The Little MongoDB Book

Karl Seguin

About This Book

License

The Little MongoDB Book book is licensed under the Attribution-NonCommercial 3.0 Unported license. You should not have paid for this book.

You are basically free to copy, distribute, modify or display the book. However, I ask that you always attribute the book to me, Karl Seguin and do not use it for commercial purposes.

You can see the full text of the license at:

http://creativecommons.org/licenses/by-nc/3.0/legalcode

About The Author

Karl Seguin is a developer with experience across various fields and technologies. He's an expert .NET and Ruby developer. He's a semi-active contributor to OSS projects, a technical writer and an occasional speaker. With respect to MongoDB, he was a core contributor to the C# MongoDB library NoRM, wrote the interactive tutorial mongly as well as the Mongo Web Admin. His free service for casual game developers, mogade.com, is powered by MongoDB.

Karl has since written The Little Redis Book

His blog can be found at http://openmymind.net, and he tweets via @karlseguin

With Thanks To

A special thanks to Perry Neal for lending me his eyes, mind and passion. You provided me with invaluable help. Thank you.

Latest Version

The latest source of this book is available at:

http://github.com/karlseguin/the-little-mongodb-book.

Introduction

It's not my fault the chapters are short, MongoDB is just easy to learn.

It is often said that technology moves at a blazing pace. It's true that there is an ever growing list of new technologies and techniques being released. However, I've long been of the opinion that the fundamental technologies used by programmers move at a rather slow pace. One could spend years learning little yet remain relevant. What is striking though is the speed at which established technologies get replaced. Seemingly overnight, long-established technologies find themselves threatened by shifts in developer focus.

Nothing could be more representative of this sudden shift than the progress of NoSQL technologies against well-established relational databases. It almost seems like one day the web was being driven by a few RDBMSes, and the next, five or so NoSQL solutions had established themselves as worthy solutions.

Even though these transitions seem to happen overnight, the reality is that they can take years to become accepted practice. The initial enthusiasm is driven by a relatively small set of developers and companies. Solutions are refined, lessons learned and seeing that a new technology is here to stay, others slowly try it for themselves. Again, this is particularly true in the case of NoSQL where many solutions aren't replacements for more traditional storage solutions, but rather address a specific need in addition to what one might get from traditional offerings.

Having said all of that, the first thing we ought to do is explain what is meant by NoSQL. It's a broad term that means different things to different people. Personally, I use it very broadly to mean a system that plays a part in the storage of data. Put another way, NoSQL (again, for me), is the belief that your persistence layer isn't necessarily the responsibility of a single system. Where relational database vendors have historically tried to position their software as a one-size-fits-all solution, NoSQL leans towards smaller units of responsibility where the best tool for a given job can be leveraged. So, your NoSQL stack might still leverage a relational database, say MySQL, but it'll also contain Redis as a persistence lookup for specific parts of the system as well as Hadoop for your intensive data processing. Put simply, NoSQL is about being open and aware of alternative, existing and additional patterns and tools for managing your data.

You might be wondering where MongoDB fits into all of this. As a document-oriented database, Mongo is a more generalized NoSQL solution. It should be viewed as an alternative to relational databases. Like relational databases, it too can benefit from being paired with some of the more specialized NoSQL solutions. MongoDB has advantages and drawbacks, which we'll cover in later parts of this book.

As you may have noticed, we use the terms MongoDB and Mongo interchangeably.

Getting Started

Most of this book will focus on core MongoDB functionality. We'll therefore rely on the MongoDB shell. While the shell is useful to learn as well as being a useful administrative tool, your code will use a MongoDB driver.

This does bring up the first thing you should know about MongoDB: its drivers. MongoDB has a number of official drivers for various languages. These drivers can be thought of as the various database drivers you are probably already familiar with. On top of these drivers, the development community has built more language/framework-specific libraries. For example, NoRM is a C# library which implements LINQ, and MongoMapper is a Ruby library which is ActiveRecord-friendly. Whether you choose to program directly against the core MongoDB drivers or some higher-level library is up to you. I point this out only because many people new to MongoDB are confused as to why there are both official drivers and community libraries - the former generally focuses on core communication/connectivity with MongoDB and the latter with more language and framework-specific implementations.

As you read through this, I encourage you to play with MongoDB to replicate what I demonstrate as well as to explore questions that you might come up with on your own. It's easy to get up and running with MongoDB, so let's take a few minutes now to set things up.

Head over to the official download page and grab the binaries from the first row (the recommended stable version) for your operating system of choice. For development purposes, you can pick either 32-bit or 64-bit.

Extract the archive (wherever you want) and navigate to the bin subfolder. Don't execute anything just yet, but know that mongod is the server process and mongo is the client shell - these are the two executables we'll be spending most of our time with.

Create a new text file in the bin subfolder named mongodb.config

Add a single line to your mongodb.config: dbpath=PATH_TO_WHERE_YOU_WANT_TO_STORE_YOUR_DATABASE_FILES. For example, on Windows you might do dbpath=c:\mongodb\data and on Linux you might do dbpath=/var/lib/mongodb/data.

Make sure the dbpath you specified exists

Launch mongod with the --config /path/to/your/mongodb.config parameter.

As an example for Windows users, if you extracted the downloaded file to c:\mongodb\ and you created c:\mongodb\data\ then within c:\mongodb\bin\mongodb.config you would specify dbpath=c:\mongodb\data\. You could then launch mongod from a command prompt via c:\mongodb\bin\mongod --config c:\mongodb\bin\mongodb.config.

Feel free to add the bin folder to your path to make all of this less verbose. MacOSX and Linux users can follow almost identical directions. The only thing you should have to change are the paths.

Hopefully you now have MongoDB up and running. If you get an error, read the output carefully - the server is quite good at explaining what's wrong.

You can now launch mongo (without the d) which will connect a shell to your running server. Try entering db.version() to make sure everything's working as it should. Hopefully you'll see the version number you installed.

Chapter 1 - The Basics

We begin our journey by getting to know the basic mechanics of working with MongoDB. Obviously this is core to understanding MongoDB, but it should also help us answer higher-level questions about where MongoDB fits.

To get started, there are six simple concepts we need to understand.

MongoDB has the same concept of a database with which you are likely already familiar (or a schema for you Oracle folks). Within a MongoDB instance you can have zero or more databases, each acting as high-level containers for everything else.

A database can have zero or more collections. A collection shares enough in common with a traditional table that you can safely think of the two as the same thing.

Collections are made up of zero or more documents. Again, a document can safely be thought of as a row.

A document is made up of one or more fields, which you can probably guess are a lot like columns.

