is to

be able to completely rebuild everything in a new account, load data from backups,

and then reroute traffic to it so that the original account becomes expendable.

This is the essence of Disaster Recovery, and as discussed earlier in the chapter, this

will ideally make use of mechanisms that are exercised as a routine part of operations.

But DR should be designed to be effective in the face of bad actors who gain unau‐

thorized access to parts of the system. This involves ensuring that all of the materials

needed to rebuild any part of the system, and to put it into service, are segregated.

Having the source control, definition files, data backups, and so on all accessible with

a single set of credentials is unsafe. Ideally, each of these should be managed in sepa‐

rate services and accounts. Access should be minimized between these accounts.

For example, a system that provisions infrastructure probably doesn’t need write

access to the VCS where configuration definitions are managed. If it does have write

access, an attacker who compromises the provisioning system can destroy or com‐

promise the definition files, preventing the team from easily recovering and rebuild‐

ing their infrastructure.

But if the provisioning system only has read access to the VCS, then the team can

shut it down, and use the definitions to build a new one and resume operations.

Conclusion

The practices and techniques described in this chapter focus on keeping systems sta‐

ble in the face of failures and attacks. This is the essence of “robustness.” But a more

ambitious goal is antifragility. Rather than simply recovering from problems, you

should aim to continuously strengthen and improve the reliability and effectiveness

of your systems.

Conclusion | 305

The next and final chapter of this book gives guidance for adopting infrastructure as

code in the organization. This provides the foundation for moving from keeping sys‐

tems running, to continuously improving the effectiveness of service.

306 | Chapter 14: Continuity with Dynamic Infrastructure

CHAPTER 15

Organizing for Infrastructure as Code

This book is primarily focused on the technical implementation of infrastructure as

code with dynamic infrastructure. This final chapter takes a look at implementing it

from an organizational point of view.

The premise of infrastructure as code is that cloud and dynamic infrastructure cre‐

ates opportunities to use completely new practices and techniques when working

with infrastructure. Using the old ways of working, such as configuring servers by

hand, wastes the benefits of the new technology.

In the same way, using cloud practices with old operational models for IT service

wastes the benefits of the new technology and working practices.

Teams can deliver and run software-based services far more effectively using cloud-

age technologies and practices. But they can only do this if the organization as a

whole understands how to make it work and ensures that its structure and processes

are designed for it.

Infrastructure as code, in combination with cloud services, can help organizations to

easily respond to changing needs with reliable, high-quality services. The organiza‐

tional principles that enable this include:

• A continuous approach to the design, implementation, and improvement of

services

• Empowering teams to continuously deliver and improve their services

• Ensuring high levels of quality and compliance while delivering rapidly and

continuously

307

There is no guaranteed formula for success. But the recommendations in this chapter

are based on patterns seen in organizations that make particularly effective use of

emerging infrastructure technologies and practices. Common themes are having a

culture, structure, policies, and processes that encourage flexibility, decentralized

decision making, and continuous improvement.

Evolutionary Architecture

Every IT organization is unhappy with its current architecture. It has grown organi‐

cally into a spaghetti-shaped mess, burdened with technical debt. Of course, there is a

plan to transform to a new world, a beautiful, cleanly designed platform. It will be

based on the most up-to-date architectural patterns and principles and will use the

latest technologies.

Unfortunately, the road to the new world is filled with obstacles. There isn’t enough

time, commercial pressures divert focus, and services running on the old platforms

still need support. It doesn’t help that the shiny new technologies turn out to have

unexpected limitations. Or that it’s only after getting the new system built that you

truly understand how you should have built it. At the end of the transformation, you

have a new spaghetti-shaped mess, burdened with technical debt. The new mess is

inevitably intertwined with leftover pieces of the previous generation mess, simply

adding a new layer of legacy.

Organizations usually end up in a messy end-state because they take a static view of

architecture, rather than an evolutionary view. 1

The traditional approach to software and system design emphasizes the need for a

design to be complete and correct. Once implementation has started, any changes

indicate a flaw in the design. Evolutionary and iterative approaches, on the other

hand, start by understanding the direction, and then designing and implementing the

smallest thing that can be used to progress and learn. Changes are welcomed, because

they show that the team has learned something.

The foundation of evolutionary design and implementation is the ability to make

changes continuously, easily, safely, and cheaply. Teams who embrace this approach

know that they won’t achieve a perfect “final” design. Anyway, the right design is

continually changing. So they become comfortable, and proficient, with continuous

change.

1 See “Evolutionary Architecture and Emergent Design: Investigating Architecture and Design” for more infor‐

mation on evolutionary architecture.

308 | Chapter 15: Organizing for Infrastructure as Code

The Road to the Cloud

An online commerce company decided that migrating from a data center to a public

cloud provider could help them manage variations in demand. Their volumes had

fairly large variations on daily, weekly, and annual patterns, so could potentially save

money by scaling down during slower periods.

We started by identifying one part of the service that could benefit from this capabil‐

ity, and that seemed the most amenable to quickly implementing and testing on the

new cloud platform. We spent a few weeks experimenting with running it on the new

cloud platform and choosing some tools. Then we put the new part of the service live,

integrating it with the rest of the platform still running in the data center.

This helped us to learn how to work with the new cloud provider to meet the needs of

our service. For example, we settled on transaction rates, as reported by our applica‐

tion, as the best metric to trigger scaling up and down. But we also found that the lag

to create new instances when there was a sudden surge in traffic, such as those caused

by television commercials, was too slow. We found that running a capacity buffer—

two additional instances—gave the automated scaling enough time to respond.

We also found an initial set of automation tools and approaches that we were happy

with as a team. We completely ripped out and replaced our original infrastructure

definition tool. We also scrapped the server configuration tool we had started out

with in favor of an immutable server approach, to speed up the automated scaling

process.

We were under no illusions that these technologies and practices were the “final”

ones. As the team migrated more services onto the cloud, we found that some needed

different approaches. In some cases, such as when a new service needed better moni‐

toring than the simple tool we had installed, we moved the services already running

on the cloud over to it as well. In other cases, as when a new service needed a custom‐

ized database, we kept the existing services on the cloud provider’s DBaaS (Database

as a Service).

The organization has no “end state” platform. They still have some services running

in their old data center, although 80% of their estate is now in the public cloud. They

might end up migrating the remaining services to the cloud in the future, but only

when they have a proven need to do so.

Learning under Fire

A spike is a timeboxed experiment, intended to answer some particular question,

such as which metric to use to trigger automated scaling. It might be appropriate to

carry out a spike in a lab environment. But spikes should be used in a very limited

way. The best learning environment is one that involves real user loads.

Evolutionary Architecture | 309

Use zero-downtime replacement patterns (such as those discussed in “Zero-

Downtime Changes” on page 282) to carry out tests with real production traffic,

while keeping the control to shut down experiments that go wrong. Have monitoring

and measurement in place so you have visibility of the impact of what you’re doing.

This should include commercial metrics such as transactions, so you are aware

quickly if your experiment is causing serious harm.

In some cases, A/B testing can be useful for infrastructure testing. This involves

putting two different implementations live, and measuring the results to see which is

more effective.

Start with a Trailblazer Pipeline

Many teams approach automation with a big bang, “boil the ocean” project. How‐

ever, these have a number of risks that can lead to failure. One risk is that the sheer

size may require too much work before anyone sees anything useful come out of the

project. Another risk is that by the time something does emerge, it has already

become so large and complex that it’s difficult to reshape and tweak it as the team

gains experience from using it in anger.

A third risk comes from implementing changes “breadth-first.” For example, the

work might be done in stages: first implement configuration definitions for every‐

thing, then move on to implement automated tests, then move on to build a change

pipeline. The issue with this is that this limits the opportunity to incorporate learning

that happens between these stages.

The trailblazer pipeline2 is a more evolutionary approach to implementing infrastruc‐

ture automation. It takes a “depth-first” approach, building a simple, end-to-end

change management pipeline. The team starts building a trailblazer pipeline by

choosing a single, simple change. For example, one team started by writing a Puppet

manifest to set the motd3 on their Linux servers.

The team’s trailblazer pipeline had the basic, end-to-end stages. They set up a Git

repository using Atlassian Stash, which they were already using for scripts and other

things, and a Jenkins CI server. The initial stages of their pipeline were:

1. CI stage, triggered on commit to the Stash repository, for some basic validation

of the manifest

2. Test stage, which applied the manifest to a test server

2 Another term for a trailblazer pipeline is a tracer bullet pipeline.

3 motd is the message of the day, seen when users log into a shell.

310 | Chapter 15: Organizing for Infrastructure as Code

3. Prod stage, which applied the manifest to several severs used by the infrastruc‐

ture team, including DNS servers and file servers

They chose a few tools for testing, including puppet-lint for the CI stage, and Server‐

spec to run against the test server to prove that the motd file is in place.

This was a very crude start, and deliberately so. The change being managed was triv‐

ial. The testing was not thorough. The team hadn’t put in all of the tools they would

eventually need. The were using some tools that they didn’t expect to carry on with.

None of this mattered, because they could evolve from this base with confidence.

The team moved on to more complex changes—for example, managing the system

account that the team members used to log into the Linux servers. They wrote a Pup‐

pet manifest to create an account and add their public SSH keys to the authorized

keys file. Then they expanded the testing to prove that SSH access to the account still

worked. If someone committed a malformed change when adding or removing an

SSH key, then it would be caught in the test stage, before being applied to more

important systems.

Measuring Effectiveness

It’s important for teams to understand and agree on what outcomes they’re trying to

achieve. They can then continuously assess how well they are doing so that they can

decide what improvements to make next.

Agree on Desired Outcomes First

The goals for IT services, including infrastructure, should be driven by the users and

other stakeholders. All too often, IT teams start initiatives with little if any input from

these people.

Bringing stakeholders, users, and IT staff together to discuss current problems and

needs often raises surprising issues. Gaining agreement, across the board, on what

these are is an essential first step before moving on to considering initiatives such as

cloud or automation.

Workshops such as futurespectives, elevator pitch, and product in a box can help

groups to raise and discuss issues. These kinds of sessions should build a common

understanding of the problems that the organization needs to address, potential

approaches to them, and ways of measuring progress and making improvements over

time.

Measuring Effectiveness | 311

User Experience Design for Infrastructure

Projects to build customer-facing software typically kick off with a great deal of activ‐

ity to understand what users need, and how to meet those needs. Infrastructure and

other IT projects would be far more successful if they took the same approach.

It might seem odd to create user personas for a private PaaS initiative. But without

taking the time to consider who the potential users are, and to talk to them about

what they need, you are simply guessing. Spending piles of your organizations’

money on initiatives based on guessing what might be useful is simply not responsi‐

ble.

Two books to consider include:

• Agile Experience Design by Lindsay Ratcliffe and Marc McNeill (New Riders)

• User Story Mapping by Jeff Patton (O’Reilly)

Choose Metrics that Help the Team

Teams should choose measurements that are useful to them, based on their goals and

situation. There are many potential pitfalls with metrics. There is a natural tempta‐

tion to over-focus on specific metrics, forgetting that they are only a proxy for perfor‐

mance. Metrics become especially damaging when they are used for incentives. 4

Metrics are best used by the team to help itself, and should be continually reviewed to

decide whether they are still providing value.

Some common metrics used by infrastructure teams include:

Cycle time

The time taken from a need being identified to fulfilling it. This is a measure of

the efficiency and speed of change management. Cycle time is discussed in more

detail later in this chapter.

Mean time to recover (MTTR)

The time taken from an availability problem (which includes critically degraded

performance or functionality) being identified to a resolution, even where it’s a

workaround. This is a measure of the efficiency and speed of problem resolution.

4 See “Why Incentive Plans Cannot Work” in the Harvard Business Review.

312 | Chapter 15: Organizing for Infrastructure as Code

Mean time between failures (MTBF)

The time between critical availability issues. This is a measure of the stability of

the system, and the quality of the change management process. Although it’s a

valuable metric, over-optimizing for MTBF is a common cause of poor perfor‐

mance on other metrics.

Availability

The percentage of time that the system is available, usually excluding time the

system is offline for planned maintenance. This is another measurement of sys‐

tem stability. It is often used as an SLA in service contracts.

True availability

The percentage of time that the system is available, not excluding planned main‐

tenance. 5

Track and Improve Cycle Time

Cycle time measures the time taken to implement changes. The time is measured

starting from when a need has been identified, and ending when the change is in use

and delivering value. The intention is to understand how quickly the organization

responds to changing needs.

Value stream mapping is an exercise used to to analyze the cycle time for changes,

breaking down activities to understand how much of the cycle time is spent on differ‐

ent activities, which may be optimized, and waste, which may be removed. 6

For example, it may take a member of the infrastructure team 5 to 10 minutes to pro‐

vision a new server using a cloud or virtualization platform. But when the full cycle is

analyzed, starting from when a user requests a new server and ending when she is

able to use it, the total time might vary from a minimum of 6 days up to 18 days. This

includes activities such as filling in the request form with a business case; considering

the request in a change advisory board (CAB) meeting; and testing the server after it

has been provisioned but before it is turned over.

Figure 15-1 shows an example of a value stream map for an infrastructure change.

The map shows the time that a task spends waiting, such as waiting 1–5 days for the

next CAB meeting.

5 True availability was discussed in Chapter 14 (“True Availability” on page 276).

6 A good reference for carrying out value stream mapping exercises is Value Stream Mapping: How to Visualize

Work and Align Leadership for Organizational Transformation by Karen Martin (McGraw-Hill).

Measuring Effectiveness | 313

Figure 15-1. Value stream map for provisioning a server

This example value stream is not very efficient for normal changes. But it’s a simpler

process than what happens at many larger organizations. In real-world scenarios, a

new server might need multiple separate requests for different teams to carry out

tasks such as adding user accounts, installing middleware, and network configura‐

tion. This is why many large organizations spend large amounts of money to buy and

install private cloud and automation software, and still find that it takes weeks or

months to provision a single server.

Some teams make a point of regularly reviewing cycles times and discussing ways to

improve them. Other teams stop to do this kind of analysis when the cycle time

becomes a problem, maybe as an outcome of a post-mortem or retrospective (both

explained later in this chapter).

It’s important not to include everything in the cycle time, even nontechnical activities

and those not under the control of the team that owns the process. For example, you

need to see whether delays are caused by the difficulty of getting time from busy peo‐

ple who need to review and approve changes, or because of a lack of testers. This is

critical information and it needs to be made visible, even if the organization decides

it’s not something that can reasonably be cut or reduced.

If a change takes between 8 and 36 hours to make it to production, and the automa‐

ted activities only account for 35–45 minutes of this, there is no value in spending

time and money to speed up the automation.

Another key point for analyzing a value stream is that it measures the time for a sin‐

gle change. The cycle time is not the time to deliver a project, but rather the time it

takes for a single change, which may be delivered as part of a project. It’s not uncom‐

mon to see that less than 5% of the cycle time for a particular change is spent actually

working on that change. There may only be a few days of work involved in specify‐

ing, developing, and testing a specific change. But weeks and months are spent wait‐

ing while other requirements in the same project is being done.

This observation—that the amount of time a change spends waiting while work is

done on other changes in a project—leads to a preference for a process that emphasi‐

314 | Chapter 15: Organizing for Infrastructure as Code

zes flow over batching. Once an activity is completed on a piece of work, such as ana‐

lyzing a requirement, then it will ideally be immediately passed along to the next

phase of work. This is a major change in mindset, which is the basis for lean thinking.

Lean

Cycle time is a core concept of lean theory. Lean is a set of principles and ideas for

continuously improving work processes. It emerged from manufacturing processes,

particularly Toyota’s “Toyota Production System” (TPS), and has been used widely

for process improvement. Lean focusing on ways of getting rid of wasteful activities

by making work visible, by encouraging people who do the work to take ownership of

how it’s done, and by eliminating wasteful activities.

Tom and Mary Poppendieck have written several excellent books on Lean software

development, such as Implementing Lean Software Development: From Concept to

Cash (Addison-Wesley).

The term “lean” has become somewhat overloaded. Eric Ries has adapted the term for

product development, describing the idea of building the most minimal implementa‐

tion of a product in order to measure customer interest in his book The Lean Startup

(Crown Business). My (current and former) colleagues Joanne Molesky, Jez Humble,

and Barry O’Reilly, have written about how larger organizations can adopt lean prod‐

uct development approaches in their book Lean Enterprise (O’Reilly).

Quite often, cycle times that run to hours or days are caused by coordinating and

orchestrating changes between different system elements in larger teams. The most

likely avenue to radically cutting these times involves restructuring system architec‐

ture, team structures, and processes in order to decouple changes to parts of the sys‐

tem.

Use Kanban to Make Work Visible

A kanban board is a powerful tool to make the value stream visible. This is a variation

of an agile story wall, set up to mirror the value stream map for work. As a person

completes a work item, they pull a new item from the previous column of the board

into their own column to show that they’re working on it.

Bottlenecks become quickly visible, as items pile up in a particular column. In the

example kanban board shown in Figure 15-2, work is piling up in the testing column.

There could be several reasons for this. Testers may be starting too many tasks before

having finished others, in which case the team should drill into the reasons why this

is happening. Are testing activities becoming blocked for some reason, such as lack of

testing environments? Is it too common for tasks to come into testing with issues that

Measuring Effectiveness | 315

need rework? Or are tasks piling up after being tested, waiting for a deployment to

live?

Figure 15-2. A kanban board

Kanban in Operations

There are a number of good resources for understanding Kanban, and how it can be

applied to operations work:

• Kanban: Successful Evolutionary Change for Your Technology Business by David

J. Anderson (Blue Hole Press)

• “Kanban vs Scrum vs Agile” by Matthias Marschall

• “Reflections on the use of Kanban in an IT Operations team” by Ian Carroll

Retrospectives and Post-Mortems

Retrospectives and blameless post-mortems are important practices to support con‐

tinuous improvement.

A retrospective is a session that can be held regularly, or after major events like the

completion of a project. Everyone involved in the process gathers together to discuss

what is working well, and what is not working well, and then decide on changes that

could be made to processes and systems in order to get better outcomes. Doing this

regularly should result in streamlining processes, getting rid of wasteful or harmful

activities.

Post-mortems are typically conducted after an incident or some sort of major prob‐

lem. The goal is to understand the root causes of the issue, and decide on actions to

reduce the change of similar issues happening. The goal should not be to decide

316 | Chapter 15: Organizing for Infrastructure as Code

whose fault the issue was, but rather to identify changes that should be made to pro‐

cesses, systems, and ways of working to make future issues less likely, and to make

them easier to detect and fix.

More on Retrospectives and Blameless Post-Mortems

Two good references on retrospectives include Agile Retrospectives: Making Good

Teams Great by Esther Derby and Diana Larsen (Pragmatic) and The Retrospective

Handbook: A Guide for Agile Teams by Patrick Kua (Leanpub).

John Allspaw wrote a seminal article on blameless post-mortems, explaining the

importance of focusing on improving systems and processes rather than assigning

blame to individuals.

Organize to Empower Users

The most powerful way to manage large-scale infrastructure for multiple users is to

delegate control and responsibility to those users. A key principle of lean process

theory is to “move the work to the workers.” That is, the people closest to the sharp

end have the most knowledge about the problems they need to solve. So, give them

what they need to shape their tools and working process.

Unfortunately, the norm in most organizations is to structure teams and working

processes in ways that disempower teams.

Pitfalls of the Divided Function Model

Traditional service models divide people into functional teams. The work of design‐

ing, implementing, and supporting services is divided between these teams.

There are several reasons why this seems like a good idea. Teams of functional

experts can become “centers of excellence,” which are very good at their specialism.

Work can be divided into tidy, well-defined chunks, and parceled out to functional

teams who don’t need to understand the context for their work.

However, the result of this model is inevitably to fragment the knowledge and

accountability for the service. It adds significant overhead to coordinate the work

across the teams. And the team that owns the service lacks deep understanding of

how it works.

Dividing the implementation and support of services across functions tends to create

a number of problems.

Organize to Empower Users | 317

Pitfall: Design fragmentation

Designs and specifications must be centrally created and apportioned to the various

teams to implement. Often, the people in these teams have little visibility, and not

enough time to understand the big picture. More often than not, integration between

the functional parts doesn’t work as well as planned, needing testing, arbitration to

resolve conflicts between the teams, and unplanned rework at the last minute.

Core Competency

In the past decade or so, many organizations have decided to outsource technical

work as “non-core” and cut down their in-house technical staff. Nearly every one of

these I’ve encountered has, over time, replaced these people with project managers,

business analysts, architects, and QAs. These people are needed to have any hope of

managing the work done by the outsourced technical group.

These groups are at constant war with their suppliers. They never seem happy with

the services they are able to offer to their own customers, the time it takes to deliver

improvements and fix issues, or the costs involved.

It’s hard to avoid the conclusion that technology is more important to these busi‐

nesses than they want to believe. Discarding technical capability in exchange for

project management capacity seems to do more harm than good.

Pitfall: Scheduling rigidity

When implementation is split across multiple teams, each of which is involved in

implementing multiple projects, then scheduling becomes critical. Project plans and

resource scheduling create rigid, inflexible schedules. There is no tolerance for things

going wrong, much less for improving on the original designs as the team learn more.

This results in cascades of slippages.

Pitfall: Long cycle times

Cycle times can be cut dramatically by reducing the number of teams involved in car‐

rying out a piece of work. Each handover between teams adds overhead, as seen in

Figure 15-3. There is communication overhead, often in the form of documentation

and meetings. There is overhead of the receiving team asking questions and needing

changes before the handover can be complete. And there is overhead of idle time,

waiting for busy teams to become available to pick up the work.

318 | Chapter 15: Organizing for Infrastructure as Code

Figure 15-3. Value stream with handovers between teams

Adopt a Self-Service Model

Infrastructure users can be empowered through a self-service model. Rather than

asking a team that provides infrastructure to define, provision, and configure infra‐

structure for them, the user team can do this on their own. The provider team can

make sure that the user teams have the tools they need to do this effectively. They can

also support user teams, by offering advice, assistance, and implementation reviews.

For example, an application team may be able to write their Terraform file to define

the environment for their application, and then configure a pipeline to test the file

and use it to provision and manage test and production environments. The applica‐

tion team’s environment definition might integrate with shared infrastructure

resources, such as monitoring services and network structures.

A networking team might help the application team by explaining how to configure

this integration. A security team could make sure that the team knows which security

tests run in the pipeline. They might periodically review the configuration of the

infrastructure, pipeline, and tests, along with the test results, to ensure that changes

are being handled responsibly.

The crucial point is that the application team has the control, and the responsibility.

They don’t wait for other teams to configure networking or perform security audits

for each change. They can experiment with different options, see what works best for

them, and seek help when they get stuck.

The result of this model is to streamline the value stream. A single set of people can

take the work through design, build, test, and deployment. Because the same people

are involved, there is little to no handover. Work doesn’t wait for people to become

available between steps.

The team that owns the application knows the most about it, so is able to make the

best decisions about changes to it. If they make a mistake, they will be the first to dis‐

cover it, and are able to quickly make the needed adjustments.

Organize to Empower Users | 319

Take Full Responsibility: You Build It, You Run It

Traditional IT models divide implementation and support into separate teams, some‐

times referred to as “build” and “run,” or “development” and “support.” Figure 15-4

depicts this division, showing separation between build and run teams for applica‐

tions, as well as build and run teams for infrastructure.

Figure 15-4. The classic development/operations divide

Responsibilities become even more divided than shown here in larger organizations.

More horizontal layers are added for operating systems, middleware, and so on. Ver‐

tical silos are added for design/architecture, release management or transition, and

even separate teams to deploy and manage different types of testing.

The result of this is to isolate the people building a from any problems they create. It

leaves the people who run the system with little ability to make meaningful improve‐

ments as they discover problems. Because the most valuable learning opportunities

come from how a system is used in production, this dev/ops divide limits continuous

improvement.

A valuable strategy to empower teams is to give them end-to-end responsibility. This

is most effectively done through the principle of “you build it, you run it” popular‐

ized by Amazon and Netflix, among others. The application team takes responsibility

for supporting their application in production, rather than just handing it over to a

separate support team.

This usually means the application team takes on-call duties for the application.

When there is an incident, the on-call application team member investigates. Because

he has ownership of the application and infrastructure configuration, he is able to

investigate and fix problems at those levels. If the problem is with the core infrastruc‐

ture or platform elements managed by another team, the application person sends

the incident to a member of those teams.

320 | Chapter 15: Organizing for Infrastructure as Code

Organizing into Cross-Functional Teams

Cross-functional teams put all of the people responsible for building and running an

aspect of a system together. This may include testers, project managers, analysts, and

a commercial or product owner, as well as different types of engineers. These teams

should be small; Amazon uses the term “two-pizza teams,” meaning the team is small

enough that two pizzas is enough to feed everyone.

The advantage of this approach is that people are dedicated to a single, focused ser‐

vice or small set of services, avoiding the need to multitask between projects. Teams

formed of a consistent set of people work far more effectively than those whose mem‐

bership changes from day to day.

In some smaller organizations, a cross-functional team may own the entire stack,

from application to servers to metal. In larger organizations, this can be more diffi‐

cult. It may be sensible to have teams own different, interdependent services, includ‐

ing infrastructure services, as seen in Figure 15-5. The key principles to ensure

efficient value streams is to retain end-to-end ownership—you build it, you run it—

and to ensure that teams are fully empowered to deliver what they need without wait‐

ing on gates and request queues. 7

Figure 15-5. An example of you build it, you run it

7 The Harvard Business Review has published an article explaining why many cross-functional teams are dysfunctional, which offers insight into how to make them work well.

Organize to Empower Users | 321

Tribes: Keeping Up Functional Expertise with Cross-Functional Teams

Organizations that go all-in on cross-functional teams risk losing functional exper‐

tise, and losing the benefits of sharing tools. Not every team can have people with

deep skills in databases, Linux, networking, etc. And different teams may select wildly

different tools and practices for dealing with common concerns.

A common approach to counter this is cross-team communities, or tribes. Spotify

popularized the concept of “tribes” in technical organizations thanks to a series of

videos and blog posts they have shared on their engineering culture. The first video in

the series is a good place to start.

Governance through Continuous Change Management

Empowering cross-functional teams to build and run services and applications can

conflict with traditional approaches to governance. The traditional, iron-age philoso‐

phy is to rely on manual approvals and inspections every time a change is made to

production systems. This encourages batching changes and making them less fre‐

quently.

However, the techniques described throughout this book enable a different, and more

powerful approach to change management. Continuous change management takes

advantage of automated processes to ensure that each change is validated early, and

corrected immediately. This doesn’t require humans to manually inspect each

change, but instead builds compliance checking and auditing into the pipeline tool‐

ing.

Well-implemented automation can make compliance and legal audits painless and

stress-free. Taking an evolutionary approach to implementing the change manage‐

ment process means that consultants can dip in, and provide feedback that is itera‐

tively built into the pipeline. Comments from auditors can be easily and rapidly

incorporated into the pipeline, sometimes before the auditor has even left the build‐

ing.

There are several elements of an effective change management process using infra‐

structure as code. These include providing building blocks to teams, providing readi‐

ness with the pipeline, sharing ownership of quality, reviewing and auditing the

pipeline, and optimizing the time to detect and correct.

Provide Solid Building Blocks

Infrastructure service teams can provide building blocks for other teams to use, and

can make sure those blocks are solid and compliant. For example, they may provide

322 | Chapter 15: Organizing for Infrastructure as Code

server templates with a hardened OS, and with security and monitoring tools pre-

installed. They can make sure that the tooling that provisions servers and configures

infrastructure does the right things, such as wiring new servers into monitoring and

security services.

It’s important that providing these capabilities doesn’t tie the hands of application

teams. Quite often, other teams will need to have variations to the pieces provided by

the infrastructure team. There should be a quick, reliable process for trying out these

variations. Ideally, application teams should be able to make and try out variations on

their own, by editing definition files and applying them to test environments. Once

they have worked out what they need, their variations can be validated, either

through automated validation or technical reviews, if not both.

Primitives, Not Frameworks

Amazon CTO Werner Vogels shared a list of lessons Amazon has

learned in building AWS. This list is excellent advice for anyone

planning or building an IT platform.

Vogels’ third point is “primitives, not frameworks.” That is, rather

than attempting to build a single, one-size-fits-all platform, build

multiple, individual components. Users can pick and choose the

elements to fit their needs, avoiding the constraints of those that

don’t fit their use case. This aligns with the Unix philosophy of “do

one thing and do it well.”8 This design philosophy has paid off very

well for AWS.

Prove Operational Readiness in the Pipeline

Even when an application team builds their infrastructure using properly prepared

building blocks, there is still a need to check that the resulting solution passes muster

before putting it into an environment where it can have an operational impact. This

is where the change management pipeline comes into play.

Operational and infrastructure teams should work with application teams to make

sure that their pipelines effectively validate operational readiness. Each change to an

application or its infrastructure should be automatically tested for compliance before

being pushed to an important environment. For example, automated penetration

testing and security scans can be run against test instances of servers created by an

application team. These can prove that no unexpected network ports are opened, no

unauthorized processes are running, and that only authorized user accounts have

been created.

8 The Unix philosophy is described in the c2 wiki post “Unix Design Philosophy” . It is also discussed in the

book The UNIX Philosophy by Mike Gancarz (Digital Press).

Governance through Continuous Change Management | 323

Sharing Ownership of Operational Quality

Operational staff should seek to remove themselves from being gatekeepers so that

they aren’t spending all of their time reviewing designs and implementations. People

such as security and compliance staff can instead spend their time educating and

coaching users. People across the organization should not see these concerns as the

sole responsibility of specialists. Instead, everyone needs to understand security, per‐

formance, compliance, stability, and so on.

Specialists should spend time with other teams, helping them to take ownership of

those areas. Teach them the principles and practices of the topic. Help set up tooling

that empowers them to check and improve operational quality. All engineers should

be able to write and run performance and penetration tests against the system.

Review and Audit Automated Processes

Automated operational and compliance testing is not bulletproof. Bugs and gaps

leave room for issues to slip through. Changes may be made to configurations and

systems without relevant changes to the tests, leaving new failure scenarios

unchecked. And in some cases, people may deliberately evade automated tests.9

Experts have a role in reviewing the processes and outcomes of operational testing.

They shouldn’t need to play this role by acting as gatekeepers for every change. But

they can periodically review the pipelines and test automation, looking for gaps and

problems. They can review logs and test reports to help assess how well the process is

working. People who do this across multiple teams can share knowledge and techni‐

ques across those teams, helping to raise the level of the process across the organiza‐

tion, or multiple organizations.

Optimize for Time to Detect and Fix Problems

As mentioned in the conclusion of Chapter 1, your team should aim to be very good

at catching problems and making fixes quickly. Too many teams believe it’s possible

to prevent mistakes from ever happening, if they can only invest enough time and

energy. But while this book strongly encourages a culture of quality and effective con‐

tinuous testing processes, it’s important to get the cost/benefit balance right. The

benefit of a fast time to market may outweigh a risk that has a fairly low cost, espe‐

cially when the risk can be detected and corrected very quickly.

9 As I was writing this book, Volkswagen made the news for deliberately programming their cars to behave

differently when being tested for compliance to emission standards. Although it’s disappointing that they got

away with it for several years, the cheating was implemented in code, so the evidence of the cheating is

explicit and undeniable now that it has been uncovered. This is a lesson for anyone who tries to code around

automated compliance tests in a software change pipeline.

324 | Chapter 15: Organizing for Infrastructure as Code

Conclusion: It’s Never Finished

Building an automated infrastructure is not a job that is ever complete. Sometimes an

organization’s leaders look to automation as a way to eliminate work, hoping that IT

capabilities can be built and will then run indefinitely with minimal ongoing invest‐

ment. But this isn’t the case, at least not with current IT systems.

Ideally, IT systems would be like a consumer automobile. You buy a new car off the

assembly line, and periodically pay to keep it fueled and maintained, occasionally

replacing parts as they wear out or fail. You don’t need to keep the engineers who

designed and assembled the car on staff.

In practice, modern IT systems are more like a Formula One race car. Each one is

custom-built, even if they use standard parts and follow common patterns. It takes

continuous work to keep it running well, patched and secure. And the needs that IT

systems must satisfy are constantly changing, as the way technology is used by con‐

sumers and businesses is constantly changing. This in turn means that an organiza‐

tion’s IT systems must constantly change.

So the organizations most successful in using IT don’t make the mistake of seeing it

as a one-off cost that can be paid and then ignored. They see it as a core capability

that helps them to adapt to continuously changing requirements.

This book set out to help people find ways to use the new generation of infrastructure

technology—cloud, virtualization, and automation—to fundamentally change the

way work is done. Adopting the principles and practices described here can help

operations teams to stop spending their time handling streams of routine requests,

and instead spend their time continuously improving systems that help other people

to take ownership of the infrastructure they need to do their own work.

What we’ve covered in this book is not enough. It’s simply not feasible to hit every

aspect of every topic, and especially not down into the details of technical implemen‐

tation with specific tools. And things are moving too quickly to capture.

So it’s important to keep abreast of what’s happening in the industry. Aside from

books, infrastructure practitioners can keep up with blogs, talks, podcasts, and vari‐

ous other channels of information.

It’s an exciting time to be part of this industry, and I hope this book has helped!

Conclusion: It’s Never Finished | 325

Index

Symbols

automated validation, 272, 302

12-factor applications, 279

automation fear, 9, 44, 260

autonomic automation, 260

A

availability

as practice of IAC, 17

A/B testing, 310

of dynamic infrastructure platforms, 24

acknowledgments, xx

as performance metric, 313

ad hoc automation, 259

true availability, 276, 313

ad hoc change management, 69, 134

AWS (Amazon Web Services) (see also Cloud‐

ad hoc scripts, 44

Formation; EC2)

agile development approach, 179, 196, 218

Auto Scaling groups (ASG), 277-278

agreement, gaining across the board, 311

command-line interface (CLI), 50

alerting, 87-89, 303

EBS (Elastic Block Store), 27, 125

amazon-chroot builder, 126

ELB (Elastic Load Balancer), 295

Aminator, 66, 119, 126

RDS (Relational Database Service), 31, 171,

Ansible, 61, 64-65, 102, 107, 112, 131, 134,

248, 290

138-139, 144, 166, 246-247, 261, 264

SDK for Go, 50

antifragility, 17, 297

antipatterns

audit and fix antipattern, 58

B

branch-based codebases, 268

backups, 291

handcrafted infrastructures, 153

backward compatibility, 252

handcrafted servers, 31, 109

Bamboo continuous integration server, 94

hot cloned servers, 111

bare-metal clouds, 32

monolithic stack, 158

batching, 16, 223

reflective tests, 213

BDD (behavior-driven development, 210

snowflake factories, 112

black box configuration pattern, 45, 83

application artifacts, 231

blameless postmortems, 202, 316

artifacts, 231

block storage, 27

Atomic host (see RedHat Atomic host)

blue-green deployment, 235, 282

authentication credentials, 210, 235, 303

Bonneville, 71

Auto Scaling groups (ASG), 277-278

Boto library, 50

automated hardening, 301

branch-based codebases, 268

automated server management, 62, 258-262

branching, in VCS, 185, 240

automated testing, 197

broken builds, 185

Index | 327

build failures, 185

Chef, 9-12, 33, 46-50, 54-55, 61, 64-69, 95, 102,

build monitors, 186

107-112, 124, 131-139, 144, 149, 168-169,

build pipelines, 223

200-208, 212-217, 228-232, 261-264

build stage, 230

Chef Provisioning, 50

ChefSpec, 201

C

CI (configuration items), 57

caching, 107

CI (continuous integration)

canary releases, 235, 285

bootstrapping immutable servers, 146

capacity, concerns with public clouds, 35

build failures, 185

CD (continuous delivery) (see also change

CI stage, 230

management pipelines)

vs. continuous testing, 183

bootstrapping immutable servers, 146

defined, 183

CD tools, 94

failed tests and, 186

configuration tools for, 139

with infrastructure as code, 187

vs. continuous deployment, 189

clean code, 190

continuous synchronization flow, 140

CLI (command-line interface) tools

defined, 187

infrastructure definition tools, 54

deployment vs. change pipelines, 188

unattended mode for, 42

integration phase issues, 187

closed-box tools, 83

masterless configuration management, 139

cloud computing (see also dynamic infrastruc‐

pulling to synchronize, 138

ture platforms)

pushing to synchronize, 138

adopting, 309

unmanaged areas, 141-143

bare-metal clouds, 32

CDC (consumer-driven contract) tests, 255

building your own cloud, 36

CFEngine, 48, 61, 64, 102

cloud-compatible licensing, 84

CFRs (cross-functional requirements), 211

community IaaS clouds, 30

change management models

essential characteristics, 22

for environments, 157

handcrafted clouds, 31

managing major infrastructure changes, 192

hybrid/mixed clouds, 32

for server change management, 69-70

managing security risks, 303-305

change management pipelines

portability, 37

avoiding bottlenecks, 234

private IaaS clouds, 30

basic designs, 229-236

public IaaS clouds, 30

benefits of, 225

types of, 31

components of, 224

understanding clouds/virtualization, 38-40

dependencies between components,

cloud era of IT, 4

246-252

CloudFormation, 50, 114, 152, 156, 203-205,

design guidelines, 226-229

238, 278, 295

effect on workflow, 257

CloudFoundry Warden, 71

human oversight of, 225

CMDB (configuration management databases)

interfaces between components, 252-256

audit and fix antipattern, 58

measuring effectiveness of, 242

vs. configuration registries, 57

scaling, 238-245

infrastructure-as-code approach to, 58

security issues, 302

Cobbler, 33

vs. software deployment pipelines, 224

code examples, xvii

using, 236-238

code quality, 190, 202, 299

change pipelines, 188

code reviews, 270, 300

changeability, 13

codebase organization patterns, 267-269

Chaos Monkey, 294

cold standby, 295

328 | Index

commands, running remotely, 66, 259

using, 74

communal dashboards, 88

vs. virtual machines, 73

community IaaS clouds, 30

Warden, 71

compartmentalization, 281

continuity

components

challenges of dynamic infrastructures, 275

dependencies between, 246

data continuity, 289-291

interfaces between, 252

defined, 275

isolating for testing, 213

disaster recovery, 292-298

refactoring, 215

security issues, 298-305

compute resources, 26

service continuity, 276-282

configuration artifacts, 231

traditional approach to, 275

configuration definition

zero-downtime changes, 282-289

configuration definition files, 48

continuous change management, 224, 322-324

developing and testing locally, 263

continuous provisioning, 224

externalized configuration, 45-48

contract tests, 254

managing, 148-149

CoreOS rkt, 71, 76, 124

managing parameters between stacks, 162

craftsmanship, 191

configuration drift, 7

cross-functional teams, 321

configuration master servers, 232

Crowbar, 33

configuration registries

Cucumber, 220

vs. CMDBs, 57

CVE (Common Vulnerabilities and Exposures)