Indexes in MongoDB function much like their RDBMS counterparts.

Cursors are different than the other five concepts but they are important enough, and often overlooked, that I think they are worthy of their own discussion. The important thing to understand about cursors is that when you ask MongoDB for data, it returns a cursor, which we can do things to, such as counting or skipping ahead, without actually pulling down data.

To recap, MongoDB is made up of databases which contain collections. A collection is made up of documents. Each document is made up of fields. Collections can be indexed, which improves lookup and sorting performance. Finally, when we get data from MongoDB we do so through a cursor whose actual execution is delayed until necessary.

Why use new terminology (collection vs. table, document vs. row and field vs. column)? Is it just to make things more complicated? The truth is that while these concepts are similar to their relational database counterparts, they are not identical. The core difference comes from the fact that relational databases define columns at the table level whereas a document-oriented database defines its fields at the document level. That is to say that each document within a collection can have its own unique set of fields. As such, a collection is a dumbed down container in comparison to a table, while a document has a lot more information than a row.

Although this is important to understand, don't worry if things aren't yet clear. It won't take more than a couple of inserts to see what this truly means. Ultimately, the point is that a collection isn't strict about what goes in it (it's schema-less). Fields are tracked with each individual document. The benefits and drawbacks of this will be explored in a future chapter.

Let's get hands-on. If you don't have it running already, go ahead and start the mongod server as well as a mongo shell. The shell runs JavaScript. There are some global commands you can execute, like help or exit. Commands that you execute against the current database are executed against the db object, such as db.help() or db.stats(). Commands that you execute against a specific collection, which is what we'll be doing a lot of, are executed against the db.COLLECTION_NAME object, such as db.unicorns.help() or db.unicorns.count().

Go ahead and enter db.help(), you'll get a list of commands that you can execute against the db object.

A small side note: Because this is a JavaScript shell, if you execute a method and omit the parentheses (), you'll see the method body rather than executing the method. I only mention it because the first time you do it and get a response that starts with function (...){ you won't be surprised. For example, if you enter db.help (without the parentheses), you'll see the internal implementation of the help method.

First we'll use the global use method to switch databases, so go ahead and enter use learn. It doesn't matter that the database doesn't really exist yet. The first collection that we create will also create the actual learn database. Now that you are inside a database, you can start issuing database commands, like db.getCollectionNames(). If you do so, you should get an empty array ([ ]). Since collections are schema-less, we don't explicitly need to create them. We can simply insert a document into a new collection. To do so, use the insert command, supplying it with the document to insert:

db.unicorns.insert({name: 'Aurora', gender: 'f', weight: 450})

The above line is executing insert against the unicorns collection, passing it a single argument. Internally MongoDB uses a binary serialized JSON format. Externally, this means that we use JSON a lot, as is the case with our parameters. If we execute db.getCollectionNames() now, we'll actually see two collections: unicorns and system.indexes. The collection system.indexes is created once per database and contains the information on our database's index.

You can now use the find command against unicorns to return a list of documents:

db.unicorns.find()

Notice that, in addition to the data you specified, there's an _id field. Every document must have a unique _id field. You can either generate one yourself or let MongoDB generate an ObjectId for you. Most of the time you'll probably want to let MongoDB generate it for you. By default, the _id field is indexed - which explains why the system.indexes collection was created. You can look at system.indexes:

db.system.indexes.find()

What you're seeing is the name of the index, the database and collection it was created against and the fields included in the index.

Now, back to our discussion about schema-less collections. Insert a totally different document into unicorns, such as:

db.unicorns.insert({name: 'Leto', gender: 'm', home: 'Arrakeen', worm: false})

And, again use find to list the documents. Once we know a bit more, we'll discuss this interesting behavior of MongoDB, but hopefully you are starting to understand why the more traditional terminology wasn't a good fit.

Mastering Selectors

In addition to the six concepts we've explored, there's one practical aspect of MongoDB you need to have a good grasp of before moving to more advanced topics: query selectors. A MongoDB query selector is like the where clause of an SQL statement. As such, you use it when finding, counting, updating and removing documents from collections. A selector is a JSON object, the simplest of which is {} which matches all documents (null works too). If we wanted to find all female unicorns, we could use {gender:'f'}.

Before delving too deeply into selectors, let's set up some data to play with. First, remove what we've put so far in the unicorns collection via: db.unicorns.remove() (since we aren't supplying a selector, it'll remove all documents). Now, issue the following inserts to get some data we can play with (I suggest you copy and paste this):

db.unicorns.insert({name: 'Horny', dob: new Date(1992,2,13,7,47), loves: ['carrot','papaya'], weight: 600, gender: 'm', vampires: 63});
db.unicorns.insert({name: 'Aurora', dob: new Date(1991, 0, 24, 13, 0), loves: ['carrot', 'grape'], weight: 450, gender: 'f', vampires: 43});
db.unicorns.insert({name: 'Unicrom', dob: new Date(1973, 1, 9, 22, 10), loves: ['energon', 'redbull'], weight: 984, gender: 'm', vampires: 182});
db.unicorns.insert({name: 'Roooooodles', dob: new Date(1979, 7, 18, 18, 44), loves: ['apple'], weight: 575, gender: 'm', vampires: 99});
db.unicorns.insert({name: 'Solnara', dob: new Date(1985, 6, 4, 2, 1), loves:['apple', 'carrot', 'chocolate'], weight:550, gender:'f', vampires:80});
db.unicorns.insert({name:'Ayna', dob: new Date(1998, 2, 7, 8, 30), loves: ['strawberry', 'lemon'], weight: 733, gender: 'f', vampires: 40});
db.unicorns.insert({name:'Kenny', dob: new Date(1997, 6, 1, 10, 42), loves: ['grape', 'lemon'], weight: 690,  gender: 'm', vampires: 39});
db.unicorns.insert({name: 'Raleigh', dob: new Date(2005, 4, 3, 0, 57), loves: ['apple', 'sugar'], weight: 421, gender: 'm', vampires: 2});
db.unicorns.insert({name: 'Leia', dob: new Date(2001, 9, 8, 14, 53), loves: ['apple', 'watermelon'], weight: 601, gender: 'f', vampires: 33});
db.unicorns.insert({name: 'Pilot', dob: new Date(1997, 2, 1, 5, 3), loves: ['apple', 'watermelon'], weight: 650, gender: 'm', vampires: 54});
db.unicorns.insert({name: 'Nimue', dob: new Date(1999, 11, 20, 16, 15), loves: ['grape', 'carrot'], weight: 540, gender: 'f'});
db.unicorns.insert({name: 'Dunx', dob: new Date(1976, 6, 18, 18, 18), loves: ['grape', 'watermelon'], weight: 704, gender: 'm', vampires: 165});