lightweight, 56, 163

system, 299

managing parameters between stacks, 162

cycle time, 242, 312-315, 318

overview of, 55

tight coupling with, 56

D

using configuration from, 68

dark launching, 286

configuration synchronization, 69, 134

data continuity

consistency, 12, 216, 226

backing up to persistent storage, 291

Consul, 55

defined, 276

contact information, xx

delegating data persistence, 290

containers (see also Docker)

potential techniques for, 289

benefits of, 70

regenerating data, 290

Bonneville, 71

replicating data redundantly, 289

CloudFoundry Warden, 71

data protection

container orchestration tools, 92

concerns with public clouds, 34

containerized services, 70

multiple data centers, 293

CoreOS rkt, 71, 76, 124

persistent storage backups, 291

Docker, 70

zero-downtime changes, 288

implementations available, 71

declarative definitions, 52-54

libcontainer, 71

definition files

lmctfy, 71

as cornerstone practice of IAC, 13

managing Ruby applications with, 72

per-environment, 155

minimal OS distributions for running, 76

reusable, 155

Nano, 76, 124

definition tool, running, 174

Open VZ, 71

dependencies

orchestrating processes with, 92

decoupling, 71, 217

running, 75

handling between components, 246-252

security issues, 76-78

managing external for testing, 215

server change management models, 136

deployment pipelines, 93, 188, 223

Index | 329

design fragmentation, 318

reusable definition files, 155

DevOps, xiii, xxi, 8-9, 18, 179, 269

self-service, 158

disaster recovery

test and promote stack definition, 157

continuous, 293

erosion, 10

continuous monitoring and, 296-298

etcd, 55

defined, 276

Etsy, 68

DevOps, 228

evolutionary architecture, 308-311

DR plans, 292, 294

execution, unattended, 43

hallmarks of effective, 292

external dependencies, testing and, 215

rebuilding vs. cold standby, 295, 305

externalized configuration, 45-48, 83

recovery vs. prevention, 292

Extreme Programming (XP), 180, 221

disposability, 11

distributed process management

F

benefits of, 91

FAI (Fully Automatic Installation), 33

with containers, 92

failed tests, 186

orchestration tools, 92

fake servers, 214

scheduling short jobs, 92

fan-in pipelines, 239

with server roles, 92

feature toggles, 193, 253

divided function model, 317

feedback, speed of, 181, 197, 227

Docker, 61, 70-76, 78, 92, 125, 230, 300 (see

filesystems, networked, 28

also containers)

fine-grained roles, 107

documentation, 14

five nines availability, 276

Dropwizard, 238

Fog library, 50

dynamic infrastructure platforms

Foreman, 33

characteristics of, 22

fragile infrastructure, 8, 12, 175, 181

choosing, 34-38

defined, 21

examples of, 22

G

implementing, 22

general scripting languages, 67

key building blocks, 25-30

GoCD, 94

requirements for, 22-25

Google Cloud library, 50

tools for, 84

Google Compute Engine (GCE), 49, 64, 94-95,

types of, 30-33

115, 295

understanding clouds/virtualization, 38-40

governance, 235, 271, 322

dynamic server pools, 277

H

E

hardening, 301

EBS (Elastic Block Store), 27, 125

hardware, reliable vs. unreliable, 281

EC2 (Elastic Compute Cloud), 24, 73, 109-114,

HashiCorp (see Nomad; Packer; Terraform;

127, 156, 170

Vagrant)

effectiveness, measuring, 311-317

Heartbleed bug, 299

ELB (Elastic Load Balancer), 295

Heat, 41, 48, 50, 174

emergency fixes, 238, 270

higher-level tests, 209

end-to-end testing, 209

hybrid/mixed clouds, 32

environments

defined, 152

I

defining infrastructure stacks as code, 153

IaaS (Infrastructure as a Service) (see also

handcrafted infrastructures, 153

dynamic infrastructure platforms)

per-environment definition files, 155

community IaaS clouds, 30

330 | Index

defined, 31

interfaces, scriptable, 42

private IaaS clouds, 30

iron age of IT, 4

public IaaS clouds, 30

IDE (integrated development environments),

J

46

Jenkins continuous integration server, 94, 115,

idempotency

183, 189, 264-265, 310

defined, 45

JEOS (Just Enough Operating System), 124

scripts supporting, 44

join stages, 241

immutability

configuration changes and, 70

replacing vs. updating servers, 103

K

server change management and, 135,

kanban boards, 315

143-147

Kickstart, 33

templates and, 120

Kinesis, 26

information radiators, 27, 88

Kitchen Puppet, 208

infrastructure as code

antifragility and, 17

L

approach to learning, xviii

laziness, virtue of, 258

benefits of, xvi, 3, 5

lean theory, 315

challenges with, 6-10

legacy infrastructure management, 82

vs. classic infrastructure management, xiii

legal issues

defined, xiii, 5

concerns with public clouds, 34

goals of, 5

fitting governance into workflows, 271

hallmarks of effective application, 18

in production deployment stage, 235

origin of phrase, 4

retaining templates, 129

practices of, 13-17

third-party software, 301

prerequisites to learning, xvii

libcontainer, 71

principles of, 10-13

library dependency, 246

role in modern IT operations, xiii-xvi

licensing, cloud-compatible, 84

in static infrastructures, 6

"lift and shift" migration, 160, 280

tools for, 19

lmctfy, 71

infrastructure definition tools (see also Cloud‐

load balancing, 286

Formation; Heat; Terraform)

local development stage, 229

benefits of, 41

local sandboxes, 262-267

choosing, 42-48

log aggregation and analysis, 89, 303

configuration definition files, 48

LoginService example application, 203

configuration registries, 55-54

LOM (lights-out management), 33

overview of, 50-55

loose coupling, 85, 252

using, 54

low-level testing, 204

infrastructure services

considerations for, 81-85

M

distributed process management, 91-93

maintenance, 277

key services addressed, 81

managed clouds, 36

managing legacy products, 82

manual gates, 271

monitoring, 87-90

masterless configuration, 139, 231-232

service discovery, 90

mechanical sympathy, 38

sharing services between teams, 85

merge monkeys, 268

software deployment, 93-96

metrics

integration phase, 187

monitoring with, 89

Index | 331

selecting, 312

measuring effectiveness, 311-317

MFA (multifactor authentication), 304

overview of, 307

microservices

origin images

application standards, 146

customizing templates without booting, 125

benefits of, 281

hot cloned server templates, 123

deploying, 95

OS installation images, 123

infrastructure design for, 169-173

stock images, 124

Microsoft Nano, 76, 124

Unikernel server templates, 125

mid-level testing, 206

out-of-hours maintenance, 277

mock servers, 214

outcome measurement

monitoring

agreeing on goals, 311

alerting, 87-89, 303

kanban boards for, 315

vs. automated testing, 212

measuring IAC effectiveness, 311

continuous, 296-298

metric selection for, 312

goal of, 87

retrospectives and post-mortems, 316

information radiators and, 88

tracking/improving cycle times, 313

log aggregation and analysis, 89, 303

metrics for, 89

P

monitoring-driven development, 298

package management tools, 149

"monkey" roles, 268

Packer, 48, 66, 86, 119, 122-123, 126-127, 131, monolithic environments, 158

144, 203-206, 233, 238-241, 263-264

MTBF (mean time between failures), 313

pair programming, 219

MTTR (mean time to recover), 312

parameterization

multiple data centers, 293

reusability with configuration definitions,

49

N

scripts supporting, 44

Nano, 76, 124

passwords, 304

Netflix

patterns

Aminator, 66, 119, 126

for defining infrastructure

Chaos Monkey, 294

best practice, 151

Simian Army, 294

environments, 152-158

network resources, 28-30

running definition tools, 174

device configuration, 29

structuring infrastructure, 158-173

networked filesystems, 28

for managing server templates

NFRs (non-functional requirements), 211

automating template management, 131

Nomad, 92-93

best practices, 117

building for roles, 129-130

O

building templates, 121-122

object storage, 27

origin images, 123-125

Open VZ, 71

stock templates and, 117

OpenStack Heat (see Heat)

updating templates, 126-128

operational quality, testing for, 211 (see also

using templates, 118-121

continuity)

for provisioning servers

organic test suites, 197

bootstrapping new servers, 112

organizational principles

definition of provisioning, 99

empowering users, 317-322

hallmarks of effective provisioning, 99

evolutionary architecture, 308-311

server creation, 108-112

governance through continuous change

server provisioning, 100-108

management, 322-324

for updating/changing servers

332 | Index

best practices for, 133

R

configuration definition, 148-149

Rackspace/Rackspace Cloud, 21, 27

continuous deployment, 138-143

RancherOS, 76, 124

general patterns and practices, 136

ransoms, 303

hallmarks of effective, 134

RDS (Relational Database Service), 31, 171,

immutable servers, 143-147

248, 290

models for server change management,

red builds, 185

134-136

red-green-refactor rhythm, 221

penetration testing, 300

RedHat Atomic host, 76, 124

persistent storage, 291

refactoring, 214

phoenix deployment, 137, 235, 283

reference consumers, 255

portability, 37

reflective tests, 213

postmortems, 202, 316

reliability, 261

practices of IAC

remote command execution, 66, 259

availability, 17

repeatability

definition file use, 13

principle of, 12

individual vs. batch changes, 16

templates and, 122

self-documentation, 14

in testing, 216

for services, 82

repository as an artifact pattern, 247

testing, 16

reproducibility, 10, 216

versioning, 15

REST-based APIs, 23

pre-release library builds, 248

retrospectives, 316

principles of IAC

reusability, with configuration definitions, 49

changeability, 13

robustness, 17

consistency, 12

Rocket, 70

disposability, 11

role-inheritance hierarchy, 108

repeatability, 12

RSpec, 202, 220

reproducibility, 10

Ruby applications, managing, 72

for services, 81

Ruby Fog, 23

private IaaS clouds, 30

procedural scripts, 51

S

production deployment stage, 235

production readiness, 237

SaaS (Software as a Service), 31

programmability, 23

Safari Books Online, xix

Prometheus monitoring system, 281

Saltstack, 64, 205

provisioning (see also server provisioning)

sandboxes, 262-267

defined, 50, 99

scaled trunk-based development, 269

hallmarks of effective, 99

scheduling rigidity, 318

with procedural scripts, 51

scriptable interfaces, 42

public cloud providers, 34-35

scripts

public IaaS clouds, 30

general scripting languages, 67

Puppet, 69, 86, 102, 107, 112, 124, 131, 134, procedural, 51

139, 144, 149, 167, 203-208, 238, 261,

running ad hoc, 260

310-311

server creation patterns, 110

PXE (Preboot Execution Environment), 33

sharing for templates, 130

Python Boto, 23

supporting unattended execution, 43-45

using with interactive tools, 67

Q

SDN (software-defined networking), 29, 33

security

QA (quality analysts), 218, 220

automated hardening, 301

Index | 333

automated security tests, 211, 302

bootstrapping new servers

automated server configuration models, 65

configuration tools and, 112

automation, 298

pulling to bootstrap, 113

change pipelines, 302

pushing to bootstrap, 113

cloud accounts, 303-305

smoke testing new instances, 114

concerns with public clouds, 34

caching for optimization, 107

containers, 76-78

creating new servers, 101

countering security breaches, 298

deleting servers, 103

package provenance, 299

elements of server content, 105

penetration testing, 300

packaging server templates, 101

stock server templates, 118

reconfiguring hardware resources, 104

updates, 299

recovering from failure, 103

Selenium, 220

replacing servers, 102

self-documentation, 14

replacing vs. updating, 103

self-provisioned service instances, 248

resizing server pools, 104

self-service models, 319

server creation patterns

self-service solutions, 25

handcrafted servers, 109

server change management models

hot cloned servers, 111

ad hoc change management, 69, 134

server templates, 111

configuration definitions, 148-149

snowflake factories, 112

configuration synchronization, 69, 134

sources of new servers instances, 108

containerized services, 70, 136

server lifecycles, 62, 100

immutable infrastructures, 70, 103, 120, 135

server roles, 107, 129-130

patterns for

sources of server elements, 106

best practices, 133

timeline for, 100

continuous deployment, 138-143

typical tasks included, 100

general patterns and practices, 136

updating servers, 102

hallmarks of effective, 134

using templates, 118-121

immutable servers, 143-147

server sprawl, 6

server configuration tools (see also Ansible;

server templates

CFEngine; Chef; Puppet; Saltstack)

automating management, 131

change management models, 69

best practices for, 117

containers, 70-78

building, 121-122

goals for automated server management, 62

building for roles, 129-130

vs. infrastructure definition tools, 54

vs. cloning, 111

management functions, 62-69

customizing without booting, 125

overview of, 61

hierarchy of, 108

server management functions

naming conventions, 128

configuration from a central registry, 68

origin image options, 123-125

configuration tools, 64

packaging, 65, 101

general scripting languages, 67

service instance templates, 86

packaging server templates, 65, 101

stock templates, 117

running commands on servers, 66

Unikernel server templates, 66, 76, 125

server creation tools, 63, 101

updating, 126-128

server lifecycles, 62, 100

using, 118-121

server pools

versioning, 127-128

resizing, 104

serverless compute services, 26

using dynamic, 277

Serverspec, 202

server provisioning

service continuity

334 | Index

compartmentalization for, 281

self-service models, 319

defined, 276

TeamCity continuous integration server, 94

goals of, 276

technical debt, managing, 191

software design and, 279

templates (see server templates)

true availability, 276

Terraform, 41, 48, 50, 53-55, 104, 153-156, 161,

using dynamic server pools, 277

170-171, 174, 239-241, 255, 319

service discovery, 90

test doubles, 214, 254

service instance templates, 86

test instances, 249

Shadow IT, 4

Test Kitchen, 208

shared services, 85

test pyramid

Simian Army, 294

avoiding unbalanced test suites, 199

snowflake environments, 153

fan-in pipelines, 241

snowflake servers, 7, 112

goals of, 198

software

implementing needed layers, 201

deploying, 93-96

pipelines and, 233

designing for service continuity, 279

pruning tests, 202

managing legacy software products, 82

reviewing testing effectiveness, 202

third-party, 299

testing at lowest level, 200

software engineering practices

testing

agile development and, 179

A/B testing, 310

CD (continuous delivery), 187-190

agile approach to, 196

code quality, 190

automating, 197

continuous integration, 183-187

balanced test suite implementation, 202-211

high-quality systems, 180

benefits of, 196

managing major infrastructure changes, 192

during build stage, 230

version control systems, 182

failed test handling, 186

spikes, 309

goals of, 195

Spotify, 322

justifying cost of, 227

SSH-in-a-loop, 67

in local sandboxes, 262

stacks, concept of, 152

managing test code, 212-218

statefiles (Terraform), 156

managing test data, 217

static code analysis, 205

vs. monitoring, 211, 297

storage resources

organic test suites, 197

block storage, 27

penetration testing, 300

of dynamic infrastructure platforms, 26

as practice of IAC, 16

networked filesystems, 28

principles of useful, 216

object storage, 27

reflective tests, 213

stub servers, 214

reviewing effectiveness of, 202

syntax checking, 205, 230

server templates, 132

System of Record, 290

smoke testing new server instances, 114, 255

structuring test suites, 198-202

T

test and promote stack definitions, 157

TDD (test-driven development), 149, 221, 254,

test-driven development (TDD), 149

298

tool selection, 219

team structures

workflow for teams, 218-222

cross-functional teams, 321

threat modeling, 303

development/operations divide, 320

Three Amigos pattern, 221

divided function model, 317

tight coupling, 56, 85, 216

lean process theory, 317

tool building, vs. automation, 261

Index | 335

traffic routing, 286

Virtuozzo Open VZ, 71

trailblazer pipelines, 310

VMware Photon, 76, 124

trunk-based codebases, 268

12-factor applications, 279

W

typographical conventions, xviii

Warden, 70

Windows Containers, 70

U

workflow for IAC teams

Ubuntu Snappy, 76, 124

automation, 258-262

unattended execution, support for, 43

benefits of, 257

unattended mode, for CLI tools, 42

codebase organization patterns, 267-269

unbalanced test suites, 199

effective vs. ineffective, 269-273

Unikernel server templates, 66, 76, 125

hallmarks of effective, 257

unit tests, 202, 205, 230

local sandboxes, 262-267

updates, 299

vs. traditional workflow, 257

user experience design, 312

X

V

XP (Extreme Programming) (see Extreme Pro‐

Vagrant, 122, 167, 208, 233, 264-266

gramming)

VCS (Version Control Systems)

benefits of, 15

Z

branching failures, 185

zero downtime

feeder branches, 240

benefits of zero-downtime changes, 235, 282

for infrastructure management, 182

blue-green replacement, 282

low-level testing and, 204

canary replacement, 285

using standard, 47

phoenix replacement, 283

version tolerance, 253

reducing scope of replacement, 284

virtualization

traffic routing, 286

adopting, xiv-xvi, 309

with read-write data storage, 288

vendors, 36

Zookeeper, 55

virtual machines (VM), 73

336 | Index

About the Author

Kief Morris started his first bulletin board system (BBS) in Florida in the early 1990s,

later enrolling in a MSc program in computer science at the University of Tennessee

because it seemed like the easiest way to get a real Internet connection. Joining the CS

department’s system administration team gave him exposure to managing hundreds

of machines running a variety of Unix flavors. When the dot-com bubble began to

inflate, Kief moved to London, and he’s stayed in Europe ever since. Most of the

companies he worked for were post-startups, building and scaling. The titles he’s

been given or given himself include Deputy Technical Director, R&D Manager, Host‐

ing Manager, Technical Lead, Technical Architect, Consultant, and Practice Lead.

Across these roles, he has managed servers and other infrastructure using shell

scripts, Perl, CFEngine, Puppet, Chef, and Ansible. He has automatically provisioned

hardware with FAI and Cobbler, and managed servers on VMware, AWS, RackSpace

Cloud, and OpenStack. Kief became a ThoughtWorks consultant in 2010, where he

helps clients with ambitious missions take advantage of cloud and infrastructure

automation through Lean, Agile, and DevOps ways of working.

Colophon

The animal on the cover of Infrastructure as Code is Rüppell’s vulture ( Gyps rueppel‐

lii), native to the Sahel region of Africa (a geographic zone that serves as a transition

between the Sahara Desert and the savanna). It is named in honor of a 19th-century

German explorer and zoologist, Eduard Rüppell.

It is a large bird (with a wingspan of 7–8 feet and weighing 14–20 pounds) with mot‐

tled brown feathers and a yellowish-white neck and head. Like all vultures, this spe‐

cies is carnivorous and feeds almost exclusively on carrion. They use their sharp

talons and beaks to rip meat from carcasses, and have backward-facing spines on

their tongue to thoroughly scrape bones clean. While normally silent, these are very

social birds who will voice a loud squealing call at colony nesting sites or when fight‐

ing over food.

The Rüppell’s vulture is monogamous and mates for life, which can be 40–50 years

long. Breeding pairs build their nests near cliffs, out of sticks lined with grass and

leaves (and often use it for multiple years). Only one egg is laid each year—by the

time the next breeding season begins, the chick is just becoming independent. This

vulture does not fly very fast (about 22 mph), but will venture up to 90 miles from the

nest in search of food.

Rüppell’s vultures are the highest-flying birds on record; there is evidence of them

flying 37,000 feet above sea level, as high as commercial aircraft. They have a special

hemoglobin in their blood that allows them to absorb oxygen more efficiently at high

altitudes.