Now that we have data, we can master selectors. {field: value} is used to find any documents where field is equal to value. {field1: value1, field2: value2} is how we do an and statement. The special $lt, $lte, $gt, $gte and $ne are used for less than, less than or equal, greater than, greater than or equal and not equal operations. For example, to get all male unicorns that weigh more than 700 pounds, we could do:

db.unicorns.find({gender: 'm', weight: {$gt: 700}})
//or (not quite the same thing, but for demonstration purposes)
db.unicorns.find({gender: {$ne: 'f'}, weight: {$gte: 701}})

The $exists operator is used for matching the presence or absence of a field, for example:

db.unicorns.find({vampires: {$exists: false}})

Should return a single document. If we want to OR rather than AND we use the $or operator and assign it to an array of values we want or'd:

db.unicorns.find({gender: 'f', $or: [{loves: 'apple'}, {loves: 'orange'}, {weight: {$lt: 500}}]})

The above will return all female unicorns which either love apples or oranges or weigh less than 500 pounds.

There's something pretty neat going on in our last example. You might have already noticed, but the loves field is an array. MongoDB supports arrays as first class objects. This is an incredibly handy feature. Once you start using it, you wonder how you ever lived without it. What's more interesting is how easy selecting based on an array value is: {loves: 'watermelon'} will return any document where watermelon is a value of loves.

There are more available operators than what we've seen so far. The most flexible being $where which lets us supply JavaScript to execute on the server. These are all described in the Advanced Queries section of the MongoDB website. What we've covered so far though is the basics you'll need to get started. It's also what you'll end up using most of the time.

We've seen how these selectors can be used with the find command. They can also be used with the remove command which we've briefly looked at, the count command, which we haven't looked at but you can probably figure out, and the update command which we'll spend more time with later on.

The ObjectId which MongoDB generated for our _id field can be selected like so:

db.unicorns.find({_id: ObjectId("TheObjectId")})

In This Chapter

We haven't looked at the update command yet, or some of the fancier things we can do with find. However, we did get MongoDB up and running, looked briefly at the insert and remove commands (there isn't much more than what we've seen). We also introduced find and saw what MongoDB selectors were all about. We've had a good start and laid a solid foundation for things to come. Believe it or not, you actually know most of what there is to know about MongoDB - it really is meant to be quick to learn and easy to use. I strongly urge you to play with your local copy before moving on. Insert different documents, possibly in new collections, and get familiar with different selectors. Use find, count and remove. After a few tries on your own, things that might have seemed awkward at first will hopefully fall into place.

Chapter 2 - Updating

In chapter 1 we introduced three of the four CRUD (create, read, update and delete) operations. This chapter is dedicated to the one we skipped over: update. Update has a few surprising behaviors, which is why we dedicate a chapter to it.

Update: Replace Versus $set

In its simplest form, update takes 2 arguments: the selector (where) to use and what field to update with. If Roooooodles had gained a bit of weight, we could execute:

db.unicorns.update({name: 'Roooooodles'}, {weight: 590})

(If you've played with your unicorns collection and it doesn't have the original data anymore, go ahead and remove all documents and re-insert from the code in chapter 1.)

If this was real code, you'd probably update your records by _id, but since I don't know what _id MongoDB generated for you, we'll stick to names. Now, if we look at the updated record:

db.unicorns.find({name: 'Roooooodles'})

You should discover the first surprise of update. No document is found because the second parameter we supply is used to replace the original. In other words, the update found a document by name and replaced the entire document with the new document (the 2nd parameter). This is different than how SQL's update command works. In some situations, this is ideal and can be leveraged for some truly dynamic updates. However, when all you want to do is change the value of one, or a few fields, you are best to use MongoDB's $set modifier:

db.unicorns.update({weight: 590}, {$set: {name: 'Roooooodles', dob: new Date(1979, 7, 18, 18, 44), loves: ['apple'], gender: 'm', vampires: 99}})

This'll reset the lost fields. It won't overwrite the new weight since we didn't specify it. Now if we execute:

db.unicorns.find({name: 'Roooooodles'})

We get the expected result. Therefore, the correct way to have updated the weight in the first place is:

db.unicorns.update({name: 'Roooooodles'}, {$set: {weight: 590}})

Update Modifiers

In addition to $set, we can leverage other modifiers to do some nifty things. All of these update modifiers work on fields - so your entire document won't be wiped out. For example, the $inc modifier is used to increment a field by a certain positive or negative amount. For example, if Pilot was incorrectly awarded a couple vampire kills, we could correct the mistake by executing:

db.unicorns.update({name: 'Pilot'}, {$inc: {vampires: -2}})

If Aurora suddenly developed a sweet tooth, we could add a value to her loves field via the $push modifier:

db.unicorns.update({name: 'Aurora'}, {$push: {loves: 'sugar'}})

The Updating section of the MongoDB website has more information on the other available update modifiers.

Upserts

One of the more pleasant surprises of using update is that it fully supports upserts. An upsert updates the document if found or inserts it if not. Upserts are handy to have in certain situations and, when you run into one, you'll know it. To enable upserting we set a third parameter to true.

A mundane example is a hit counter for a website. If we wanted to keep an aggregate count in real time, we'd have to see if the record already existed for the page, and based on that decide to run an update or insert. With the third parameter omitted (or set to false), executing the following won't do anything:

db.hits.update({page: 'unicorns'}, {$inc: {hits: 1}});
db.hits.find();

However, if we enable upserts, the results are quite different:

db.hits.update({page: 'unicorns'}, {$inc: {hits: 1}}, true);
db.hits.find();

Since no documents exists with a field page equal to unicorns, a new document is inserted. If we execute it a second time, the existing document is updated and hits is incremented to 2.

db.hits.update({page: 'unicorns'}, {$inc: {hits: 1}}, true);
db.hits.find();

Multiple Updates

The final surprise update has to offer is that, by default, it'll update a single document. So far, for the examples we've looked at, this might seem logical. However, if you executed something like:

db.unicorns.update({}, {$set: {vaccinated: true }});
db.unicorns.find({vaccinated: true});

You'd expect to find all of your precious unicorns to be vaccinated. To get the behavior you desire, a fourth parameter must be set to true:

db.unicorns.update({}, {$set: {vaccinated: true }}, false, true);
db.unicorns.find({vaccinated: true});

In This Chapter

This chapter concluded our introduction to the basic CRUD operations available against a collection. We looked at update in detail and observed three interesting behaviors. First, unlike an SQL update, MongoDB's update replaces the actual document. Because of this the $set modifier is quite useful. Secondly, update supports an intuitive upsert which is particularly useful when paired with the $inc modifier. Finally, by default, update only updates the first found document.

Do remember that we are looking at MongoDB from the point of view of its shell. The driver and library you use could alter these default behaviors or expose a different API. For example, the Ruby driver merges the last two parameters into a single hash: {:upsert => false, :multi => false}. Similarly, the PHP driver, merges the last two parameters into an array: array('upsert' => false, 'multiple' => false).

Chapter 3 - Mastering Find

Chapter 1 provided a superficial look at the find command. There's more to find than understanding selectors though. We already mentioned that the result from find is a cursor. We'll now look at exactly what this means in more detail.

Field Selection

Before we jump into cursors, you should know that find takes a second optional parameter. This parameter is the list of fields we want to retrieve. For example, we can get all of the unicorns' names by executing:

db.unicorns.find(null, {name: 1});

By default, the _id field is always returned. We can explicitly exclude it by specifying {name:1, _id: 0}.

Aside from the _id field, you cannot mix and match inclusion and exclusion. If you think about it, that actually makes sense. You either want to select or exclude one or more fields explicitly.

Ordering

A few times now I've mentioned that find returns a cursor whose execution is delayed until needed. However, what you've no doubt observed from the shell is that find executes immediately. This is a behavior of the shell only. We can observe the true behavior of cursors by looking at one of the methods we can chain to find. The first that we'll look at is sort. sort works a lot like the field selection from the previous section. We specify the fields we want to sort on, using 1 for ascending and -1 for descending. For example:

//heaviest unicorns first
db.unicorns.find().sort({weight: -1})

//by unicorn name then vampire kills:
db.unicorns.find().sort({name: 1, vampires: -1})

As with a relational database, MongoDB can use an index for sorting. We'll look at indexes in more detail later on. However, you should know that MongoDB limits the size of your sort without an index. That is, if you try to sort a large result set which can't use an index, you'll get an error. Some people see this as a limitation. In truth, I wish more databases had the capability to refuse to run unoptimized queries. (I won't turn every MongoDB drawback into a positive, but I've seen enough poorly optimized databases that I sincerely wish they had a strict-mode.)

Paging

Paging results can be accomplished via the limit and skip cursor methods. To get the second and third heaviest unicorn, we could do:

db.unicorns.find().sort({weight: -1}).limit(2).skip(1)

Using limit in conjunction with sort, is a good way to avoid running into problems when sorting on non-indexed fields.

Count

The shell makes it possible to execute a count directly on a collection, such as:

db.unicorns.count({vampires: {$gt: 50}})

In reality, count is actually a cursor method, the shell simply provides a shortcut. Drivers which don't provide such a shortcut need to be executed like this (which will also work in the shell):

db.unicorns.find({vampires: {$gt: 50}}).count()

In This Chapter

Using find and cursors is a straightforward proposition. There are a few additional commands that we'll either cover in later chapters or which only serve edge cases, but, by now, you should be getting pretty comfortable working in the mongo shell and understanding the fundamentals of MongoDB.

Chapter 4 - Data Modeling

Let's shift gears and have a more abstract conversation about MongoDB. Explaining a few new terms and some new syntax is a trivial task. Having a conversation about modeling with a new paradigm isn't as easy. The truth is that most of us are still finding out what works and what doesn't when it comes to modeling with these new technologies. It's a conversation we can start having, but ultimately you'll have to practice and learn on real code.

Out of all NoSQL databases, document-oriented databases are probably the most similar to relational databases - at least when it comes to modeling. The differences which exist are subtle but that doesn't mean they aren't important.

No Joins

The first and most fundamental difference that you'll need to get comfortable with is MongoDB's lack of joins. I don't know the specific reason why some type of join syntax isn't supported in MongoDB, but I do know that joins are generally seen as non-scalable. That is, once you start to split your data horizontally, you end up performing your joins on the client (the application server) anyways. Regardless of the reasons, the fact remains that data is relational, and MongoDB doesn't support joins.

Without knowing anything else, to live in a join-less world, we have to do joins ourselves within our application's code. Essentially we need to issue a second query to find the relevant data. Setting our data up isn't any different than declaring a foreign key in a relational database. Let's give a little less focus to our beautiful unicorns and a bit more time to our employees. The first thing we'll do is create an employee (I'm providing an explicit _id so that we can build coherent examples)

db.employees.insert({_id: ObjectId("4d85c7039ab0fd70a117d730"), name: 'Leto'})

Now let's add a couple employees and set their manager as Leto:

db.employees.insert({_id: ObjectId("4d85c7039ab0fd70a117d731"), name: 'Duncan', manager: ObjectId("4d85c7039ab0fd70a117d730")});
db.employees.insert({_id: ObjectId("4d85c7039ab0fd70a117d732"), name: 'Moneo', manager: ObjectId("4d85c7039ab0fd70a117d730")});

(It's worth repeating that the _id can be any unique value. Since you'd likely use an ObjectId in real life, we'll use them here as well.)

Of course, to find all of Leto's employees, one simply executes:

db.employees.find({manager: ObjectId("4d85c7039ab0fd70a117d730")})

There's nothing magical here. In the worst cases, most of the time, the lack of join will merely require an extra query (likely indexed).

Arrays and Embedded Documents

Just because MongoDB doesn't have joins doesn't mean it doesn't have a few tricks up its sleeve. Remember when we quickly saw that MongoDB supports arrays as first class objects of a document? It turns out that this is incredibly handy when dealing with many-to-one or many-to-many relationships. As a simple example, if an employee could have two managers, we could simply store these in an array:

db.employees.insert({_id: ObjectId("4d85c7039ab0fd70a117d733"), name: 'Siona', manager: [ObjectId("4d85c7039ab0fd70a117d730"), ObjectId("4d85c7039ab0fd70a117d732")] })

Of particular interest is that, for some documents, manager can be a scalar value, while for others it can be an array. Our original find query will work for both:

db.employees.find({manager: ObjectId("4d85c7039ab0fd70a117d730")})

You'll quickly find that arrays of values are much more convenient to deal with than many-to-many join-tables.

Besides arrays, MongoDB also supports embedded documents. Go ahead and try inserting a document with a nested document, such as:

db.employees.insert({_id: ObjectId("4d85c7039ab0fd70a117d734"), name: 'Ghanima', family: {mother: 'Chani', father: 'Paul', brother: ObjectId("4d85c7039ab0fd70a117d730")}})

In case you are wondering, embedded documents can be queried using a dot-notation:

db.employees.find({'family.mother': 'Chani'})

We'll briefly talk about where embedded documents fit and how you should use them.