This species is considered endangered and populations have been in decline. Though

loss of habitat is one factor, the most serious threat is poisoning. The vulture is not

even the intended target: farmers often poison livestock carcasses to retaliate against

predators like lions and hyenas. As vultures identify a meal by sight and gather

around it in flocks, hundreds of birds can be killed each time.

Many of the animals on O’Reilly covers are endangered; all of them are important to

the world. To learn more about how you can help, go to animals.oreilly.com.

The cover image is from Cassell’s Natural History. The cover fonts are URW Type‐

writer and Guardian Sans. The text font is Adobe Minion Pro; the heading font is

Adobe Myriad Condensed; and the code font is Dalton Maag’s Ubuntu Mono.

Document Outline

- Copyright

- Table of Contents

- Preface

- How I Learned to Stop Worrying and to Love the Cloud

- My First Virtual Server Farm

- The Sorcerer’s Apprentice

- Cloud from Scratch

- Why I’m Writing This Book

- Who This Book Is For

- What Tools Are Covered

- How to Read This Book

- Conventions Used in This Book

- Safari® Books Online

- How to Contact Us

- Acknowledgments

- Part I. Foundations

- Chapter 1. Challenges and Principles

- Why Infrastructure as Code?

- What Is Infrastructure as Code?

- Goals of Infrastructure as Code

- Challenges with Dynamic Infrastructure

- Server Sprawl

- Configuration Drift

- Snowflake Servers

- Fragile Infrastructure

- Automation Fear

- Erosion

- Principles of Infrastructure as Code

- Systems Can Be Easily Reproduced

- Systems Are Disposable

- Systems Are Consistent

- Processes Are Repeatable

- Design Is Always Changing

- Practices

- Use Definition Files

- Self-Documented Systems and Processes

- Version All the Things

- Continuously Test Systems and Processes

- Small Changes Rather Than Batches

- Keep Services Available Continuously

- Antifragility: Beyond “Robust”

- The Secret Ingredient of Antifragile IT Systems

- Conclusion

- What’s Next?

- Chapter 2. Dynamic Infrastructure Platforms

- What Is a Dynamic Infrastructure Platform?

- Requirements for a Dynamic Infrastructure Platform

- Programmable

- On-Demand

- Self-Service

- Infrastructure Resources Provided by the Platform

- Compute Resources

- Storage Resources

- Network Resources

- Types of Dynamic Infrastructure Platforms

- Public IaaS Cloud

- Community IaaS Cloud

- Private IaaS Cloud

- Antipattern: Hand-Cranked Cloud

- Hybrid and Mixed Cloud Options

- Bare-Metal Clouds

- Deciding on a Dynamic Infrastructure Platform

- Public or Private?

- Cloud Portability

- Mechanical Sympathy with the Cloud and Virtualization

- Conclusion

- Chapter 3. Infrastructure Definition Tools

- Choosing Tools for Infrastructure as Code

- Requirement: Scriptable Interface

- Requirement: Unattended Mode for Command-Line Tools

- Requirement: Support for Unattended Execution

- Requirement: Externalized Configuration

- Configuration Definition Files

- Reusability with Configuration Definitions

- Working with Infrastructure Definition Tools

- Provisioning Infrastructure with Procedural Scripts

- Defining Infrastructure Declaratively

- Using Infrastructure Definition Tools

- Configuring Servers

- Configuration Registries

- Lightweight Configuration Registries

- Is a Configuration Registry a CMDB?

- The CMDB Audit and Fix Antipattern

- The Infrastructure-as-Code Approach to CMDB

- Conclusion

- Chapter 4. Server Configuration Tools

- Goals for Automated Server Management

- Tools for Different Server Management Functions

- Tools for Creating Servers

- Tools for Configuring Servers

- Tools for Packaging Server Templates

- Tools for Running Commands on Servers

- Using Configuration from a Central Registry

- Server Change Management Models

- Ad Hoc Change Management

- Configuration Synchronization

- Immutable Infrastructure

- Containerized Services

- Containers

- Managing Ruby Applications with and without Containers

- Are Containers Virtual Machines?

- Using Containers Rather than Virtual Machines

- Running Containers

- Security and Containers

- Conclusion

- Chapter 5. General Infrastructure Services

- Considerations for Infrastructure Services and Tools

- Prefer Tools with Externalized Configuration

- Prefer Tools That Assume Infrastructure Is Dynamic

- Prefer Products with Cloud-Compatible Licensing

- Prefer Products That Support Loose Coupling

- Sharing a Service Between Teams

- Service Instance Templates

- Monitoring: Alerting, Metrics, and Logging

- Alerting: Tell Me When Something Is Wrong

- Metrics: Collect and Analyze Data

- Log Aggregation and Analysis

- Service Discovery

- Server-Side Service Discovery Pattern

- Client-Side Service Discovery Pattern

- Distributed Process Management

- Orchestrating Processes with Server Roles

- Orchestrating Processes with Containers

- Scheduling Short Jobs

- Container Orchestration Tools

- Software Deployment

- Deployment Pipeline Software

- Packaging Software

- Conclusion

- Part II. Patterns

- Chapter 6. Patterns for Provisioning Servers

- Server Provisioning

- A Server’s Life

- What Goes onto a Server

- Types of Things on a Server

- Server Roles

- Patterns for Creating Servers

- Antipattern: Handcrafted Server

- Practice: Wrap Server Creation Options in a Script

- Antipattern: Hot Cloned Server

- Pattern: Server Template

- Antipattern: Snowflake Factory

- Patterns for Bootstrapping New Servers

- Pushing to Bootstrap

- Pulling to Bootstrap

- Practice: Smoke Test Every New Server Instance

- Conclusion

- Chapter 7. Patterns for Managing Server Templates

- Stock Templates: Can’t Someone Else Do It?

- Provisioning Servers Using Templates

- Provisioning at Creation Time

- Provisioning in the Template

- Balancing Provisioning Across Template and Creation

- The Process for Building a Server Template

- Creating Templates for Multiple Platforms

- Origin Images

- Antipattern: Hot Cloned Server Template

- Baking a Template from an OS Installation Image

- Baking a Template from a Stock Image

- Building a Template from a Unikernel

- Customizing a Server Template without Booting It

- Updating Server Templates

- Reheating a Template

- Baking a Fresh Template

- Versioning Server Templates

- Building Templates for Roles

- Pattern: Layered Template

- Sharing Base Scripts for Templates

- Automating Server Template Management

- Customizing Servers Before Baking

- Practice: Automatically Test Server Templates

- Conclusion

- Chapter 8. Patterns for Updating and Changing Servers

- Models for Server Change Management

- Ad Hoc Change Management

- Continuous Configuration Synchronization

- Immutable Servers

- Containerized Servers

- General Patterns and Practices

- Practice: Minimize Server Templates

- Practice: Replace Servers When the Server Template Changes

- Pattern: Phoenix Servers

- Patterns and Practices for Continuous Deployment

- Pattern: Masterless Configuration Management

- Practice: Apply Cron

- Continuous Synchronization Flow

- The Unconfigured Country

- Patterns and Practices for Immutable Servers

- Server Image as Artifact

- Simplifying Confirmation Management Tooling with Immutable Servers

- Immutable Server Flow

- Bootstrap Configuration with Immutable Servers

- Transactional Server Updates

- Practices for Managing Configuration Definitions

- Practice: Keep Configuration Definitions Minimal

- Organizing Definitions

- Practice: Use Test-Driven Development (TDD) to Drive Good Design

- Conclusion

- Chapter 9. Patterns for Defining Infrastructure

- Environments

- Antipattern: Handcrafted Infrastructure

- Defining Infrastructure Stacks as Code

- Antipattern: Per-Environment Definition Files

- Pattern: Reusable Definition Files

- Practice: Test and Promote Stack Definitions

- Self-Service Environments

- Organizing Infrastructure

- Antipattern: Monolithic Stack

- Avoid “Lift and Shift” When Migrating Infrastructure

- Dividing an Application Environment into Multiple Stacks

- Managing Configuration Parameters Between Stacks

- Sharing Infrastructure Elements

- Practice: Manage Application Code and Infrastructure Code Together

- Approaches to Sharing Definitions

- Practice: Align Infrastructure Design with the Scope of Change

- Example: An Infrastructure Design for Microservices

- Running Definition Tools

- Conclusion

- Part III. Practices

- Chapter 10. Software Engineering Practices for Infrastructure

- System Quality

- Poor-Quality Systems Are Difficult to Change

- High-Quality Systems Are Easier and Safer to Change

- Infrastructure Quality Through Code

- Fast Feedback

- VCS for Infrastructure Management

- What to Manage in a VCS

- Continuous Integration (CI)

- Continuously Testing Branches Is Not Continuous Integration

- Who Broke the Build?

- Ignoring Tests That Fail

- CI for Infrastructure

- Continuous Delivery (CD)

- The Problem with the Integration Phase

- Deployment Pipelines and Change Pipelines

- Continuous Delivery Is Not Continuous Deployment

- Code Quality

- Clean Code

- Practice: Manage Technical Debt

- Managing Major Infrastructure Changes

- Feature Toggles

- Conclusion

- Chapter 11. Testing Infrastructure Changes

- The Agile Approach to Testing

- Automating Tests for Fast Feedback

- Organically Building a Test Suite

- Structuring the Test Suite: The Test Pyramid

- Avoiding an Unbalanced Test Suite

- Practice: Test at the Lowest Level Possible

- Practice: Only Implement the Layers You Need

- Practice: Prune the Test Suite Often

- Practice: Continuously Review Testing Effectiveness

- Implementing a Balanced Test Suite

- Low-Level Testing

- Mid-Level Testing

- Higher-Level Tests

- Testing Operational Quality

- Managing Test Code

- Practice: Keep Test Code with the Code It Tests

- Anti-Pattern: Reflective Tests

- Techniques to Isolate Components for Testing

- Refactoring Components so They Can Be Isolated

- Managing External Dependencies

- Test Setup

- Roles and Workflow for Testing

- Principle: People Should Write Tests for What They Build

- The Test-Writing Habit

- Principle: Everyone Should Have Access to the Testing Tools

- The Value of a Quality Analyst

- Test-Driven Development (TDD)

- Conclusion

- Chapter 12. Change Management Pipelines for Infrastructure

- Benefits of a Change Management Pipeline

- Guidelines for Designing Pipelines

- Ensure Consistency Across Stages

- Get Immediate Feedback for Every Change

- Run Automated Stages Before Manual Stages

- Get Production-Like Sooner Rather Than Later

- Basic Pipeline Designs

- The Local Development Stage

- The Build Stage

- Publishing a Configuration Artifact

- Automated Testing Stages

- Manual Validation Stages

- Apply to Live

- The Rhythm of the Pipeline

- Practices for Using a Pipeline

- Practice: Prove Production Readiness for Every Change

- Practice: Start Every Change from the Beginning of the Pipeline

- Practice: Stop the Line on Any Failure

- Scaling Pipelines to More Complex Systems

- Pattern: Fan-In Pipelines

- Practice: Keep Pipelines Short

- Practice: Decouple Pipelines

- Integration Models

- Techniques for Handling Dependencies Between Components

- Pattern: Library Dependency

- Pattern: Self-Provisioned Service Instance

- Providing Pre-Release Library Builds

- Providing Test Instances of a Service to Consumers

- Using Test Instances of a Service as a Consumer

- Practices for Managing Interfaces Between Components

- Practice: Ensure Backward Compatibility of Interfaces

- Practice: Decouple Deploying from Releasing

- Practice: Use Version Tolerance

- Practice: Provide Test Doubles

- Practice: Test the Provider with Contract Tests

- Practice: Test with a Reference Consumer

- Practice: Smoke Test the Provider Interface

- Practice: Run Consumer-Driven Contract (CDC) Tests

- Conclusion

- Chapter 13. Workflow for the Infrastructure Team

- Automate Anything That Moves

- Make the Change Manually

- Ad Hoc Automation

- Autonomic Automation

- Autonomic Automation Workflow

- Using a Local Sandbox

- Using Local Virtualization for a Sandbox

- Example Workflow with Local Testing

- Using the Virtualization Platform for Sandboxes

- Codebase Organization Patterns

- Antipattern: Branch-Based Codebases

- Pattern: One Trunk per Component

- Pattern: Single Trunk

- Workflow Effectiveness

- Expediting Changes

- Code Reviews

- Fitting Governance into the Workflow

- Conclusion

- Chapter 14. Continuity with Dynamic Infrastructure

- Service Continuity

- True Availability

- Using Dynamic Server Pools for Recovery

- Software Design for Dynamic Infrastructure

- Compartmentalizing for Continuity

- Zero-Downtime Changes

- Pattern: Blue-Green Replacement

- Pattern: Phoenix Replacement

- Practice: Reduce the Scope of Replacement

- Pattern: Canary Replacement

- Routing Traffic for Zero-Downtime Replacements

- Zero-Downtime Changes with Data

- Data Continuity

- Replicating Data Redundantly

- Regenerating Data

- Delegating Data Persistence

- Backing Up to Persistent Storage

- Disaster Recovery

- Continuous Disaster Recovery

- The DR Plan: Planning for Disaster

- Practice: Prefer Rebuilding Things over Cold Standby

- Continuous Monitoring through the Pipeline

- Security

- Automatically Papering over Compromises

- Reliable Updates as a Defense

- Provenance of Packages

- Automated Hardening

- Automating Security Validation in the Pipeline

- The Change Pipeline as a Vulnerability

- Managing Security Risks with Cloud Accounts

- Conclusion

- Chapter 15. Organizing for Infrastructure as Code

- Evolutionary Architecture

- Learning under Fire

- Start with a Trailblazer Pipeline

- Measuring Effectiveness

- Agree on Desired Outcomes First

- Choose Metrics that Help the Team

- Track and Improve Cycle Time

- Use Kanban to Make Work Visible

- Retrospectives and Post-Mortems

- Organize to Empower Users

- Pitfalls of the Divided Function Model

- Adopt a Self-Service Model

- Take Full Responsibility: You Build It, You Run It

- Organizing into Cross-Functional Teams

- Governance through Continuous Change Management

- Provide Solid Building Blocks

- Prove Operational Readiness in the Pipeline

- Sharing Ownership of Operational Quality

- Review and Audit Automated Processes

- Optimize for Time to Detect and Fix Problems

- Conclusion: It’s Never Finished

- Index

- About the Author

- Colophon

Table of Contents

Copyright

Table of Contents

Preface

How I Learned to Stop Worrying and to Love the Cloud

My First Virtual Server Farm

The Sorcerer’s Apprentice

Cloud from Scratch

My First Virtual Server Farm

The Sorcerer’s Apprentice

Cloud from Scratch

Why I’m Writing This Book

Who This Book Is For

What Tools Are Covered

How to Read This Book

Conventions Used in This Book

Safari® Books Online

How to Contact Us

Acknowledgments

How I Learned to Stop Worrying and to Love the Cloud

My First Virtual Server Farm

The Sorcerer’s Apprentice

Cloud from Scratch

My First Virtual Server Farm

The Sorcerer’s Apprentice

Cloud from Scratch

Why I’m Writing This Book

Who This Book Is For

What Tools Are Covered

How to Read This Book

Conventions Used in This Book

Safari® Books Online

How to Contact Us

Acknowledgments

Part I. Foundations

Chapter 1. Challenges and Principles

Why Infrastructure as Code?

What Is Infrastructure as Code?

Goals of Infrastructure as Code

Goals of Infrastructure as Code

Challenges with Dynamic Infrastructure

Server Sprawl

Configuration Drift

Snowflake Servers

Fragile Infrastructure

Automation Fear

Erosion

Server Sprawl

Configuration Drift

Snowflake Servers

Fragile Infrastructure

Automation Fear

Erosion

Principles of Infrastructure as Code

Systems Can Be Easily Reproduced

Systems Are Disposable

Systems Are Consistent

Processes Are Repeatable

Design Is Always Changing

Systems Can Be Easily Reproduced

Systems Are Disposable

Systems Are Consistent

Processes Are Repeatable

Design Is Always Changing

Practices

Use Definition Files

Self-Documented Systems and Processes

Version All the Things

Continuously Test Systems and Processes

Small Changes Rather Than Batches

Keep Services Available Continuously

Use Definition Files

Self-Documented Systems and Processes

Version All the Things

Continuously Test Systems and Processes

Small Changes Rather Than Batches

Keep Services Available Continuously

Antifragility: Beyond “Robust”

The Secret Ingredient of Antifragile IT Systems

The Secret Ingredient of Antifragile IT Systems

Conclusion

What’s Next?

Why Infrastructure as Code?

What Is Infrastructure as Code?

Goals of Infrastructure as Code

Goals of Infrastructure as Code

Challenges with Dynamic Infrastructure

Server Sprawl

Configuration Drift

Snowflake Servers

Fragile Infrastructure

Automation Fear

Erosion

Server Sprawl

Configuration Drift

Snowflake Servers

Fragile Infrastructure

Automation Fear

Erosion

Principles of Infrastructure as Code

Systems Can Be Easily Reproduced

Systems Are Disposable

Systems Are Consistent

Processes Are Repeatable

Design Is Always Changing

Systems Can Be Easily Reproduced

Systems Are Disposable

Systems Are Consistent

Processes Are Repeatable

Design Is Always Changing

Practices

Use Definition Files

Self-Documented Systems and Processes

Version All the Things

Continuously Test Systems and Processes

Small Changes Rather Than Batches

Keep Services Available Continuously

Use Definition Files

Self-Documented Systems and Processes

Version All the Things

Continuously Test Systems and Processes

Small Changes Rather Than Batches

Keep Services Available Continuously

Antifragility: Beyond “Robust”

The Secret Ingredient of Antifragile IT Systems

The Secret Ingredient of Antifragile IT Systems

Conclusion

What’s Next?

Chapter 2. Dynamic Infrastructure Platforms

What Is a Dynamic Infrastructure Platform?

Requirements for a Dynamic Infrastructure Platform

Programmable

On-Demand

Self-Service

Programmable

On-Demand

Self-Service

Infrastructure Resources Provided by the Platform

Compute Resources

Storage Resources

Network Resources

Compute Resources

Storage Resources

Network Resources

Types of Dynamic Infrastructure Platforms

Public IaaS Cloud

Community IaaS Cloud

Private IaaS Cloud

Antipattern: Hand-Cranked Cloud

Hybrid and Mixed Cloud Options

Bare-Metal Clouds

Public IaaS Cloud

Community IaaS Cloud

Private IaaS Cloud

Antipattern: Hand-Cranked Cloud

Hybrid and Mixed Cloud Options

Bare-Metal Clouds

Deciding on a Dynamic Infrastructure Platform

Public or Private?

Cloud Portability

Public or Private?

Cloud Portability

Mechanical Sympathy with the Cloud and Virtualization

Conclusion

What Is a Dynamic Infrastructure Platform?

Requirements for a Dynamic Infrastructure Platform

Programmable

On-Demand

Self-Service

Programmable

On-Demand

Self-Service

Infrastructure Resources Provided by the Platform

Compute Resources

Storage Resources

Network Resources

Compute Resources

Storage Resources

Network Resources

Types of Dynamic Infrastructure Platforms

Public IaaS Cloud

Community IaaS Cloud

Private IaaS Cloud

Antipattern: Hand-Cranked Cloud

Hybrid and Mixed Cloud Options

Bare-Metal Clouds

Public IaaS Cloud

Community IaaS Cloud

Private IaaS Cloud

Antipattern: Hand-Cranked Cloud

Hybrid and Mixed Cloud Options

Bare-Metal Clouds

Deciding on a Dynamic Infrastructure Platform

Public or Private?

Cloud Portability

Public or Private?

Cloud Portability

Mechanical Sympathy with the Cloud and Virtualization

Conclusion

Chapter 3. Infrastructure Definition Tools

Choosing Tools for Infrastructure as Code

Requirement: Scriptable Interface

Requirement: Unattended Mode for Command-Line Tools

Requirement: Support for Unattended Execution

Requirement: Externalized Configuration

Requirement: Scriptable Interface

Requirement: Unattended Mode for Command-Line Tools

Requirement: Support for Unattended Execution

Requirement: Externalized Configuration

Configuration Definition Files

Reusability with Configuration Definitions

Reusability with Configuration Definitions

Working with Infrastructure Definition Tools

Provisioning Infrastructure with Procedural Scripts

Defining Infrastructure Declaratively

Using Infrastructure Definition Tools

Configuring Servers

Provisioning Infrastructure with Procedural Scripts

Defining Infrastructure Declaratively

Using Infrastructure Definition Tools

Configuring Servers

Configuration Registries

Lightweight Configuration Registries

Is a Configuration Registry a CMDB?

The CMDB Audit and Fix Antipattern

The Infrastructure-as-Code Approach to CMDB

Lightweight Configuration Registries

Is a Configuration Registry a CMDB?

The CMDB Audit and Fix Antipattern

The Infrastructure-as-Code Approach to CMDB

Conclusion

Choosing Tools for Infrastructure as Code

Requirement: Scriptable Interface

Requirement: Unattended Mode for Command-Line Tools

Requirement: Support for Unattended Execution

Requirement: Externalized Configuration

Requirement: Scriptable Interface

Requirement: Unattended Mode for Command-Line Tools

Requirement: Support for Unattended Execution

Requirement: Externalized Configuration

Configuration Definition Files

Reusability with Configuration Definitions

Reusability with Configuration Definitions

Working with Infrastructure Definition Tools

Provisioning Infrastructure with Procedural Scripts

Defining Infrastructure Declaratively

Using Infrastructure Definition Tools

Configuring Servers

Provisioning Infrastructure with Procedural Scripts

Defining Infrastructure Declaratively

Using Infrastructure Definition Tools

Configuring Servers

Configuration Registries

Lightweight Configuration Registries

Is a Configuration Registry a CMDB?

The CMDB Audit and Fix Antipattern

The Infrastructure-as-Code Approach to CMDB

Lightweight Configuration Registries

Is a Configuration Registry a CMDB?

The CMDB Audit and Fix Antipattern

The Infrastructure-as-Code Approach to CMDB

Conclusion

Chapter 4. Server Configuration Tools

Goals for Automated Server Management

Tools for Different Server Management Functions

Tools for Creating Servers

Tools for Configuring Servers

Tools for Packaging Server Templates

Tools for Running Commands on Servers

Using Configuration from a Central Registry

Tools for Creating Servers

Tools for Configuring Servers

Tools for Packaging Server Templates

Tools for Running Commands on Servers

Using Configuration from a Central Registry

Server Change Management Models

Ad Hoc Change Management

Configuration Synchronization

Immutable Infrastructure

Containerized Services

Ad Hoc Change Management

Configuration Synchronization

Immutable Infrastructure

Containerized Services

Containers

Managing Ruby Applications with and without Containers

Are Containers Virtual Machines?

Using Containers Rather than Virtual Machines

Running Containers

Security and Containers

Managing Ruby Applications with and without Containers

Are Containers Virtual Machines?

Using Containers Rather than Virtual Machines

Running Containers

Security and Containers

Conclusion

Goals for Automated Server Management

Tools for Different Server Management Functions

Tools for Creating Servers

Tools for Configuring Servers

Tools for Packaging Server Templates

Tools for Running Commands on Servers

Using Configuration from a Central Registry

Tools for Creating Servers

Tools for Configuring Servers

Tools for Packaging Server Templates

Tools for Running Commands on Servers

Using Configuration from a Central Registry

Server Change Management Models

Ad Hoc Change Management

Configuration Synchronization

Immutable Infrastructure

Containerized Services

Ad Hoc Change Management

Configuration Synchronization

Immutable Infrastructure

Containerized Services

Containers

Managing Ruby Applications with and without Containers

Are Containers Virtual Machines?

Using Containers Rather than Virtual Machines

Running Containers

Security and Containers

Managing Ruby Applications with and without Containers

Are Containers Virtual Machines?

Using Containers Rather than Virtual Machines

Running Containers

Security and Containers

Conclusion

Chapter 5. General Infrastructure Services

Considerations for Infrastructure Services and Tools

Prefer Tools with Externalized Configuration

Prefer Tools That Assume Infrastructure Is Dynamic

Prefer Products with Cloud-Compatible Licensing

Prefer Products That Support Loose Coupling

Prefer Tools with Externalized Configuration

Prefer Tools That Assume Infrastructure Is Dynamic

Prefer Products with Cloud-Compatible Licensing

Prefer Products That Support Loose Coupling

Sharing a Service Between Teams

Service Instance Templates

Service Instance Templates

Monitoring: Alerting, Metrics, and Logging

Alerting: Tell Me When Something Is Wrong

Metrics: Collect and Analyze Data

Log Aggregation and Analysis

Alerting: Tell Me When Something Is Wrong

Metrics: Collect and Analyze Data

Log Aggregation and Analysis

Service Discovery

Server-Side Service Discovery Pattern

Client-Side Service Discovery Pattern

Server-Side Service Discovery Pattern

Client-Side Service Discovery Pattern

Distributed Process Management

Orchestrating Processes with Server Roles

Orchestrating Processes with Containers

Scheduling Short Jobs

Container Orchestration Tools

Orchestrating Processes with Server Roles

Orchestrating Processes with Containers

Scheduling Short Jobs

Container Orchestration Tools

Software Deployment

Deployment Pipeline Software

Packaging Software

Deployment Pipeline Software

Packaging Software

Conclusion

Considerations for Infrastructure Services and Tools

Prefer Tools with Externalized Configuration

Prefer Tools That Assume Infrastructure Is Dynamic

Prefer Products with Cloud-Compatible Licensing

Prefer Products That Support Loose Coupling

Prefer Tools with Externalized Configuration

Prefer Tools That Assume Infrastructure Is Dynamic

Prefer Products with Cloud-Compatible Licensing

Prefer Products That Support Loose Coupling

Sharing a Service Between Teams

Service Instance Templates

Service Instance Templates

Monitoring: Alerting, Metrics, and Logging

Alerting: Tell Me When Something Is Wrong

Metrics: Collect and Analyze Data

Log Aggregation and Analysis

Alerting: Tell Me When Something Is Wrong

Metrics: Collect and Analyze Data

Log Aggregation and Analysis

Service Discovery

Server-Side Service Discovery Pattern

Client-Side Service Discovery Pattern

Server-Side Service Discovery Pattern

Client-Side Service Discovery Pattern

Distributed Process Management

Orchestrating Processes with Server Roles

Orchestrating Processes with Containers

Scheduling Short Jobs

Container Orchestration Tools

Orchestrating Processes with Server Roles

Orchestrating Processes with Containers

Scheduling Short Jobs

Container Orchestration Tools

Software Deployment

Deployment Pipeline Software

Packaging Software

Deployment Pipeline Software

Packaging Software

Conclusion

Chapter 1. Challenges and Principles

Why Infrastructure as Code?

What Is Infrastructure as Code?

Goals of Infrastructure as Code

Goals of Infrastructure as Code

Challenges with Dynamic Infrastructure

Server Sprawl

Configuration Drift

Snowflake Servers

Fragile Infrastructure

Automation Fear

Erosion

Server Sprawl

Configuration Drift

Snowflake Servers

Fragile Infrastructure

Automation Fear

Erosion

Principles of Infrastructure as Code

Systems Can Be Easily Reproduced

Systems Are Disposable

Systems Are Consistent

Processes Are Repeatable

Design Is Always Changing

Systems Can Be Easily Reproduced

Systems Are Disposable

Systems Are Consistent

Processes Are Repeatable

Design Is Always Changing

Practices

Use Definition Files

Self-Documented Systems and Processes

Version All the Things

Continuously Test Systems and Processes

Small Changes Rather Than Batches

Keep Services Available Continuously

Use Definition Files

Self-Documented Systems and Processes

Version All the Things

Continuously Test Systems and Processes

Small Changes Rather Than Batches

Keep Services Available Continuously

Antifragility: Beyond “Robust”

The Secret Ingredient of Antifragile IT Systems

The Secret Ingredient of Antifragile IT Systems

Conclusion

What’s Next?

Why Infrastructure as Code?

What Is Infrastructure as Code?

Goals of Infrastructure as Code

Goals of Infrastructure as Code

Challenges with Dynamic Infrastructure

Server Sprawl

Configuration Drift

Snowflake Servers

Fragile Infrastructure

Automation Fear

Erosion

Server Sprawl

Configuration Drift

Snowflake Servers

Fragile Infrastructure

Automation Fear

Erosion

Principles of Infrastructure as Code

Systems Can Be Easily Reproduced

Systems Are Disposable

Systems Are Consistent

Processes Are Repeatable

Design Is Always Changing

Systems Can Be Easily Reproduced

Systems Are Disposable

Systems Are Consistent

Processes Are Repeatable

Design Is Always Changing

Practices

Use Definition Files

Self-Documented Systems and Processes

Version All the Things

Continuously Test Systems and Processes

Small Changes Rather Than Batches

Keep Services Available Continuously

Use Definition Files

Self-Documented Systems and Processes

Version All the Things

Continuously Test Systems and Processes

Small Changes Rather Than Batches

Keep Services Available Continuously

Antifragility: Beyond “Robust”

The Secret Ingredient of Antifragile IT Systems

The Secret Ingredient of Antifragile IT Systems

Conclusion

What’s Next?

Chapter 2. Dynamic Infrastructure Platforms

What Is a Dynamic Infrastructure Platform?

Requirements for a Dynamic Infrastructure Platform

Programmable

On-Demand

Self-Service

Programmable

On-Demand

Self-Service

Infrastructure Resources Provided by the Platform

Compute Resources

Storage Resources

Network Resources

Compute Resources

Storage Resources

Network Resources

Types of Dynamic Infrastructure Platforms

Public IaaS Cloud

Community IaaS Cloud

Private IaaS Cloud

Antipattern: Hand-Cranked Cloud

Hybrid and Mixed Cloud Options

Bare-Metal Clouds

Public IaaS Cloud

Community IaaS Cloud

Private IaaS Cloud

Antipattern: Hand-Cranked Cloud

Hybrid and Mixed Cloud Options

Bare-Metal Clouds

Deciding on a Dynamic Infrastructure Platform

Public or Private?

Cloud Portability

Public or Private?

Cloud Portability

Mechanical Sympathy with the Cloud and Virtualization

Conclusion

What Is a Dynamic Infrastructure Platform?

Requirements for a Dynamic Infrastructure Platform

Programmable

On-Demand

Self-Service

Programmable

On-Demand

Self-Service

Infrastructure Resources Provided by the Platform

Compute Resources

Storage Resources

Network Resources

Compute Resources

Storage Resources

Network Resources

Types of Dynamic Infrastructure Platforms

Public IaaS Cloud

Community IaaS Cloud

Private IaaS Cloud

Antipattern: Hand-Cranked Cloud

Hybrid and Mixed Cloud Options

Bare-Metal Clouds

Public IaaS Cloud

Community IaaS Cloud

Private IaaS Cloud

Antipattern: Hand-Cranked Cloud

Hybrid and Mixed Cloud Options

Bare-Metal Clouds

Deciding on a Dynamic Infrastructure Platform

Public or Private?

Cloud Portability

Public or Private?

Cloud Portability

Mechanical Sympathy with the Cloud and Virtualization

Conclusion

Chapter 3. Infrastructure Definition Tools

Choosing Tools for Infrastructure as Code

Requirement: Scriptable Interface

Requirement: Unattended Mode for Command-Line Tools

Requirement: Support for Unattended Execution

Requirement: Externalized Configuration

Requirement: Scriptable Interface

Requirement: Unattended Mode for Command-Line Tools

Requirement: Support for Unattended Execution

Requirement: Externalized Configuration

Configuration Definition Files

Reusability with Configuration Definitions

Reusability with Configuration Definitions

Working with Infrastructure Definition Tools

Provisioning Infrastructure with Procedural Scripts

Defining Infrastructure Declaratively

Using Infrastructure Definition Tools

Configuring Servers

Provisioning Infrastructure with Procedural Scripts

Defining Infrastructure Declaratively

Using Infrastructure Definition Tools

Configuring Servers

Configuration Registries

Lightweight Configuration Registries

Is a Configuration Registry a CMDB?

The CMDB Audit and Fix Antipattern

The Infrastructure-as-Code Approach to CMDB

Lightweight Configuration Registries

Is a Configuration Registry a CMDB?

The CMDB Audit and Fix Antipattern

The Infrastructure-as-Code Approach to CMDB

Conclusion

Choosing Tools for Infrastructure as Code

Requirement: Scriptable Interface

Requirement: Unattended Mode for Command-Line Tools

Requirement: Support for Unattended Execution

Requirement: Externalized Configuration

Requirement: Scriptable Interface

Requirement: Unattended Mode for Command-Line Tools

Requirement: Support for Unattended Execution

Requirement: Externalized Configuration

Configuration Definition Files

Reusability with Configuration Definitions

Reusability with Configuration Definitions

Working with Infrastructure Definition Tools

Provisioning Infrastructure with Procedural Scripts

Defining Infrastructure Declaratively

Using Infrastructure Definition Tools

Configuring Servers

Provisioning Infrastructure with Procedural Scripts

Defining Infrastructure Declaratively

Using Infrastructure Definition Tools

Configuring Servers

Configuration Registries

Lightweight Configuration Registries

Is a Configuration Registry a CMDB?

The CMDB Audit and Fix Antipattern

The Infrastructure-as-Code Approach to CMDB

Lightweight Configuration Registries

Is a Configuration Registry a CMDB?

The CMDB Audit and Fix Antipattern

The Infrastructure-as-Code Approach to CMDB

Conclusion

Chapter 4. Server Configuration Tools

Goals for Automated Server Management

Tools for Different Server Management Functions

Tools for Creating Servers

Tools for Configuring Servers

Tools for Packaging Server Templates

Tools for Running Commands on Servers

Using Configuration from a Central Registry

Tools for Creating Servers

Tools for Configuring Servers

Tools for Packaging Server Templates

Tools for Running Commands on Servers

Using Configuration from a Central Registry

Server Change Management Models

Ad Hoc Change Management

Configuration Synchronization

Immutable Infrastructure

Containerized Services

Ad Hoc Change Management

Configuration Synchronization

Immutable Infrastructure

Containerized Services

Containers

Managing Ruby Applications with and without Containers

Are Containers Virtual Machines?

Using Containers Rather than Virtual Machines

Running Containers

Security and Containers

Managing Ruby Applications with and without Containers

Are Containers Virtual Machines?

Using Containers Rather than Virtual Machines

Running Containers

Security and Containers

Conclusion

Goals for Automated Server Management

Tools for Different Server Management Functions

Tools for Creating Servers

Tools for Configuring Servers

Tools for Packaging Server Templates

Tools for Running Commands on Servers

Using Configuration from a Central Registry

Tools for Creating Servers

Tools for Configuring Servers

Tools for Packaging Server Templates

Tools for Running Commands on Servers

Using Configuration from a Central Registry

Server Change Management Models

Ad Hoc Change Management

Configuration Synchronization

Immutable Infrastructure

Containerized Services

Ad Hoc Change Management

Configuration Synchronization

Immutable Infrastructure

Containerized Services

Containers

Managing Ruby Applications with and without Containers

Are Containers Virtual Machines?

Using Containers Rather than Virtual Machines

Running Containers

Security and Containers

Managing Ruby Applications with and without Containers

Are Containers Virtual Machines?

Using Containers Rather than Virtual Machines

Running Containers

Security and Containers

Conclusion

Chapter 5. General Infrastructure Services

Considerations for Infrastructure Services and Tools

Prefer Tools with Externalized Configuration

Prefer Tools That Assume Infrastructure Is Dynamic

Prefer Products with Cloud-Compatible Licensing

Prefer Products That Support Loose Coupling

Prefer Tools with Externalized Configuration

Prefer Tools That Assume Infrastructure Is Dynamic

Prefer Products with Cloud-Compatible Licensing

Prefer Products That Support Loose Coupling

Sharing a Service Between Teams

Service Instance Templates

Service Instance Templates

Monitoring: Alerting, Metrics, and Logging

Alerting: Tell Me When Something Is Wrong

Metrics: Collect and Analyze Data

Log Aggregation and Analysis

Alerting: Tell Me When Something Is Wrong

Metrics: Collect and Analyze Data

Log Aggregation and Analysis

Service Discovery

Server-Side Service Discovery Pattern

Client-Side Service Discovery Pattern

Server-Side Service Discovery Pattern

Client-Side Service Discovery Pattern

Distributed Process Management

Orchestrating Processes with Server Roles

Orchestrating Processes with Containers

Scheduling Short Jobs

Container Orchestration Tools

Orchestrating Processes with Server Roles

Orchestrating Processes with Containers

Scheduling Short Jobs

Container Orchestration Tools

Software Deployment

Deployment Pipeline Software

Packaging Software

Deployment Pipeline Software

Packaging Software

Conclusion

Considerations for Infrastructure Services and Tools

Prefer Tools with Externalized Configuration

Prefer Tools That Assume Infrastructure Is Dynamic

Prefer Products with Cloud-Compatible Licensing

Prefer Products That Support Loose Coupling

Prefer Tools with Externalized Configuration

Prefer Tools That Assume Infrastructure Is Dynamic

Prefer Products with Cloud-Compatible Licensing

Prefer Products That Support Loose Coupling

Sharing a Service Between Teams

Service Instance Templates

Service Instance Templates

Monitoring: Alerting, Metrics, and Logging

Alerting: Tell Me When Something Is Wrong

Metrics: Collect and Analyze Data

Log Aggregation and Analysis

Alerting: Tell Me When Something Is Wrong

Metrics: Collect and Analyze Data

Log Aggregation and Analysis

Service Discovery

Server-Side Service Discovery Pattern

Client-Side Service Discovery Pattern

Server-Side Service Discovery Pattern

Client-Side Service Discovery Pattern

Distributed Process Management

Orchestrating Processes with Server Roles

Orchestrating Processes with Containers

Scheduling Short Jobs

Container Orchestration Tools

Orchestrating Processes with Server Roles

Orchestrating Processes with Containers

Scheduling Short Jobs

Container Orchestration Tools

Software Deployment

Deployment Pipeline Software

Packaging Software

Deployment Pipeline Software

Packaging Software

Conclusion

Part II. Patterns

Chapter 6. Patterns for Provisioning Servers

Server Provisioning

A Server’s Life

What Goes onto a Server

Types of Things on a Server

Server Roles

A Server’s Life

What Goes onto a Server

Types of Things on a Server

Server Roles

Patterns for Creating Servers

Antipattern: Handcrafted Server

Practice: Wrap Server Creation Options in a Script

Antipattern: Hot Cloned Server

Pattern: Server Template

Antipattern: Snowflake Factory

Antipattern: Handcrafted Server

Practice: Wrap Server Creation Options in a Script

Antipattern: Hot Cloned Server

Pattern: Server Template

Antipattern: Snowflake Factory

Patterns for Bootstrapping New Servers

Pushing to Bootstrap

Pulling to Bootstrap

Practice: Smoke Test Every New Server Instance

Pushing to Bootstrap

Pulling to Bootstrap

Practice: Smoke Test Every New Server Instance

Conclusion

Server Provisioning

A Server’s Life

What Goes onto a Server

Types of Things on a Server

Server Roles

A Server’s Life

What Goes onto a Server

Types of Things on a Server

Server Roles

Patterns for Creating Servers

Antipattern: Handcrafted Server

Practice: Wrap Server Creation Options in a Script

Antipattern: Hot Cloned Server

Pattern: Server Template

Antipattern: Snowflake Factory

Antipattern: Handcrafted Server

Practice: Wrap Server Creation Options in a Script

Antipattern: Hot Cloned Server

Pattern: Server Template

Antipattern: Snowflake Factory

Patterns for Bootstrapping New Servers

Pushing to Bootstrap

Pulling to Bootstrap

Practice: Smoke Test Every New Server Instance

Pushing to Bootstrap

Pulling to Bootstrap

Practice: Smoke Test Every New Server Instance

Conclusion

Chapter 7. Patterns for Managing Server Templates

Stock Templates: Can’t Someone Else Do It?