DBRef

MongoDB supports something known as DBRef which is a convention many drivers support. When a driver encounters a DBRef it can automatically pull the referenced document. A DBRef includes the collection and id of the referenced document. It generally serves a pretty specific purpose: when documents from the same collection might reference documents from a different collection from each other. That is, the DBRef for document1 might point to a document in managers whereas the DBRef for document2 might point to a document in employees.

Denormalization

Yet another alternative to using joins is to denormalize your data. Historically, denormalization was reserved for performance-sensitive code, or when data should be snapshotted (like in an audit log). However, with the ever-growing popularity of NoSQL, many of which don't have joins, denormalization as part of normal modeling is becoming increasingly common. This doesn't mean you should duplicate every piece of information in every document. However, rather than letting fear of duplicate data drive your design decisions, consider modeling your data based on what information belongs to what document.

For example, say you are writing a forum application. The traditional way to associate a specific user with a post is via a userid column within posts. With such a model, you can't display posts without retrieving (joining to) users. A possible alternative is simply to store the name as well as the userid with each post. You could even do so with an embedded document, like user: {id: ObjectId('Something'), name: 'Leto'}. Yes, if you let users change their name, you'll have to update each document (which is 1 extra query).

Adjusting to this kind of approach won't come easy to some. In a lot of cases it won't even make sense to do this. Don't be afraid to experiment with this approach though. It's not only suitable in some circumstances, but it can also be the right way to do it.

Which Should You Choose?

Arrays of ids are always a useful strategy when dealing with one-to-many or many-to-many scenarios. It's probably safe to say that DBRefs aren't used very often, though you can certainly experiment and play with them. That generally leaves new developers unsure about using embedded documents versus doing manual referencing.

First, you should know that an individual document is currently limited to 16 megabytes in size. Knowing that documents have a size limit, though quite generous, gives you some idea of how they are intended to be used. At this point, it seems like most developers lean heavily on manual references for most of their relationships. Embedded documents are frequently leveraged, but mostly for small pieces of data which we want to always pull with the parent document. A real world example I've used is to store an accounts document with each user, something like:

db.users.insert({name: 'leto', email: 'leto@dune.gov', account: {allowed_gholas: 5, spice_ration: 10}})

That doesn't mean you should underestimate the power of embedded documents or write them off as something of minor utility. Having your data model map directly to your objects makes things a lot simpler and often does remove the need to join. This is especially true when you consider that MongoDB lets you query and index fields of an embedded document.

Few or Many Collections

Given that collections don't enforce any schema, it's entirely possible to build a system using a single collection with a mishmash of documents. From what I've seen, most MongoDB systems are laid out similarly to what you'd find in a relational system. In other words, if it would be a table in a relational database, it'll likely be a collection in MongoDB (many-to-many join tables being an important exception).

The conversation gets even more interesting when you consider embedded documents. The example that frequently comes up is a blog. Should you have a posts collection and a comments collection, or should each post have an array of comments embedded within it? Setting aside the 16MB document size limit for the time being (all of Hamlet is less than 200KB, so just how popular is your blog?), most developers still prefer to separate things out. It's simply cleaner and more explicit.

There's no hard rule (well, aside from 16MB). Play with different approaches and you'll get a sense of what does and does not feel right.

In This Chapter

Our goal in this chapter was to provide some helpful guidelines for modeling your data in MongoDB. A starting point, if you will. Modeling in a document-oriented system is different, but not too different, than in a relational world. You have a bit more flexibility and one constraint, but for a new system, things tend to fit quite nicely. The only way you can go wrong is by not trying.

Chapter 5 - When To Use MongoDB

By now you should have a feel for where and how it might fit into your existing system. There are enough new and competing storage technologies that it's easy to get overwhelmed by all of the choices.

For me, the most important lesson, which has nothing to do with MongoDB, is that you no longer have to rely on a single solution for dealing with your data. No doubt, a single solution has obvious advantages, and for a lot projects - possibly even most - a single solution is the sensible approach. The idea isn't that you must use different technologies, but rather that you can. Only you know whether the benefits of introducing a new solution outweigh the costs.

With that said, I'm hopeful that what you've seen so far has made you see MongoDB as a general solution. It's been mentioned a couple times that document-oriented databases share a lot in common with relational databases. Therefore, rather than tiptoeing around it, let's simply state that MongoDB should be seen as a direct alternative to relational databases. Where one might see Lucene as enhancing a relational database with full text indexing, or Redis as a persistent key-value store, MongoDB is a central repository for your data.

Notice that I didn't call MongoDB a replacement for relational databases, but rather an alternative. It's a tool that can do what a lot of other tools can do. Some of it MongoDB does better, some of it MongoDB does worse. Let's dissect things a little further.

Schema-less

An oft-touted benefit of document-oriented database is that they are schema-less. This makes them much more flexible than traditional database tables. I agree that schema-less is a nice feature, but not for the main reason most people mention.

People talk about schema-less as though you'll suddenly start storing a crazy mishmash of data. There are domains and data sets which can really be a pain to model using relational databases, but I see those as edge cases. Schema-less is cool, but most of your data is going to be highly structured. It's true that having an occasional mismatch can be handy, especially when you introduce new features, but in reality it's nothing a nullable column probably wouldn't solve just as well.

For me, the real benefit of schema-less design is the lack of setup and the reduced friction with OOP. This is particularly true when you're working with a static language. I've worked with MongoDB in both C# and Ruby, and the difference is striking. Ruby's dynamism and its popular ActiveRecord implementations already reduce much of the object-relational impedance mismatch. That isn't to say MongoDB isn't a good match for Ruby, it really is. Rather, I think most Ruby developers would see MongoDB as an incremental improvement, whereas C# or Java developers would see a fundamental shift in how they interact with their data.

Think about it from the perspective of a driver developer. You want to save an object? Serialize it to JSON (technically BSON, but close enough) and send it to MongoDB. There is no property mapping or type mapping. This straightforwardness definitely flows to you, the end developer.

Writes

One area where MongoDB can fit a specialized role is in logging. There are two aspects of MongoDB which make writes quite fast. First, you can send a write command and have it return immediately without waiting for it to actually write. Secondly, with the introduction of journaling in 1.8, and enhancements made in 2.0, you can control the write behavior with respect to data durability. These settings, in addition to specifying how many servers should get your data before being considered successful, are configurable per-write, giving you a great level of control over write performance and data durability.

In addition to these performance factors, log data is one of those data sets which can often take advantage of schema-less collections. Finally, MongoDB has something called a capped collection. So far, all of the implicitly created collections we've created are just normal collections. We can create a capped collection by using the db.createCollection command and flagging it as capped:

//limit our capped collection to 1 megabyte
db.createCollection('logs', {capped: true, size: 1048576})

When our capped collection reaches its 1MB limit, old documents are automatically purged. A limit on the number of documents, rather than the size, can be set using max. Capped collections have some interesting properties. For example, you can update a document but it can't grow in size. Also, the insertion order is preserved, so you don't need to add an extra index to get proper time-based sorting.

This is a good place to point out that if you want to know whether your write encountered any errors (as opposed to the default fire-and-forget), you simply issue a follow-up command: db.getLastError(). Most drivers encapsulate this as a safe write, say by specifying {:safe => true} as a second parameter to insert.

Durability

Prior to version 1.8, MongoDB didn't have single-server durability. That is, a server crash would likely result in lost data. The solution had always been to run MongoDB in a multi-server setup (MongoDB supports replication). One of the major features added to 1.8 was journaling. To enable it add a new line with journal=true to the mongodb.config file we created when we first setup MongoDB (and restart your server if you want it enabled right away). You probably want journaling enabled (it'll be a default in a future release). Although, in some circumstances the extra throughput you get from disabling journaling might be a risk you are willing to take. (It's worth pointing out that some types of applications can easily afford to lose data).

Durability is only mentioned here because a lot has been made around MongoDB's lack of single-server durability. This'll likely show up in Google searches for some time to come. Information you find about this missing feature is simply out of date.

Full Text Search

True full text search capability is something that'll hopefully come to MongoDB in a future release. With its support for arrays, basic full text search is pretty easy to implement. For something more powerful, you'll need to rely on a solution such as Lucene/Solr. Of course, this is also true of many relational databases.

Transactions

MongoDB doesn't have transactions. It has two alternatives, one which is great but with limited use, and the other that is cumbersome but flexible.

The first is its many atomic operations. These are great, so long as they actually address your problem. We already saw some of the simpler ones, like $inc and $set. There are also commands like findAndModify which can update or delete a document and return it atomically.

The second, when atomic operations aren't enough, is to fall back to a two-phase commit. A two-phase commit is to transactions what manual dereferencing is to joins. It's a storage-agnostic solution that you do in code. Two-phase commits are actually quite popular in the relational world as a way to implement transactions across multiple databases. The MongoDB website has an example illustrating the most common scenario (a transfer of funds). The general idea is that you store the state of the transaction within the actual document being updated and go through the init-pending-commit/rollback steps manually.

MongoDB's support for nested documents and schema-less design makes two-phase commits slightly less painful, but it still isn't a great process, especially when you are just getting started with it.

Data Processing

MongoDB relies on MapReduce for most data processing jobs. It has some basic aggregation capabilities, but for anything serious, you'll want to use MapReduce. In the next chapter we'll look at MapReduce in detail. For now you can think of it as a very powerful and different way to group by (which is an understatement). One of MapReduce's strengths is that it can be parallelized for working with large sets of data. However, MongoDB's implementation relies on JavaScript, which is single-threaded. The point? For processing of large data, you'll likely need to rely on something else, such as Hadoop. Thankfully, since the two systems really do complement each other, there's a MongoDB adapter for Hadoop.

Of course, parallelizing data processing isn't something relational databases excel at either. There are plans for future versions of MongoDB to be better at handling very large sets of data.

Geospatial

A particularly powerful feature of MongoDB is its support for geospatial indexes. This allows you to store x and y coordinates within documents and then find documents that are $near a set of coordinates or $within a box or circle. This is a feature best explained via some visual aids, so I invite you to try the 5 minute geospatial interactive tutorial, if you want to learn more.

Tools and Maturity

You probably already know the answer to this, but MongoDB is obviously younger than most relational database systems. This is absolutely something you should consider, though how much it matters depends on what you are doing and how you are doing it. Nevertheless, an honest assessment simply can't ignore the fact that MongoDB is younger and the available tooling around isn't great (although the tooling around a lot of very mature relational databases is pretty horrible too!). As an example, the lack of support for base-10 floating point numbers will obviously be a concern (though not necessarily a show-stopper) for systems dealing with money.

On the positive side, drivers exist for a great many languages, the protocol is modern and simple, and development is happening at blinding speeds. MongoDB is in production at enough companies that concerns about maturity, while valid, are quickly becoming a thing of the past.

In This Chapter

The message from this chapter is that MongoDB, in most cases, can replace a relational database. It's much simpler and straightforward; it's faster and generally imposes fewer restrictions on application developers. The lack of transactions can be a legitimate and serious concern. However, when people ask where does MongoDB sit with respect to the new data storage landscape? the answer is simple: right in the middle.

Chapter 6 - MapReduce

MapReduce is an approach to data processing which has two significant benefits over more traditional solutions. The first, and main, reason it was developed is performance. In theory, MapReduce can be parallelized, allowing very large sets of data to be processed across many cores/CPUs/machines. As we just mentioned, this isn't something MongoDB is currently able to take advantage of. The second benefit of MapReduce is that you get to write real code to do your processing. Compared to what you'd be able to do with SQL, MapReduce code is infinitely richer and lets you push the envelope further before you need to use a more specialized solution.

MapReduce is a pattern that has grown in popularity, and you can make use of it almost anywhere; C#, Ruby, Java, Python and so on all have implementations. I want to warn you that at first this'll seem very different and complicated. Don't get frustrated, take your time and play with it yourself. This is worth understanding whether you are using MongoDB or not.

A Mix of Theory and Practice

MapReduce is a two-step process. First you map, and then you reduce. The mapping step transforms the inputted documents and emits a key=>value pair (the key and/or value can be complex). Then, key/value pairs are grouped by key, such that values for the same key end up in an array. The reduce gets a key and this array of values emitted for that key, and produces the final result. We'll look at each step, and the output of each step.

The example that we'll be using is to generate a report of the number of hits, per day, we get on a resource (say a webpage). This is the hello world of MapReduce. For our purposes, we'll rely on a hits collection with two fields: resource and date. Our desired output is a breakdown by resource, year, month, day and count.