Provisioning Servers Using Templates

Provisioning at Creation Time

Provisioning in the Template

Balancing Provisioning Across Template and Creation

Provisioning at Creation Time

Provisioning in the Template

Balancing Provisioning Across Template and Creation

The Process for Building a Server Template

Creating Templates for Multiple Platforms

Creating Templates for Multiple Platforms

Origin Images

Antipattern: Hot Cloned Server Template

Baking a Template from an OS Installation Image

Baking a Template from a Stock Image

Building a Template from a Unikernel

Customizing a Server Template without Booting It

Antipattern: Hot Cloned Server Template

Baking a Template from an OS Installation Image

Baking a Template from a Stock Image

Building a Template from a Unikernel

Customizing a Server Template without Booting It

Updating Server Templates

Reheating a Template

Baking a Fresh Template

Versioning Server Templates

Reheating a Template

Baking a Fresh Template

Versioning Server Templates

Building Templates for Roles

Pattern: Layered Template

Sharing Base Scripts for Templates

Pattern: Layered Template

Sharing Base Scripts for Templates

Automating Server Template Management

Customizing Servers Before Baking

Practice: Automatically Test Server Templates

Customizing Servers Before Baking

Practice: Automatically Test Server Templates

Conclusion

Stock Templates: Can’t Someone Else Do It?

Provisioning Servers Using Templates

Provisioning at Creation Time

Provisioning in the Template

Balancing Provisioning Across Template and Creation

Provisioning at Creation Time

Provisioning in the Template

Balancing Provisioning Across Template and Creation

The Process for Building a Server Template

Creating Templates for Multiple Platforms

Creating Templates for Multiple Platforms

Origin Images

Antipattern: Hot Cloned Server Template

Baking a Template from an OS Installation Image

Baking a Template from a Stock Image

Building a Template from a Unikernel

Customizing a Server Template without Booting It

Antipattern: Hot Cloned Server Template

Baking a Template from an OS Installation Image

Baking a Template from a Stock Image

Building a Template from a Unikernel

Customizing a Server Template without Booting It

Updating Server Templates

Reheating a Template

Baking a Fresh Template

Versioning Server Templates

Reheating a Template

Baking a Fresh Template

Versioning Server Templates

Building Templates for Roles

Pattern: Layered Template

Sharing Base Scripts for Templates

Pattern: Layered Template

Sharing Base Scripts for Templates

Automating Server Template Management

Customizing Servers Before Baking

Practice: Automatically Test Server Templates

Customizing Servers Before Baking

Practice: Automatically Test Server Templates

Conclusion

Chapter 8. Patterns for Updating and Changing Servers

Models for Server Change Management

Ad Hoc Change Management

Continuous Configuration Synchronization

Immutable Servers

Containerized Servers

Ad Hoc Change Management

Continuous Configuration Synchronization

Immutable Servers

Containerized Servers

General Patterns and Practices

Practice: Minimize Server Templates

Practice: Replace Servers When the Server Template Changes

Pattern: Phoenix Servers

Practice: Minimize Server Templates

Practice: Replace Servers When the Server Template Changes

Pattern: Phoenix Servers

Patterns and Practices for Continuous Deployment

Pattern: Masterless Configuration Management

Practice: Apply Cron

Continuous Synchronization Flow

The Unconfigured Country

Pattern: Masterless Configuration Management

Practice: Apply Cron

Continuous Synchronization Flow

The Unconfigured Country

Patterns and Practices for Immutable Servers

Server Image as Artifact

Simplifying Confirmation Management Tooling with Immutable Servers

Immutable Server Flow

Bootstrap Configuration with Immutable Servers

Transactional Server Updates

Server Image as Artifact

Simplifying Confirmation Management Tooling with Immutable Servers

Immutable Server Flow

Bootstrap Configuration with Immutable Servers

Transactional Server Updates

Practices for Managing Configuration Definitions

Practice: Keep Configuration Definitions Minimal

Organizing Definitions

Practice: Use Test-Driven Development (TDD) to Drive Good Design

Practice: Keep Configuration Definitions Minimal

Organizing Definitions

Practice: Use Test-Driven Development (TDD) to Drive Good Design

Conclusion

Models for Server Change Management

Ad Hoc Change Management

Continuous Configuration Synchronization

Immutable Servers

Containerized Servers

Ad Hoc Change Management

Continuous Configuration Synchronization

Immutable Servers

Containerized Servers

General Patterns and Practices

Practice: Minimize Server Templates

Practice: Replace Servers When the Server Template Changes

Pattern: Phoenix Servers

Practice: Minimize Server Templates

Practice: Replace Servers When the Server Template Changes

Pattern: Phoenix Servers

Patterns and Practices for Continuous Deployment

Pattern: Masterless Configuration Management

Practice: Apply Cron

Continuous Synchronization Flow

The Unconfigured Country

Pattern: Masterless Configuration Management

Practice: Apply Cron

Continuous Synchronization Flow

The Unconfigured Country

Patterns and Practices for Immutable Servers

Server Image as Artifact

Simplifying Confirmation Management Tooling with Immutable Servers

Immutable Server Flow

Bootstrap Configuration with Immutable Servers

Transactional Server Updates

Server Image as Artifact

Simplifying Confirmation Management Tooling with Immutable Servers

Immutable Server Flow

Bootstrap Configuration with Immutable Servers

Transactional Server Updates

Practices for Managing Configuration Definitions

Practice: Keep Configuration Definitions Minimal

Organizing Definitions

Practice: Use Test-Driven Development (TDD) to Drive Good Design

Practice: Keep Configuration Definitions Minimal

Organizing Definitions

Practice: Use Test-Driven Development (TDD) to Drive Good Design

Conclusion

Chapter 9. Patterns for Defining Infrastructure

Environments

Antipattern: Handcrafted Infrastructure

Defining Infrastructure Stacks as Code

Antipattern: Per-Environment Definition Files

Pattern: Reusable Definition Files

Practice: Test and Promote Stack Definitions

Self-Service Environments

Antipattern: Handcrafted Infrastructure

Defining Infrastructure Stacks as Code

Antipattern: Per-Environment Definition Files

Pattern: Reusable Definition Files

Practice: Test and Promote Stack Definitions

Self-Service Environments

Organizing Infrastructure

Antipattern: Monolithic Stack

Avoid “Lift and Shift” When Migrating Infrastructure

Dividing an Application Environment into Multiple Stacks

Managing Configuration Parameters Between Stacks

Sharing Infrastructure Elements

Practice: Manage Application Code and Infrastructure Code Together

Approaches to Sharing Definitions

Practice: Align Infrastructure Design with the Scope of Change

Example: An Infrastructure Design for Microservices

Antipattern: Monolithic Stack

Avoid “Lift and Shift” When Migrating Infrastructure

Dividing an Application Environment into Multiple Stacks

Managing Configuration Parameters Between Stacks

Sharing Infrastructure Elements

Practice: Manage Application Code and Infrastructure Code Together

Approaches to Sharing Definitions

Practice: Align Infrastructure Design with the Scope of Change

Example: An Infrastructure Design for Microservices

Running Definition Tools

Conclusion

Environments

Antipattern: Handcrafted Infrastructure

Defining Infrastructure Stacks as Code

Antipattern: Per-Environment Definition Files

Pattern: Reusable Definition Files

Practice: Test and Promote Stack Definitions

Self-Service Environments

Antipattern: Handcrafted Infrastructure

Defining Infrastructure Stacks as Code

Antipattern: Per-Environment Definition Files

Pattern: Reusable Definition Files

Practice: Test and Promote Stack Definitions

Self-Service Environments

Organizing Infrastructure

Antipattern: Monolithic Stack

Avoid “Lift and Shift” When Migrating Infrastructure

Dividing an Application Environment into Multiple Stacks

Managing Configuration Parameters Between Stacks

Sharing Infrastructure Elements

Practice: Manage Application Code and Infrastructure Code Together

Approaches to Sharing Definitions

Practice: Align Infrastructure Design with the Scope of Change

Example: An Infrastructure Design for Microservices

Antipattern: Monolithic Stack

Avoid “Lift and Shift” When Migrating Infrastructure

Dividing an Application Environment into Multiple Stacks

Managing Configuration Parameters Between Stacks

Sharing Infrastructure Elements

Practice: Manage Application Code and Infrastructure Code Together

Approaches to Sharing Definitions

Practice: Align Infrastructure Design with the Scope of Change

Example: An Infrastructure Design for Microservices

Running Definition Tools

Conclusion

Chapter 6. Patterns for Provisioning Servers

Server Provisioning

A Server’s Life

What Goes onto a Server

Types of Things on a Server

Server Roles

A Server’s Life

What Goes onto a Server

Types of Things on a Server

Server Roles

Patterns for Creating Servers

Antipattern: Handcrafted Server

Practice: Wrap Server Creation Options in a Script

Antipattern: Hot Cloned Server

Pattern: Server Template

Antipattern: Snowflake Factory

Antipattern: Handcrafted Server

Practice: Wrap Server Creation Options in a Script

Antipattern: Hot Cloned Server

Pattern: Server Template

Antipattern: Snowflake Factory

Patterns for Bootstrapping New Servers

Pushing to Bootstrap

Pulling to Bootstrap

Practice: Smoke Test Every New Server Instance

Pushing to Bootstrap

Pulling to Bootstrap

Practice: Smoke Test Every New Server Instance

Conclusion

Server Provisioning

A Server’s Life

What Goes onto a Server

Types of Things on a Server

Server Roles

A Server’s Life

What Goes onto a Server

Types of Things on a Server

Server Roles

Patterns for Creating Servers

Antipattern: Handcrafted Server

Practice: Wrap Server Creation Options in a Script

Antipattern: Hot Cloned Server

Pattern: Server Template

Antipattern: Snowflake Factory

Antipattern: Handcrafted Server

Practice: Wrap Server Creation Options in a Script

Antipattern: Hot Cloned Server

Pattern: Server Template

Antipattern: Snowflake Factory

Patterns for Bootstrapping New Servers

Pushing to Bootstrap

Pulling to Bootstrap

Practice: Smoke Test Every New Server Instance

Pushing to Bootstrap

Pulling to Bootstrap

Practice: Smoke Test Every New Server Instance

Conclusion

Chapter 7. Patterns for Managing Server Templates

Stock Templates: Can’t Someone Else Do It?

Provisioning Servers Using Templates

Provisioning at Creation Time

Provisioning in the Template

Balancing Provisioning Across Template and Creation

Provisioning at Creation Time

Provisioning in the Template

Balancing Provisioning Across Template and Creation

The Process for Building a Server Template

Creating Templates for Multiple Platforms

Creating Templates for Multiple Platforms

Origin Images

Antipattern: Hot Cloned Server Template

Baking a Template from an OS Installation Image

Baking a Template from a Stock Image

Building a Template from a Unikernel

Customizing a Server Template without Booting It

Antipattern: Hot Cloned Server Template

Baking a Template from an OS Installation Image

Baking a Template from a Stock Image

Building a Template from a Unikernel

Customizing a Server Template without Booting It

Updating Server Templates

Reheating a Template

Baking a Fresh Template

Versioning Server Templates

Reheating a Template

Baking a Fresh Template

Versioning Server Templates

Building Templates for Roles

Pattern: Layered Template

Sharing Base Scripts for Templates

Pattern: Layered Template

Sharing Base Scripts for Templates

Automating Server Template Management

Customizing Servers Before Baking

Practice: Automatically Test Server Templates

Customizing Servers Before Baking

Practice: Automatically Test Server Templates

Conclusion

Stock Templates: Can’t Someone Else Do It?

Provisioning Servers Using Templates

Provisioning at Creation Time

Provisioning in the Template

Balancing Provisioning Across Template and Creation

Provisioning at Creation Time

Provisioning in the Template

Balancing Provisioning Across Template and Creation

The Process for Building a Server Template

Creating Templates for Multiple Platforms

Creating Templates for Multiple Platforms

Origin Images

Antipattern: Hot Cloned Server Template

Baking a Template from an OS Installation Image

Baking a Template from a Stock Image

Building a Template from a Unikernel

Customizing a Server Template without Booting It

Antipattern: Hot Cloned Server Template

Baking a Template from an OS Installation Image

Baking a Template from a Stock Image

Building a Template from a Unikernel

Customizing a Server Template without Booting It

Updating Server Templates

Reheating a Template

Baking a Fresh Template

Versioning Server Templates

Reheating a Template

Baking a Fresh Template

Versioning Server Templates

Building Templates for Roles

Pattern: Layered Template

Sharing Base Scripts for Templates

Pattern: Layered Template

Sharing Base Scripts for Templates

Automating Server Template Management

Customizing Servers Before Baking

Practice: Automatically Test Server Templates

Customizing Servers Before Baking

Practice: Automatically Test Server Templates

Conclusion

Chapter 8. Patterns for Updating and Changing Servers

Models for Server Change Management

Ad Hoc Change Management

Continuous Configuration Synchronization

Immutable Servers

Containerized Servers

Ad Hoc Change Management

Continuous Configuration Synchronization

Immutable Servers

Containerized Servers

General Patterns and Practices

Practice: Minimize Server Templates

Practice: Replace Servers When the Server Template Changes

Pattern: Phoenix Servers

Practice: Minimize Server Templates

Practice: Replace Servers When the Server Template Changes

Pattern: Phoenix Servers

Patterns and Practices for Continuous Deployment

Pattern: Masterless Configuration Management

Practice: Apply Cron

Continuous Synchronization Flow

The Unconfigured Country

Pattern: Masterless Configuration Management

Practice: Apply Cron

Continuous Synchronization Flow

The Unconfigured Country

Patterns and Practices for Immutable Servers

Server Image as Artifact

Simplifying Confirmation Management Tooling with Immutable Servers

Immutable Server Flow

Bootstrap Configuration with Immutable Servers

Transactional Server Updates

Server Image as Artifact

Simplifying Confirmation Management Tooling with Immutable Servers

Immutable Server Flow

Bootstrap Configuration with Immutable Servers

Transactional Server Updates

Practices for Managing Configuration Definitions

Practice: Keep Configuration Definitions Minimal

Organizing Definitions

Practice: Use Test-Driven Development (TDD) to Drive Good Design

Practice: Keep Configuration Definitions Minimal

Organizing Definitions

Practice: Use Test-Driven Development (TDD) to Drive Good Design

Conclusion

Models for Server Change Management

Ad Hoc Change Management

Continuous Configuration Synchronization

Immutable Servers

Containerized Servers

Ad Hoc Change Management

Continuous Configuration Synchronization

Immutable Servers

Containerized Servers

General Patterns and Practices

Practice: Minimize Server Templates

Practice: Replace Servers When the Server Template Changes

Pattern: Phoenix Servers

Practice: Minimize Server Templates

Practice: Replace Servers When the Server Template Changes

Pattern: Phoenix Servers

Patterns and Practices for Continuous Deployment

Pattern: Masterless Configuration Management

Practice: Apply Cron

Continuous Synchronization Flow

The Unconfigured Country

Pattern: Masterless Configuration Management

Practice: Apply Cron

Continuous Synchronization Flow

The Unconfigured Country

Patterns and Practices for Immutable Servers

Server Image as Artifact

Simplifying Confirmation Management Tooling with Immutable Servers

Immutable Server Flow

Bootstrap Configuration with Immutable Servers

Transactional Server Updates

Server Image as Artifact

Simplifying Confirmation Management Tooling with Immutable Servers

Immutable Server Flow

Bootstrap Configuration with Immutable Servers

Transactional Server Updates

Practices for Managing Configuration Definitions

Practice: Keep Configuration Definitions Minimal

Organizing Definitions

Practice: Use Test-Driven Development (TDD) to Drive Good Design

Practice: Keep Configuration Definitions Minimal

Organizing Definitions

Practice: Use Test-Driven Development (TDD) to Drive Good Design

Conclusion

Chapter 9. Patterns for Defining Infrastructure

Environments

Antipattern: Handcrafted Infrastructure

Defining Infrastructure Stacks as Code

Antipattern: Per-Environment Definition Files

Pattern: Reusable Definition Files

Practice: Test and Promote Stack Definitions

Self-Service Environments

Antipattern: Handcrafted Infrastructure

Defining Infrastructure Stacks as Code

Antipattern: Per-Environment Definition Files

Pattern: Reusable Definition Files

Practice: Test and Promote Stack Definitions

Self-Service Environments

Organizing Infrastructure

Antipattern: Monolithic Stack

Avoid “Lift and Shift” When Migrating Infrastructure

Dividing an Application Environment into Multiple Stacks

Managing Configuration Parameters Between Stacks

Sharing Infrastructure Elements

Practice: Manage Application Code and Infrastructure Code Together

Approaches to Sharing Definitions

Practice: Align Infrastructure Design with the Scope of Change

Example: An Infrastructure Design for Microservices

Antipattern: Monolithic Stack

Avoid “Lift and Shift” When Migrating Infrastructure

Dividing an Application Environment into Multiple Stacks

Managing Configuration Parameters Between Stacks

Sharing Infrastructure Elements

Practice: Manage Application Code and Infrastructure Code Together

Approaches to Sharing Definitions

Practice: Align Infrastructure Design with the Scope of Change

Example: An Infrastructure Design for Microservices

Running Definition Tools

Conclusion

Environments

Antipattern: Handcrafted Infrastructure

Defining Infrastructure Stacks as Code

Antipattern: Per-Environment Definition Files

Pattern: Reusable Definition Files

Practice: Test and Promote Stack Definitions

Self-Service Environments

Antipattern: Handcrafted Infrastructure

Defining Infrastructure Stacks as Code

Antipattern: Per-Environment Definition Files

Pattern: Reusable Definition Files

Practice: Test and Promote Stack Definitions

Self-Service Environments

Organizing Infrastructure

Antipattern: Monolithic Stack

Avoid “Lift and Shift” When Migrating Infrastructure

Dividing an Application Environment into Multiple Stacks

Managing Configuration Parameters Between Stacks

Sharing Infrastructure Elements

Practice: Manage Application Code and Infrastructure Code Together

Approaches to Sharing Definitions

Practice: Align Infrastructure Design with the Scope of Change

Example: An Infrastructure Design for Microservices

Antipattern: Monolithic Stack

Avoid “Lift and Shift” When Migrating Infrastructure

Dividing an Application Environment into Multiple Stacks

Managing Configuration Parameters Between Stacks

Sharing Infrastructure Elements

Practice: Manage Application Code and Infrastructure Code Together

Approaches to Sharing Definitions

Practice: Align Infrastructure Design with the Scope of Change

Example: An Infrastructure Design for Microservices

Running Definition Tools

Conclusion

Part III. Practices

Chapter 10. Software Engineering Practices for Infrastructure

System Quality

Poor-Quality Systems Are Difficult to Change

High-Quality Systems Are Easier and Safer to Change

Infrastructure Quality Through Code

Fast Feedback

Poor-Quality Systems Are Difficult to Change

High-Quality Systems Are Easier and Safer to Change

Infrastructure Quality Through Code

Fast Feedback

VCS for Infrastructure Management

What to Manage in a VCS

What to Manage in a VCS

Continuous Integration (CI)

Continuously Testing Branches Is Not Continuous Integration

Who Broke the Build?