Given the following data in hits:

resource     date
index        Jan 20 2010 4:30
index        Jan 20 2010 5:30
about        Jan 20 2010 6:00
index        Jan 20 2010 7:00
about        Jan 21 2010 8:00
about        Jan 21 2010 8:30
index        Jan 21 2010 8:30
about        Jan 21 2010 9:00
index        Jan 21 2010 9:30
index        Jan 22 2010 5:00

We'd expect the following output:

resource  year   month   day   count
index     2010   1       20    3
about     2010   1       20    1
about     2010   1       21    3
index     2010   1       21    2
index     2010   1       22    1

The nice thing about this type of approach to analytics is that by storing the output, reports are fast to generate and data growth is controlled (per resource that we track, we'll add at most 1 document per day.)

For the time being, focus on understanding the concept. At the end of this chapter, sample data and code will be given for you to try on your own.

The first thing to do is look at the map function. The goal of map is to make it emit a value which can be reduced. It's possible for map to emit 0 or more times. In our case, it'll always emit once (which is common). Imagine map as looping through each document in hits. For each document we want to emit a key with resource, year, month and day, and a simple value of 1:

function() {
    var key = {
        resource: this.resource,
        year: this.date.getFullYear(),
        month: this.date.getMonth(),
        day: this.date.getDate()
    };
    emit(key, {count: 1});
}

this refers to the current document being inspected. Hopefully what'll help make this clear for you is to see what the output of the mapping step is. Using our above data, the complete output would is below. The values from emit are grouped together, as arrays, by key:

{resource: 'index', year: 2010, month: 0, day: 20} => [{count: 1}, {count: 1}, {count:1}]
{resource: 'about', year: 2010, month: 0, day: 20} => [{count: 1}]
{resource: 'about', year: 2010, month: 0, day: 21} => [{count: 1}, {count: 1}, {count:1}]
{resource: 'index', year: 2010, month: 0, day: 21} => [{count: 1}, {count: 1}]
{resource: 'index', year: 2010, month: 0, day: 22} => [{count: 1}]

Understanding this intermediary step is the key to understanding MapReduce. .NET and Java developers can think of it as being of type IDictionary<object, IList<object>> (.NET) or HashMap<Object, ArrayList> (Java).

Let's change our map function in some contrived way:

function() {
    var key = {resource: this.resource, year: this.date.getFullYear(), month: this.date.getMonth(), day: this.date.getDate()};
    if (this.resource == 'index' && this.date.getHours() == 4) {
        emit(key, {count: 5});
    } else {
        emit(key, {count: 1});
    }
}

The first intermediary output would change to:

{resource: 'index', year: 2010, month: 0, day: 20} => [{count: 5}, {count: 1}, {count:1}]

Notice how each emit generates a new value which is grouped by our key.

The reduce function takes each of these intermediary results and outputs a final result. Here's what ours looks like:

function(key, values) {
    var sum = 0;
    values.forEach(function(value) {
        sum += value['count'];
    });
    return {count: sum};
};

Which would output:

{resource: 'index', year: 2010, month: 0, day: 20} => {count: 3}
{resource: 'about', year: 2010, month: 0, day: 20} => {count: 1}
{resource: 'about', year: 2010, month: 0, day: 21} => {count: 3}
{resource: 'index', year: 2010, month: 0, day: 21} => {count: 2}
{resource: 'index', year: 2010, month: 0, day: 22} => {count: 1}

Technically, the output in MongoDB is:

_id: {resource: 'index', year: 2010, month: 0, day: 20}, value: {count: 3}

Hopefully you've noticed that this is the final result we were after.

If you've really been paying attention, you might be asking yourself why we didn't simply use sum = values.length. This would seem like an efficient approach when you are essentially summing an array of 1s. The fact is that reduce isn't always called with a full and perfect set of intermediate data. For example, instead of being called with:

{resource: 'index', year: 2010, month: 0, day: 20} => [{count: 1}, {count: 1}, {count:1}]

Reduce could be called with:

{resource: 'index', year: 2010, month: 0, day: 20} => [{count: 1}, {count: 1}]
{resource: 'index', year: 2010, month: 0, day: 20} => [{count: 2}, {count: 1}]

The final output is the same (3), the path taken is slightly different. As such, reduce must always be idempotent. That is, calling reduce multiple times should generate the same result as calling it once.

We aren't going to cover it here but it's common to chain reduce methods when performing more complex analysis.

Pure Practical

With MongoDB we use the mapReduce command on a collection. mapReduce takes a map function, a reduce function and an output directive. In our shell we can create and pass a JavaScript function. From most libraries you supply a string of your functions (which is a bit ugly). First though, let's create our simple data set:

db.hits.insert({resource: 'index', date: new Date(2010, 0, 20, 4, 30)});
db.hits.insert({resource: 'index', date: new Date(2010, 0, 20, 5, 30)});
db.hits.insert({resource: 'about', date: new Date(2010, 0, 20, 6, 0)});
db.hits.insert({resource: 'index', date: new Date(2010, 0, 20, 7, 0)});
db.hits.insert({resource: 'about', date: new Date(2010, 0, 21, 8, 0)});
db.hits.insert({resource: 'about', date: new Date(2010, 0, 21, 8, 30)});
db.hits.insert({resource: 'index', date: new Date(2010, 0, 21, 8, 30)});
db.hits.insert({resource: 'about', date: new Date(2010, 0, 21, 9, 0)});
db.hits.insert({resource: 'index', date: new Date(2010, 0, 21, 9, 30)});
db.hits.insert({resource: 'index', date: new Date(2010, 0, 22, 5, 0)});

Now we can create our map and reduce functions (the MongoDB shell accepts multi-line statements, you'll see ... after hitting enter to indicate more text is expected):

var map = function() {
    var key = {resource: this.resource, year: this.date.getFullYear(), month: this.date.getMonth(), day: this.date.getDate()};
    emit(key, {count: 1});
};

var reduce = function(key, values) {
    var sum = 0;
    values.forEach(function(value) {
        sum += value['count'];
    });
    return {count: sum};
};

We can pass our map and reduce functions to the mapReduce command by running:

db.hits.mapReduce(map, reduce, {out: {inline:1}})

If you run the above, you should see the desired output. Setting out to inline means that the output from mapReduce is immediately streamed back to us. This is currently limited for results that are 16 megabytes or less. We could instead specify {out: 'hit_stats'} and have the results stored in the hit_stats collections:

db.hits.mapReduce(map, reduce, {out: 'hit_stats'});
db.hit_stats.find();

When you do this, any existing data in hit_stats is lost. If we did {out: {merge: 'hit_stats'}} existing keys would be replaced with the new values and new keys would be inserted as new documents. Finally, we can out using a reduce function to handle more advanced cases (such an doing an upsert).