Ignoring Tests That Fail

CI for Infrastructure

Continuously Testing Branches Is Not Continuous Integration

Who Broke the Build?

Ignoring Tests That Fail

CI for Infrastructure

Continuous Delivery (CD)

The Problem with the Integration Phase

Deployment Pipelines and Change Pipelines

Continuous Delivery Is Not Continuous Deployment

The Problem with the Integration Phase

Deployment Pipelines and Change Pipelines

Continuous Delivery Is Not Continuous Deployment

Code Quality

Clean Code

Practice: Manage Technical Debt

Clean Code

Practice: Manage Technical Debt

Managing Major Infrastructure Changes

Feature Toggles

Feature Toggles

Conclusion

System Quality

Poor-Quality Systems Are Difficult to Change

High-Quality Systems Are Easier and Safer to Change

Infrastructure Quality Through Code

Fast Feedback

Poor-Quality Systems Are Difficult to Change

High-Quality Systems Are Easier and Safer to Change

Infrastructure Quality Through Code

Fast Feedback

VCS for Infrastructure Management

What to Manage in a VCS

What to Manage in a VCS

Continuous Integration (CI)

Continuously Testing Branches Is Not Continuous Integration

Who Broke the Build?

Ignoring Tests That Fail

CI for Infrastructure

Continuously Testing Branches Is Not Continuous Integration

Who Broke the Build?

Ignoring Tests That Fail

CI for Infrastructure

Continuous Delivery (CD)

The Problem with the Integration Phase

Deployment Pipelines and Change Pipelines

Continuous Delivery Is Not Continuous Deployment

The Problem with the Integration Phase

Deployment Pipelines and Change Pipelines

Continuous Delivery Is Not Continuous Deployment

Code Quality

Clean Code

Practice: Manage Technical Debt

Clean Code

Practice: Manage Technical Debt

Managing Major Infrastructure Changes

Feature Toggles

Feature Toggles

Conclusion

Chapter 11. Testing Infrastructure Changes

The Agile Approach to Testing

Automating Tests for Fast Feedback

Organically Building a Test Suite

Automating Tests for Fast Feedback

Organically Building a Test Suite

Structuring the Test Suite: The Test Pyramid

Avoiding an Unbalanced Test Suite

Practice: Test at the Lowest Level Possible

Practice: Only Implement the Layers You Need

Practice: Prune the Test Suite Often

Practice: Continuously Review Testing Effectiveness

Avoiding an Unbalanced Test Suite

Practice: Test at the Lowest Level Possible

Practice: Only Implement the Layers You Need

Practice: Prune the Test Suite Often

Practice: Continuously Review Testing Effectiveness

Implementing a Balanced Test Suite

Low-Level Testing

Mid-Level Testing

Higher-Level Tests

Testing Operational Quality

Low-Level Testing

Mid-Level Testing

Higher-Level Tests

Testing Operational Quality

Managing Test Code

Practice: Keep Test Code with the Code It Tests

Anti-Pattern: Reflective Tests

Techniques to Isolate Components for Testing

Refactoring Components so They Can Be Isolated

Managing External Dependencies

Test Setup

Practice: Keep Test Code with the Code It Tests

Anti-Pattern: Reflective Tests

Techniques to Isolate Components for Testing

Refactoring Components so They Can Be Isolated

Managing External Dependencies

Test Setup

Roles and Workflow for Testing

Principle: People Should Write Tests for What They Build

The Test-Writing Habit

Principle: Everyone Should Have Access to the Testing Tools

The Value of a Quality Analyst

Test-Driven Development (TDD)

Principle: People Should Write Tests for What They Build

The Test-Writing Habit

Principle: Everyone Should Have Access to the Testing Tools

The Value of a Quality Analyst

Test-Driven Development (TDD)

Conclusion

The Agile Approach to Testing

Automating Tests for Fast Feedback

Organically Building a Test Suite

Automating Tests for Fast Feedback

Organically Building a Test Suite

Structuring the Test Suite: The Test Pyramid

Avoiding an Unbalanced Test Suite

Practice: Test at the Lowest Level Possible

Practice: Only Implement the Layers You Need

Practice: Prune the Test Suite Often

Practice: Continuously Review Testing Effectiveness

Avoiding an Unbalanced Test Suite

Practice: Test at the Lowest Level Possible

Practice: Only Implement the Layers You Need

Practice: Prune the Test Suite Often

Practice: Continuously Review Testing Effectiveness

Implementing a Balanced Test Suite

Low-Level Testing

Mid-Level Testing

Higher-Level Tests

Testing Operational Quality

Low-Level Testing

Mid-Level Testing

Higher-Level Tests

Testing Operational Quality

Managing Test Code

Practice: Keep Test Code with the Code It Tests

Anti-Pattern: Reflective Tests

Techniques to Isolate Components for Testing

Refactoring Components so They Can Be Isolated

Managing External Dependencies

Test Setup

Practice: Keep Test Code with the Code It Tests

Anti-Pattern: Reflective Tests

Techniques to Isolate Components for Testing

Refactoring Components so They Can Be Isolated

Managing External Dependencies

Test Setup

Roles and Workflow for Testing

Principle: People Should Write Tests for What They Build

The Test-Writing Habit

Principle: Everyone Should Have Access to the Testing Tools

The Value of a Quality Analyst

Test-Driven Development (TDD)

Principle: People Should Write Tests for What They Build

The Test-Writing Habit

Principle: Everyone Should Have Access to the Testing Tools

The Value of a Quality Analyst

Test-Driven Development (TDD)

Conclusion

Chapter 12. Change Management Pipelines for Infrastructure

Benefits of a Change Management Pipeline

Guidelines for Designing Pipelines

Ensure Consistency Across Stages

Get Immediate Feedback for Every Change

Run Automated Stages Before Manual Stages

Get Production-Like Sooner Rather Than Later

Ensure Consistency Across Stages

Get Immediate Feedback for Every Change

Run Automated Stages Before Manual Stages

Get Production-Like Sooner Rather Than Later

Basic Pipeline Designs

The Local Development Stage

The Build Stage

Publishing a Configuration Artifact

Automated Testing Stages

Manual Validation Stages

Apply to Live

The Rhythm of the Pipeline

The Local Development Stage

The Build Stage

Publishing a Configuration Artifact

Automated Testing Stages

Manual Validation Stages

Apply to Live

The Rhythm of the Pipeline

Practices for Using a Pipeline

Practice: Prove Production Readiness for Every Change

Practice: Start Every Change from the Beginning of the Pipeline

Practice: Stop the Line on Any Failure

Practice: Prove Production Readiness for Every Change

Practice: Start Every Change from the Beginning of the Pipeline

Practice: Stop the Line on Any Failure

Scaling Pipelines to More Complex Systems

Pattern: Fan-In Pipelines

Practice: Keep Pipelines Short

Practice: Decouple Pipelines

Integration Models

Pattern: Fan-In Pipelines

Practice: Keep Pipelines Short

Practice: Decouple Pipelines

Integration Models

Techniques for Handling Dependencies Between Components

Pattern: Library Dependency

Pattern: Self-Provisioned Service Instance

Providing Pre-Release Library Builds

Providing Test Instances of a Service to Consumers

Using Test Instances of a Service as a Consumer

Pattern: Library Dependency

Pattern: Self-Provisioned Service Instance

Providing Pre-Release Library Builds

Providing Test Instances of a Service to Consumers

Using Test Instances of a Service as a Consumer

Practices for Managing Interfaces Between Components

Practice: Ensure Backward Compatibility of Interfaces

Practice: Decouple Deploying from Releasing

Practice: Use Version Tolerance

Practice: Provide Test Doubles

Practice: Test the Provider with Contract Tests

Practice: Test with a Reference Consumer

Practice: Smoke Test the Provider Interface

Practice: Run Consumer-Driven Contract (CDC) Tests

Practice: Ensure Backward Compatibility of Interfaces

Practice: Decouple Deploying from Releasing

Practice: Use Version Tolerance

Practice: Provide Test Doubles

Practice: Test the Provider with Contract Tests

Practice: Test with a Reference Consumer

Practice: Smoke Test the Provider Interface

Practice: Run Consumer-Driven Contract (CDC) Tests

Conclusion

Benefits of a Change Management Pipeline

Guidelines for Designing Pipelines

Ensure Consistency Across Stages

Get Immediate Feedback for Every Change

Run Automated Stages Before Manual Stages

Get Production-Like Sooner Rather Than Later

Ensure Consistency Across Stages

Get Immediate Feedback for Every Change

Run Automated Stages Before Manual Stages

Get Production-Like Sooner Rather Than Later

Basic Pipeline Designs

The Local Development Stage

The Build Stage

Publishing a Configuration Artifact

Automated Testing Stages

Manual Validation Stages

Apply to Live

The Rhythm of the Pipeline

The Local Development Stage

The Build Stage

Publishing a Configuration Artifact

Automated Testing Stages

Manual Validation Stages

Apply to Live

The Rhythm of the Pipeline

Practices for Using a Pipeline

Practice: Prove Production Readiness for Every Change

Practice: Start Every Change from the Beginning of the Pipeline

Practice: Stop the Line on Any Failure

Practice: Prove Production Readiness for Every Change

Practice: Start Every Change from the Beginning of the Pipeline

Practice: Stop the Line on Any Failure

Scaling Pipelines to More Complex Systems

Pattern: Fan-In Pipelines

Practice: Keep Pipelines Short

Practice: Decouple Pipelines

Integration Models

Pattern: Fan-In Pipelines

Practice: Keep Pipelines Short

Practice: Decouple Pipelines

Integration Models

Techniques for Handling Dependencies Between Components

Pattern: Library Dependency

Pattern: Self-Provisioned Service Instance

Providing Pre-Release Library Builds

Providing Test Instances of a Service to Consumers

Using Test Instances of a Service as a Consumer

Pattern: Library Dependency

Pattern: Self-Provisioned Service Instance

Providing Pre-Release Library Builds

Providing Test Instances of a Service to Consumers

Using Test Instances of a Service as a Consumer

Practices for Managing Interfaces Between Components

Practice: Ensure Backward Compatibility of Interfaces

Practice: Decouple Deploying from Releasing

Practice: Use Version Tolerance

Practice: Provide Test Doubles

Practice: Test the Provider with Contract Tests

Practice: Test with a Reference Consumer

Practice: Smoke Test the Provider Interface

Practice: Run Consumer-Driven Contract (CDC) Tests

Practice: Ensure Backward Compatibility of Interfaces

Practice: Decouple Deploying from Releasing

Practice: Use Version Tolerance

Practice: Provide Test Doubles

Practice: Test the Provider with Contract Tests

Practice: Test with a Reference Consumer

Practice: Smoke Test the Provider Interface

Practice: Run Consumer-Driven Contract (CDC) Tests

Conclusion

Chapter 13. Workflow for the Infrastructure Team

Automate Anything That Moves

Make the Change Manually

Ad Hoc Automation

Autonomic Automation

Autonomic Automation Workflow

Make the Change Manually

Ad Hoc Automation

Autonomic Automation

Autonomic Automation Workflow

Using a Local Sandbox

Using Local Virtualization for a Sandbox

Example Workflow with Local Testing

Using the Virtualization Platform for Sandboxes

Using Local Virtualization for a Sandbox

Example Workflow with Local Testing

Using the Virtualization Platform for Sandboxes

Codebase Organization Patterns

Antipattern: Branch-Based Codebases

Pattern: One Trunk per Component

Pattern: Single Trunk

Antipattern: Branch-Based Codebases

Pattern: One Trunk per Component

Pattern: Single Trunk

Workflow Effectiveness

Expediting Changes

Code Reviews

Fitting Governance into the Workflow

Expediting Changes

Code Reviews

Fitting Governance into the Workflow

Conclusion

Automate Anything That Moves

Make the Change Manually

Ad Hoc Automation

Autonomic Automation

Autonomic Automation Workflow

Make the Change Manually

Ad Hoc Automation

Autonomic Automation

Autonomic Automation Workflow

Using a Local Sandbox

Using Local Virtualization for a Sandbox

Example Workflow with Local Testing

Using the Virtualization Platform for Sandboxes

Using Local Virtualization for a Sandbox

Example Workflow with Local Testing

Using the Virtualization Platform for Sandboxes

Codebase Organization Patterns

Antipattern: Branch-Based Codebases

Pattern: One Trunk per Component

Pattern: Single Trunk

Antipattern: Branch-Based Codebases

Pattern: One Trunk per Component

Pattern: Single Trunk

Workflow Effectiveness

Expediting Changes

Code Reviews

Fitting Governance into the Workflow

Expediting Changes

Code Reviews

Fitting Governance into the Workflow

Conclusion

Chapter 14. Continuity with Dynamic Infrastructure

Service Continuity

True Availability

Using Dynamic Server Pools for Recovery

Software Design for Dynamic Infrastructure

Compartmentalizing for Continuity

True Availability

Using Dynamic Server Pools for Recovery

Software Design for Dynamic Infrastructure

Compartmentalizing for Continuity

Zero-Downtime Changes

Pattern: Blue-Green Replacement

Pattern: Phoenix Replacement

Practice: Reduce the Scope of Replacement

Pattern: Canary Replacement

Routing Traffic for Zero-Downtime Replacements

Zero-Downtime Changes with Data

Pattern: Blue-Green Replacement

Pattern: Phoenix Replacement

Practice: Reduce the Scope of Replacement

Pattern: Canary Replacement

Routing Traffic for Zero-Downtime Replacements

Zero-Downtime Changes with Data

Data Continuity

Replicating Data Redundantly

Regenerating Data

Delegating Data Persistence

Backing Up to Persistent Storage

Replicating Data Redundantly

Regenerating Data

Delegating Data Persistence

Backing Up to Persistent Storage

Disaster Recovery

Continuous Disaster Recovery

The DR Plan: Planning for Disaster

Practice: Prefer Rebuilding Things over Cold Standby

Continuous Monitoring through the Pipeline

Continuous Disaster Recovery

The DR Plan: Planning for Disaster

Practice: Prefer Rebuilding Things over Cold Standby

Continuous Monitoring through the Pipeline

Security

Automatically Papering over Compromises

Reliable Updates as a Defense

Provenance of Packages

Automated Hardening

Automating Security Validation in the Pipeline

The Change Pipeline as a Vulnerability

Managing Security Risks with Cloud Accounts

Automatically Papering over Compromises

Reliable Updates as a Defense

Provenance of Packages

Automated Hardening

Automating Security Validation in the Pipeline

The Change Pipeline as a Vulnerability

Managing Security Risks with Cloud Accounts

Conclusion

Service Continuity

True Availability

Using Dynamic Server Pools for Recovery

Software Design for Dynamic Infrastructure

Compartmentalizing for Continuity

True Availability

Using Dynamic Server Pools for Recovery

Software Design for Dynamic Infrastructure

Compartmentalizing for Continuity

Zero-Downtime Changes

Pattern: Blue-Green Replacement

Pattern: Phoenix Replacement

Practice: Reduce the Scope of Replacement

Pattern: Canary Replacement

Routing Traffic for Zero-Downtime Replacements

Zero-Downtime Changes with Data

Pattern: Blue-Green Replacement

Pattern: Phoenix Replacement

Practice: Reduce the Scope of Replacement

Pattern: Canary Replacement

Routing Traffic for Zero-Downtime Replacements

Zero-Downtime Changes with Data

Data Continuity

Replicating Data Redundantly

Regenerating Data

Delegating Data Persistence

Backing Up to Persistent Storage

Replicating Data Redundantly

Regenerating Data

Delegating Data Persistence

Backing Up to Persistent Storage

Disaster Recovery

Continuous Disaster Recovery

The DR Plan: Planning for Disaster

Practice: Prefer Rebuilding Things over Cold Standby

Continuous Monitoring through the Pipeline

Continuous Disaster Recovery

The DR Plan: Planning for Disaster

Practice: Prefer Rebuilding Things over Cold Standby

Continuous Monitoring through the Pipeline

Security

Automatically Papering over Compromises

Reliable Updates as a Defense

Provenance of Packages

Automated Hardening

Automating Security Validation in the Pipeline

The Change Pipeline as a Vulnerability

Managing Security Risks with Cloud Accounts

Automatically Papering over Compromises

Reliable Updates as a Defense

Provenance of Packages

Automated Hardening

Automating Security Validation in the Pipeline

The Change Pipeline as a Vulnerability

Managing Security Risks with Cloud Accounts

Conclusion

Chapter 15. Organizing for Infrastructure as Code

Evolutionary Architecture

Learning under Fire

Start with a Trailblazer Pipeline

Learning under Fire

Start with a Trailblazer Pipeline

Measuring Effectiveness

Agree on Desired Outcomes First

Choose Metrics that Help the Team

Track and Improve Cycle Time

Use Kanban to Make Work Visible

Retrospectives and Post-Mortems

Agree on Desired Outcomes First

Choose Metrics that Help the Team

Track and Improve Cycle Time

Use Kanban to Make Work Visible

Retrospectives and Post-Mortems

Organize to Empower Users

Pitfalls of the Divided Function Model

Adopt a Self-Service Model

Take Full Responsibility: You Build It, You Run It

Organizing into Cross-Functional Teams

Pitfalls of the Divided Function Model

Adopt a Self-Service Model

Take Full Responsibility: You Build It, You Run It

Organizing into Cross-Functional Teams

Governance through Continuous Change Management

Provide Solid Building Blocks

Prove Operational Readiness in the Pipeline

Sharing Ownership of Operational Quality

Review and Audit Automated Processes

Optimize for Time to Detect and Fix Problems

Provide Solid Building Blocks

Prove Operational Readiness in the Pipeline

Sharing Ownership of Operational Quality

Review and Audit Automated Processes

Optimize for Time to Detect and Fix Problems

Conclusion: It’s Never Finished

Evolutionary Architecture

Learning under Fire

Start with a Trailblazer Pipeline

Learning under Fire

Start with a Trailblazer Pipeline

Measuring Effectiveness

Agree on Desired Outcomes First

Choose Metrics that Help the Team

Track and Improve Cycle Time

Use Kanban to Make Work Visible

Retrospectives and Post-Mortems

Agree on Desired Outcomes First

Choose Metrics that Help the Team

Track and Improve Cycle Time

Use Kanban to Make Work Visible

Retrospectives and Post-Mortems

Organize to Empower Users

Pitfalls of the Divided Function Model

Adopt a Self-Service Model

Take Full Responsibility: You Build It, You Run It

Organizing into Cross-Functional Teams

Pitfalls of the Divided Function Model

Adopt a Self-Service Model

Take Full Responsibility: You Build It, You Run It

Organizing into Cross-Functional Teams

Governance through Continuous Change Management

Provide Solid Building Blocks

Prove Operational Readiness in the Pipeline

Sharing Ownership of Operational Quality

Review and Audit Automated Processes

Optimize for Time to Detect and Fix Problems

Provide Solid Building Blocks

Prove Operational Readiness in the Pipeline

Sharing Ownership of Operational Quality

Review and Audit Automated Processes

Optimize for Time to Detect and Fix Problems

Conclusion: It’s Never Finished

Chapter 10. Software Engineering Practices for Infrastructure

System Quality

Poor-Quality Systems Are Difficult to Change

High-Quality Systems Are Easier and Safer to Change

Infrastructure Quality Through Code

Fast Feedback

Poor-Quality Systems Are Difficult to Change

High-Quality Systems Are Easier and Safer to Change

Infrastructure Quality Through Code

Fast Feedback

VCS for Infrastructure Management

What to Manage in a VCS

What to Manage in a VCS

Continuous Integration (CI)

Continuously Testing Branches Is Not Continuous Integration

Who Broke the Build?