The third parameter takes additional options, for example we could filter, sort and limit the documents that we want analyzed. We can also supply a finalize method to be applied to the results after the reduce step.

In This Chapter

This is the first chapter where we covered something truly different. If it made you uncomfortable, remember that you can always use MongoDB's other aggregation capabilities for simpler scenarios. Ultimately though, MapReduce is one of MongoDB's most compelling features. The key to really understanding how to write your map and reduce functions is to visualize and understand the way your intermediary data will look coming out of map and heading into reduce.

Chapter 7 - Performance and Tools

In this last chapter, we look at a few performance topics as well as some of the tools available to MongoDB developers. We won't dive deeply into either topic, but we will examine the most important aspects of each.

Indexes

At the very beginning we saw the special system.indexes collection which contains information on all the indexes in our database. Indexes in MongoDB work a lot like indexes in a relational database: they help improve query and sorting performance. Indexes are created via ensureIndex:

// where "name" is the fieldname
db.unicorns.ensureIndex({name: 1});

And dropped via dropIndex:

db.unicorns.dropIndex({name: 1});

A unique index can be created by supplying a second parameter and setting unique to true:

db.unicorns.ensureIndex({name: 1}, {unique: true});

Indexes can be created on embedded fields (again, using the dot-notation) and on array fields. We can also create compound indexes:

db.unicorns.ensureIndex({name: 1, vampires: -1});

The order of your index (1 for ascending, -1 for descending) doesn't matter for a single key index, but it can have an impact for compound indexes when you are sorting or using a range condition.

The indexes page has additional information on indexes.

Explain

To see whether or not your queries are using an index, you can use the explain method on a cursor:

db.unicorns.find().explain()

The output tells us that a BasicCursor was used (which means non-indexed), that 12 objects were scanned, how long it took, what index, if any, was used as well as a few other pieces of useful information.

If we change our query to use an index, we'll see that a BtreeCursor was used, as well as the index used to fulfill the request:

db.unicorns.find({name: 'Pilot'}).explain()

Fire And Forget Writes

We previously mentioned that, by default, writes in MongoDB are fire-and-forget. This can result in some nice performance gains at the risk of losing data during a crash. An interesting side effect of this type of write is that an error is not returned when an insert/update violates a unique constraint. In order to be notified about a failed write, one must call db.getLastError() after an insert. Many drivers abstract this detail away and provide a way to do a safe write - often via an extra parameter.

Unfortunately, the shell automatically does safe inserts, so we can't easily see this behavior in action.

Sharding

MongoDB supports auto-sharding. Sharding is an approach to scalability which separates your data across multiple servers. A naive implementation might put all of the data for users with a name that starts with A-M on server 1 and the rest on server 2. Thankfully, MongoDB's sharding capabilities far exceed such a simple algorithm. Sharding is a topic well beyond the scope of this book, but you should know that it exists and that you should consider it, should your needs grow beyond a single server.

Replication

MongoDB replication works similarly to how relational database replication works. Writes are sent to a single server, the master, which then synchronizes itself to one or more other servers, the slaves. You can control whether reads can happen on slaves or not, which can help distribute your load at the risk of reading slightly stale data. If the master goes down, a slave can be promoted to act as the new master. Again, MongoDB replication is outside the scope of this book.

While replication can improve performance (by distributing reads), its main purpose is to increase reliability. Combining replication with sharding is a common approach. For example, each shard could be made up of a master and a slave. (Technically you'll also need an arbiter to help break a tie should two slaves try to become masters. But an arbiter requires very few resources and can be used for multiple shards.)

Stats

You can obtain statistics on a database by typing db.stats(). Most of the information deals with the size of your database. You can also get statistics on a collection, say unicorns, by typing db.unicorns.stats(). Again, most of this information relates to the size of your collection.

Web Interface

Included in the information displayed on MongoDB's startup was a link to a web-based administrative tool (you might still be able to see it if you scroll your command/terminal window up to the point where you started mongod). You can access this by pointing your browser to http://localhost:28017/. To get the most out of it, you'll want to add rest=true to your config and restart the mongod process. The web interface gives you a lot of insight into the current state of your server.

Profiler

You can enable the MongoDB profiler by executing:

db.setProfilingLevel(2);

With it enabled, we can run a command:

db.unicorns.find({weight: {$gt: 600}});

And then examine the profiler:

db.system.profile.find()

The output tells us what was run and when, how many documents were scanned, and how much data was returned.

You can disable the profiler by calling setProfileLevel again but changing the argument to 0. Another option is to specify 1 which will only profile queries that take more than 100 milliseconds. Or, you can specify the minimum time, in milliseconds, with a second parameter:

//profile anything that takes more than 1 second
db.setProfilingLevel(1, 1000);

Backups and Restore

Within the MongoDB bin folder is a mongodump executable. Simply executing mongodump will connect to localhost and backup all of your databases to a dump subfolder. You can type mongodump --help to see additional options. Common options are --db DBNAME to back up a specific database and --collection COLLECTIONNAME to back up a specific collection. You can then use the mongorestore executable, located in the same bin folder, to restore a previously made backup. Again, the --db and --collection can be specified to restore a specific database and/or collection.

For example, to back up our learn database to a backup folder, we'd execute (this is its own executable which you run in a command/terminal window, not within the mongo shell itself):

mongodump --db learn --out backup

To restore only the unicorns collection, we could then do:

mongorestore --collection unicorns backup/learn/unicorns.bson

It's worth pointing out that mongoexport and mongoimport are two other executables which can be used to export and import data from JSON or CSV. For example, we can get a JSON output by doing:

mongoexport --db learn -collection unicorns

And a CSV output by doing:

mongoexport --db learn -collection unicorns --csv -fields name,weight,vampires

Note that mongoexport and mongoimport cannot always represent your data. Only mongodump and mongorestore should ever be used for actual backups.

In This Chapter

In this chapter we looked at various commands, tools and performance details of using MongoDB. We haven't touched on everything, but we've looked at the most common ones. Indexing in MongoDB is similar to indexing with relational databases, as are many of the tools. However, with MongoDB, many of these are to the point and simple to use.

Conclusion

You should have enough information to start using MongoDB in a real project. There's more to MongoDB than what we've covered, but your next priority should be putting together what we've learned, and getting familiar with the driver you'll be using. The MongoDB website has a lot of useful information. The official MongoDB user group is a great place to ask questions.

NoSQL was born not only out of necessity, but also out of an interest in trying new approaches. It is an acknowledgement that our field is ever-advancing and that if we don't try, and sometimes fail, we can never succeed. This, I think, is a good way to lead our professional lives.