Ignoring Tests That Fail

CI for Infrastructure

Continuously Testing Branches Is Not Continuous Integration

Who Broke the Build?

Ignoring Tests That Fail

CI for Infrastructure

Continuous Delivery (CD)

The Problem with the Integration Phase

Deployment Pipelines and Change Pipelines

Continuous Delivery Is Not Continuous Deployment

The Problem with the Integration Phase

Deployment Pipelines and Change Pipelines

Continuous Delivery Is Not Continuous Deployment

Code Quality

Clean Code

Practice: Manage Technical Debt

Clean Code

Practice: Manage Technical Debt

Managing Major Infrastructure Changes

Feature Toggles

Feature Toggles

Conclusion

System Quality

Poor-Quality Systems Are Difficult to Change

High-Quality Systems Are Easier and Safer to Change

Infrastructure Quality Through Code

Fast Feedback

Poor-Quality Systems Are Difficult to Change

High-Quality Systems Are Easier and Safer to Change

Infrastructure Quality Through Code

Fast Feedback

VCS for Infrastructure Management

What to Manage in a VCS

What to Manage in a VCS

Continuous Integration (CI)

Continuously Testing Branches Is Not Continuous Integration

Who Broke the Build?

Ignoring Tests That Fail

CI for Infrastructure

Continuously Testing Branches Is Not Continuous Integration

Who Broke the Build?

Ignoring Tests That Fail

CI for Infrastructure

Continuous Delivery (CD)

The Problem with the Integration Phase

Deployment Pipelines and Change Pipelines

Continuous Delivery Is Not Continuous Deployment

The Problem with the Integration Phase

Deployment Pipelines and Change Pipelines

Continuous Delivery Is Not Continuous Deployment

Code Quality

Clean Code

Practice: Manage Technical Debt

Clean Code

Practice: Manage Technical Debt

Managing Major Infrastructure Changes

Feature Toggles

Feature Toggles

Conclusion

Chapter 11. Testing Infrastructure Changes

The Agile Approach to Testing

Automating Tests for Fast Feedback

Organically Building a Test Suite

Automating Tests for Fast Feedback

Organically Building a Test Suite

Structuring the Test Suite: The Test Pyramid

Avoiding an Unbalanced Test Suite

Practice: Test at the Lowest Level Possible

Practice: Only Implement the Layers You Need

Practice: Prune the Test Suite Often

Practice: Continuously Review Testing Effectiveness

Avoiding an Unbalanced Test Suite

Practice: Test at the Lowest Level Possible

Practice: Only Implement the Layers You Need

Practice: Prune the Test Suite Often

Practice: Continuously Review Testing Effectiveness

Implementing a Balanced Test Suite

Low-Level Testing

Mid-Level Testing

Higher-Level Tests

Testing Operational Quality

Low-Level Testing

Mid-Level Testing

Higher-Level Tests

Testing Operational Quality

Managing Test Code

Practice: Keep Test Code with the Code It Tests

Anti-Pattern: Reflective Tests

Techniques to Isolate Components for Testing

Refactoring Components so They Can Be Isolated

Managing External Dependencies

Test Setup

Practice: Keep Test Code with the Code It Tests

Anti-Pattern: Reflective Tests

Techniques to Isolate Components for Testing

Refactoring Components so They Can Be Isolated

Managing External Dependencies

Test Setup

Roles and Workflow for Testing

Principle: People Should Write Tests for What They Build

The Test-Writing Habit

Principle: Everyone Should Have Access to the Testing Tools

The Value of a Quality Analyst

Test-Driven Development (TDD)

Principle: People Should Write Tests for What They Build

The Test-Writing Habit

Principle: Everyone Should Have Access to the Testing Tools

The Value of a Quality Analyst

Test-Driven Development (TDD)

Conclusion

The Agile Approach to Testing

Automating Tests for Fast Feedback

Organically Building a Test Suite

Automating Tests for Fast Feedback

Organically Building a Test Suite

Structuring the Test Suite: The Test Pyramid

Avoiding an Unbalanced Test Suite

Practice: Test at the Lowest Level Possible

Practice: Only Implement the Layers You Need

Practice: Prune the Test Suite Often

Practice: Continuously Review Testing Effectiveness

Avoiding an Unbalanced Test Suite

Practice: Test at the Lowest Level Possible

Practice: Only Implement the Layers You Need

Practice: Prune the Test Suite Often

Practice: Continuously Review Testing Effectiveness

Implementing a Balanced Test Suite

Low-Level Testing

Mid-Level Testing

Higher-Level Tests

Testing Operational Quality

Low-Level Testing

Mid-Level Testing

Higher-Level Tests

Testing Operational Quality

Managing Test Code

Practice: Keep Test Code with the Code It Tests

Anti-Pattern: Reflective Tests

Techniques to Isolate Components for Testing

Refactoring Components so They Can Be Isolated

Managing External Dependencies

Test Setup

Practice: Keep Test Code with the Code It Tests

Anti-Pattern: Reflective Tests

Techniques to Isolate Components for Testing

Refactoring Components so They Can Be Isolated

Managing External Dependencies

Test Setup

Roles and Workflow for Testing

Principle: People Should Write Tests for What They Build

The Test-Writing Habit

Principle: Everyone Should Have Access to the Testing Tools

The Value of a Quality Analyst

Test-Driven Development (TDD)

Principle: People Should Write Tests for What They Build

The Test-Writing Habit

Principle: Everyone Should Have Access to the Testing Tools

The Value of a Quality Analyst

Test-Driven Development (TDD)

Conclusion

Chapter 12. Change Management Pipelines for Infrastructure

Benefits of a Change Management Pipeline

Guidelines for Designing Pipelines

Ensure Consistency Across Stages

Get Immediate Feedback for Every Change

Run Automated Stages Before Manual Stages

Get Production-Like Sooner Rather Than Later

Ensure Consistency Across Stages

Get Immediate Feedback for Every Change

Run Automated Stages Before Manual Stages

Get Production-Like Sooner Rather Than Later

Basic Pipeline Designs

The Local Development Stage

The Build Stage

Publishing a Configuration Artifact

Automated Testing Stages

Manual Validation Stages

Apply to Live

The Rhythm of the Pipeline

The Local Development Stage

The Build Stage

Publishing a Configuration Artifact

Automated Testing Stages

Manual Validation Stages

Apply to Live

The Rhythm of the Pipeline

Practices for Using a Pipeline

Practice: Prove Production Readiness for Every Change

Practice: Start Every Change from the Beginning of the Pipeline

Practice: Stop the Line on Any Failure

Practice: Prove Production Readiness for Every Change

Practice: Start Every Change from the Beginning of the Pipeline

Practice: Stop the Line on Any Failure

Scaling Pipelines to More Complex Systems

Pattern: Fan-In Pipelines

Practice: Keep Pipelines Short

Practice: Decouple Pipelines

Integration Models

Pattern: Fan-In Pipelines

Practice: Keep Pipelines Short

Practice: Decouple Pipelines

Integration Models

Techniques for Handling Dependencies Between Components

Pattern: Library Dependency

Pattern: Self-Provisioned Service Instance

Providing Pre-Release Library Builds

Providing Test Instances of a Service to Consumers

Using Test Instances of a Service as a Consumer

Pattern: Library Dependency

Pattern: Self-Provisioned Service Instance

Providing Pre-Release Library Builds

Providing Test Instances of a Service to Consumers

Using Test Instances of a Service as a Consumer

Practices for Managing Interfaces Between Components

Practice: Ensure Backward Compatibility of Interfaces

Practice: Decouple Deploying from Releasing

Practice: Use Version Tolerance

Practice: Provide Test Doubles

Practice: Test the Provider with Contract Tests

Practice: Test with a Reference Consumer

Practice: Smoke Test the Provider Interface

Practice: Run Consumer-Driven Contract (CDC) Tests

Practice: Ensure Backward Compatibility of Interfaces

Practice: Decouple Deploying from Releasing

Practice: Use Version Tolerance

Practice: Provide Test Doubles

Practice: Test the Provider with Contract Tests

Practice: Test with a Reference Consumer

Practice: Smoke Test the Provider Interface

Practice: Run Consumer-Driven Contract (CDC) Tests

Conclusion

Benefits of a Change Management Pipeline

Guidelines for Designing Pipelines

Ensure Consistency Across Stages

Get Immediate Feedback for Every Change

Run Automated Stages Before Manual Stages

Get Production-Like Sooner Rather Than Later

Ensure Consistency Across Stages

Get Immediate Feedback for Every Change

Run Automated Stages Before Manual Stages

Get Production-Like Sooner Rather Than Later

Basic Pipeline Designs

The Local Development Stage

The Build Stage

Publishing a Configuration Artifact

Automated Testing Stages

Manual Validation Stages

Apply to Live

The Rhythm of the Pipeline

The Local Development Stage

The Build Stage

Publishing a Configuration Artifact

Automated Testing Stages

Manual Validation Stages

Apply to Live

The Rhythm of the Pipeline

Practices for Using a Pipeline

Practice: Prove Production Readiness for Every Change

Practice: Start Every Change from the Beginning of the Pipeline

Practice: Stop the Line on Any Failure

Practice: Prove Production Readiness for Every Change

Practice: Start Every Change from the Beginning of the Pipeline

Practice: Stop the Line on Any Failure

Scaling Pipelines to More Complex Systems

Pattern: Fan-In Pipelines

Practice: Keep Pipelines Short

Practice: Decouple Pipelines

Integration Models

Pattern: Fan-In Pipelines

Practice: Keep Pipelines Short

Practice: Decouple Pipelines

Integration Models

Techniques for Handling Dependencies Between Components

Pattern: Library Dependency

Pattern: Self-Provisioned Service Instance

Providing Pre-Release Library Builds

Providing Test Instances of a Service to Consumers

Using Test Instances of a Service as a Consumer

Pattern: Library Dependency

Pattern: Self-Provisioned Service Instance

Providing Pre-Release Library Builds

Providing Test Instances of a Service to Consumers

Using Test Instances of a Service as a Consumer

Practices for Managing Interfaces Between Components

Practice: Ensure Backward Compatibility of Interfaces

Practice: Decouple Deploying from Releasing

Practice: Use Version Tolerance

Practice: Provide Test Doubles

Practice: Test the Provider with Contract Tests

Practice: Test with a Reference Consumer

Practice: Smoke Test the Provider Interface

Practice: Run Consumer-Driven Contract (CDC) Tests

Practice: Ensure Backward Compatibility of Interfaces

Practice: Decouple Deploying from Releasing

Practice: Use Version Tolerance

Practice: Provide Test Doubles

Practice: Test the Provider with Contract Tests

Practice: Test with a Reference Consumer

Practice: Smoke Test the Provider Interface

Practice: Run Consumer-Driven Contract (CDC) Tests

Conclusion

Chapter 13. Workflow for the Infrastructure Team

Automate Anything That Moves

Make the Change Manually

Ad Hoc Automation

Autonomic Automation

Autonomic Automation Workflow

Make the Change Manually

Ad Hoc Automation

Autonomic Automation

Autonomic Automation Workflow

Using a Local Sandbox

Using Local Virtualization for a Sandbox

Example Workflow with Local Testing

Using the Virtualization Platform for Sandboxes

Using Local Virtualization for a Sandbox

Example Workflow with Local Testing

Using the Virtualization Platform for Sandboxes

Codebase Organization Patterns

Antipattern: Branch-Based Codebases

Pattern: One Trunk per Component

Pattern: Single Trunk

Antipattern: Branch-Based Codebases

Pattern: One Trunk per Component

Pattern: Single Trunk

Workflow Effectiveness

Expediting Changes

Code Reviews

Fitting Governance into the Workflow

Expediting Changes

Code Reviews

Fitting Governance into the Workflow

Conclusion

Automate Anything That Moves

Make the Change Manually

Ad Hoc Automation

Autonomic Automation

Autonomic Automation Workflow

Make the Change Manually

Ad Hoc Automation

Autonomic Automation

Autonomic Automation Workflow

Using a Local Sandbox

Using Local Virtualization for a Sandbox

Example Workflow with Local Testing

Using the Virtualization Platform for Sandboxes

Using Local Virtualization for a Sandbox

Example Workflow with Local Testing

Using the Virtualization Platform for Sandboxes

Codebase Organization Patterns

Antipattern: Branch-Based Codebases

Pattern: One Trunk per Component

Pattern: Single Trunk

Antipattern: Branch-Based Codebases

Pattern: One Trunk per Component

Pattern: Single Trunk

Workflow Effectiveness

Expediting Changes

Code Reviews

Fitting Governance into the Workflow

Expediting Changes

Code Reviews

Fitting Governance into the Workflow

Conclusion

Chapter 14. Continuity with Dynamic Infrastructure

Service Continuity

True Availability

Using Dynamic Server Pools for Recovery

Software Design for Dynamic Infrastructure

Compartmentalizing for Continuity

True Availability

Using Dynamic Server Pools for Recovery

Software Design for Dynamic Infrastructure

Compartmentalizing for Continuity

Zero-Downtime Changes

Pattern: Blue-Green Replacement

Pattern: Phoenix Replacement

Practice: Reduce the Scope of Replacement

Pattern: Canary Replacement

Routing Traffic for Zero-Downtime Replacements

Zero-Downtime Changes with Data

Pattern: Blue-Green Replacement

Pattern: Phoenix Replacement

Practice: Reduce the Scope of Replacement

Pattern: Canary Replacement

Routing Traffic for Zero-Downtime Replacements

Zero-Downtime Changes with Data

Data Continuity

Replicating Data Redundantly

Regenerating Data

Delegating Data Persistence

Backing Up to Persistent Storage

Replicating Data Redundantly

Regenerating Data

Delegating Data Persistence

Backing Up to Persistent Storage

Disaster Recovery

Continuous Disaster Recovery

The DR Plan: Planning for Disaster

Practice: Prefer Rebuilding Things over Cold Standby

Continuous Monitoring through the Pipeline

Continuous Disaster Recovery

The DR Plan: Planning for Disaster

Practice: Prefer Rebuilding Things over Cold Standby

Continuous Monitoring through the Pipeline

Security

Automatically Papering over Compromises

Reliable Updates as a Defense

Provenance of Packages

Automated Hardening

Automating Security Validation in the Pipeline

The Change Pipeline as a Vulnerability

Managing Security Risks with Cloud Accounts

Automatically Papering over Compromises

Reliable Updates as a Defense

Provenance of Packages

Automated Hardening

Automating Security Validation in the Pipeline

The Change Pipeline as a Vulnerability

Managing Security Risks with Cloud Accounts

Conclusion

Service Continuity

True Availability

Using Dynamic Server Pools for Recovery

Software Design for Dynamic Infrastructure

Compartmentalizing for Continuity

True Availability

Using Dynamic Server Pools for Recovery

Software Design for Dynamic Infrastructure

Compartmentalizing for Continuity

Zero-Downtime Changes

Pattern: Blue-Green Replacement

Pattern: Phoenix Replacement

Practice: Reduce the Scope of Replacement

Pattern: Canary Replacement

Routing Traffic for Zero-Downtime Replacements

Zero-Downtime Changes with Data

Pattern: Blue-Green Replacement

Pattern: Phoenix Replacement

Practice: Reduce the Scope of Replacement

Pattern: Canary Replacement

Routing Traffic for Zero-Downtime Replacements

Zero-Downtime Changes with Data

Data Continuity

Replicating Data Redundantly

Regenerating Data

Delegating Data Persistence

Backing Up to Persistent Storage

Replicating Data Redundantly

Regenerating Data

Delegating Data Persistence

Backing Up to Persistent Storage

Disaster Recovery

Continuous Disaster Recovery

The DR Plan: Planning for Disaster

Practice: Prefer Rebuilding Things over Cold Standby

Continuous Monitoring through the Pipeline

Continuous Disaster Recovery

The DR Plan: Planning for Disaster

Practice: Prefer Rebuilding Things over Cold Standby

Continuous Monitoring through the Pipeline

Security

Automatically Papering over Compromises

Reliable Updates as a Defense

Provenance of Packages

Automated Hardening

Automating Security Validation in the Pipeline

The Change Pipeline as a Vulnerability

Managing Security Risks with Cloud Accounts

Automatically Papering over Compromises

Reliable Updates as a Defense

Provenance of Packages

Automated Hardening

Automating Security Validation in the Pipeline

The Change Pipeline as a Vulnerability

Managing Security Risks with Cloud Accounts

Conclusion

Chapter 15. Organizing for Infrastructure as Code

Evolutionary Architecture

Learning under Fire

Start with a Trailblazer Pipeline

Learning under Fire

Start with a Trailblazer Pipeline

Measuring Effectiveness

Agree on Desired Outcomes First

Choose Metrics that Help the Team

Track and Improve Cycle Time

Use Kanban to Make Work Visible

Retrospectives and Post-Mortems

Agree on Desired Outcomes First

Choose Metrics that Help the Team

Track and Improve Cycle Time

Use Kanban to Make Work Visible

Retrospectives and Post-Mortems

Organize to Empower Users

Pitfalls of the Divided Function Model

Adopt a Self-Service Model

Take Full Responsibility: You Build It, You Run It

Organizing into Cross-Functional Teams

Pitfalls of the Divided Function Model

Adopt a Self-Service Model

Take Full Responsibility: You Build It, You Run It

Organizing into Cross-Functional Teams

Governance through Continuous Change Management

Provide Solid Building Blocks

Prove Operational Readiness in the Pipeline

Sharing Ownership of Operational Quality

Review and Audit Automated Processes

Optimize for Time to Detect and Fix Problems

Provide Solid Building Blocks

Prove Operational Readiness in the Pipeline

Sharing Ownership of Operational Quality

Review and Audit Automated Processes

Optimize for Time to Detect and Fix Problems

Conclusion: It’s Never Finished

Evolutionary Architecture

Learning under Fire

Start with a Trailblazer Pipeline

Learning under Fire

Start with a Trailblazer Pipeline

Measuring Effectiveness

Agree on Desired Outcomes First

Choose Metrics that Help the Team

Track and Improve Cycle Time

Use Kanban to Make Work Visible

Retrospectives and Post-Mortems

Agree on Desired Outcomes First

Choose Metrics that Help the Team

Track and Improve Cycle Time

Use Kanban to Make Work Visible

Retrospectives and Post-Mortems

Organize to Empower Users

Pitfalls of the Divided Function Model

Adopt a Self-Service Model

Take Full Responsibility: You Build It, You Run It

Organizing into Cross-Functional Teams

Pitfalls of the Divided Function Model

Adopt a Self-Service Model

Take Full Responsibility: You Build It, You Run It

Organizing into Cross-Functional Teams

Governance through Continuous Change Management

Provide Solid Building Blocks

Prove Operational Readiness in the Pipeline

Sharing Ownership of Operational Quality

Review and Audit Automated Processes

Optimize for Time to Detect and Fix Problems

Provide Solid Building Blocks

Prove Operational Readiness in the Pipeline

Sharing Ownership of Operational Quality

Review and Audit Automated Processes

Optimize for Time to Detect and Fix Problems

Conclusion: It’s Never Finished

Index

About the Author

Colophon